Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Orbital Communications Adapter

What is OCA? The OCA system provides the capability to transfer data (documents, imagery, video, data) between a ground PC network in MCC-H and the onboard SSC and JSL systems via Ku band.

Michelle Lee Nowling↗

Advances in PSP Testing in LaRC High Reynolds Number Facilities

The use of luminescent coatings for the global measurement of surface aerodynamic properties at full-flight Reynolds numbers has been ongoing at the NASA Langley Research Center since the late 1990s, beginning with Temperature Sensitive Paint (TSP) for boundary layer analysis at the 0.3-m Transonic Cryogenics Tunnel. Since then, significant work has been made to extend these measurements to pressure using Pressure Sensitive Paint (PSP) as well as develop systems for application in larger scale, full-flight Reynolds number facilities, such as the National Transonic Facility (NTF). Recently, a system for the measurement of time-resolved pressure using recently developed unsteady PSP (uPSP) formulations has been designed and implemented in the Transonic Dynamics Tunnel (TDT). The use of PSP (or uPSP) in either of these large scale, full-fight Reynolds number wind tunnels is complicated by the fact that both facilities operate best in oxygen deficient environments; however, the PSP technique relies on the presence of oxygen to work. The NTF is typically operated in cryogenic conditions, which is achieved using liquid nitrogen. In this facility, temperatures can reach as low as 116 K (-250 °F) with nominal oxygen concentrations of less than 50 ppm. This has resulted in the development of specialized PSP formulations that can operate in the cryogenic environment with the introduction of low amounts of oxygen (typically less than 2000 ppm) for PSP response. Likewise, to achieve full-flight Reynolds number conditions in the TDT, the atmosphere in the tunnel is replaced with a “heavy gas” of R-134A (1,1,1,2-tetrafluoroethane), which also has minimal oxygen native in the flow. The use of uPSP in this case will also depend on the introduction of trace amounts of oxygen, with the precise concentrations to be determined in an upcoming test. This presentation will describe some recent advancements that have been made for PSP measurements in both facilities. For the NTF system, there has been significant development of enhanced lighting for use at cryogenic conditions, as well as improvements in the application efficiency of the PSP. Furthermore, there are efforts underway to incorporate advanced data analysis techniques to acquire additional surface aerodynamic properties using the PSP technique that can yield not only improved experimental efficiency, but also provide data needed for next generation vehicle design and development. For the uPSP system in TDT, significant efforts to improve the data transfer rates to a high-performance computing environment for analysis are underway and performance and initial results from the system in the heavy-gas environment will be presented.

Pressure Sensitive Paint↗

Development of a Computational Framework for the Design of Resilient Space Structures

Cyber-physical testing provides a unique platform to enable the design of resilient space structures. This hybrid approach requires the development of a structural model that accounts for various hazards (e.g., micrometeorite and debris impact) and interacts with physical tests and other sub-system models (e.g., thermal) of the space habitat. A two-dimensional finite element analysis code was developed in MATLAB to facilitate the evaluation of potential designs under operating and unexpected loads and prepare the computational framework for eventually performing cyber-physical testing. The code’s efficiency was enhanced by using an object-oriented programming approach that reduced data transfer between functions. In this study, the code is implemented to predict the response of a dome-style structure made of regolith concrete to impact loading and identify the force magnitude that will cause the tensile strength to be exceeded in domes with different thicknesses.

Tensile strength↗

Gateway Autonomy for Enabling Deep Space Exploration

The Gateway spacecraft is an important stepping-stone to exploration of the solar system, integrating commercial and international partners into a tightly coupled system, enabling cislunar activities, and implementing key technologies for missions to Mars. Autonomy is a capability area necessary to handle long communication outages where intervention from Earth is impossible, to prepare to operate with long communication delays that will be common in interplanetary travel, and to make spaceflight more affordable and accessible by reducing sustaining operations costs. The Gateway Concept of Operations states that one of Gateway’s goals is to “focus on infrastructure and systems that will allow autonomous operations aboard the Gateway with robotics, automated systems, advanced communications, and distributed computing.” Gateway’s Vehicle Systems Manager (VSM) and associated Autonomous Spacecraft Management Architecture (ASMA) are key products towards delivering autonomous capability. The primary functions of the control architecture are Mission Management and Timeline Execution, Resource Management, Fault Management, and Vehicle Control and Operation (VCO). In each of these areas, there is an initial level of capability to be delivered at launch, with plans to continue development and grow to greater capability. The initial deployment of VSM will focus on maintaining vehicle safety by focusing on full fault management capabilities and deploying only enough resource and timeline planning functionality to support that. The final deployment of VSM will add significant planning and control optimization functionality to support nominal operations for up to 21 days without ground support, even accommodating fault and failure conditions. While the VSM is the vehicle-level representation of autonomous reasoning, distributed automation is essential to provide the right scope and abstraction of information to process. Module and system support of automation and simplicity of interfaces are two important design paradigms that Gateway is focusing on to garner a systems approach to autonomy. Distribution of reasoning can increase complexity, so Gateway is also taking a strict hierarchical approach to information flow and decision making. VSM is not the only capability necessary to achieve an autonomous spacecraft. Robotics support for maintenance of the spacecraft will be essential to provide continued vehicle functionality even when crew is not present. Technical and programmatic challenges exist when implementing autonomous robotics operations. These challenges include sufficient network flexibility to support data transfer to the rest of the vehicle to coordinate module-to-module robotic walk-offs and finding the proper interfaces to allow sufficient dexterity. Communication system upgrades planned for Gateway include Delay Tolerant Networking to best utilize the complex network of relays that will be part of mature cislunar operations. Distributed computing and management will provide failure tolerance, robustness, and growth of capabilities while still allowing significant reuse of heritage software on heritage systems as well as reuse of common applications across a spacecraft to minimize new development, but this requires adherence to key standards and interfaces. The Gateway program has demonstrated significant progress towards these capabilities and has identified challenges other spacecraft developers should be aware of from the start.

Molly Anderson↗

SOLL-E: A Module Transport and Placement Robot for Autonomous Assembly of Discrete Lattice Structures

This paper presents the design and development of a transport and placement robot that demonstrates autonomous assembly of structural building blocks. The robots are intended to serve as a critical component of automated structural assembly and maintenance systems. The Scaling Omni-directional Lattice Locomoting Explorer (SOLL-E) uses a 5-DoF bipedal inchworm locomotion architecture with locking foot and cargo grippers. The locomotion system employs large magnet gap diameter BLDC motors with moderate timing belt gearing for primary joints, and DC planetary gearmotors for turning. Foot and cargo grippers are identical, with servo-actuated locking mechanisms. Three modular controller boards are used to control these actuators in real-time, with command and telemetry data transferred between the server and each controller board via WiFi. Functionality and performance were evaluated in a ground demonstration.

robotics↗

Gateway Autonomy for Enabling Deep Space Exploration

The Gateway spacecraft is an important stepping-stone to exploration of the solar system, integrating commercial and international partners into a tightly coupled system, enabling cislunar activities, and implementing key technologies for missions to Mars. Autonomy is a capability area necessary to handle long communication outages where intervention from Earth is impossible, to prepare to operate with long communication delays that will be common in interplanetary travel, and to make spaceflight more affordable and accessible by reducing sustaining operations costs. The Gateway Concept of Operations states that one of Gateway’s goals is to “focus on infrastructure and systems that will allow autonomous operations aboard the Gateway with robotics, automated systems, advanced communications, and distributed computing.” Gateway’s Vehicle Systems Manager (VSM) and associated Autonomous Spacecraft Management Architecture (ASMA) are key products towards delivering autonomous capability. The primary functions of the control architecture are Mission Management and Timeline Execution, Resource Management, Fault Management, and Vehicle Control and Operation (VCO). In each of these areas, there is an initial level of capability to be delivered at launch, with plans to continue development and grow to greater capability. The initial deployment of VSM will focus on maintaining vehicle safety by focusing on full fault management capabilities and deploying only enough resource and timeline planning functionality to support that. The final deployment of VSM will add significant planning and control optimization functionality to support nominal operations for up to 21 days without ground support, even accommodating fault and failure conditions. While the VSM is the vehicle-level representation of autonomous reasoning, distributed automation is essential to provide the right scope and abstraction of information to process. Module and system support of automation and simplicity of interfaces are two important design paradigms that Gateway is focusing on to garner a systems approach to autonomy. Distribution of reasoning can increase complexity, so Gateway is also taking a strict hierarchical approach to information flow and decision making. VSM is not the only capability necessary to achieve an autonomous spacecraft. Robotics support for maintenance of the spacecraft will be essential to provide continued vehicle functionality even when crew is not present. Technical and programmatic challenges exist when implementing autonomous robotics operations. These challenges include sufficient network flexibility to support data transfer to the rest of the vehicle to coordinate module-to-module robotic walk-offs and finding the proper interfaces to allow sufficient dexterity. Communication system upgrades planned for Gateway include Delay Tolerant Networking to best utilize the complex network of relays that will be part of mature cislunar operations. Distributed computing and management will provide failure tolerance, robustness, and growth of capabilities while still allowing significant reuse of heritage software on heritage systems as well as reuse of common applications across a spacecraft to minimize new development, but this requires adherence to key standards and interfaces. The Gateway program has demonstrated significant progress towards these capabilities and has identified challenges other spacecraft developers should be aware of from the start.

Molly Anderson↗

Insights and Observations From Operating A Laser Communication Terminal on the International Space Station (ISS)

The Integrated Laser Communication Relay Demonstration (LCRD) Low Earth Orbit User Modem and Amplifier Terminal (ILLUMA-T) is the first user platform for NASA’s first laser communication relay, LCRD. ILLUMA-T is hosted on the International Space Station (ISS) as an external payload of the Japanese Experiment Module – Exposed Facility (JEM-EF) situated in slot 3. The LCRD payload is hosted on the STPSat-6 spacecraft, which orbits Earth in a geostationary orbit at position 112 W. The ILLUMA-T-to-LCRD system provides a bidirectional, space-to-ground laser communication relay link transferring data up to 1.2 Gbps utilizing two optical ground stations (OGS), OGS-1 in California and OGS-2 in Hawai’i. This paper describes lessons learned from operating the ILLUMA-T system and examines topics such as the end-to-end system availability, predictive versus actual ephemeris, acquisition adjustments, modem timing and handshaking, the terminal’s physical placement and accommodations, and experiment development, execution, and analysis. The authors of this paper operate both the LCRD and ILLUMA-T laser terminals on a daily basis including pass planning, procedure execution, acquisition analysis, and real-time terminal commanding and telemetry monitoring. LCRD is a joint project involving NASA Goddard Space Flight Center (GSFC), the California Institute of Technology Jet Propulsion Laboratory (JPL), and Massachusetts Institute of Technology Lincoln Laboratory (MIT LL). The ILLUMA-T payload is managed by NASA GSFC in Greenbelt, Maryland whose partners include the ISS program office at NASA’s Johnson Space Center (JSC) in Houston, Texas; the Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) in Huntsville, Alabama; the Glenn Research Center (GRC) in Cleveland, Ohio; and the MIT LL in Lexington, Massachusetts. ILLUMA-T is funded by the Space Communications and Navigation (SCaN) Program at NASA Headquarters in Washington, D.C.

Laser Communications↗

Big Data Challenges at CCMC

Like other research centers, the Community Coordinated Modeling Center (CCMC, https://ccmc.gsfc.nasa.gov) at NASA Goddard Space Flight Center (GSFC) is also experiencing the big data challenges. CCMC hosts over 80 space weather models for Runs On Request (ROR), Continuous Runs and Instant Runs simulation services for the research community. In addition, CCMC has started to support simulation output onboarding in response to the Open Science initiative. Overall, we have accumulated over petabytes of simulation output data and are rapidly growing. In this presentation, we will discuss our data and storage challenges. We will present our attempts to address our challenges and any associated lessons learned. CCMC uses Apache Airflow to ensure data transfer is consistent. We will give a brief overview on how we leverage Apache Airflow to enhance our environment.

space weather↗

Big Data Challenges at the Community Coordinated Modeling Center (CCMC)

Like other research centers, the Community Coordinated Modeling Center (CCMC, https://ccmc.gsfc.nasa.gov) at NASA Goddard Space Flight Center (GSFC) is also experiencing the big data challenges. CCMC hosts over 80 space weather models for Runs On Request (ROR), Continuous Runs and Instant Runs simulation services for the research community. In addition, CCMC has started to support simulation output onboarding in response to the Open Science initiative. Overall, we have accumulated over petabytes of simulation output data and are rapidly growing. In this presentation, we will discuss our data and storage challenges. We will present our attempts to address our challenges and any associated lessons learned. CCMC uses Apache Airflow to ensure data transfer is consistent. We will give a brief overview on how we leverage Apache Airflow to enhance our environment.

space weather↗

Experimental Results from Integrated LCRD Low-Earth Orbit User Modem and Amplifier Terminal (ILLUMA-T) Program

The National Aeronautics and Space Administration’s (NASA) Integrated LCRD Low-Earth Orbit (LEO) User Modem and Amplifier Terminal (ILLUMA-T) payload was launched and installed on the International Space Station’s (ISS) Japanese Experiment Module - Exposed Facility (JEM-EF) in November 2023. ILLUMA-T was the first space-based user to communicate with NASA’s Laser Communications Relay Demonstration (LCRD) using free space optical communication to transfer data from the ISS at return rates to Earth of up to 1.244 Gbps and forward rates from Earth of up to 155 Mbps. A 6-month long Experiments Program on ILLUMA-T concluded in June 2024, after which the payload was removed from the ISS and is currently de-orbiting. The Experiments Program was carefully designed to understand and characterize the Pointing, Acquisition, and Track (PAT) process with the new Modular, Agile, Scalable Optical Terminal (MAScOT), optical modem performance, and end-to-end relay performance.

ISS↗

Handheld portable real-time tracking and communications device

Portable handheld real-time tracking and communications devices include; a controller module, communications module including global positioning and mesh network radio module, data transfer and storage module, and a user interface module enclosed in a water-resistant enclosure. Real-time tracking and communications devices can be used by protective force, security and first responder personnel to provide situational awareness allowing for enhance coordination and effectiveness in rapid response situations. Such devices communicate to other authorized devices via mobile ad-hoc wireless networks, and do not require fixed infrastructure for their operation.

47 OTHER INSTRUMENTATION↗

Assessing the Performance and Scalability of a Novel Multilevel K-Nomial Allgather on CORE-Direct Systems

In this paper, we propose a novel allgather algorithm, Reindexed Recursive K-ing (RRK), which leverages flexibility in the algorithm's tree topology and ability to make asynchronous progress coupled with Core-Direct communication offload capability to optimize the MPI-Allgather for Core-Direct enabled systems. In particular, the RRK introduces a reindexing scheme which ensures contiguous data transfers while adding only a single additional send and receive operation for any radix, k, or communicator size, N. This allows us to improve algorithm scalability by avoiding the use of a scatter/gather elements (SGE) list on InfiniBand networks. The implementations of the RRK algorithm and its evaluation shows that it performs and scales well on Core-Direct systems for a wide range of message sizes and various communicator configurations.

99 GENERAL AND MISCELLANEOUS↗

Progress towards accelerating HOMME on hybrid multi- core systems

The suitability of a spectral element based dynamical core (HOMME) within the Community Atmospheric Model (CAM) for GPU-based architectures is examined and initial performance results are reported. This work was done within a project to enable CAM to run at high resolution on next generation, multi-petaflop systems. The dynamical core is the present focus because it dominates the performance profile of our target problem. HOMME enjoys good scalability due to its underlying cubed-sphere mesh with full two-dimensional decomposition and the localization of all computational work within each element. The thread blocking and code changes that allow HOMME to effectively use GPUs are described along with a rewritten vertical remapping scheme which improves performance on both CPUs and GPUs. Validation of results in the full HOMME model is also described. Remaining issues affecting performance include optimizing the boundary exchanges for the case of multiple spectral elements being computed on the GPU and using multiple CUDA streams to overlap data transfers with computations.

99 GENERAL AND MISCELLANEOUS↗

Algal Lipids and Omega-3 Production via Autotrophic and Heterotrophic Pathways at Cellana?s Kona Demonstration Facility, Hawaii

Cellana?s Kona Demonstration Facility (KDF) is a 2.5 hectare facility, with 17,000 sq. ft. under roof and 1 hectare of cultivation systems. KDF is designed to execute and support all stages of the production process at pilot scale, from cultivation through extraction. Since Feb. 2009, KDF has been producing up to 0.7MT dry weight of algal biomass per month, while at the same time optimizing processes of cultivation, harvesting, dewatering and extraction. The cultivation system at KDF uses ALDUO? technology, a hybrid system of photobioreactors (PBRs) and open ponds. All fluid transfers related to KDF cultivation and harvesting processes are operated and monitored by a remote Process-Control System. Fluid transfer data, together with biochemical data, enable the mass balance calculations necessary to measure productivity. This poster summarizes methods to improve both biomass and lipids yield by 1) alleviating light limitation in open ponds, 2) de-oxygenation and 3) heterotrophic lipid production for post-harvesting cultures.

09 BIOMASS FUELS↗

Analyzing the Energy and Power Consumption of Remote Memory Accesses in the OpenSHMEM Model

PGAS models like OpenSHMEM provide interfaces to explicitly initiate one-sided remote memory accesses among processes. In addition, the model also provides synchronizing barriers to ensure a consistent view of the distributed memory at different phases of an application. The incorrect use of such interfaces affects the scalability achievable while using a parallel programming model. This study aims at understanding the effects of these constructs on the energy and power consumption behavior of OpenSHMEM applications. Our experiments show that cost incurred in terms of the total energy and power consumed depends on multiple factors across the software and hardware stack. We conclude that there is a significant impact on the power consumed by the CPU and DRAM due to multiple factors including the design of the data transfer patterns within an application, the design of the communication protocols within a middleware, the architectural constraints laid by the interconnect solutions, and also the levels of memory hierarchy within a compute node. This work motivates treating energy and power consumption as important factors while designing compute solutions for current and future distributed systems.

Jana, Siddhartha↗

Methods to Register Models and Input/Output Parameters for Integrated Modeling

Significant resources can be required when constructing integrated modeling systems. In a typical application, components (e.g., models and databases) created by different developers are assimilated, requiring the framework’s functionality to bridge the gap between the user’s knowledge of the components being linked. The framework, therefore, needs the capability to assimilate a wide range of model-specific input/output requirements as well as their associated assumptions and constraints. The process of assimilating such disparate components into an integrated modeling framework varies in complexity and difficulty. Several factors influence the relative ease of assimilating components, including, but not limited to, familiarity with the components being assimilated, familiarity with the framework and its tools that support the assimilation process, level of documentation associated with the components and the framework, and design structure of the components and framework. This initial effort reviews different approaches for assimilating models and their model-specific input/output requirements: 1) modifying component models to directly communicate with the framework (i.e., through an Application Programming Interface), 2) developing model-specific external wrappers such that no component model modifications are required, 3) using parsing tools to visually map pre-existing input/output files, and 4) describing and linking models as dynamic link libraries. Most of these approaches are illustrated using the widely distributed modeling system called Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES). The review concludes that each has its strengths and weakness, the factors that determine which approaches work best in a given application.

Data Transfer↗

AUTOMATED, HIGHLY ACCURATE VERIFICATION OF RELAP5-3D

Computer programs that analyze light water reactor safety solve complex systems of governing, closure and special process equations to model the underlying physics. In addition, these programs incorporate many other features and are quite large. RELAP5-3D[1] has over 300,000 lines of coding for physics, input, output, data management, user-interaction, and post-processing. For software quality assurance, the code must be verified and validated before being released to users. Verification ensures that a program is built right by checking that it meets its design specifications. Recently, there has been an increased importance on the development of automated verification processes that compare coding against its documented algorithms and equations and compares its calculations against analytical solutions and the method of manufactured solutions[2]. For the first time, the ability exists to ensure that the data transfer operations associated with timestep advancement/repeating and writing/reading a solution to a file have no unintended consequences. To ensure that the code performs as intended over its extensive list of applications, an automated and highly accurate verification method has been modified and applied to RELAP5-3D. Furthermore, mathematical analysis of the adequacy of the checks used in the comparisons is provided.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

flume-plugins Version 1.0

Flume-plugins are plugins for Apache Flume, which are used for managing data transferred through Apache Flume.

Chu, A. L.↗