Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Robust Half-Metallicity in Quaternary Heusler Compounds KSrNZ (Z = O, S, and Se)

The first principle calculations based on density functional theory using full potential linearized augmented plane wave method was performed on the quaternary Heusler alloys KSrNZ (Z = O, S, and Se). Studies on structural properties showed that quaternary Heusler alloys KSrNZ (Z = O, S, and Se) were stable in Y{sub I}-type structure. Furthermore, values of formation energies confirmed that these alloys may be synthesized experimentally. Verification of electronic properties resulted that KSrNO, KSrNS, and KSrNSe compounds were half-metals at equilibrium lattice constants with majority band gaps of 4.61, 3.82, and 3.51 eV, respectively. KSrNZ (Z = O, S, and Se) compounds maintained half-metallic behavior in relatively wide ranges of lattice constant under uniform strain distortion. This indicates that these compounds are promising materials for future spintronic applications. Furthermore, the origin of half-metallic characteristic was verified using electronic density of states. Calculations of magnetic properties showed that the total magnetic moments of KSrNZ (Z = O, S, and Se) were obtained equal to 2 μ{sub B} satisfying the famous Slater-Pauling rule (M{sub tot}= 12-Z{sub tot}).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CsMgCl{sub 3}: A promising cross luminescence material

Full-potential linearized augmented plane wave method has been used to study the cross luminescence of halide scintillators. The electronic structure and optical properties of alkali halides such as CsMgCl{sub 3}, CsCaCl{sub 3}, and CsSrCl{sub 3} are presented. One of the major criteria for the cross luminescence to happen is the energy difference between valence band and next deeper core valence band being lesser when compared to energy gap of the compound, so that radiative electronic transition may occur between core valence band and valence band which might lead to fast scintillation. We found this criterion to be satisfied in these compounds leading to cross luminescence. The presence of high energy peaks in the absorption spectra indicates the creation of holes in the core valence band, which is an essential criterion for the occurrence of cross luminescence. The electronic structure, and optical properties studies clearly indicate CsMgCl{sub 3}, CsCaCl{sub 3}, and CsSrCl{sub 3} to be cross luminescence materials comparable to CsCl which is one of the well known fast scintillators. In addition, CsMgCl{sub 3} is found to be better among the studied compounds with optical isotropy though the compound is structurally anisotropic. - Graphical abstract: Absorption spectra of CsMCl{sub 3} (M=Mg, Ca, and Sr) along with CsCl, indicating both the spectra are similar in the lower energy region. - Highlights: • These are cross valence luminescence (CVL) materials with short day time of the order of nanosecond. • Chemical bonding of these compounds studied observed the ionic nature. • These are fast scintillators comparable to their binary halide. • CsMgCl{sub 3} good scintillator with optically isotropic nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A facile synthesis of ZnWO{sub 4} nanoparticles by microwave assisted technique and its application in photocatalysis

Highlights: ► Nanocrystalline ZnWO{sub 4} particles were successfully prepared by a microwave method. ► Spherical morphology with a 10 nm size. ► The band is 3.4 eV. ► The photodegradation of RhB was 95% within 25 min. - Abstract: A simple microwave assisted technique has been successfully developed to synthesize ZnWO{sub 4} nanoparticles. The X-ray diffraction results indicated that the synthesized nanoparticles exhibited only wolframite structure. Structural, morphological and optical properties of ZnWO{sub 4} nanoparticles have been analyzed by XRD, SEM, TEM EDAX, UV–vis and FT-IR spectral measurements. The transmission electron microscopy (TEM) image revealed that particle size of ZnWO{sub 4} nanoparticles was found to be 10 nm, the band-gap of ZnWO{sub 4} nanoparticles was found to be 3.4 eV. The photocatalytic activities for aqueous Rhodamine B and Methylene Blue samples were investigated and observed that ZnWO{sub 4} nanoparticles exhibited highly enhanced photocatalytic activity towards RhB than MB.

36 MATERIALS SCIENCE↗

Novel superconducting structures of BH 2 under high pressure

The crystal structures of boron hydrides in a pressure range of 50–400 GPa were studied using the genetic algorithm (GA) method combined with first-principles density functional theory calculations. BH 4 and BH 5 are predicted to be thermodynamically unstable. Two new BH 2 structures with Cmcm and C 2/ c space group symmetries, respectively, were predicted, in which the B atoms tend to form two-dimensional sheets. The calculated band structures showed that in the pressure range of 50–150 GPa, the Cmcm -BH 2 phase has very small gaps, while the C 2/ c -BH 2 phase at 200–400 GPa is metallic. In conclusion, the superconductivity of the C 2/ c -BH 2 structure was also investigated, and electron–phonon coupling calculations revealed that the estimated T c values of C 2/ c -BH 2 are about 28.18–37.31 K at 250 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable one-dimensional plasma photonic crystals in dielectric barrier discharge

A tunable one-dimensional plasma photonic crystal is obtained by using a dielectric barrier discharge with two liquid electrodes. It is formed by the self-organization of the filaments, rather than that in an artificial array of electrodes. The dispersion relations of the plasma photonic crystals are calculated by solving the Helmholtz equation using a method analogous to Kronig-Penney's problem. The photonic band diagrams of the plasma photonic crystals are studied when changing the filling factor, the lattice constant, and the electron density, based on the experimental results. The critical electron density is given, beyond which the plasma photonic crystal will have a remarkable band structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Superhydrophilic graphite surfaces and water-dispersible graphite colloids by electrochemical exfoliation

Superhydrophilic graphite surfaces and water-dispersible graphite colloids are obtained by electrochemical exfoliation with hydrophobic graphite electrodes. Such counterintuitive characteristics are caused by partial oxidation and investigated by examining both graphite electrodes and exfoliated particles after electrolysis. The extent of surface oxidation can be explored through contact angle measurement, scanning electron microscope, electrical sheet resistance, x-ray photoelectron spectroscopy, zeta-potential analyzer, thermogravimetric analysis, UV-visible, and Raman spectroscopy. The degree of wettability of the graphite anode can be altered by the electrolytic current and time. The water contact angle declines generally with increasing the electrolytic current or time. After a sufficient time, the graphite anode becomes superhydrophilic and its hydrophobicity can be recovered by peeling with adhesive tape. This consequence reveals that the anodic graphite is oxidized by oxygen bubbles but the oxidation just occurs at the outer layers of the graphite sheet. Moreover, the characteristics of oxidation revealed by UV peak shift, peak ratio between D and G bands, and negative zeta-potential indicate the presence of graphite oxide on the outer shell of the exfoliated colloids. However, thermogravimetric analysis for the extent of decomposition of oxygen functional groups verifies that the amount of oxygen groups is significantly less than that of graphite oxide prepared via Hummer method. The structure of this partially oxidized graphite may consist of a graphite core covered with an oxidized shell. The properties of the exfoliated colloids are also influenced by pH of the electrolytic solution. As pH is increased, the extent of oxidation descends and the thickness of oxidized shell decreases. Those results reveal that the degree of oxidation of exfoliated nanoparticles can be manipulated simply by controlling pH.

36 MATERIALS SCIENCE↗

Net electron-phonon scattering rates in InN/GaN multiple quantum wells: The effects of an energy dependent acoustic deformation potential

The rates of charge carrier relaxation by phonon emission are of substantial importance in the field of hot carrier solar cell, primarily in investigation of mechanisms to slow down hot carrier cooling. In this work, energy and momentum resolved deformation potentials relevant to electron-phonon scattering are computed for wurtzite InN and GaN as well as an InN/GaN multiple quantum well (MQW) superlattice using ab-initio methods. These deformation potentials reveal important features such as discontinuities across the electronic bandgap of the materials and variations over tens of eV. The energy dependence of the deformation potential is found to be very similar for wurtzite nitrides despite differences between the In and Ga pseudopotentials and their corresponding electronic band structures. Charge carrier relaxation by this mechanism is expected to be minimal for electrons within a few eV of the conduction band edge. However, hole scattering at energies more accessible to excitation by solar radiation is possible between heavy and light hole states. Moderate reductions in overall scattering rates are observed in MQW relative to the bulk nitride materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Simple Numerical Method for Determining the Energy Spectrum of Charge Carriers in Semiconductor Heterostructures

A simple numerical method for determining the energy spectrum and wave functions of charge carriers in semiconductor heterostructures (quantum wells, wires, dots, and superlattices) is proposed that employs the effective mass approximation in the general case of multiband kp Hamiltonian corresponding to the Γ point of the Brillouin zone. The method is based on the Fourier transform for structures with periodic potential. For single heterostructures, this periodicity is introduced artificially. In the framework of the proposed approach, the effective matrix Hamiltonian of a heterostructure can be written in two unitarily-equivalent a- and k-representations. As an example, single-band kp models of a heterostructure with one parabolic, triangular, or rectangular quantum well are considered and the influence of interfacial kp corrections on the behavior of envelope functions at sharp heteroboundaries is studied.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Haro 11: Where is the Lyman Continuum Source?

Identifying the mechanism by which high-energy Lyman continuum (LyC) photons escaped from early galaxies is one of the most pressing questions in cosmic evolution. Haro 11 is the best known local LyC-leaking galaxy, providing an important opportunity to test our understanding of LyC escape. The observed LyC emission in this galaxy presumably originates from one of the three bright, photoionizing knots known as A, B, and C. It is known that Knot C has strong Ly α emission, and Knot B hosts an unusually bright ultraluminous X-ray source, which may be a low-luminosity active galactic nucleus. To clarify the LyC source, we carry out ionization-parameter mapping (IPM) by obtaining narrow-band imaging from the Hubble Space Telescope WFC3 and ACS cameras to construct spatially resolved ratio maps of [O iii]/[O ii] emission from the galaxy. IPM traces the ionization structure of the interstellar medium and allows us to identify optically thin regions. To optimize the continuum subtraction, we introduce a new method for determining the best continuum scale factor derived from the mode of the continuum-subtracted, image flux distribution. We find no conclusive evidence of LyC escape from Knots B or C, but instead we identify a high-ionization region extending over at least 1 kpc from Knot A. This knot shows evidence of an extremely young age (≲1 Myr), perhaps containing very massive stars (>100 M {sub ⊙}). It is weak in Ly α , so if it is confirmed as the LyC source, our results imply that LyC emission may be independent of Ly α emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of temperature on the electronic instability and the crystalline phase change at low temperature of V3Si type compounds

Equations assuming a Jahn-Teller type effect for the d band electrons in V3Si compounds are given, and the results of free-energy change calculations by using some approximations based on these equations are depicted. The tetragonal structure is converted to cubic as the temperature rises past T sub m which is calculated as 13 K. by the Batterman-Barrett method and is measured to be 20-5 K. Other parameters such as change of C sub p with temperature are predicted better.

Labbe, J.↗

Reduction of the radar cross section of arbitrarily shaped cavity structures

The problem of the reduction of the radar cross section (RCS) of open-ended cavities was studied. The issues investigated were reduction through lossy coating materials on the inner cavity wall and reduction through shaping of the cavity. A method was presented to calculate the RCS of any arbitrarily shaped structure in order to study the shaping problem. The limitations of this method were also addressed. The modal attenuation was studied in a multilayered coated waveguide. It was shown that by employing two layers of coating, it was possible to achieve an increase in both the magnitude of attenuation and the frequency band of effectiveness. The numerical method used in finding the roots of the characteristic equation breaks down when the coating thickness is very lossy and large in terms of wavelength. A new method of computing the RCS of an arbitrary cavity was applied to study the effects of longitudinal bending on RCS reduction. The ray and modal descriptions for the fields in a parallel plate waveguide were compared. To extend the range of validity of the Shooting and Bouncing Ray (SBR) method, the simple ray picture must be modified to account for the beam blurring.

Chou, R.↗

Structural, electronic and optical properties of novel carbonate fluorides ABCO{sub 3}F (A=K, Rb, Cs; B=Ca, Sr)

In the present study, we performed first principles calculations on the electronic and optical properties of layered alkali–alkaline earth carbonate fluorides which attract attention in the domain of nonlinear optics. The calculated lattice parameters and volumes with and without inclusion of van der Waals (vdW) correction methods to standard density functional methods were compared with experiments. We observed that vdW interactions are predominant in RbCaCO{sub 3}F and CsCaCO{sub 3}F as compared with other computed compounds. The calculated bulk modulus from single crystal elastic constants reveals that these materials are all relatively harder than the KH{sub 2}PO{sub 4} (KDP) crystal. We also found that these materials are wide band gap insulators as obtained from Tran–Blaha modified Becke–Johnson potential. The linear optical properties such as dielectric function, refractive indices, birefringence and absorption spectra are presented. Finally, the calculated birefringence values indicate that these crystals could be promising for producing phase matching in the deep ultra-violet region. - Graphical abstract: The co- and anti-parallel alignment of CO{sub 3} groups leads to larger and smaller SHG coefficients in (a) KCaCO{sub 3}F, (b) KSrCO{sub 3}F, (c) RbSrCO{sub 3}F, (d) RbCaCO{sub 3}F, and (e) CsCaCO{sub 3}F. - Highlights: • Effect of van der Waals interactions on structural properties. • Single-crystalline elastic constants and mechanical stability. • Electronic properties. • Linear optical properties. • Comparison of present computed compounds with other well known materials in non-linear optical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, optical, and magnetic properties of (Co, Cu)-codoped ZnO films with different Co concentrations

Zn{sub 0.99-x}Co{sub x}Cu{sub 0.01}O films with different Co concentrations from 0% to 20% were fabricated by a sol-gel method. Moderate Co doping is found to improve the surface uniformity and crystal quality of the films, and causes a redshift of the band edge of Zn(Co,Cu) films. X-ray photoelectron spectroscopy reveals that the introduction of Co ions causes the valence state of Cu to change from +2 to +1; while at Co concentrations lower than 10%, the Co exists in the +2 valence state. Strong blue emission at ∼420 and 440 nm are observed, decreasing with increasing Co concentration, but becoming strong again as the concentration is increased to 20%. Enhanced room-temperature ferromagnetism is observed for the (Co, Cu)-codoped ZnO films at Co concentrations lower than 10%. These interesting magnetic properties are explained based on charge transfer, together with the defect-related model for ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adsorption geometry, conformation, and electronic structure of 2H-octaethylporphyrin on Ag(111) and Fe metalation in ultra high vacuum

Due to the growing interest in the ferromagnetic properties of Fe-octaethylporphyrins (Fe-OEP) for applications in spintronics, methods to produce stable Fe-porphyrins with no Cl atoms are highly demanded. Here, we demonstrate the formation of Fe-OEP layers on Ag(111) single crystal by the ultra high vacuum in situ metalation of the free-base 2H-2,3,7,8,12,13,17,18-octaethylporphyrin (2H-OEP) molecules. The metalation proceeds exactly as in the case of 2H-5,10,15,20-tetraphenylporphyrin (2H-TPP) on the same substrate. An extensive surface characterization by means of X-ray photoemission spectroscopy, valence band photoemission, and NEXAFS with synchrotron radiation light provides information on molecular conformation and electronic structure in the monolayer and multilayer cases. We demonstrate that the presence of the ethyl groups affects the tilt of the adsorbed molecules, the conformation of the macrocycle, and the polarization screening in multilayers, but has only a minor effect in the metalation process with respect to 2H-TPP.

36 MATERIALS SCIENCE↗

First-principles study of structural, electronic, vibrational, dielectric and elastic properties of tetragonal Ba₂YTaO₆

We report first-principles study of structural, electronic, vibrational, dielectric, and elastic properties of Ba₂YTaO₆, a pinning material in high temperature superconductors (HTS), by using density functional theory. By using different exchange-correlation potentials, the accuracy of the calculated lattice constants of Ba₂YTaO₆ has been achieved with GGA-RPBE, since many important physical quantities crucially depend on change in volume. We have calculated the electronic band structure dispersion, total and partial density of states to study the band gap origin and found that Ba₂YTaO₆ is an insulator with a direct band gap of 3.50 eV. From Mulliken population and charge density studies, we conclude that Ba₂YTaO₆ have a mixed ionic-covalent character. Moreover, the vibrational properties, born effective charges, and the dielectric permittivity tensor have been calculated using linear response method. Vibrational spectrum determined through our calculations agrees well with the observed Raman spectrum, and allows assignment of symmetry labels to modes. We perform a detailed analysis of the contribution of the various infrared-active modes to the static dielectric constant to explain its anisotropy, while electronic dielectric tensor of Ba₂YTaO₆ is nearly isotropic, and found that static dielectric constant is in good agreement with experimental value. The six independent elastic constants were calculated and found that tetragonal Ba₂YTaO₆ is mechanically stable. Other elastic properties, including bulk modulus, shear modulus, Young's modulus, Poisson's ratio, and elastic anisotropy ratios are also investigated and found that Poisson's ratio and Young's modulus of Ba₂YTaO₆ are similar to that of other pinning materials in HTS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topotactic synthesis of strontium cobalt oxyhydride thin film with perovskite structure

The substitution of hydride anions (H{sup −}) into transition metal oxides has recently become possible through topotactic reactions or high-pressure synthesis methods. However, the fabrication of oxyhydrides is still difficult because of their inherently less-stable frameworks. In this study, we successfully fabricated perovskite SrCoO{sub x}H{sub y} thin films via the topotactic hydride doping of brownmillerite SrCoO{sub 2.5} epitaxial thin films with CaH{sub 2}. The perovskite-type cation framework was maintained during the topotactic treatment owing to epitaxial stabilization. Structural and chemical analyses accompanied by X-ray absorption spectroscopy measurements revealed that the doped hydride ions form a two-dimensional network of Co-H{sup −}-Co bonds, in contrast to other reported perovskite oxyhydrides, SrMO{sub 3−x}H{sub x} (M = Cr, Ti, V). The SrCoO{sub x}H{sub y} thin film exhibited insulating behavior and had a direct band gap of 2.1 eV. Thus, topotactic hydride doping of transition-metal-oxide thin films on suitable substrates is a promising method for the synthesis of new transition metal oxyhydrides.

36 MATERIALS SCIENCE↗

Optoelectronically probing the density of nanowire surface trap states to the single state limit

Surface trap states play a dominant role in the optoelectronic properties of nanoscale devices. Understanding the surface trap states allows us to properly engineer the device surfaces for better performance. But characterization of surface trap states at nanoscale has been a formidable challenge using the traditional capacitive techniques. Here, we demonstrate a simple but powerful optoelectronic method to probe the density of nanowire surface trap states to the single state limit. In this method, we choose to tune the quasi-Fermi level across the bandgap of a silicon nanowire photoconductor, allowing for capture and emission of photogenerated charge carriers by surface trap states. The experimental data show that the energy density of nanowire surface trap states is in a range from 10{sup 9 }cm{sup −2}/eV at deep levels to 10{sup 12 }cm{sup −2}/eV near the conduction band edge. This optoelectronic method allows us to conveniently probe trap states of ultra-scaled nano/quantum devices at extremely high precision.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum sensing effect of electron tunneling in DQD/analyte complex

We investigate electron tunneling between quantum dots and molecules to propose a quantum sensor. This sensor consists of double quantum dots (DQD) with energy levels specifically tailored to mirror those of the target analyte. By analyzing the spectral distribution of electron localizations in the DQD system, we can delineate the analyte’s spectrum and deduce its composition by comparing it with a reference sample. To understand electron tunneling dynamics within the DQD/analyte complex, we performed three-dimensional computational modeling applying the effective potential approach to the InAs/GaAs heterostructure. In this modeling, we mimicked the analyte spectrum by utilizing a quantum well characterized by a quasi-discrete spectrum. Our calculations reveal the inherent potential of utilizing this method as a highly sensitive and selective sensor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗