Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Center Networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Comprehensive Phase Behavior of Poly(isoprene-b-styrene-b-ethylene oxide) Triblock Copolymers

The phase behavior of 44 poly(isoprene-b-styrene-b-ethylene oxide) (ISO) linear triblock copolymer melts was investigated at weak to intermediate segregation strengths and spanning a comprehensive range of compositions. Phases were characterized by a combination of experimental techniques, including small-angle X-ray scattering, dynamic mechanical spectroscopy, transmission electron microscopy, and birefringence measurements. Combined with our previous results, six different stable ordered state symmetries have been identified: lamellae (LAM), Fddd orthorhombic network (O{sup 70}), double gyroid (Q{sup 230}), alternating gyroid (Q{sup 214}), hexagonal (HEX), and body-centered cubic (BCC). The phase map of ISO specimens was found to be somewhat asymmetric around the f{sub I} = f{sub O} isopleth. This work provides a guide for theoretical studies and gives insight into the intricate effects of various parameters on the self-assembly of ABC triblock copolymers. Experimental SAXS data evaluated with a simple scattering intensity model show that local mixing varies continuously across the phase map between states of two- and three-domain segregation.

36 MATERIALS SCIENCE↗

Energy Distribution of the Galactic Center Excess’s Sources

The Galactic Center Excess (GCE) may yet herald the discovery of annihilating dark matter. Weighing against that conclusion are analyses showing evidence for dim point sources within the spatial structure of the emission. Because of technical limitations these analyses are purely spatial with all spectral information that could disentangle the excess from astrophysical backgrounds discarded. Here, we demonstrate that a neural network simulation-based inference approach can jointly analyze the spatial and spectra data. The addition is profound: energy information drives the putative point sources to be significantly dimmer, indicating either the GCE is truly diffuse in nature or made of an exceptionally large number of sources. Quantitatively, for our best fit background model, the excess is essentially consistent with Poisson emission as predicted by dark matter. If due to point sources, our median prediction is O(10^{5}) sources, or more than 35 000 at 90% confidence-both orders of magnitude larger than the hundreds preferred by earlier point-source analyses of the GCE, although variations allowed by background systematics could reduce the required number of sources by roughly an order of magnitude.

List, Florian↗

Trip Energy Estimation Methodology and Model Based on Real-World Driving Data for Green-Routing Applications

A data-informed model to predict energy use for a proposed vehicle trip has been developed in this paper. The methodology leverages roughly one million miles of real-world driving data to generate the estimation model. Driving is categorized at the sub-trip level by average speed, road gradient, and road network geometry, then aggregated by category. An average energy consumption rate is determined for each category, creating an energy rate look-up table. Proposed vehicle trips are then categorized in the same manner, and estimated energy rates are appended from the look-up table. The methodology is robust and applicable to a wide range of driving data. The model has been trained on vehicle travel profiles from the Transportation Secure Data Center at the National Renewable Energy Laboratory and validated against on-road fuel consumption data from testing in Phoenix, Arizona. When compared against the detailed on-road conventional vehicle fuel consumption test data, the energy estimation model accurately predicted which route would consume less fuel over a dozen different tests. When compared against a larger set of real-world origin-destination pairs, it is estimated that implementing the present methodology should accurately select the route that consumes the least fuel 90% of the time. The model results can be used to inform control strategies in routing tools, such as change in departure time, alternate routing, and alternate destinations to reduce energy consumption. This work provides a highly extensible framework that allows the model to be tuned to a specific driver or vehicle type.

33 ADVANCED PROPULSION SYSTEMS↗

Estimating the urban bias of surface shelter temperatures using upper-air and satellite data. Part 2: Estimation of the urban bias

A methodology is presented for estimating the urban bias of surface shelter temperatures due to the effect of the urban heat island. Multiple regression techniques were used to predict surface shelter temperatures based on the time period 1986-89 using upper-air data from the European Centre for Medium-Range Weather Forecasts (ECMWF) to represent the background climate, site-specific data to represent the local landscape, and satellite-derived data -- the normalized difference vegetation index (NDVI) and the Defense Meteorological Satellite Program (DMSP) nighttime brightness data -- to represent the urban and rural landscape. Local NDVI and DMSP values were calculated for each station using the mean NDVI and DMSP values from a 3 km x 3 km area centered over the given station. Regional NDVI and DMSP values were calculated to represent a typical rural value for each station using the mean NDVI and DMSP values from a 1 deg x 1 deg latitude-longitude area in which the given station was located. Models for the United States were then developed for monthly maximum, mean, and minimum temperatures using data from over 1000 stations in the U.S. Cooperative (COOP) Network and for monthly mean temperatures with data from over 1150 stations in the Global Historical Climate Network (GHCN). Local biases, or the differences between the model predictions using the observed NDVI and DMSP values, and the predictions using the background regional values were calculated and compared with the results of other research. The local or urban bias of U.S. temperatures, as derived from all U.S. stations (urban and rural) used in the models, averaged near 0.40 C for monthly minimum temperatures, near 0.25 C for monthly mean temperatures, and near 0.10 C for monthly maximum temperatures. The biases of monthly minimum temperatures for individual stations ranged from near -1.1 C for rural stations to 2.4 C for stations from the largest urban areas. The results of this study indicate minimal problems for global application once global NDVI and DMSP data become available.

Epperson, David L.↗

Remote Diagnosis of the International Space Station Utilizing Telemetry Data

Modern systems such as fly-by-wire aircraft, nuclear power plants, manufacturing facilities, battlefields, etc., are all examples of highly connected network enabled systems. Many of these systems are also mission critical and need to be monitored round the clock. Such systems typically consist of embedded sensors in networked subsystems that can transmit data to central (or remote) monitoring stations. Moreover, many legacy are safety systems were originally not designed for real-time onboard diagnosis, but a critical and would benefit from such a solution. Embedding additional software or hardware in such systems is often considered too intrusive and introduces flight safety and validation concerns. Such systems can be equipped to transmit the sensor data to a remote-processing center for continuous health monitoring. At Qualtech Systems, we are developing a Remote Diagnosis Server (RDS) that can support multiple simultaneous diagnostic sessions from a variety of remote subsystems.

Deb, Somnath↗

Validation of Envisat Ozone Data Products using Satellite and Ground Based Data

The Envisat chemistry instruments provide an opportunity to continue the ozone data sets produced by TOMS, SBUV, HALOE, and SAGE. These data sets have already been extensively validated and are assured to be of high accuracy. Continuity and consistency of data sets among the various satellite instruments as well as ground networks is essential for detecting an ozone recovery and climate change. Our objective, as part of the Envisat CaWal program, is to validate SCIAMACHY, MIPAS, and GOMOS ozone products using these heritage instruments. In addition we plan to validate SCIAMACHY Level 1 radiance using heritage satellite data and ground observations using a radiative transfer model. Ground based data included US ozonesonde profiles and a double monochromator Brewer instrument located at Goddard Space Flight Center. To date we have tested our intercomparisons algorithms using available Envisat data compared with SBW/2 and the ground based observations. We analyzed the comparisons with respect to ozone amounts and latitude and found the differences that were expected based on the initial release of Envisat data, which had known deficiencies. We will present our latest results based on the most current release of Envisat ozone data products.

Hilsenrath, E.↗

Laser Communications Relay Demonstration (LCRD) Update and the Path Towards Optical Relay Operations

This paper provides a concept for an evolution of NASA's optical communications near Earth relay architecture. NASA's Laser Communications Relay Demonstration (LCRD), a joint project between NASA's Goddard Space Flight Center (GSFC), the Jet Propulsion Laboratory - California Institute of Technology (JPL), and the Massachusetts Institute of Technology Lincoln Laboratory (MIT LL). LCRD will provide a minimum of two years of high data rate optical communications service experiments in geosynchronous orbit (GEO), following launch in 2019. This paper will provide an update of the LCRD mission status and planned capabilities and experiments, followed by a discussion of the path from LCRD to operational network capabilities.

Space Communications↗

Laser Communications Relay Demonstration (LCRD) Update and the Path Towards Optical Relay Operations

This Presentation provides a concept for an evolution of NASAs optical communications near Earth relay architecture. NASA's Laser Communications Relay Demonstration (LCRD), a joint project between NASAs Goddard Space Flight Center (GSFC), the Jet Propulsion Laboratory - California Institute of Technology (JPL), and the Massachusetts Institute of Technology Lincoln Laboratory (MIT LL). LCRD will provide a minimum of two years of high data rate optical communications service experiments in geosynchronous orbit (GEO), following launch in 2019. This paper will provide an update of the LCRD mission status and planned capabilities and experiments, followed by a discussion of the path from LCRD to operational network capabilities.

Space Communications↗

LCRD Update and Path to Optical Relay Operations

Speaker and Presenter at the Lincoln Laboratory Communications Workshop on May 23, 2017 at the Massachusetts Institute of Technology Lincoln Laboratory in Lexington, MA. This presentation discusses a concept for an evolution of NASAs optical communications near-Earth relay architecture. NASA's Laser Communications Relay Demonstration (LCRD) is a joint project between NASAs Goddard Space Flight Center (GSFC), the Jet Propulsion Laboratory California Institute of Technology (JPL), and the Massachusetts Institute of Technology Lincoln Laboratory (MIT LL). LCRD will provide a minimum of two years of high data rate optical communications service experiments in geosynchronous orbit (GEO) following launch in 2019. This presentation will provide an update of the LCRD mission status and planned capabilities and experiments, followed by a discussion of the path from LCRD to operational network capabilities.

Space Communications↗

Ultra-Fast Non-Volatile Resistive Switching Devices with Over 512 Distinct and Stable Levels for Memory and Neuromorphic Computing

Low-current multilevel programmability with inherent non-volatility and high stability of resistance states is required for both multi-bit memory storage and deep learning accelerators but is difficult to achieve. Here, in a resistive switching system, this work realizes >512 (>9 bits) distinct non-volatile conductance levels with stable retention for each state with current levels down to the nanoampere range, highly promising for potential integration with small processing nodes with ultra-low power consumption requirements. This is achieved by demonstrating a new thin film design concept that encompasses three key features: an ultra-thin epitaxial oxygen ionic switching layer that provides a tunable energy barrier at the bottom electrode, an overcoat amorphous layer that acts as an ion migration barrier for stable state retention, and a partial conductive filament as a localized electronic transport channel to the epitaxial switching layer. A large dynamic resistance range of up to seven orders of magnitude is achieved with reset-free transitions among intermediate states, and programmability is demonstrated with ultra-fast (20 ns) pulses. Artificial neural network (ANN) simulations, based on the experimental performance and its non-idealities, demonstrate close-to-ideal inference accuracies for various Modified National Institute of Standards and Technology (MNIST) data sets.

36 MATERIALS SCIENCE↗

Cataloging and indexing - The development of the Space Shuttle mission data base and catalogs from earth observations hand-held photography

All earth-looking photographs acquired by Space Shuttle astronauts are identified, located, and catalogued after each mission. The photographs have been entered into a computerized database at the NASA Johnson Space Center. The database in its two modes - computer and catalog - is organized and presented to provide a scope and level of detail designed to be useful in Earth science activities, resource management, environmental studies, and public affairs. The computerized database can be accessed free through standard communication networks 24 hours a day, and the catalogs are distributed throughout the world. Photograph viewing centers are available in the United States, and photographic copies can be obtained through government-supported centers.

Nelson, Raymond M.↗

Venturing into Unexplored Phase Space: Synthesis, Structure, and Properties of MgCo 3 B 2 Featuring a Rumpled Kagomé Network

MgCo 3 B 2 , a novel ternary boride in a previously unexplored phase space, was synthesized using the hydride route. In situ powder X-ray diffraction and DFT calculations aided in the discovery of this compound, whose structure was then determined by single-crystal X-ray diffraction. Like the closely related CeCo 3 B 2 , MgCo 3 B 2 crystallizes in centrosymmetric space group P6/mmm (a = 4.883(2) Å, c = 2.926(2) Å at 210 K, Z = 1). Unlike CeCo 3 B 2 , however, it adopts a disordered structure that features a rumpled Kagomé network of Co atoms, and Mg atoms fill the channels of a Co–B framework. Although the structural disorder leads to motifs that are similar to those observed in MgNi 3 B 2 and other related ternary borides, no evidence of an ordered superstructure was found by single-crystal X-ray diffraction or high-resolution powder X-ray diffraction. In the case of CeCo 3 B 2 , boron atoms occupy the center of regular Co 6 trigonal prisms; in MgCo 3 B 2 , boron atoms are shifted from the center of the prism to form B–B dimers with roughly the same length as those found in MgNi 3 B 2 . Magnetic susceptibility data exhibit an unusual temperature dependence that cannot be convincingly modeled by the modified Curie–Weiss equation, consistent with DFT calculations predicting a nonmagnetic ground state. Intrinsic susceptibility at 300 K is 1.42 × 10 –3 emu/mol Oe, which is comparable to that of paramagnetic YCo 3 B 2 and CeCo 3 B 2 with a similar structure and composition. Here, this study showcases the efficacy of combining several methodologies to discover new solids in unexplored phase spaces. This approach includes in situ PXRD data to monitor reactions of precursors upon heating, a diffusion-enhanced synthesis method, and DFT assessment of compound stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transport spatial model for the definition of green routes for city logistics centers

This paper presents a transport spatial decision support model (TSDSM) for carrying out the optimization of green routes for city logistics centers. The TSDSM model is based on the integration of the multi-criteria method of Weighted Linear Combination (WLC) and the modified Dijkstra algorithm within a geographic information system (GIS). The GIS is used for processing spatial data. The proposed model makes it possible to plan routes for green vehicles and maximize the positive effects on the environment, which can be seen in the reduction of harmful gas emissions and an increase in the air quality in highly populated areas. The scheduling of delivery vehicles is given as a problem of optimization in terms of the parameters of: the environment, health, use of space and logistics operating costs. Each of these input parameters was thoroughly examined and broken down in the GIS into criteria which further describe them. The model presented here takes into account the fact that logistics operators have a limited number of environmentally friendly (green) vehicles available. The TSDSM was tested on a network of roads with 127 links for the delivery of goods from the city logistics center to the user. The model supports any number of available environmentally friendly or environmentally unfriendly vehicles consistent with the size of the network and the transportation requirements. - Highlights: • Model for routing light delivery vehicles in urban areas. • Optimization of green routes for city logistics centers. • The proposed model maximizes the positive effects on the environment. • The model was tested on a real network.

54 ENVIRONMENTAL SCIENCES↗

Atomic and electronic structure of Pd{sub 40}Ni{sub 40}P{sub 20} bulk metallic glass from ab initio simulations

The atomic structure of Pd{sub 40}Ni{sub 40}P{sub 20} bulk metallic glass has been simulated using an ab initio molecular dynamics method with projector-augmented wave pseudopotentials for electron-ion interaction and generalized gradient approximation for exchange-correlation energy. The calculated extended x-ray absorption fine structure (EXAFS) spectra of Pd-K and Ni-K edges, the mass density, and the electronic structure agree remarkably well with the available experimental data and the EXAFS spectra measured at the SPring-8 synchrotron radiation facility. Our results show that the atomic structure can be described in terms of P-centered polyhedra. There are no two P atoms that are nearest neighbors at this composition, and this could be a reason for the observed optimal P concentration of about 20 at.%. The neighboring polyhedra share metal (M) atoms and form a polar covalently bonded random network of P-M-P favoring certain angles. The remaining M atoms act as metallic glue with a tendency of nanoscale clustering of Pd-Pd and Ni-Ni atoms.

36 MATERIALS SCIENCE↗

Fault-tolerant onboard digital information switching and routing for communications satellites

The NASA Lewis Research Center is developing an information-switching processor for future meshed very-small-aperture terminal (VSAT) communications satellites. The information-switching processor will switch and route baseband user data onboard the VSAT satellite to connect thousands of Earth terminals. Fault tolerance is a critical issue in developing information-switching processor circuitry that will provide and maintain reliable communications services. In parallel with the conceptual development of the meshed VSAT satellite network architecture, NASA designed and built a simple test bed for developing and demonstrating baseband switch architectures and fault-tolerance techniques. The meshed VSAT architecture and the switching demonstration test bed are described, and the initial switching architecture and the fault-tolerance techniques that were developed and tested are discussed.

Shalkhauser, Mary JO↗

PV-Diesel Hybrid SCADA Experiment Network Design

The essential features of an experimental network for renewable power system satellite based supervisory, control and data acquisition (SCADA) are communication links, controllers, diagnostic equipment and a hybrid power system. Required components for implementing the network consist of two satellite ground stations, to satellite modems, two 486 PCs, two telephone receivers, two telephone modems, two analog telephone lines, one digital telephone line, a hybrid-power system equipped with controller and a satellite spacecraft. In the technology verification experiment (TVE) conducted by Savannah State University and Florida Solar Energy Center, the renewable energy hybrid system is the Apex-1000 Mini-Hybrid which is equipped with NGC3188 for user interface and remote control and the NGC2010 for monitoring and basic control tasks. This power system is connected to a satellite modem via a smart interface, RS232. Commands are sent to the power system control unit through a control PC designed as PC1. PC1 is thus connected to a satellite model through RS232. A second PC, designated PC2, the diagnostic PC is connected to both satellite modems via separate analog telephone lines for checking modems'health. PC2 is also connected to PC1 via a telephone line. Due to the unavailability of a second ground station for the ACTS, one ground station is used to serve both the sending and receiving functions in this experiment. Signal is sent from the control PC to the Hybrid system at a frequency f(sub 1), different from f(sub 2), the signal from the hybrid system to the control PC. f(sub l) and f(sub 2) are sufficiently separated to avoid interference.

Kalu, Alex↗

Extending Grid Computing to Remote Locations

NASA Glenn Research Center, in cooperation with NASA Ames and geologists from the University of Cincinnati and Bowling Green State University has extended the computational capabilities of the information Power Grid to remote research sites. The combination of satellite (EOS) data acquisition and the IPG processing provides geologists with the ability to identify the key mineralogical features at the research site. The underlying connectivity for this research environment is provided by the Numerical Research and Education Network (NREN) using a combination of terrestrial and mobile satellite-based networking solutions. Our approach not only speeds the process of scientific discovery, but also serves as a simple demonstration of NASA's capacity for geological classification and exploration of remote sites such as the Martian surface. The NASA Glenn Demonstrations combines satellite (EOS) data acquisition and the computational capabilities or the Information Power Grid (IPG) to provide geologists with the ability to identify key mineralogical features in near real-time of an area in study. This capability could someday allow geological classification of rocks and minerals of remote sites such as the Martian surface.

Griffin, Robert↗

Incorporating Ameriflux Data into LVT

This paper describes a new generic data reader that was developed in Fortran to handle the Ameriflux data for the LIS Verification Toolkit (LVT). Researchers at the Hydrological Sciences Branch of NASA Goddard Space Flight Center have created a high resolution land surface modeling and data assimilation system known as the Land Information System (LIS), which provides an infrastructure to integrate state-of-the-art land surface models, data assimilation algorithms, observations of land surface from satellite and remotely sensed platforms to provide estimates of land surface conditions such as soil moisture, evaporation, snowpack and runoff. These model predictions are typically evaluated by comparing them with data from observational networks. The observational data; however, are usually available in disparate data formats and require significant effort to process them into a structure amenable for use with the model data. The motivation to develop a uniform approach for land surface verification as a way to alleviate these processing efforts has led to the development of LVT which is designed to enable the rapid evaluation of land surface modeling and analysis products from LIS. LVT focuses on the use of observational datasets in their native format. As the formats of these datasets vary widely, a major part of LVT is creating programs to read and process the native datasets. The primary goal of this project is to enhance LVT capabilities by incorporating observational datasets from Ameriflux

Georgiev, Teodor↗