Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Plotting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

SU-E-T-372: Evaluation and Comparison of Second-Check Monitor Unit Calculation Software with Pinnacle Treatment Planning System

Purpose: The purpose of this study was to evaluate and compare the accuracy of dose calculation algorithms in the second check software programs Radcalc, Diamond, IMSure, and MUcheck, against the Pinnacle3 treatment planning system (TPS). Methods: Baseline accuracy of the second check software was established by comparison against Pinnacle TPS data using open square fields of 5, 10, 20, 30 and 40cm in a SAD setup. 18 previously treated patients’ files were exported from the Pinnacle3 TPS to each of the four second check softwares, consisting of 146 step and shoot intensity modulated radiotherapy (IMRT) beams and 60 Smart Arcs. Monitor unit (MU) calculated in each of the software were compared with the TPS and the values were represented as a percent difference. Open fields were calculated as a baseline for each software’s accuracy using 5×5, 10×10, 20×20, 30×30, and 40×40 fields. Box plots, Pearson correlation, and Bland-Altman analysis were used for comparison of the results. Results: The baseline accuracy was established to within 0.6%, −1.4%, −0.2%, and −1.0% for Diamond, IMSure,MUcheck, and Radcalc, respectively. In the clinical data, the dose difference represented as mean ± 1 standard deviation were 0.7%±0.1%, −0.3%±0.1%, −1.5%±0.1%, and 0.4%±0.0% for Diamond, IMSure, MUcheck, and Radcalc, respectively Conclusion: The implementation of Clarkson algorithm for the dose calculation between each of the software in question can vary considerably. The currently used second check software, Radcalc has shown the best agreement on average, variance, and smallest percent range from Pinnacle3 TPS values. The closest in average percent difference from the TPS data was the IMSure software, but has significantly larger variance and percent range. The mean percent differences in Diamond and MUcheck were significantly larger than Radcalc and IMSure.

60 APPLIED LIFE SCIENCES↗

Soil C stock and CO2 production data for Soong et al. 2021: Effects of five years of soil warming at Blodgett Forest, CA.

Subsoils below 20 cm are an important reservoir in the global carbon cycle, but little is known about their vulnerability under climate change. We measured subsoil carbon in warmed vs control plots of a conifer forest after 4.5 years of whole-soil warming (4°C). We also measured soil CO2 efflux at the surface and soil CO2 concentrations along the soil profile. Over the 4.5 years we observed that warming resulted in a loss of subsoil carbon stocks (−33 ± 11%), primarily from unprotected particulate organic matter. Warming also stimulated a sustained 30 ± 4% increase in soil CO2 efflux due to increased CO2 production through the whole-soil profile. The observed in situ decline in subsoil carbon stocks with warming is now definitive evidence of a positive soil carbon-climate feedback, which could not be concluded based on increases in CO2 effluxes alone. This dataset comprises (1) 13C and C recovery in 2014, 2016, and 2018 1m soil cores sampled in 10cm increments. (2) Monthly surface CO2 fluxes from 2014 to 2018. (3) Monthly gas well sample [CO2] and production data. And (4) density fraction data for three depths of cores recovered in 2017.

54 ENVIRONMENTAL SCIENCES↗

Correlations between jet-quenching observables at energies available at the BNL Relativistic Heavy Ion Collider

Focusing on four types of correlation plots, R{sub AA} versus v{sub 2}, R{sub AA} versus I{sub AA}, I{sub AA} versus v{sub 2}{sup I{sub AA}}, and v{sub 2} versus v{sub 2}{sup I{sub AA}}, we demonstrate how the centrality dependence of correlations between multiple jet quenching observables provide valuable insight into the energy loss mechanism in a quark-gluon plasma. In particular, we find that a qualitative energy loss model gives a good description of R{sub AA} versus v{sub 2} only when we take {Delta}E-I{sup 3} and a medium geometry generated by a model of the color glass condensate. This same {Delta}E-I{sup 3} model also qualitatively describes the trigger p{sub T} dependence of R{sub AA} versus I{sub AA} data and makes novel predictions for the centrality dependence for this R{sub AA} versus I{sub AA} correlation. Current data suggest, albeit with extremely large uncertainty, that v{sub 2}{sup I{sub AA}} >> v{sub 2}, a correlation that is difficult to reproduce in current energy loss models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fracture strength and elastic modulus as a function of porosity for hydroxyapatite and other brittle materials Part I

Porous brittle materials are used as filters, catalyst supports, solid oxide fuel cells and biomedical materials. However the literature on the Weibull modulus, m, versus volume fraction porosity, P, is extremely limited despite the importance of m as a gauge of mechanical reliability. In Part I of this study, m is determined for 441 sintered hydroxyapatite (HA) specimens fractured in biaxial flexure for 0.08 P 0.62. In this study, we analyze a combined data set collected from the literature that represents work from a total of 17 different research groups (including the present authors), eight different materials and more than 1560 oxide and non-oxide specimens, the m versus P plot is Ushaped with a wide band of m values for P < 0.1 (Region I) and P > 0.55 (Region III), and a narrower band of m values in the intermediate porosity region of 0.1 < P < 0.55 (Region II). The limited range of m ( 4 < m < 11) in Region II has important implications since Region II includes the P range for the majority of the applications of porous brittle materials. Part II of this study focuses on the P dependence of the mean fracture strength,< f >, and the Young s modulus E for the HA specimens tested in Part I along with literature data for other brittle materials. Both < f > and E are power law functions of the degree of densification, , where = 1 P/PG and PG is the green (unfired) porosity.

30 DIRECT ENERGY CONVERSION↗

Marine Corps Base Camp Lejeune Air Emission Factors Data

Critical military training and testing on lands along the nation’s coastal and estuarine shorelines are increasingly placed at risk because of development pressures in surrounding areas, impairments due to other anthropogenic disturbances, and increasing requirements for compliance with environmental regulations. The U.S. Department of Defense (DoD) intends to enhance and sustain its training and testing assets and to optimize its stewardship of natural resources through the development and application of an ecosystem-based management approach on DoD installations. To accomplish this goal, particularly for installations in estuarine/coastal environments, the Strategic Environmental Research and Development Program (SERDP) launched the Defense Coastal/Estuarine Research Program (DCERP) as a minimum 10-year effort at Marine Corps Base Camp Lejeune (MCBCL) in North Carolina. The results of the first six years of the program (DCERP1) are presented here.The overarching objectives of DCERP are to: (1) understand the effects of military training activities, infrastructure development, and other coastal military installations; (2) develop models, tools, and indicators to evaluate ecosystem health; and (3) recommend adaptive management strategies to sustain ecosystem natural resources within the context of an active military installation.Spreadsheet file with two sheets, one with excess mixing ratios and concentrations of gaseous and particulate (PM2.5) pollutant species measured in prescribed burning (PB) plumes, the other with the emission factors (EF) calculated from the former assuming that a) the fuel-carbon content by mass is 42.6 % and b) all fuel-C species produced and emitted during PB had been captured by our measurements. PB experiments were conducted in five different test plots (RB, HA, MF, IEn, IEs), spanning the moisture gradient from semi-mesic loblolly pine forest to wet-mesic loblolly-longleaf pine forest to pond pine pocosin. Each plot contained mechanically treated, hydro-axed fuel in a 100 x 100 m (1 ha) area, whose emissions were compared to those from the surrounding untreated control fuel. The majority of these data were added to MARDIS, but the entire file is provided here for ease of use.

54 ENVIRONMENTAL SCIENCES↗

In-situ irradiation-induced studies of grain growth kinetics of nanocrystalline UO 2

The thermal conductivity of UO 2 fuel needs to be high enough to dissipate the heat generated from the fission reaction. Since grain size affects thermal conductivity and grain size can evolve with irradiation, it is critical to understand in-reactor UO 2 grain growth. Most studies of grain growth in UO 2 are based on thermally driven processes at elevated temperatures. However, studies have shown that grain growth can occur even at cryogenic temperatures by ballistic processes. Such irradiation-induced grain growth in UO 2 is yet to be studied. Advanced in-situ Kr ion irradiation and transmission electron microscopy were systematically performed on nanocrystalline UO 2 thin films at temperatures ranging from 50 K to 1073 K; grain growth was observed at all temperatures. A combination of manual and machine learning techniques was used to measure and plot grain size evolution against irradiation fluence at various irradiation temperatures. The machine learning method has significantly improved the analysis efficiency and reduced human labors. The grain diameter data were fitted using classical grain growth and thermal spike models to describe grain growth kinetics with and without irradiation effect. Grain growth during low temperature irradiation (≤ 475 K) can be well described by the thermal spike model. Above 475 K, there were additional thermally assisted processes that further accelerate the grain growth. At the highest irradiation temperature about 1075 K, both irradiation-induced dislocation loops and cavities/bubbles were observed to form in the UO 2 . In this report, the effects of irradiation-induced defects on grain growth kinetics are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Trivalent f-Element Squarates, Squarate-Oxalates, and Cationic Materials, and the Determination of the Nine-Coordinate Ionic Radius of Cf(III)

The synthesis, structure, and solid-state UV–vis–NIR spectroscopy of four new f-element squarates, M 2 (C 4 O 4 ) 3 (H 2 O) 4 (M = Eu, Am, Cf) and Sm(C 4 O 4 )(C 4 O 3 OH)(H 2 O) 2 ·0.5H 2 O, four new cationic lanthanide squarate chlorides, [M 4 (C 4 O 4 ) 5 (H 2 O) 12 ]Cl 2 ·5H 2 O (M = Eu, Dy, Ho Er), and two new actinide squarate oxalates, M 2 (C 4 O 4 ) 2 (C 2 O 4 )(H 2 O) 4 (M = Am, Cf), are presented. All of the metal centers are trivalent. Single-crystal X-ray diffraction analysis reveals that M 2 (C 4 O 4 ) 3 (H 2 O) 4 and Sm(C 4 O 4 )(C 4 O 3 OH)(H 2 O) 2 ·0.5H 2 O have a two-dimensional sheet structure constructed from MO 7 (H 2 O) 2 monocapped square-antiprismatic (coordination number (CN) = 9) metal centers and SmO 6 (H 2 O) 2 square-antiprismatic (CN = 8) metal centers, respectively, whereas M 2 (C 4 O 4 ) 2 (C 2 O 4 )(H 2 O) 4 have a three-dimensional (3D) structure constructed from MO 7 (H 2 O) 2 monocapped square-antiprismatic (CN = 9) metal centers. Additionally, the cationic framework materials [M 4 (C 4 O 4 ) 5 (H 2 O) 12 ]Cl 2 ·5H 2 O have a 3D structure constructed from two crystallographically unique MO 5 (H 2 O) 3 square-antiprismatic (CN = 8) metal centers. In these structures, the squarate ligands bind to the metal centers with varying coordination modes and denticities. The results of this study provide another example of the nonparallel chemistry between the lanthanides and transplutonium elements. From the crystallographic data for the isotypic series M 2 (C 4 O 4 ) 3 (H 2 O) 4 (M = La–Nd, Sm, Eu) and the linear regression fit to a plot of the unit cell volume as a function of the cube of the ionic radius, the nine-coordinate ionic radius of Cf 3+ was determined to be 1.127 ± 0.003 Å. Lastly, computational analysis of the americium and californium complexes M 2 (C 4 O 4 ) 3 (H 2 O) 4 and M 2 (C 4 O 4 ) 2 (C 2 O 4 )(H 2 O) 4 reveals three important attributes: (i) the 5f orbitals are nonbonding in all cases, with the bonding differences occurring with the empty 6d orbitals; (ii) the Cf complexes exhibit more covalent character than their Am counterparts; and (iii) there is more covalent character in the squarate-oxalate complexes than in the squarate complexes.

Crystallography↗

Stability of Pt Skin Intermetallic Core Catalysts and Adsorption Properties for the Oxygen Reduction Reaction

Density functional theory calculations were used to determine the stability of metal slabs consisting of a Pt surface monolayer and intermetallic supporting layers made from combinations of six transition metal elements (Pt, Fe, Co, Ni, Cu, and Ag), as a model system for Pt skin intermetallic core nanoparticle catalysts. The stability of the slabs is largely determined by strain at the interface of the Pt skin and the subsurface intermetallic, which was described by a lattice matching parameter (r). The surface charge on the Pt skin was found to be correlated with the average electronegativity (EN) of the intermetallic core, so this average EN was used as a descriptor for how the electronic coupling (or ligand effect) affects adsorption energies. A total of 46 slabs were investigated in terms of their stability, from which 10 stable slabs were selected for further studies of adsorbate binding (OOH*, O*, and OH*) that are intermediates in the oxygen reduction reaction (ORR). The correlation between all three adsorption energies and descriptors r and EN was found. Using a linear fit between our descriptors and the calculated adsorption energies, the overpotential for the ORR was obtained as a function of r and EN, from which a volcano plot was produced. The volcano peak was found at r = 0.96 or at EN = 2.025. Interestingly, neither r nor EN was a sufficient single reactivity descriptor as the data points were well off the general trend in both linear fits; this implies that both the strain effect and the ligand effect influence the adsorption energies, although they are partly correlated. The (r, EN) target peak parameters were used to screen over 241 intermetallic combinations of transition metal elements as active ORR activity. In conclusion, this analysis identified 11 intermetallic compounds which can support a Pt skin to have a high predicted ORR activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-resolution sub-Doppler infrared spectroscopy of atmospherically relevant Criegee precursor CH 2 I radicals: CH 2 stretch vibrations and “charge-sloshing” dynamics

The combination of a pulsed supersonic slit-discharge source and single-mode difference frequency direct absorption infrared spectroscopy permit first high resolution infrared study of the iodomethyl (CH 2 I) radical, with the CH 2 I radical species generated in a slit jet Ne/He discharge and cooled to 16 K in the supersonic expansion. Dual laser beam detection and collisional collimation in the slit expansion yield sub-Doppler linewidths (60 MHz), an absolute frequency calibration of 13 MHz, and absorbance sensitivities within a factor of two of the shot-noise limit. Fully rovibrationally resolved direct absorption spectra of the CH 2 symmetric stretch mode (ν 2 ) are obtained and fitted to a Watson asymmetric top Hamiltonian with electron spin-rotation coupling, providing precision rotational constants and spin-rotation tensor elements for the vibrationally excited state. Assessment of the asymmetric top rotational constants confirms a vibrationally averaged planar geometry in both the ground- and first-excited vibrational levels. Sub-Doppler resolution permits additional nuclear spin hyperfine structures to be observed, with splittings in excellent agreement with microwave measurements on the ground state. Spectroscopic data on CH 2 I facilitate systematic comparison with previous studies of halogen-substituted methyl radicals, with the periodic trends strongly correlated with the electronegativity of the halogen atom. Surprisingly, we do not observe any asymmetric CH 2 stretch transitions, despite S/N ≈ 25:1 on strongest lines in the corresponding symmetric CH 2 stretch manifold. This dramatic reversal of the more typical 3:1 antisymmetric/symmetric CH 2 stretch intensity ratio signals a vibrational transition moment poorly described by simple “bond-dipole” models. Instead, the data suggest that this anomalous intensity ratio arises from “charge sloshing” dynamics in the highly polar carbon-iodine bond, as supported by ab initio electron differential density plots and indeed consistent with observations in other halomethyl radicals and protonated cluster ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulating single-particle dynamics in magnetized plasmas: The RMF code

The RMF (Rotating Magnetic Field) code is designed to calculate the motion of a charged particle in a given electromagnetic field. It integrates Hamilton’s equations in cylindrical coordinates using an adaptive predictor-corrector double-precision variable-coefficient ordinary differential equation solver for speed and accuracy. RMF has multiple capabilities for the field. Particle motion is initialized by specifying the position and velocity vectors. Here, the six-dimensional state vector and derived quantities are saved as functions of time. A post-processing graphics code, XDRAW, is used on the stored output to plot up to 12 windows of any two quantities using different colors to denote successive time intervals. Multiple cases of RMF may be run in parallel and perform data mining on the results. Recent features are a synthetic diagnostic for simulating the observations of charge-exchange-neutral energy distributions and RF grids to explore a Fermi acceleration parallel to static magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of e{sup +}e{sup -}{yields}K{sup +}K{sup -}{eta}, K{sup +}K{sup -}{pi}{sup 0}, and K{sub s}{sup 0}K{sup {+-}}{pi}{sup {+-}} cross sections using initial state radiation events

This paper reports measurements of processes: e{sup +}e{sup -}{yields}{gamma}K{sub S}{sup 0}K{sup {+-}}{pi}{sup {+-}}, e{sup +}e{sup -}{yields}{gamma}K{sup +}K{sup -}{pi}{sup 0}, e{sup +}e{sup -}{yields}{gamma}{phi}{eta}, and e{sup +}e{sup -}{yields}{gamma}{phi}{pi}{sup 0}. The initial-state radiated photon allows to cover the hadronic final state in the energy range from thresholds up to {approx_equal}4.6 GeV. The overall size of the data sample analyzed is 232 fb{sup -1}, collected by the BABAR detector running at the PEP-II e{sup +}e{sup -} storage ring. From the Dalitz plot analysis of the K{sub S}{sup 0}K{sup {+-}}{pi}{sup {+-}} final state, moduli, and relative phase of the isoscalar and the isovector components of the e{sup +}e{sup -}{yields}KK*(892) cross section are determined. Parameters of {phi} and {rho} recurrences are also measured, using a global fitting procedure which exploits the interconnection among amplitudes, moduli, and phases of the e{sup +}e{sup -}{yields}K{sub S}{sup 0}K{sup {+-}}{pi}{sup {+-}}, K{sup +}K{sup -}{pi}{sup 0}, {phi}{eta} final states. The cross section for the OZI-forbidden process e{sup +}e{sup -}{yields}{phi}{pi}{sup 0}, and the J/{psi} branching fractions to KK*(892) and K{sup +}K{sup -}{eta} are also measured.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Critical Shear Stress for Erosion Under Laminar Jet Flow

Particle erosion is an important process in both natural and manmade environments. For example, in natural environments particle or sediment erosion rates determine the course of rivers, depth of streams, and fate of deltas. The interplay between erosion rates and flow patterns can have dramatic impact on shorelines. Where hydrodynamic jet flows or rip currents change direction, sediments may accumulate or disperse altering the shape of coastlines and the ecosystems and economies that rely on them. In man-made systems, jet flows may be used to mobilize particles from surfaces or within industrial scale mixing tanks. For example, in the nuclear industry, impinging jet mixers may be used to mobilize and suspend sludges at the bottom of waste tanks. In each of these examples, the Shields diagram is useful to determine the conditions under which erosion occurs. This diagram plots the scaled critical shear stress for erosion as a function of the particle size as embedded in particle Reynolds numbers, Archimedes numbers, or their equivalents. Although the data, that carries a large spread, is largely in agreement with mathematical models, for the smallest particles, model predictions diverge from each other and from experimental data. Indeed, there is substantial uncertainty about the Shields diagrams at relatively small particle sizes and flow rates. Here we evaluate critical shear stresses for erosion under laminar jet flow. To date critical shear stresses for erosion, as embodied in Shields diagrams, have largely been developed for turbulent flow both experimental and mathematically. However, curves on the Shields diagrams diverge among various models at lower particle Reynolds numbers. Indeed, how critical shear stresses for erosion develop under fully laminar jet flow conditions (not simply laminar boundary layers under turbulent flow) remains unclear. Here we address this gap, which is particularly important for mobilization of the smallest particles. We find the Shields parameter to be inversely proportional to the particle Reynolds numbers under laminar jet flow conditions similar to turbulent conditions.

critical shear stresses, erosion rates, effective ↗

Simulation of Distributed PV Power Output in Oahu Hawaii

Distributed solar photovoltaic (PV) power generation in Oahu has grown rapidly since 2008. For applications such as determining the value of energy storage, it is important to have PV power output timeseries. Since these timeseries of not typically measured, here we produce simulated distributed PV power output for Oahu. Simulated power output is based on (a) satellite-derived solar irradiance, (b) PV permit data by neighborhood, and (c) population data by census block. Permit and population data was used to model locations of distributed PV, and irradiance data was then used to simulate power output. PV power output simulations are presented by sub-neighborhood polygons, neighborhoods, and for the whole island of Oahu. Summary plots of annual PV energy and a sample week timeseries of power output are shown, and a the files containing the entire timeseries are described.

14 SOLAR ENERGY↗

SPRUCE Production and Chemistry of Newly-Grown Fine Roots Assessed Using Root Ingrowth Cores in SPRUCE Experimental Plots beginning in 2014

This dataset reports growth and chemistry of newly-grown fine roots from root ingrowth cores in the SPRUCE experimental enclosures. There is one comma separated file (.csv) that provides fine-root growth and chemistry data for the ten SPRUCE experimental enclosures from years 2014 to 2017. These data were used to assess the warming and elevated CO2 response of fine roots and also capture responses across microtopographical features and plant types. The experimental work was conducted in a Picea mariana [black spruce] – Sphagnum spp. bog forest in northern Minnesota, 40 km north of Grand Rapids, in the USDA Forest Service Marcell Experimental Forest (MEF).

54 ENVIRONMENTAL SCIENCES↗

SPRUCE S1 Bog Vegetation Survey and Peat Depth Data: 2009

This data set reports the results of a field survey of the S1 Bog to characterize the vegetation and to determine peat depth. The survey was conducted on September 21 and 22, 2009. This initial survey of vegetation and peat depth characteristics of the target bog was conducted to evaluate the logical locations for installing replicated experimental blocks for SPRUCE. The goal was to identify multiple locations of uniform aboveground vegetation and belowground peat depth for positioning experimental units within the bog. The experimental work was conducted in a Picea mariana [black spruce] - Sphagnum spp. bog forest in northern Minnesota, 40 km north of Grand Rapids, in the USDA Forest Service Marcell Experimental Forest (MEF). There is one (*.csv) data file containing the vegetation survey data and observations, and the peat depth measurements. Also included are figures of the spatial distributions of vegetation survey and peat depth results (Vegetation_survey_2009_figures.pdf). Photos of the surveyed plots are included in several *.zip files.photos.

54 ENVIRONMENTAL SCIENCES↗

Steep Decay Phase Shaped by the Curvature Effect. I. Flux Evolution

The curvature effect may be responsible for the steep decay phase observed in gamma-ray bursts. To test the curvature effect with observations, the zero time point t {sub 0} adopted to plot the observer time and flux on a logarithmic scale should be appropriately selected. In practice, however, the true t {sub 0} cannot be directly constrained from the data. Thus, we move t {sub 0} to a certain time in the steep decay phase, which can be easily identified. In this situation, we derive an analytical formula to describe the flux evolution of the steep decay phase. The analytical formula reads as F{sub ν}∝(1+ t-tilde {sub obs}/ t-tilde {sub c}){sup −α}, with α( t-tilde {sub obs})=2+∫{sub 0}{sup log(1+ t-tilde {sub o}{sub b}{sub s}/ t-tilde {sub c})} β(τ)d[log(1+τ/ t-tilde {sub c})]/log(1+ t-tilde {sub obs}/ t-tilde {sub c}), where F {sub ν} is the flux observed at frequency ν, t-tilde {sub obs} is the observer time by setting t {sub 0} at a certain time in the steep decay phase, β is the spectral index estimated around ν, and t-tilde {sub c} is the decay timescale of the phase with t-tilde {sub obs}⩾0. We test the analytical formula with the data from numerical calculations. It is found that the analytical formula presents a good estimate of the evolution of the flux shaped by the curvature effect. Our analytical formula can be used to confront the curvature effect with observations and estimate the decay timescale of the steep decay phase.

79 ASTRONOMY AND ASTROPHYSICS↗

Fibrous filter efficiency and pressure drop in the viscous-inertial transition flow regime.

Fibrous filter pressure drop and aerosol collection efficiency were measured at low air pressures (0.2 to 0.8 atm) and high face velocities (5 to 20 meters per second) to give fiber Reynolds numbers in the viscous-inertial transition flow regime (1 to 16). In this regime, contemporary filtration theory based on Kuwabara's viscous flow through an ensemble of fibers under-predicts single fiber impaction by several orders of magnitude. Streamline curvature increases substantially as inertial forces become dominant. Dimensionless pressure drop measurements followed the viscous-inertial theory of Robinson and Franklin rather than Darcy's linear pressure-velocity relationship (1972). Sodium chloride and iron nano-agglomerate test aerosols were used to evaluate the effects of particle density and shape factor. Total filter efficiency collapsed when plotted against the particle Stokes and fiber Reynolds numbers. Efficiencies were then fitted with an impactor type equation where the cutpoint Stokes number and a steepness parameter described data well in the sharply increasing portion of the curve (20% to 80% efficiency). The cutpoint Stokes number was a linearly decreasing function of fiber Reynolds number. Single fiber efficiencies were calculated from total filter efficiencies and compared to contemporary viscous flow impaction theory (Stechkina et al. 1969), and numerical simulations from the literature. Existing theories under-predicted measured single fiber efficiencies although the assumption of uniform flow conditions for each successive layer of fibers is questionable; the common exponential relationship between single fiber efficiency and total filter efficiency may not be appropriate in this regime.

54 ENVIRONMENTAL SCIENCES↗

Measurements of e+e- to KKeta, KKpi0 and KsKpi CrossSections Using Initial State Radiation Events

This paper reports measurements of processes: e{sup +}e{sup -} {yields} {gamma}K{sup 0}{sub s}K{sup {+-}}{pi}{sup {+-}}, e{sup +}e{sup -} {yields} {gamma}K{sup +}K{sup -}{pi}{sup 0}, e{sup +}e{sup -} {yields} {gamma}{phi}{eta} and e{sup +}e{sup -} {yields} {gamma}{phi}{pi}{sup 0}. The initial state radiated photon allows to cover the hadronic final state in the energy range from thresholds up to {approx} 4.6 GeV. The overall size of the data sample analyzed is 232 fb{sup -1}, collected by the BABAR detector running at the PEP-II e{sup +}e{sup -} storage ring. From the Dalitz plot analysis of the K{sup 0}{sub s}K{sup {+-}}{pi}{sup {+-}} final state, moduli and relative phase of the isoscalar and the isovector components of the e{sup +}e{sup -} {yields} KK*(892) cross section are determined. Parameters of {phi} and {rho} recurrences are also measured, using a global fitting procedure which exploits the interconnection among amplitudes, moduli and phases of the e{sup +}e{sup -} {yields}K{sup 0}{sub s}K{sup {+-}}{pi}{sup {+-}}, K{sup +}K{sup -}{pi}{sup 0}, {phi}{eta} final states. The cross section for the OZI-forbidden process e{sup +}e{sup -} {yields} {phi}{pi}{sup 0} and the J/{psi} branching fractions to KK*(892) and K{sup +}K{sup -}{eta} are also measured.

43 PARTICLE ACCELERATORS↗