Search NASA⌕ Search

SEARCH · Search NASA

Results for “Failures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Human versus automation in responding to failures: an expected-value analysis

A simple analytical criterion is provided for deciding whether a human or automation is best for a failure detection task. The method is based on expected-value decision theory in much the same way as is signal detection. It requires specification of the probabilities of misses (false negatives) and false alarms (false positives) for both human and automation being considered, as well as factors independent of the choice--namely, costs and benefits of incorrect and correct decisions as well as the prior probability of failure. The method can also serve as a basis for comparing different modes of automation. Some limiting cases of application are discussed, as are some decision criteria other than expected value. Actual or potential applications include the design and evaluation of any system in which either humans or automation are being considered.

NASA Discipline Space Human Factors↗

Sympathetically mediated hypertension in autonomic failure

BACKGROUND: Approximately 50% of patients with primary autonomic failure have supine hypertension. We investigated whether this supine hypertension could be driven by residual sympathetic activity. METHODS AND RESULTS: In patients with multiple system atrophy (MSA) or pure autonomic failure (PAF), we studied the effect of oral yohimbine on seated systolic blood pressure (SBP), the effect of ganglionic blockade (with trimethaphan) on supine SBP and plasma catecholamine levels, and the effect of alpha(1)-adrenoreceptor blockade (phentolamine) on supine SBP. The SBP response to yohimbine was greater in patients with MSA than in those with PAF (area under the curve, 2248+/-543 versus 467+/-209 mm Hg. min; P=0.022). MSA patients with a higher supine SBP had a greater response than those with a lower supine SBP (3874+/-809 versus 785+/-189 mm Hg. min; P=0. 0017); this relationship was not seen in PAF patients. MSA patients had a marked depressor response to low infusion rates of trimethaphan; the response in PAF patients was more variable. Plasma norepinephrine decreased in both groups, but heart rate did not change in either group. At 1 mg/min, trimethaphan decreased supine SBP by 67+/-8 and 12+/-6 mm Hg in MSA and PAF patients, respectively (P<0.0001). Cardiac index and total peripheral resistance decreased in MSA patients by 33.4+/-5.8% and 40.7+/-9.5%, respectively (P=0. 0015). Patients having a depressor response to trimethaphan also had a depressor response to phentolamine. In MSA patients, the pressor response to yohimbine and the decrease in SBP with 1 mg/min trimethaphan were correlated (r=0.98; P=0.001). CONCLUSIONS: Residual sympathetic activity drives supine hypertension in MSA. It contributes to, but does not completely explain, supine hypertension in PAF.

Non-NASA Center↗

Abnormalities in intracellular calcium regulation and contractile function in myocardium from dogs with pacing-induced heart failure

24 d of rapid ventricular pacing induced dilated cardiomyopathy with both systolic and diastolic dysfunction in conscious, chronically instrumented dogs. We studied mechanical properties and intracellular calcium (Ca2+i) transients of trabeculae carneae isolated from 15 control dogs (n = 32) and 11 dogs with pacing-induced cardiac failure (n = 26). Muscles were stretched to maximum length at 30 degrees C and stimulated at 0.33 Hz; a subset (n = 17 control, n = 17 myopathic) was loaded with the [Ca2+]i indicator aequorin. Peak tension was depressed in the myopathic muscles, even in the presence of maximally effective (i.e., 16 mM) [Ca2+] in the perfusate. However, peak [Ca2+]i was similar (0.80 +/- 0.13 vs. 0.71 +/- 0.05 microM; [Ca2+]o = 2.5 mM), suggesting that a decrease in Cai2+ availability was not responsible for the decreased contractility. The time for decline from the peak of the Cai2+ transient was prolonged in the myopathic group, which correlated with prolongation of isometric contraction and relaxation. However, similar end-diastolic [Ca2+]i was achieved in both groups (0.29 +/- 0.05 vs. 0.31 +/- 0.02 microM), indicating that Cai2+ homeostasis can be maintained in myopathic hearts. The inotropic response of the myopathic muscles to milrinone was depressed compared with the controls. However, when cAMP production was stimulated by pretreatment with forskolin, the response of the myopathic muscles to milrinone was improved. Our findings provide direct evidence that abnormal [Ca2+]i handling is an important cause of contractile dysfunction in dogs with pacing-induced heart failure and suggest that deficient production of cAMP may be an important cause of these changes in excitation-contraction coupling.

Non-NASA Center↗

Yield and Failure Behavior Investigated for Cross-Linked Phenolic Resins Using Molecular Dynamics

Molecular dynamics simulations were conducted to fundamentally evaluate the yield and failure behavior of cross-linked phenolic resins at temperatures below the glass transition. Yield stress was investigated at various temperatures, strain rates, and degrees of cross-linking. The onset of non-linear behavior in the cross-linked phenolic structures was caused by localized irreversible molecular rearrangements through the rotation of methylene linkers followed by the formation or annihilation of neighboring hydrogen bonds. The yield stress results, with respect to temperature and strain rate, could be fit by existing models used to describe yield behavior of amorphous glasses. The degree of cross-linking only indirectly influences the maximum yield stress through its influence on glass transition temperature (Tg), however there is a strong relationship between the degree of cross-linking and the failure mechanism. Low cross-linked samples were able to separate through void formation, whereas the highly cross-linked structures exhibited bond scission.

Molecular dynamics↗

Failure Analysis and Recovery of a 50mm Highly Elastic Intermetallic NiTi Ball Bearing for an ISS Application

The ISS Distillation Assembly centrifuge is the pathfinder application for 50mm bore, deep-groove ball bearings made from the highly elastic intermetallic material 60NiTi. Superior corrosion and shock resistance are required to withstand the acidic wastewater exposure and heavy spacecraft launch related loads that challenge conventional steel bearings. During early ground testing one bearing unexpectedly and catastrophically failed after operating for only 200 hours of run time. A second bearing running on the same shaft was completely unaffected. A thorough investigation into the root cause of the failure determined that an excessively tight press-fit of the bearing outer race coupled with NiTis relatively low elastic modulus were key contributing factors. The proposed failure mode was successfully duplicated by experiment. To further corroborate the root cause theory, a successful bearing life test using improved installation practices (selective fitting) was conducted. The results show that NiTi bearings are suitable for space applications provided that care is taken to accommodate their unique material characteristics.

intermetallics↗

Failure Analysis and Recovery of a 50 MM Highly Elastic Intermetallic NiTi Ball Bearing for an ISS Application

The ISS Distillation Assembly centrifuge is the pathfinder application for 50mm bore, deep-groove ball bearings made from the highly elastic intermetallic material 60NiTi. Superior corrosion and shock resistance are required to withstand the acidic wastewater exposure and heavy spacecraft launch related loads that challenge conventional steel bearings. During early ground testing one bearing unexpectedly and catastrophically failed after operating for only 200 hours of run time. A second bearing running on the same shaft was completely unaffected. A thorough investigation into the root cause of the failure determined that an excessively tight press-fit of the bearing outer race coupled with NiTis relatively low elastic modulus were key contributing factors. The proposed failure mode was successfully duplicated by experiment. To further corroborate the root cause theory, a successful bearing life test using improved installation practices (selective fitting) was conducted. The results show that NiTi bearings are suitable for space applications provided that care is taken to accommodate their unique material characteristics.

failure analyses↗

Yield and Failure Behavior Investigated for Cross-linked Phenolic Resins Using Molecular Dynamics

Molecular dynamics simulations were conducted to fundamentally evaluate the yield and failure behavior of cross-linked phenolic resins at temperatures below the glass transition. Yield stress was investigated at various temperatures, strain rates, and degrees of cross-linking. The onset of non-linear behavior in the cross-linked phenolic structures was caused by localized irreversible molecular rearrangements through the rotation of methylene linkers followed by the formation or annihilation of neighboring hydrogen bonds. The yield stress results, with respect to temperature and strain rate, could be fit by existing models used to describe yield behavior of amorphous glasses. The degree of cross-linking only indirectly influences the maximum yield stress through its influence on the glass transition temperature (Tg), however there is a strong relationship between the degree of cross-linking and the failure mechanism. Low cross-linked samples were able to separate through void formation, whereas the highly cross-linked structures exhibited bond scission.

Stress-strain curves↗

OSMA Digital Evolution: R&M Physics of Failure (PoF) Handbook

At the intersection of mission, technology, and place is NASA’s need to modernize for a digital-forward future. Therefore, NASA’s Reliability & Maintainability (R&M) Enterprise Data Sharing team is working to leverage both Digitization and Digital Transformation to develop and share best practices and methodologies across NASA. One such cutting edge methodology is Physics of Failure. Therefore NASA OSMA's R&M office is developing a Reliability Physics of Failure Handbook in order to keep our engineers current and on the cutting edge of anlayis methodologies to help ensure NASA’s optimize and achieve continued success.

Digital Transformation↗

Arecibo Observatory Auxiliary M4N Socket Termination Failure Investigation

The NASA Engineering and Safety Center (NESC) was requested to support the Arecibo Observatory failure investigation in determining the root cause of the Auxiliary M4N cable failure. The NESC and Kennedy Space Center led an integrated NASA investigation with support from Marshall Space Flight Center and The Aerospace Corporation that included forensic investigation of failed hardware, finite element modeling, materials characterization, and root cause analysis. This document contains the outcome of the NESC Assessment.

Zinc Spelter Sockets↗

OSMA Digital Evolution: R&M Physics of Failure (PoF) Handbook

At the intersection of mission, technology, and place is NASA’s need to modernize for a digital-forward future. Therefore, NASA’s Reliability & Maintainability (R&M) Enterprise Data Sharing team is working to leverage both Digitization and Digital Transformation to develop and share best practices and methodologies across NASA. One such cutting edge methodology is Physics of Failure. Therefore NASA OSMA's R&M office is developing a Reliability Physics of Failure Handbook in order to keep our engineers current and on the cutting edge of analysis methodologies to help ensure NASA’s optimize and achieve continued success. "

Digital transformation↗

NASA Methodology for Physics of Failure-Based Reliability Assessments Handbook

At the intersection of mission, technology, and place is NASA’s need to modernize for a digital-forward future. Therefore, NASA’s Reliability & Maintainability (R&M) Enterprise Data Sharing team is working to leverage both Digitization and Digital Transformation to develop and share best practices and methodologies across NASA. One such cutting edge methodology is Physics of Failure. Therefore NASA OSMA's R&M office is developing a Reliability Physics of Failure Handbook in order to keep our engineers current and on the cutting edge of analysis methodologies to help ensure NASA’s optimize and achieve continued success.

Reliability Engineering↗

NASA Physics of Failure (PoF) Handbook Update

At the intersection of mission, technology, and place is NASA’s need to modernize for a digital-forward future. Therefore, NASA’s Reliability & Maintainability (R&M) Enterprise Data Sharing team is working to leverage both Digitization and Digital Transformation to develop and share best practices and methodologies across NASA. One such cutting edge methodology is Physics of Failure. Therefore NASA OSMA's R&M office is developing a Reliability Physics of Failure Handbook in order to keep our engineers current and on the cutting edge of anlayis methodologies to help ensure NASA’s optimize and achieve continued success.

Digital transformation↗

Failure-Tolerant Avionics for Crewed Space Systems Recommended Best Practices

This paper provides an overview of some of the major steps needed to mature and justify the design of an avionics system for crewed spacecraft. It is organized as a collection of artifacts or pieces of evidence that NASA needs to assess the system at design reviews, including a functional failure modes and effects analysis (FFMEA), fault containment region (FCR) definitions, the failure hypothesis, and reliability analysis. This paper is intended as a reference for designers working on NASA crewed spaceflight projects, reliability engineers responsible for avionics system assessments, and program managers wanting to understand what evidence is required at design reviews to ensure crew safety and mission success.

Avionics↗

Study of effects of failure of beamline elements and their compensation in CW superconducting linac

Project-X is the proposed high intensity proton facility to be built at Fermilab, US. First stage of the Project-X consists of superconducting linac which will be operated in continuous wave (CW) mode to accelerate the beam from 2.5 MeV to 3 GeV. The operation at CW mode puts high tolerances on the beam line components, particularly on radiofrequency (RF) cavity. The failure of beam line elements at low energy is very critical as it results in mis-match of the beam with the following sections due to different beam parameters than designed parameter. It makes the beam unstable which causes emittance dilution, and ultimately results in beam losses. In worst case, it could affect the reliability of the machine and may lead to the shutdown of the Linac to replace the failed elements. Thus, it is important to study these effects and their compensation to get smooth beam propagation in linac. This paper describes the results of study performed for the failure of RF cavity & solenoid in SSR0 section.

43 PARTICLE ACCELERATORS↗