Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Formation dry-out from CO2 injection into saline acquifers: Part 2, Analytical model for salt precipitation

From a mass balance for water dissolved into the flowing CO{sub 2} stream, and a consideration of saturation profiles from the Buckley-Leverett (1942) fractional flow theory, we derive an equation that directly relates gas saturation S{sub g,d} at the dry-out front to temperature, pressure and salinity dependence of fluid properties. The equation is easily solved by iteration or interpolation. From gas saturation at the front we derive the average gas saturation in the dry-out region, from which we obtain the 'solid saturation' S{sub S}, i.e., the fraction of pore space filled with solid precipitate. Values of S{sub S} derived from this theory show excellent agreement with numerical simulations presented in the preceding companion paper ('Part 1'). Thus, from relative permeabilities and fluid properties at in situ conditions prior to CO{sub 2} injection, it is possible to directly make an accurate estimate of solids precipitation, without having to perform a numerical simulation of the injection process.

54 ENVIRONMENTAL SCIENCES↗

Radiation directivity rotation by acoustic metamaterials

We use a metamaterial-based scheme to rotate the radiation directivity of sound radiated by a source surrounded by the structure. The rotation is demonstrated through both numerical simulations and experiments. The performance persists within a broadband and is entirely independent of the location and pattern of source inside, suggesting great potential in various practical scenarios where both the signal frequency and source position may vary significantly. We have also investigated the possibility to realize versatile controls of radiation direction by tailoring the structural parameters. Our design with special directivity-steering capability may open route to loudspeaker and auditorium acoustics designs and medical ultrasound applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wave transmission through silicone foam pads in a compression Kolsky bar apparatus. Comparisons between simulations and measurements.

This memo concerns the transmission of mechanical signals through silicone foam pads in a compression Kolsky bar set-up. The results of numerical simulations for four levels of pad pre-compression and two striker velocities were compared directly to test measurements to assess the delity of the simulations. The nite element model simulated the Kolsky tests in their entirety and used the hyperelastic `hyperfoam' model for the silicone foam pads. Calibration of the hyperfoam model was deduced from quasi-static compression data. It was necessary, however, to augment the material model by adding sti ness proportional damping in order to generate results that resembled the experimental measurements. Based on the results presented here, it is important to account for the dynamic behavior of polymeric foams in numerical simulations that involve high loading rates.

47 OTHER INSTRUMENTATION↗

Collimated Fast Electron Emission from Long Wires Irradiated by Intense Femtosecond Laser Pulses

We have experimentally demonstrated that fast electrons emitted from a metallic wire irradiated by a 5x10{sup 18} W/cm{sup 2} laser pulse can be collimated along the wire, and that their intensity is significantly enhanced in the axial direction of the wire. As the wire length is increased up to 30 mm from the laser focal spot, the angular divergence of the emitted electrons with energies of hundreds of keV decreases to 65 mrad. Numerical simulations reveal that the electrons are trapped by the transient electric field surrounding the wire and guided along the axial direction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Steady-state properties of multi-orbital systems using quantum Monte Carlo

A precise dynamical characterization of quantum impurity models with multiple interacting orbitals is challenging. In quantum Monte Carlo methods, this is embodied by sign problems. A dynamical sign problem makes it exponentially difficult to simulate long times. A multi-orbital sign problem generally results in a prohibitive computational cost for systems with multiple impurity degrees of freedom even in static equilibrium calculations. Here, we present a numerically exact inchworm method that simultaneously alleviates both sign problems, enabling simulation of multi-orbital systems directly in the equilibrium or nonequilibrium steady-state. The method combines ideas from the recently developed steady-state inchworm Monte Carlo framework [Erpenbeck et al., Phys. Rev. Lett. 130, 186301 (2023)] with other ideas from the equilibrium multi-orbital inchworm algorithm [Eidelstein et al., Phys. Rev. Lett. 124, 206405 (2020)]. We verify our method by comparison with analytical limits and numerical results from previous methods.

Chemistry↗

COMPLEX SCATTERED RADIATION FIELDS AND MULTIPLE MAGNETIC FIELDS IN THE PROTOSTELLAR CLUSTER IN NGC 2264

Near-infrared imaging polarimetry in the J, H, and K{sub s} bands has been carried out for the protostellar cluster region around NGC 2264 IRS 2 in the Monoceros OB1 molecular cloud. Various infrared reflection nebula clusters (IRNCs) associated with NGC 2264 IRS 2 and the IRAS 12 S1 core, as well as local infrared reflection nebulae (IRNe), were detected. The illuminating sources of the IRNe were identified with known or new near- and mid-infrared sources. In addition, 314 point-like sources were detected in all three bands and their aperture polarimetry was studied. Using a color-color diagram, reddened field stars and diskless pre-main-sequence stars were selected to trace the magnetic field (MF) structure of the molecular cloud. The mean polarization position angle of the point-like sources is 81 Degree-Sign {+-} 29 Degree-Sign in the cluster core, and 58 Degree-Sign {+-} 24 Degree-Sign in the perimeter of the cluster core, which is interpreted as the projected direction on the sky of the MF in the observed region of the cloud. The Chandrasekhar-Fermi method gives a rough estimate of the MF strength to be about 100 {mu}G. A comparison with recent numerical simulations of the cluster formation implies that the cloud dynamics is controlled by the relatively strong MF. The local MF direction is well associated with that of CO outflow for IRAS 12 S1 and consistent with that inferred from submillimeter polarimetry. In contrast, the local MF direction runs roughly perpendicular to the Galactic MF direction.

79 ASTRONOMY AND ASTROPHYSICS↗

Outcomes from a Collaborative Approach to a Code Comparison Study for Enhanced Geothermal Systems

A code comparison study, supported by the U.S. Department of Energy, Geothermal Technologies Office, has recently been completed whose stated purpose was to test, diagnose differences, and demonstrate the state of modeling capabilities developed at national laboratories and academic institutes within the United States for modeling enhanced geothermal systems. This three-year study comprised two sets of problems; those classified as benchmark problems and those classified as challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. Study participants submitted solutions to problems for which their simulation tools were deemed capable or nearly capable. Some participating codes were originally developed for EGS applications whereas some others were designed for different applications but can simulate processes similar to those in EGS. Solution submissions from both were encouraged. In some cases participants made small incremental changes to their numerical simulation codes to address specific elements of the problem, and in other cases participants submitted solutions with existing simulation tools, acknowledging the limitations of the code. The challenge problems were based on the enhanced geothermal systems research conducted in hot dry rock at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995, covering two research stimulation, development and circulation phases in two separate reservoirs. Both challenge problems have specific questions to be answered via numerical simulation in three topical areas: 1) reservoir creation/stimulation, 2) reactive and passive transport, and 3) thermal recovery. Whereas the benchmark class of problems were designed to test capabilities for modeling coupled processes under strictly specified conditions, the stated objective for the challenge class of problems was to demonstrate what new understanding of the Fenton Hill experiments could be realized via the application of modern numerical simulation tools by recognized expert practitioners. Critical observations and data from the Fenton Hill experiments were varied and scattered among a number of individual experiments, and numerical simulation solutions were sought that satisfied as many observations at possible. Achieving agreement in multiple experimental observations from Fenton Hill often required participants to critically think about stimulation mechanisms involving natural and hydraulic fractures and re-evaluate their conceptual models and numerical solution approaches. This process has yielded new insights to Fenton Hill reservoirs and direction for future EGS research. The keys to the success of this study were the high quality numerical simulation tools available, the expertise of the developers and practitioners, and the collaborative approach to reporting preliminary results among the study participants. This paper describes results submitted to the challenge problems and the outcomes of a collaborative approach to conducting a code comparison study.

Enhanced Geothermal Systems, numerical simulation,↗

Analysis of electron dynamics and two mechanisms in a coaxial magnetic wiggler

The electron dynamics in a coaxial magnetic wiggler are analyzed numerically and studied in particle-in-cell (PIC) simulation. Electrons wiggle in angular direction to coherently generate a TE{sub 01} mode, and the results are consistent with each other. The trajectory of the electron in 3-D space and the effects on the trajectories of the initial phases of wiggler magnetic fields are researched, which helps to choose appropriate initial phases to control the trajectory of the electron. An oscillator of FEL with a coaxial magnetic wiggler based on a quasi cavity is designed for efficiently generating the TE{sub 01} mode with the high saturation power and high efficiency. The advantages of the quasi cavity structure are analyzed and the parameter-selection rules are investigated. Based on the electron dynamics, the process of electron bunching in the self amplified spontaneous emission (SASE) and the Seeded mechanisms are studied. The Seeded mechanism could accelerate electron bunching greatly and reduce the saturation time than the SASE by half.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NOISY WEAK-LENSING CONVERGENCE PEAK STATISTICS NEAR CLUSTERS OF GALAXIES AND BEYOND

Taking into account noise from intrinsic ellipticities of source galaxies, in this paper, we study the peak statistics in weak-lensing convergence maps around clusters of galaxies and beyond. We emphasize how the noise peak statistics is affected by the density distribution of nearby clusters, and also how cluster-peak signals are changed by the existence of noise. These are the important aspects to be thoroughly understood in weak-lensing analyses for individual clusters as well as in cosmological applications of weak-lensing cluster statistics. We adopt Gaussian smoothing with the smoothing scale {theta} {sub G} = 0.5arcmin in our analyses. It is found that the noise peak distribution near a cluster of galaxies sensitively depends on the density profile of the cluster. For a cored isothermal cluster with the core radius R{sub c} , the inner region with R {<=} R{sub c} appears noisy containing on average {approx}2.4 peaks with {nu} {>=} 5 for R{sub c} = 1.7arcmin and the true peak height of the cluster {nu} = 5.6, where {nu} denotes the convergence signal-to-noise ratio. For a Navarro-Frenk-White (NFW) cluster of the same mass and the same central {nu}, the average number of peaks with {nu} {>=} 5 within R {<=} R{sub c} is {approx}1.6. Thus a high peak corresponding to the main cluster can be identified more cleanly in the NFW case. In the outer region with R{sub c} < R {<=} 5R{sub c} , the number of high noise peaks is considerably enhanced in comparison with that of the pure noise case without the nearby cluster. For {nu} {>=} 4, depending on the treatment of the mass-sheet degeneracy in weak-lensing analyses, the enhancement factor f is in the range of {approx}5 to {approx}55 for both clusters as their outer density profiles are similar. The properties of the main-cluster-peak identified in convergence maps are also significantly affected by the presence of noise. Scatters as well as a systematic shift for the peak height are present. The height distribution is peaked at {nu} {approx} 6.6, rather than at {nu} = 5.6, corresponding to a shift of {Delta}{nu} {approx} 1, for the isothermal cluster. For the NFW cluster, {Delta}{nu} {approx} 0.8. The existence of noise also causes a location offset for the weak-lensing identified main-cluster-peak with respect to the true center of the cluster. The offset distribution is very broad and extends to R {approx} R{sub c} for the isothermal case. For the NFW cluster, it is relatively narrow and peaked at R {approx} 0.2R{sub c} . We also analyze NFW clusters of different concentrations. It is found that the more centrally concentrated the mass distribution of a cluster is, the less its weak-lensing signal is affected by noise. Incorporating these important effects and the mass function of NFW dark matter halos, we further present a model calculating the statistical abundances of total convergence peaks, true and false ones, over a large field beyond individual clusters. The results are in good agreement with those from numerical simulations. The model then allows us to probe cosmologies with the convergence peaks directly without the need of expensive follow-up observations to differentiate true and false peaks.

79 ASTRONOMY AND ASTROPHYSICS↗

CHANDRA AND HST IMAGING OF THE QUASARS PKS B0106+013 AND 3C 345: INVERSE COMPTON X-RAYS AND MAGNETIZED JETS

We present results from deep ({approx}70 ks) Chandra/ACIS observations and Hubble Space Telescope (HST) Advanced Camera for Surveys F475W observations of two highly optically polarized quasars belonging to the MOJAVE blazar sample, viz., PKS B0106+013 and 1641+399 (3C 345). These observations reveal X-ray and optical emissions from the jets in both sources. X-ray emission is detected from the entire length of the 0106+013 radio jet, which shows clear bends or wiggles-the X-ray emission is brightest at the first prominent kiloparsec jet bend. A picture of a helical kiloparsec jet with the first kiloparsec-scale bend representing a jet segment moving close(r) to our line of sight, and getting Doppler boosted at both radio and X-ray frequencies, is consistent with these observations. The X-ray emission from the jet end, however, peaks at about 0.''4 ({approx}3.4 kpc) upstream of the radio hot spot. Optical emission is detected both at the X-ray jet termination peak and at the radio hot spot. The X-ray jet termination peak is found upstream of the radio hot spot by around 0.''2 ({approx}1.3 kpc) in the short projected jet of 3C 345. HST optical emission is seen in an arc-like structure coincident with the bright radio hot spot, which we propose is a sharp (apparent) jet bend instead of a terminal point, that crosses our line of sight and consequently has a higher Doppler beaming factor. A weak radio hot spot is indeed observed less than 1'' downstream of the bright radio hot spot, but has no optical or X-ray counterpart. By making use of the parsec-scale radio and the kiloparsec-scale radio/X-ray data, we derive constraints on the jet Lorentz factors ({Gamma}{sub jet}) and inclination angles ({theta}): for a constant jet speed from parsec to kiloparsec scales, we obtain a {Gamma}{sub jet} of {approx}70 for 0106+013 and {approx}40 for 3C 345. On relaxing this assumption, we derive a {Gamma}{sub jet} of {approx}2.5 for both the sources. Upper limits on {theta} of {approx}13 Degree-Sign are obtained for the two quasars. Broadband (radio-optical-X-ray) spectral energy distribution (SED) modeling of individual jet components in both quasars suggests that the optical emission is from the synchrotron mechanism, while the X-rays are produced via the inverse Compton mechanism from relativistically boosted cosmic microwave background seed photons. The locations of the upstream X-ray termination peaks strongly suggest that the sites of bulk jet deceleration lie upstream (by a few kiloparsecs) of the radio hot spots in these quasars. These regions are also the sites of shocks or magnetic field dissipation, which reaccelerate charged particles and produce high-energy optical and X-ray photons. This is consistent with the best-fit SED modeling parameters of magnetic field strength and electron power-law indices being higher in the jet termination regions compared to the cores. The shocked jet regions upstream of the radio hot spots, the kiloparsec-scale jet wiggles and a 'nose cone'-like jet structure in 0106+013, and the V-shaped radio structure in 3C 345, are all broadly consistent with instabilities associated with Poynting-flux-dominated jets. A greater theoretical understanding and more sensitive numerical simulations of jets spanning parsec to kiloparsec scales are needed, however, to make direct quantitative comparisons.

79 ASTRONOMY AND ASTROPHYSICS↗

Evolution of magnetohydrodynamic waves in low layers of a coronal hole

Although a coronal hole is permeated by a magnetic field with a dominant polarity, magnetograms reveal a more complex magnetic structure in the lowest layers, where several regions of opposite polarity of typical size of the order of 10{sup 4} km are present. This can give rise to magnetic separatrices and neutral lines. MHD fluctuations generated at the base of the coronal hole by motions of the inner layer of the solar atmosphere may interact with such inhomogeneities, leading to the formation of small scales. This phenomenon is studied on a 2D model of a magnetic structure with an X-point, using 2D MHD numerical simulations. This model implements a method of characteristics for boundary conditions in the direction outer-pointing to Sun surface to simulate both wave injection and exit without reflection. Both Alfvénic and magnetosonic perturbations are considered, and they show very different phenomenology. In the former case, an anisotropic power-law spectrum forms with a dominance of perpendicular wavevectors at altitudes ∼10{sup 4} km. Density fluctuations are generated near the X-point by Alfvén wave magnetic pressure and propagate along open fieldlines at a speed comparable to the local Alfvén velocity. An analysis of energy dissipation and heating caused by the formation of small scales for the Alfvénic case is presented. In the magnetosonic case, small scales form only around the X-point, where a phenomenon of oscillating magnetic reconnection is observed to be induced by the periodic deformation of the magnetic structure due to incoming waves.

79 ASTRONOMY AND ASTROPHYSICS↗

Validation of neutron emission and neutron energy spectrum calculations on a Mega Ampere Spherical Tokamak with directional relativistic spectrum simulator

The recently developed directional relativistic spectrum simulator (DRESS) code has been validated for the first time against numerical calculations and experimental measurements performed on the Mega Ampere Spherical Tokamak . In this validation, the neutron emissivities and rates computed by DRESS are benchmarked against TRANSP/NUBEAM predictions while the neutron energy spectra provided by DRESS taking as input TRANSP/NUBEAM and ASCOT/BBNBI in Gyro-Orbit mode fast ion distributions are validated against proton pulse height spectra measured by the neutron flux monitor. Finally, excellent agreement was found between DRESS and TRANSP/NUBEAM predictions of local and total neutron emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new method to trace three-dimensional magnetic field structure within molecular clouds using dust polarization

The complete three-dimensional structure of the magnetic field within molecular clouds has eluded determination despite its high value in determining controlling factors in the star formation process, as it cannot be directly probed observationally. Considering that inclination of the magnetic field relative to the plane of sky is one of the major sources of depolarization of thermal emission from dust in molecular clouds, we propose a new method to estimate the inclination angle of the cloud-scale magnetic field based on the statistical properties of the observed polarization fraction. We test this method using a series of Monte Carlo experiments and find that the method works well, provided that deviations of magnetic field direction from the averaged values are small. When applied to synthetic observations of numerical simulations of star-forming clouds, our method gives fairly accurate measurements of the mean magnetic field inclination angle (within 10°–25°), which can further be improved if we restrict our technique to regions of low dispersion in polarization angles S. We tested our method on the BLASTPol polarimetric observations of the Vela C molecular cloud complex, which suggests that the magnetic field of Vela C has a high inclination angle (~60°), consistent with previous analyses.

79 ASTRONOMY AND ASTROPHYSICS↗

Storage and switching of multiple optical signals among three channels

We experimentally and theoretically demonstrate that multioptical signals can be effectively stored and retrieved by fractional stimulated Raman adiabatic passage technique in a tripod-type four-level {sup 87}Rb atomic system. The optical pulses stored can be controllably released into two of the three different channels. The restored pulses have the same frequency, polarization, and propagation direction as the writing pulses. The experimental results fit very well with the numerical simulations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Spectrum of Weak Magnetohydrodynamic Turbulence

Turbulence of magnetohydrodynamic waves in nature and in the laboratory is generally cross-helical or nonbalanced, in that the energies of Alfven waves moving in opposite directions along the guide magnetic field are unequal. Based on high-resolution numerical simulations it is proposed that such turbulence spontaneously generates a condensate of the residual energy E{sub v}-E{sub b} at small field-parallel wave numbers. As a result, the energy spectra of Alfven waves are generally not scale invariant in an inertial interval of limited extent. In the limit of an infinite Reynolds number, the universality is asymptotically restored at large wave numbers, and both spectra attain the scaling E(k)propor tok{sub perpendicular}{sup -2}. The generation of a condensate is apparently related to the breakdown of mirror symmetry in nonbalanced turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bus Clustering for Distribution Grid Topology Identification

Recovering the distribution grid topology is essential to perform several distribution system operator functions. Many algorithms that address the topology recovery problem have already been proposed in the literature. Most are based on a priori information regarding which buses are fed by which substation; however, this information might not be available because frequent grid reconfigurations change the distribution grid portion connected to each substation. This paper addresses the problem of assigning every substation the set of buses that it is feeding, given field data. First, the aforementioned task is cast as a nonconvex optimization problem. Second, a relaxed version of the optimization problem is solved via the alternating direction method of multipliers. Finally, the performance of our approach is validated through numerical simulations of realistic scenarios using a standard IEEE benchmark feeder.

bus clustering↗

EQSIM—A multidisciplinary framework for fault-to-structure earthquake simulations on exascale computers part I: Computational models and workflow

Computational simulations have become central to the seismic analysis and design of major infrastructure over the past several decades. Most major structures are now “proof tested” virtually through representative simulations of earthquake-induced response. More recently, with the advancement of high-performance computing (HPC) platforms and the associated massively parallel computational ecosystems, simulation is beginning to play a role in increased understanding and prediction of ground motions for earthquake hazard assessments. However, the computational requirements for regional-scale geophysics-based ground motion simulations are extreme, which has restricted the frequency resolution of direct simulations and limited the ability to perform the large number of simulations required to numerically explore the problem parametric space. In this article, recent developments toward an integrated, multidisciplinary earth science-engineering computational framework for the regional-scale simulation of both ground motions and resulting structural response are described with a particular emphasis on advancing simulations to frequencies relevant to engineered systems. This multidisciplinary computational development is being carried out as part of the US Department of Energy (DOE) Exascale Computing Project with the goal of achieving a computational framework poised to exploit emerging DOE exaflop computer platforms scheduled for the 2022–2023 timeframe.

58 GEOSCIENCES↗

Performance and Reliability of Bonded Interfaces for High-temperature Packaging: Annual Progress Report

As maximum device temperatures approach 200 °Celsius, continuous operation, sintered silver materials promise to maintain bonds at these high temperatures without excessive degradation rates. A detailed characterization of the thermal performance and reliability of sintered silver materials and processes has been initiated for the next year. Future steps in crack modeling include efforts to simulate crack propagation directly using the extended finite element method (X-FEM), a numerical technique that uses the partition of unity method for modeling discontinuities such as cracks in a system.

30 DIRECT ENERGY CONVERSION↗