Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Microstructural, optical and electrical investigations of Sb-SnO{sub 2} thin films deposited by spray pyrolysis

Highlights: • We controlled structural, morphological, electrical, optical and physical (such as band gap energy) properties by altering the Sb doping concentration. • Variation in bandgap with Sb concentration is in agreement with the Burstein–Moss hypothesis and this hypothesis was further confirmed by plotting E{sub g} vs n{sup 2/3}. • The resistivity and mobility are in the range of 1.512–6.624 × 10{sup −3} Ω cm and 9.75–22.96 cm{sup 2} V{sup −1} s{sup −1}. The e-density lies between 4.11 × 10{sup 19} and 4.24 × 10{sup 20} cm{sup −3}. • We observed that Sb substitution in SnO{sub 2} lattice decreases the crystallite size and the possible reason for this is the creation of Sb monolayer on the surface of SnO{sub 2} crystallite. - Abstract: The structural, optical and electrical properties of spray deposited antimony (Sb) doped tin oxide (SnO{sub 2}) thin films, prepared from SnCl{sub 4} precursor, have been studied as a function of antimony doping concentration. The doping concentration was varied from 0 to 1.5 wt.% of Sb. The analysis of X-ray diffraction patterns revealed that the as deposited doped and undoped tin oxide thin films are pure crystalline tetragonal rutile phase of tin oxide which belongs to the space group P4{sub 2}/mnm (number 136). The surface morphological examination with field emission scanning electron microscopy (FESEM) revealed the fact that the grains are closely packed and pores/voids between the grains are very few. The resistivity (ρ) and mobility (μ) are in the range of 1.512 × 10{sup −3}–6.624 × 10{sup −3} Ω cm and 9.75–22.96 cm{sup 2} V{sup −1} s{sup −1}. The electron density lies between 4.11 × 10{sup 19} and 4.24 × 10{sup 20} cm{sup −3}. A thorough electrical investigation reveals that the film's resistivity depends on carrier concentration. It is found that ionized impurity scattering is the dominant mechanism, which limits the mobility of the carriers. The transmittance spectra for as-deposited films were recorded in the wavelength range of 200–1000 nm. The transmittance of the films was observed to increase from 57% to 68% (at 800 nm) on initial addition of Sb (up to [Sb]/[Sn] = 0.5 wt.%) and then it is decreased for higher level of antimony doping ([Sb]/[Sn] >0.5 wt.%)

36 MATERIALS SCIENCE↗

Up-conversion routines of Er{sup 3+}–Yb{sup 3+} doped Y{sub 6}O{sub 5}F{sub 8} and YOF phosphors

Highlights: • Single-phase optical materials of Y{sub 6}O{sub 5}F{sub 8}:Er and YOF:Er were prepared. • Effective spectral converting properties were observed in Y{sub 6}O{sub 5}F{sub 8}:Er,Yb. • 980 nm diode laser was irradiated for up-converting analysis. • A multi-photon process in the phosphors was investigated. - Abstract: Optical materials composed of a Y{sub 6(1−p−q)}Er{sub 6p}Yb{sub 6q}O{sub 5}F{sub 8} (p = 0.001–0.1, q = 0.005–0.1) solid solution with Y{sub 0.99}Er{sub 0.01}OF were prepared via a solid-state reaction using excess NH{sub 4}F flux at 950 °C for 30 min. X-ray diffraction patterns of Y{sub 6(1−p−q)}Er{sub 6p}Yb{sub 6q}O{sub 5}F{sub 8} and Y{sub 0.99}Er{sub 0.01}OF were compared upon altering the synthesis temperature and the molar ratio of the NH{sub 4}F flux to the Y{sup 3+} (Er{sup 3+}, Yb{sup 3+}) ions. The effective spectral-conversion properties of Er{sup 3+} and Er{sup 3+}–Yb{sup 3+} ions in Y{sub 6}O{sub 5}F{sub 8} phosphors were monitored during excitation with a 980 nm wavelength diode-laser. Selection of appropriate Er{sup 3+} and/or Yb{sup 3+} concentrations in the Y{sub 6}O{sub 5}F{sub 8} structure led to achievement of the desired up-conversion emission, from the green to the red regions of the spectra. Furthermore, the mechanism of up-conversion in the phosphors was described by an energy-level schematic. Up-conversion emission spectra and the dependence of the emission intensity on pump power (between 193 and 310 mW) in the Y{sub 6(0.995−q)}Er{sub 0.03}Yb{sub 6q}O{sub 5}F{sub 8} phosphors were also investigated.

36 MATERIALS SCIENCE↗

Structural differences existing in bulk and nanoparticles of Y{sub 2}Sn{sub 2}O{sub 7}: Investigated by experimental and theoretical methods

Present manuscript deals with the structural changes associated with transformation of bulk Y{sub 2}Sn{sub 2}O{sub 7} into nanoparticles of Y{sub 2}Sn{sub 2}O{sub 7}. Nanoparticles of Y{sub 2}Sn{sub 2}O{sub 7} both undoped and Eu{sup 3+} doped, were prepared at a relatively low temperature (700 °C) and investigated for their structural and luminescence properties and compared them with that of bulk Y{sub 2}Sn{sub 2}O{sub 7} sample prepared by the solid-state method at 1300 °C. Significant distortion in geometry and electron density distribution around Y{sup 3+}/Eu{sup 3+} ions in nanoparticles are confirmed from the Rietveld refinement of the powder X-ray diffraction patterns and theoretical calculations based on the density functional theory (DFT). The SnO{sub 6} octahedron in Y{sub 2}Sn{sub 2}O{sub 7} is more expanded in nanoparticles compared to bulk. Iso-surface density distribution reveals that while bulk sample shows typical ionic feature in Y/Eu--O bonds, nanoparticle sample shows sharing of electron density along bond axis pertaining to covalent character. These inferences are further supported by the doped Eu{sup 3+} luminescence and calculated Ω{sub 2} and Ω{sub 4} parameters. - Graphical abstract: YO{sub 8} scalenohedron present in bulk and nanoparticles of Y{sub 2}Sn{sub 2}O{sub 7}.Variation of the electron density around Y{sup 3+} ions in YO{sub 8} polyhedron is also shown in bulk and nanoparticles of Y{sub 2}Sn{sub 2}O{sub 7}. The difference in the extent of ionic/covalent nature of the Y--O bond is clearly seen the contour plot of electron density. Highlights: ► YO{sub 8} scalenohedron is axially and equatorially distorted in Y{sub 2}Sn{sub 2}O{sub 7} nanoparticles. ► Enlargement of SnO{sub 6} octahedron in nanoparticles of Y{sub 2}Sn{sub 2}O{sub 7} compared to bulk. ► Less symmetric charge distribution around Y{sup 3+} ions in Y{sub 2}Sn{sub 2}O{sub 7} nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thickness dependent functional properties of PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}/La{sub 0.67}Sr{sub 0.33}MnO{sub 3} heterostructures

The ultra thin ferroelectric PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} (PZT) films with various thicknesses ranging from 100 (P100) to 10 (P10) nm were grown on La{sub 0.67}Sr{sub 0.33}MnO{sub 3}/(LaAlO{sub 3}){sub 0.3}(Sr{sub 2}AlTaO{sub 6}){sub 0.7} (LSMO/LSAT) (001) substrates deposited by pulsed laser deposition technique. The x-ray diffraction patterns of the heterostructures show only (00l) (l = 1 and/or 2) reflections corresponding to the LSAT substrate, PZT, and LSMO layers. The atomic force microscopy studies show that the root mean square surface roughnesses of P100 and P10 films are 2.39 and 0.99 nm, respectively. An increase of both real (ε′) and imaginary (ε″) permittivities was observed when thickness of PZT increases from 10 nm to 100 nm. Temperature dependent ε′ presents an anomaly, related to ferromagnetic-metal to paramagnetic-insulator transition of the LSMO, in the range of 350–500 K. The dielectric anomalies and magnetic phase transition temperature shifted to the lower temperature values with decrease in the PZT films thicknesses. The values of the remanent polarization (P{sub r}) and coercive field (E{sub c}) of the heterostructures were in the range of 24–42 μC/cm{sup 2}–170–1300 kV/cm. An appreciable increase of saturated magnetization (M{sub s}) was observed with increase of PZT layer thickness. The average M{sub s} values of PZT/LSMO heterostructure were 170, 150, 100, and 45 emu/cm{sup 3} for 100, 50, 25, and 10 nm at 300 K, respectively. Enhancement in magnetization with increase in PZT thickness may be due to the interface effect between PZT/LSMO layers.

36 MATERIALS SCIENCE↗

Microstructure and mechanical properties of bulk highly faulted fcc/hcp nanostructured cobalt microstructures

Nanostructured cobalt powders with an average particle size of 50 nm were synthesized using a polyol method and subsequently consolidated by spark plasma sintering (SPS). SPS experiments performed at 650 °C with sintering times ranging from 5 to 45 min under a pressure of 100 MPa, yielded to dense bulk nanostructured cobalt (relative density greater than 97%). X-ray diffraction patterns of the as-prepared powders showed only a face centered cubic (fcc) crystalline phase, whereas the consolidated samples exhibited a mixture of both fcc and hexagonal close packed (hcp) phases. Transmission electron microscopy observations revealed a lamellar substructure with a high density of nanotwins and stacking faults in every grain of the sintered samples. Room temperature compression tests, carried out at a strain rate of 10{sup −3} s{sup −1}, yielded to highest strain to fracture values of up to 5% for sample of holding time of 15 min, which exhibited a yield strength of 1440 MPa, an ultimate strength as high as 1740 MPa and a Young's modulus of 205 GPa. The modulus of elasticity obtained from the nanoindentation tests, ranges from 181 to 218 GPa. The lowest modulus value of 181 GPa was obtained for the sample with the highest sintering time (45 min), which could be related to mass density loss as a consequence of trapped gases releasing. - Highlights: • Co nanopowder (50 nm) was prepared by reduction in polyol medium. • SPS was used to process bulk nanostructured Co specimens. • Microstructures were made of intricate fcc/hcp, along with nanotwins and SFs. • High strengths and moderate compressive ductility were obtained. • Deformation mechanisms related to complex interplay of different length scales.

36 MATERIALS SCIENCE↗

Tunable silica shell and its modification on photoluminescent properties of Y{sub 2}O{sub 3}:Eu{sup 3+}-SiO{sub 2} nanocomposites

The core-shell rare earth (RE) doped nanophosphors are attracting current interests owing to their potential application in bio-images. Understanding the modification of core-shell structure on photoluminescent (PL) properties of RE ions is important in obtaining efficient nanophosphors. In this paper, Y{sub 2}O{sub 3}:Eu{sup 3+}-SiO{sub 2} composites with fixed cubic Y{sub 2}O{sub 3}:Eu{sup 3+} core ({approx}80 nm) and controllable thickness of silica shell ({approx}3-21 nm) were synthesized via a modified Stoeber method and characterized by x-ray diffraction patterns, transmission electronic microscope images, and Fourier-transform infrared absorption spectra. The dependences of PL properties of Y{sub 2}O{sub 3}:Eu{sup 3+} on the thickness of the silica shell and excitation power density were systemically studied under charge transfer excitation (254 nm) and {sup 7}F{sub J}-{sup 5}D{sub 2} inner-shell excitation (460-486 nm). It is interesting to observe that under {sup 7}F{sub J}-{sup 5}D{sub 2} excitation the intensity ratio of {sup 5}D{sub 0}-{sup 7}F{sub 2}/{sup 5}D{sub 0}-{sup 7}F{sub J} (J {ne} 2) for Eu{sup 3+} increases considerably with the increase of shell thickness and decreases with the increasing excitation power density, which confirms the variation of long-scale radiative energy transfer (RET) among Eu{sup 3+} ions and redistribution of {sup 5}D{sub 0}-{sup 7}F{sub J}(J = 0-4) transitions. And more, the radiative decay time of {sup 5}D{sub 0}-{sup 7}F{sub J} as a function of shell thickness demonstrates an optimum, which are assigned to the co-impacts of effective refractive index (n{sub eff}) and RET among Eu{sup 3+} ions.

36 MATERIALS SCIENCE↗

Room temperature dielectric and magnetic properties of Gd and Ti co-doped BiFeO{sub 3} ceramics

Room temperature dielectric and magnetic properties of BiFeO{sub 3} samples, co-doped with magnetic Gd and non-magnetic Ti in place of Bi and Fe, respectively, were reported. The nominal compositions of Bi{sub 0.9}Gd{sub 0.1}Fe{sub 1–x}Ti{sub x}O{sub 3} (x = 0.00-0.25) ceramics were synthesized by conventional solid state reaction technique. X-ray diffraction patterns revealed that the substitution of Fe by Ti induces a phase transition from rhombohedral to orthorhombic at x > 0.20. Morphological studies demonstrated that the average grain size was reduced from ∼1.5 μm to ∼200 nm with the increase in Ti content. Due to Ti substitution, the dielectric constant was stable over a wide range of high frequencies (30 kHz to 20 MHz) by suppressing the dispersion at low frequencies. The dielectric properties of the compounds are associated with their improved morphologies and reduced leakage current densities probably due to the lower concentration of oxygen vacancies in the compositions. Magnetic properties of Bi{sub 0.9}Gd{sub 0.1}Fe{sub 1–x}Ti{sub x}O{sub 3} (x = 0.00-0.25) ceramics measured at room temperature were enhanced with Ti substitution up to 20% compared to that of pure BiFeO{sub 3} and Ti undoped Bi{sub 0.9}Gd{sub 0.1}FeO{sub 3} samples. The enhanced magnetic properties might be attributed to the substitution induced suppression of spiral spin structure of BiFeO{sub 3}. An asymmetric shifts both in the field and magnetization axes of magnetization versus magnetic field curves was observed. This indicates the presence of exchange bias effect in these compounds notably at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric anomalies due to grain boundary conduction in chemically substituted BiFeO{sub 3}

We describe systematic studies on Nd and Mn co-doped BiFeO{sub 3}, i.e., (Bi{sub 0.95}Nd{sub 0.05})(Fe{sub 0.97}Mn{sub 0.03})O{sub 3} (BNFM) polycrystalline electroceramics. Raman spectra and X-ray diffraction patterns revealed the formation of rhombohedral crystal structure at room temperature, and ruled out structural changes in BiFeO{sub 3} (BFO) after low percentage chemical substitution. Strong dielectric dispersion and a sharp anomaly around 620 K observed near the Néel temperature (T{sub N} ∼ 643 K of BFO) support strong magneto-dielectric coupling, verified by the exothermic peak in differential thermal data. Impedance spectroscopy disclosed the appearance of grain boundary contributions in the dielectric data in the region, and their disappearance just near the Néel temperature suggests magnetically active grain boundaries. The resistive grain boundary components of the BNFM are mainly responsible for magneto-dielectric coupling. Capacitive grain boundaries are not observed in the modulus spectra and the dielectric behavior deviates from the ideal Debye-type. The ac conduction studies illustrate short-range order with ionic translations assisted by both large and small polaron hopping. Magnetic studies indicate that the weak antiferromagnetic phase of BNFM ceramics is dominated by a strong paramagnetic response (unsaturated magnetization even at applied magnetic field of 7 T). The bulk BNFM sample shows a good in-plane magnetoelectric coupling (ME) coefficient.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and characterization of Cr doped CoFe{sub 2}O{sub 4}

Polycrystalline samples of pure and Cr-doped cobalt ferrite (CoFe{sub 2}O{sub 4} and CoCrFeO{sub 4}) were prepared by solid state reaction route method. X-ray diffraction pattern infers that both the samples are in single phase with Fd3m space group. Slight reduction in the lattice parameter of CoCrFeO{sub 4} has been observed as compared to CoFe{sub 2}O{sub 4}. The dielectric dispersion has been explained on the basis of Fe{sup 2+} ↔ Fe{sup 3+} hopping mechanism. The polarizations at lower frequencies are mainly attributed to electronic exchange between Fe{sup 2+} ↔ Fe{sup 3+} ions on the octahedral site in the ferrite lattice. In the present system a part from n-type charge carrier (Fe{sup 3+}/Fe{sup 2+}), the presence of (Co{sup 3+}/Co{sup 2+}) ions give rise to p-type charge carrier. Therefore in addition to n-type charge carrier, the local displacement of p-type charge carrier in direction of external electric field also contributes to net polarization. However, the dielectric constant and loss tangent of CoCrFeO{sub 4} are found to be lower than CoFe{sub 2}O{sub 4} and is attributed to the availability of ferrous ion. CoCrFeO{sub 4} have less amount of ferrous ion available for polarization as compared to that of CoFe{sub 2}O{sub 4}. The impedance spectra reveal a grain interior contribution to the conduction process.

36 MATERIALS SCIENCE↗

Dual nutraceutical nanohybrids of folic acid and calcium containing layered double hydroxides

Dual nutraceutical nanohybrids consisting of organic nutrient, folic acid (FA), and mineral nutrient, calcium, were prepared based on layered double hydroxide (LDH) structure. Among various hybridization methods such as coprecipitation, ion exchange, solid phase reaction and exfoliation-reassembly, it was found that exfoliation-reassembly was the most effective in terms of intercalation of FA moiety between Ca-containing LDH layers. X-ray diffraction patterns and infrared spectra indicated that FA molecules were well stabilized in the interlayer space of LDHs through electrostatic interaction. From the atomic force and scanning electron microscopic studies, particle thickness of LDH was determined to be varied with tens, a few and again tens of nanometers in pristine, exfoliated and reassembled state, respectively, while preserving particle diameter. The result confirmed layer-by-layer hybrid structure of FA and LDHs was obtained by exfoliation-reassembly. Solid UV–vis spectra showed 2-dimensional molecular arrangement of FA moiety in hybrid, exhibiting slight red shift in n→π* and π→π* transition. The chemical formulae of FA intercalated Ca-containing LDH were determined to Ca{sub 1.30}Al(OH){sub 4.6}FA{sub 0.74}·3.33H{sub 2}O and Ca{sub 1.53}Fe(OH){sub 5.06}FA{sub 2.24}·9.94H{sub 2}O by inductively coupled plasma-atomic emission spectroscopy, high performance liquid chromatography and thermogravimetry, showing high nutraceutical content of FA and Ca. - Highlights: • We successfully intercalated FA molecules into Ca-containing LDHs. • Exfoliation-reassembly was proven to be the most effective. • The interaction between LDH and FA were studied by FT-IR and UV–vis spectra. • Thermal stability of FA were enhanced by electrostatic interaction with LDH layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring surface properties and structure of layered double hydroxides using silanes with different number of functional groups

Four silanes, trimethylchlorosilane (TMCS), dimethyldiethoxylsilane (DMDES), 3-aminopropyltriethoxysilane (APTES) and tetraethoxysilane (TEOS), were adopted to graft layered double hydroxides (LDH) via an induced hydrolysis silylation method (IHS). Fourier transform infrared spectra (FTIR) and {sup 29}Si MAS nuclear magnetic resonance spectra ({sup 29}Si MAS NMR) indicated that APTES and TEOS can be grafted onto LDH surfaces via condensation with hydroxyl groups of LDH, while TMCS and DMDES could only be adsorbed on the LDH surface with a small quantity. A combination of X-ray diffraction patterns (XRD) and {sup 29}Si MAS NMR spectra showed that silanes were exclusively present in the external surface and had little influence on the long range order of LDH. The surfactant intercalation experiment indicated that the adsorbed and/or grafted silane could not fix the interlamellar spacing of the LDH. However, they will form crosslink between the particles and affect the further surfactant intercalation in the silylated samples. The replacement of water by ethanol in the tactoids and/or aggregations and the polysiloxane oligomers formed during silylation procedure can dramatically increase the value of BET surface area (S{sub BET}) and total pore volumes (V{sub p}) of the products. - Graphical abstract: The replacement of water by ethanol in the tactoids and aggregations of LDHs, and the polysiloxane oligomers formed during silylation process can dramatically increase the BET surface area (S{sub BET}) and the total pore volume (V{sub p}) of the silylated products. - Highlights: • Silanes with multifunctional groups were grafted onto LDH surface in C{sub 2}H{sub 5}OH medium. • The number of hydrolysable groups in silanes affects the structure of grafted LDH. • Replacement of H{sub 2}O by C{sub 2}H{sub 5}OH in aggregations increases S{sub BET} and V{sub p} of grafted LDH. • Polysiloxane oligomers contribute to the increase of S{sub BET} and V{sub p} of grafted LDH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Undercooling and Cooling Rate on Peritectic Phase Crystallization Within Ni-Zr Alloy Melt

The liquid Ni-16.75 at. pct Zr peritectic alloy was substantially undercooled and containerlessly solidified by an electromagnetic levitator and a drop tube. The dependence of the peritectic solidification mode on undercooling was established based on the results of the solidified microstructures, crystal growth velocity, as well as X-ray diffraction patterns. Below a critical undercooling of 124 K, the primary Ni{sub 7}Zr{sub 2} phase preferentially nucleates and grows from the undercooled liquid, which is followed by a peritectic reaction of Ni{sub 7}Zr{sub 2}+L → Ni{sub 5}Zr. The corresponding microstructure is composed of the Ni{sub 7}Zr{sub 2} dendrites, peritectic Ni{sub 5}Zr phase, and inter-dendritic eutectic. Nevertheless, once the liquid undercooling exceeds the critical undercooling, the peritectic Ni{sub 5}Zr phase directly precipitates from this undercooled liquid. However, a negligible amount of residual Ni{sub 7}Zr{sub 2} phase still appears in the microstructure, indicating that nucleation and growth of the Ni{sub 7}Zr{sub 2} phase are not completely suppressed. The micromechanical property of the peritectic Ni{sub 5}Zr phase in terms of the Vickers microhardness is enhanced, which is ascribed to the transition of the peritectic solidification mode. To suppress the formation of the primary phase completely, this alloy was also containerlessly solidified in free fall experiments. Typical peritectic solidified microstructure forms in large droplets, while only the peritectic Ni{sub 5}Zr phase appears in smaller droplets, which gives an indication that the peritectic Ni{sub 5}Zr phase directly precipitates from the undercooled liquid by completely suppressing the growth of the primary Ni{sub 7}Zr{sub 2} phase and the peritectic reaction due to the combined effects of the large undercooling and high cooling rate.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and optical properties of the new lead fluoride borate-Pb{sub 2}BO{sub 3}F

A new compound, Pb{sub 2}BO{sub 3}F, has been grown by high temperature solution method from the PbO-PbF{sub 2}-B{sub 2}O{sub 3} system for the first time. The crystal structure of this compound has been identified by single crystal X-ray diffraction analysis. It crystallizes in the hexagonal system, space group P6{sub 3}/m (No. 176) with unit-cell parameters a=7.2460(3) A, c=14.5521(17) A, Z=6, V=661.69(9) A{sup 3}. Its structure was solved by the direct methods and refined to R{sub 1}=0.0163 and wR{sub 2}=0.0367. The structure of Pb{sub 2}BO{sub 3}F consists of the distorted PbO{sub 3}F{sub 2} groups and BO{sub 3} triangles, which are all symmetric with each other in the gestalt structure to the extent that the Pb{sub 2}BO{sub 3}F compound crystallizes in the symmetric space group. The powder X-ray diffraction pattern of the Pb{sub 2}BO{sub 3}F has been measured. The BO{sub 3} functional groups presented in the sample were identified by FTIR spectrum. The DTA curve of Pb{sub 2}BO{sub 3}F suggests that Pb{sub 2}BO{sub 3}F melts congruently at 448 deg. C. - Graphical Abstract: The Pb atoms are in the five coordination environments bonded to three O atoms and two F atoms to make up the distortional PbO{sub 3}F{sub 2} polyhedra. Every six PbO{sub 3}F{sub 2} polyhedra are connected by one F(1) atom to form the symmetrical structure, and then the distortion of the PbO{sub 3}F{sub 2} polyhedra is offset. Highlights: > A new compound, Pb{sub 2}BO{sub 3}F, has been grown by high temperature solution method from the PbO-PbF{sub 2}-B{sub 2}O{sub 3} system for the first time. > It crystallizes in the hexagonal system, space group P6{sub 3}/m (No. 176) with unit-cell parameters a=7.2460(3) A, c=14.5521(17) A, Z=6, V=661.69(9) A{sup 3}. > UV-vis-NIR Diffuse-Reflectance spectrum shows that its ultraviolet cutoff edge is about 288 nm. > DTA curve of Pb{sub 2}BO{sub 3}F suggests that Pb{sub 2}BO{sub 3}F melts congruently at 448 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

n-Alkylamine-assisted preparation of a high surface area vanadyl phosphate/tetraethylorthosilicate nanocomposite

Graphical abstract: CuK{sub α} X-ray diffraction patterns of the VP, VPOc, VPOcT, VPOcT200 and VPOcT500. Highlights: ► TEOS and octylamine incorporation into the VP was achieved by expanding the lamellar. ► The specific surface area increased from 15 m{sup 2} g{sup −1} in VP to 237 m{sup 2} g{sup −1} in VPOcT. ► The VPOcT exhibited thermal resistance up to 200 °C in air. ► Upon thermal treatment up to 500 °C, the surface area increased to 838 m{sup 2} g{sup −1}. -- Abstract: We have developed a vanadyl phosphate/tetraethylorthosilicate (VPO/TEOS) nanocomposite comprised of silicate chains interleaved with VPO layers, prepared by using an n-alkylamines such as octylamine as the structure directing agent. The nanocomposites were synthesized by reacting amine-intercalated vanadyl phosphate with tetraethylorthosilicate via the soft chemistry approach. The synthetic procedure encompassed the exfoliation of the layered vanadyl phosphate as well as the reorganization of this exfoliated solid into a mesostructured lamellar phase with the same V–P–O connectivity as in the original matrix. TEOS incorporation into the vanadyl phosphate was achieved by expanding the lamellar structure with n-alkylamine (Δd = 13 Å with n-octylamine). The specific surface area increased from 15 m{sup 2} g{sup −1} in the vanadyl phosphate matrix to 237 m{sup 2} g{sup −1} in VPOcT, and the isotherm curves revealed the characteristic hysteresis of mesoporous materials. Upon thermal treatment up to 500 °C, the surface area increased to 837 m{sup 2} g{sup −1}, which is suitable for catalytic purposes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Bi{sub 2}O{sub 3} seed layer on crystalline orientation and ferroelectric properties of Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} thin films prepared by rf-magnetron sputtering method

Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} (BLT) thin films with Bi{sub 2}O{sub 3} seed layers were prepared on Pt(111)/Ti/SiO{sub 2}/Si substrate by rf-magnetron sputtering method. The effect of annealing procedure, thickness, and position of Bi{sub 2}O{sub 3} seed layer on the structural and electrical properties of BLT thin film was investigated. When using a two-step annealing procedure, the x-ray diffraction pattern indicated that BLT thin film with a Bi{sub 2}O{sub 3} seed layer showed c-axis preference orientation. Compared with Pt/BLT/Bi{sub 2}O{sub 3}/Pt structure film, the Pt/Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3}/Pt structure film showed higher oriented to c direction. The ferroelectric property of BLT thin film improved remarkably with the incorporation of Bi{sub 2}O{sub 3} seed layer. Under the applied voltage of 14 V, the remnant polarization and coercive voltage of the Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3} capacitor with 18-nm-thick Bi{sub 2}O{sub 3} seed layer were 45.2 {mu}C/cm{sup 2} and 9.2 V, respectively. Moreover, the Pt/Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3}/Pt film with 18-nm-thick Bi{sub 2}O{sub 3} seed layers exhibited good fatigue endurance even after 6x10{sup 9} switching cycles, which was attributed to the double-sided Bi{sub 2}O{sub 3} layer. They decreased the grain boundary density by enhancing the grain size of BLT film and enhanced the c-axis preferential orientation. Compared with BLT film deposited directly on Pt, double-sided Bi{sub 2}O{sub 3} layer would greatly enhance the leakage current resistance of the BLT film.

36 MATERIALS SCIENCE↗

Crystal structure details of La- and Bi-substituted hydroxyapatites: Evidence for LaO{sup +} and BiO{sup +} with a very short metal–oxygen bond

Crystal structures of substituted apatites with general formula Ca{sub 10−x}M{sub x}(PO{sub 4}){sub 6}(OH{sub 1−δ}){sub 2−x}O{sub x}, where M=La, Bi, 0≤x<2, were refined using high-resolution X-ray powder diffraction patterns. Individual positions for Ca{sup 2+} and M{sup 3+}-ions localized near Ca2-site were determined. The M{sup 3+}-ion was found shifted toward the hexagonal channel center with respect to the Ca{sup 2+}-ion, forming very short bond with the intrachannel O{sup 2−}, while leaving considerably longer distances to other oxygen atoms, which suggested the existence of a MO{sup +} ion. Distinct bands of stretching M–O modes were observed in the Raman and FT-IR spectra of the compounds. The bond lengths for BiO{sup +} and LaO{sup +} were estimated to be 2.05(1) and 2.09(1) Å correspondingly. The latter was almost 0.3 Å lower than the shortest La–O bond in La{sub 2}O{sub 3}. The realization of such a strong lanthanide–oxygen bond in a crystal lattice could provide a very high axial ligand field and might be implemented to develop high-energy-barrier single-molecule magnets as well as to tune properties of lanthanide-based luminophores. - Graphical abstract: A fragment of the La-for-Ca substituted apatite crystal structure focusing on the La–O bond. - Highlights: • Individual positions in the apatite crystal lattice for a doping atom (La, Bi) and Ca. • The doping atom shifts toward the center of the hexagonal channel. • BiO{sup +} and LaO{sup +} with estimated short bond lengths of 2.05 and 2.09 Å respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Pr- and Nd- doping on structural, dielectric, and magnetic properties of multiferroic Bi{sub 0.8}La{sub 0.2}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}

Bi{sub 0.8}La{sub 0.15}RE{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} (where RE = Pr and Nd) have been prepared via conventional solid state route. The Rietveld refinement of X-ray diffraction patterns shows that both systems crystallize in orthorhombic Pnma space group. Raman modes observed for these two systems indicate that both systems are very close to orthorhombic Pnma structure. Appearance of prominent A{sub 1}-3 and weak E-2 modes in Bi{sub 0.8}La{sub 0.15}Nd{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} indicate the presence of chemically more active Bi-O covalent bonds (which favors stereochemical activity of Bi lone pair electrons) in comparison to Bi{sub 0.8}La{sub 0.15}Pr{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}. Moreover, Bi{sub 0.8}La{sub 0.15}Nd{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} system shows higher dielectric constant, low dielectric loss, and higher magnetization value in comparison to Bi{sub 0.8}La{sub 0.15}Pr{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} system. Ferroelectric transition temperature decreases to 460 °C for both systems in comparison to 710 °C of Bi{sub 0.8}La{sub 0.2}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}. The improved dielectric and magnetic response suggests Bi{sub 0.8}La{sub 0.15}Nd{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} a better multiferroic system than Bi{sub 0.8}La{sub 0.15}Pr{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence of non-isentropic release from high residual temperatures in shocked metals measured with ultrafast x-ray diffraction

Shock experiments are widely used to understand the mechanical and electronic properties of matter under extreme conditions. However, after shock loading to a Hugoniot state, a clear description of the post-shock thermal state and its impacts on materials is still lacking. We used diffraction patterns from 100-fs x-ray pulses to investigate the temperature evolution of laser-shocked Al–Zr metal film composites at time delays ranging from 5 to 75 ns driven by a 120-ps short-pulse laser. We found significant heating of both Al and Zr after shock release, which can be attributed to heat generated by inelastic deformation. A conventional hydrodynamic model that employs (i) typical descriptions of Al and Zr mechanical strength and (ii) elevated strength responses (which might be attributed to an unknown strain rate dependence) did not fully account for the measured temperature increase, which suggests that other strength-related mechanisms (such as fine-scale void growth) could play an important role in thermal responses under shock wave loading/unloading cycles. Our results suggest that a significant portion of the total shock energy delivered by lasers becomes heat due to defect-facilitated plastic work, leaving less converted to kinetic energy. This heating effect may be common in laser-shocked experiments but has not been well acknowledged. High post-shock temperatures may induce phase transformation of materials during shock release. Another implication for the study is the preservability of magnetic records from planetary surfaces that have a shock history from frequent impact events.

42 ENGINEERING↗