Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fluids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

NEAMS Thermal-Fluids Test Stand for Fluoride-Slat Cooled, High Temperature Reactor Development (Final CRADA Report)

The work performed in this CRADA resulted in significant progress toward the development of a Thermal-fluid test-stand based on NEAMS tools. Significant work has been achieved in this area with simulations performed in Nek5000 of the heat and fluid flow in twisted tube heat exchangers and various software and modeling improvements in SAM geared toward heat exchanger simulations. In particular a set of simulations of flow and heat transfer in twisted elliptical tube geometries has been performed with Nek5000. The method was validated by simulating a case at a moderate Reynolds number and relatively high Froude number. This case was demonstrated to predict a Nusselt number in excellent agreement with the applicable correlation found in literature. It was further shown that at lower Froude numbers, this agreement becomes much worse. Additional cases were then simulated with low Froude numbers for both a square and a triangular unit cell to test the effect of pitch-to-maximum diameter ratio for the purposes of future CFD modeling. The results have proven invaluable to understand the flow physics in twisted tubes and provide reference data for design. Results have been summarized in a conference article. Moreover, work in SAM has led to significant improvement of software quality, the creation of a set of benchmarks for natural circulation and other significant software improvement.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Evaporation Submodel Development for Volume of Fluid (eVOF) Method Applicable to Spray-Wall Interaction Including Film Characteristics with Validation at High Pressure and Temperature Conditions

Internal combustion engines have seen a great evolution over the last several decades through application of high pressure direct injection, multiple injections, and other technologies to reduced fuel consumption, NOx, and PM. Although combustion systems with advanced injection strategies have been studied extensively, there exists a significant fundamental knowledge gap on the fuel-spray interactions with the piston surface and chamber walls. Advanced computational codes validated with experimental techniques have to be developed for accurate representation of the drop impingement, fuel film formation, and vaporization. Current engine CFD (Computational Fluid Dynamics) spray models utilize a Lagrangian framework for modeling which lacks critical considerations of the physics pertaining to these interactions and thus requiring extensive parameterization, tuning and validation. The team from Michigan Technological University, University of Massachusetts Dartmouth, and Argonne National Laboratory is composed of experts in sprays, combustion, engines and CFD with a wide spectrum of knowledge including specific expertise in the area under consideration. In the proposed work, a VOF (Volume of Fluid) modeling approach has been adopted for the spray-wall interaction, film formation and spreading, and vaporization. With the inclusion of a vaporization submodel, a more predictive and accurate simulation of the spray-film was performed without extensive need of parameterization and tuning. Extensive experimentation of the spray-wall interaction under the range of conditions matching the thermodynamic and surface temperatures that occur in diesel and gasoline engines were conducted to validate the SWI submodels and for development of the evaporation submodel, which has been implemented in the flow solver.

42 ENGINEERING↗
DOE OSTI2021

Computational Fluid Dynamics Modeling to Simulate a Combined Reforming Process for Syngas and Hydrogen Production

An Oxygen Transport Membrane (OTM) combined reforming technology for producing syngas and hydrogen integrates the advantages of multiple processes—steam methane reforming (SMR), autothermal reforming (ATR), an air separation unit (ASU)—into a single integrated technology. The OTM consists of a primary reforming tube, in which desulfurized natural gas is partially reformed by steam at high pressure in the presence of a metal catalyst. This process is followed in series by a ceramic OTM with a secondary reformer, in which residual methane reforms and O 2 - ions react with a portion of the CO and H 2 fuel to provide the heat to support both primary and secondary reforming. Although the OTM combined reformer technology for syngas and H 2 production has been substantially developed in the last decade, several challenges that affect the overall production efficiency and reliability are yet to be fully understood, addressed, and resolved. Therefore, developing Computational Fluid Dynamics (CFD) models that incorporate fluid dynamics, mass transport, kinetics, heat transport, and structural mechanics is critical to understanding and minimizing the probability of tube failures during the startup and operation. In this report, an exhaustive literature review was performed to survey the current state of technology for producing syngas and H 2 using either conventional or renewable energy sources. The feedstocks reviewed include natural gas and coal for the conventional technologies, whereas biomass, solar, wind, and nuclear energy for the renewable technologies. The existing industry-grade COMSOL multiphysics models of OTM were upgraded for the latest software release. In addition, they were improved to help achieve grid and solver independence and were successfully ported on the ORNL high-performance computing clusters to speed up their run times. A 42% reduction in the simulation run time was achieved. A new higher-fidelity CFD model of an OTM tube was developed in the StarCCM+ simulation platform. This new model was designed to simulate various physics using first principles, e.g., turbulent flow, heat transfer, and chemical reactions while avoiding unnecessary simplifications. The resulting predictions were qualitatively assessed and provided useful insights into the multiphysics complexity of an OTM tube.

08 HYDROGEN↗
DOE OSTI2022

Internal erosion, particle transport, and channelization driven by fluid flow

The investigations summarized in this final technical report were accomplished under Department of Energy, Basic Energy Sciences research grant number DE-SC0010274 titled Internal erosion, particle transport, and channelization driven by fluid flow, $196,683 from 07/15/13 to 12/31/17, and $149,999 from 01/01/18 to 12/31/21. The work focused on developing physical models of fluid driven evolution of sediment beds as a result of dissolution and erosion of embedded particles that lead to channelization and fracture networks in porous rock. The grant work has resulted in seven peer reviewed publications, with another one currently under review, all of which are listed at the end of the report. These publications can be freely accessed through a technical library or directly from the publisher for a nominal fee. The main results obtained during the last grant cycle are described in brief in the following.

58 GEOSCIENCES↗
DOE OSTI2022

A Higher Order, Stable Partitioned Scheme for Fluid-Structure Interaction Problems

Although still a very active area of research with many open questions, there exist highly-accurate and efficient algorithms for numerically estimating solutions to the equations of fluid motion. Similarly, great strides have been made in numerically modeling the motion of solids. However, there exist many practical applications where one must solve both fluid and structure in tandem. There is a gap in the literature for high order unconditionally stable partitioned algorithms for problems of this type. We investigate a new partitioned scheme which shows promise in filling this gap. We use a finite-element-based model with an added mass approach on problems coupling the Euler beam equation with the incompressible Navier-Stokes equations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Computational Fluid Dynamics Simulations to Predict Oxidation in Heat Recovery Steam Generator Tubes

Heat Recovery Steam Generators (HRSGs) are widely used across United States in combined cycle power plants to recover waste heat from the gas turbine (GT). HRSGs are used either to generate electricity or to produce process steam for industrial applications. The primary components of HRSG consists of a duct and a heat exchanger (HX). It is known across the power industry that the high temperature oxidation and ensuing exfoliation problem is a major cause for the damage of HX materials of HRSG. Alloys and/or coatings that can prevent or mitigate oxidation are very expensive, therefore they must be used or applied on the select regions of the HX tubes where the tendency of oxide formation is the highest. The main goal of this project is to identify such regions through Computational Fluid Dynamics (CFD) simulations. Therefore, in this work, we developed a CFD framework using commercial code StarCCM+ for the prediction of the fluid flow and heat transfer in a HRSG and associated oxidation inside the tubes of the HX. The developed CFD framework was verified and validated with experimental data before deployment. We also developed an innovative method to model the effect of the fins on the heat transfer and the pressure drop using a porous media model (PMM) approach to keep the mesh size within reasonable limits. After validation, we performed high-fidelity CFD simulations of a real-scale HRSG using the PMM, with High Performance Computing (HPC) resources of ORNL. From the simulation results, we acquired oxide thickness maps for all the tubes of the select HX sections of HRSG prone to oxidation. These oxide maps can inform regions of the HX tubes that requires oxide-resistant coatings, thereby guiding engineers for cost-efficient manufacturing of the HX that can combat oxidation in HRSGs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Regulatory Considerations Regarding Potential High Temperature Fluid Releases in Advanced Reactor Designs

The current effort is supported by the U.S. Department of Energy (DOE), Advanced Reactor Demonstration Program (ARDP) Regulatory Development, Regulatory Framework Modernization area, which seeks to address potential regulatory challenges for advanced reactor vendors that are currently or will soon be initiating the licensing process. In pursuit of this goal, this effort seeks to aid the advanced reactor industry and regulatory bodies in understanding and addressing the potential occurrence of high-temperature fluid releases in advanced reactor designs as part of licensing and regulatory oversight of operation. Improving the awareness and understanding of the behavior and potential consequences associated with high-temperature fluid release events can ensure that they are appropriately considered and addressed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Third Annual Report on Development of Microwave Resonant Cavity Transducer for Fluid Flow Sensing

We are investigating a microwave resonant cavity transducer for flow sensing in the vessel of a high temperature fluid advanced reactor (AR), such as a molten salt cooled reactor (MSCR) or a sodium fast reactor (SFR). This transducer is a hollow metallic cylindrical cavity, with one of the flat walls of the cylinder flexible enough to undergo microscopic deflection due to dynamic fluid pressure. Membrane deflection leads to a shift in the microwave resonant frequency, which can be detected with a spectrum analyzer.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Pushing the Boundaries of Relativistic Fluid Dynamics: From Particle Colliders to Neutron Star Mergers

This project aimed at establishing connections between fluid dynamics, kinetic theory, and string theory to develop new tools to characterize the far-from-equilibrium properties of relativistic systems, which are instrumental in understanding the emergence of liquid-like behavior of the quark-gluon plasma formed in heavy-ion collisions. This project investigated the fundamental properties of viscous fluids in the full nonlinear regime to pave the way for the systematic inclusion of viscous effects in future numerical simulations of neutron star mergers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Radial drift of plasma blobs in a toroidal magnetic field with fully kinetic and reduced fluid models

In curved magnetic geometries, field-aligned regions of enhanced plasma pressure and density, termed ‘blobs,’ move as coherent filaments across the magnetic field lines. Coherent blobs account for a significant fraction of transport at the edges of magnetic fusion experiments and arise in naturally-occurring space plasmas. This work examines the dynamics of blobs with a fully kinetic electromagnetic particle-in-cell code and with a drift-reduced fluid code. In low-beta regimes with moderate blob speeds, good agreement is found in the maximum blob velocity between the two simulation schemes and simple analytical estimates. The fully kinetic code demonstrates that blob speeds saturate near the initial sound speed, which is a regime outside the validity of the reduced fluid model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Isothermal Compressor Computational Fluid Dynamics Simulations (Final Report)

Carnot Compression is a startup company developing an innovative technology for air and gas compression. This technology is inherently oil-free and isothermal due to the use of water to simultaneously compress and cool the gas throughout the process. Isothermal gas compression eliminates the need to cool the compressed gas so it may lead to significant energy savings. The development of Carnot’s isothermal compressor is limited by the lack of insight into the flow and detailed behavior of the fluids (water and air/gas) inside the air end. Previous and current attempts at Computational Fluid Dynamics (CFD) simulations by Carnot have been unable to provide the level of accuracy required to use simulations for technology development. In this Cooperative Research and Development Agreement (CRADA) project, Oak Ridge National Laboratory (ORNL) used the CFD package Star-CCM+ to successfully develop a CFD simulation, providing the much-needed insight required to speed up the development. The work is intended to enable Carnot Compression to unlock its technology potential to a level sufficient for commercialization of the intended first product. The work will also prepare Carnot to scale the technology to much larger and more energy intensive applications, positioning it to broaden the product applications. Successful development of the technology has the potential to result in 20% or more efficiency gains for compression processes, or about $3 billion in annual energy savings potential for the U.S. alone.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

MOOSE-Based Fast Reactor Core Bowing Capabilities: Coupled Structural Mechanics – Thermal Fluids Demonstration and Related Verification Efforts

Under the U.S. Department of Energy Office of Nuclear Energy’s Advanced Modeling and Simulation (NEAMS) Program, an integrated multiphysics approach is being developed to model the core bowing phenomena important to liquid metal-cooled fast reactors. Core bowing is an important passive safety mechanism in liquid metal-cooled fast reactors and involves multiphysics effects including radiation transport, fluid flow, heat transfer, and mechanical response to temperature and flux gradients. Verification and assessment efforts continued on the Multiphysics Object Oriented Simulation Environment (MOOSE) capabilities relevant for modeling thermo-mechanical core bowing behavior. IAEA Verification Problem 4, which was started in FY23, was further examined with MOOSE capabilities to rectify discrepancies observed in previous years when compared to IAEA benchmark participant data. Meshing and postprocessing capabilities in MOOSE were also advanced by other teams and utilized this year. A thermal fluids-structural mechanical coupling demonstration has performed on 7-assemblyand 19-assembly fast reactor assembly configurations using MOOSE. Subchannel capabilities are used to calculate coolant temperature, and heat conduction capabilities calculate duct wall temperature as well as heat transfer through the inter-assembly gap. Structural mechanical capabilities then deform the mesh, accounting for contact between assemblies, according to the temperature gradients calculated by the thermal solvers. Power distributions are imposed rather than calculated to demonstrate different deformations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Intrabasin Comparison of Produced Fluid From Hydraulically Fractured Wells in the Permian Region

The Permian Basin is the highest producing oil and gas reservoir in the United States. Hydrocarbon extraction methods in this region are often associated with frac hits, or interwell communication events where an established well is affected by the pumping of fracture fluid into a new well. Our previous work revealed a unique geochemical signal indicating the presence of frac hits in the Permian Basin. We returned to this area with the overall goal of expanding our understanding of the microbial and geochemical dynamics common in this region. To do so, we collected produced water from 25 unique sites across the Permian Basin, 10 of which had previously been characterized during an active frac hit with the rest being novel. For each sample, we measured the pH, alkalinity, geochemical composition, microbial load (qPCR), and microbial community composition (16S rRNA sequencing). Permian Basin produced water is characterized by higher sulfate and lower total dissolved solids (TDS) concentrations compared to other regions. Interestingly, wells impacted by frac hits have a geochemical profile that resembles that of fracture fluid, with both lowered sulfate and lowered TDS concentrations compared to unaffected wells in this region. Due to the year-long recovery window between sample collection periods, we anticipate that all of our data will be characterized by the typical high sulfate, low TDS concentrations.

environmental microbiology↗
DOE OSTI2024

Exploring the Feasibility of INCONEL® ALLOY 740H® for Power Plant Headers: Integrating Machine Learning with Computational Fluid Dynamics (CFD)

This keynote presentation explores the behavior of headers—essential components of pipeline systems—using ANSYS simulation software and machine learning techniques. The study aims to predict the thermal and mechanical performance of headers under diverse conditions through both steady-state and transient simulations. We investigate critical parameters such as heat transfer coefficient, fluid velocity, and temperature to optimize header design. Conducted as part of a DOE project led by NCAT in collaboration with UNC Charlotte, this research encompasses multiple key topics. The initial section focuses on the behavior of header systems under steady-state conditions using ANSYS simulation. It underscores the importance of headers in industrial infrastructure, especially in the energy sector, and examines the implications of material selection and flow direction on heat transfer dynamics. Methodologically, we employ Computational Fluid Dynamics (CFD) analysis through ANSYS, detailing the development of models, material properties, geometry specifications, boundary conditions, and meshing strategies. Our simulations explore various operational parameters, including temperature and mass flow rates, crucial for predicting heat transfer coefficients and enhancing header design. Results from the study include parametric investigations into mesh sensitivity, viscosity model evaluations, and the effects of heat transfer locations, all validated against theoretical calculations. We conclude with insights on mesh optimization, the suitability of viscosity models, and recommendations for future research aimed at improving header system efficiency and sustainability in industrial applications.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Intrabasin Comparison of the Microbiology and Geochemistry of Produced Fluid From Hydraulically Fractured Wells in the Permian Region

The Permian Basin is the highest producing oil reservoir in the United States. Hydrocarbon extraction methods in this region are often associated with frac hits, or interwell communication events where an established well is affected by the pumping of fracture fluid into a new well. Our previous work revealed a geochemical signal indicating the presence of frac hits in the Permian Basin. We returned to this area with the goal of expanding our understanding of subsurface interactions common in this region. To do so, we collected produced water from 25 unique sites across the Permian Basin, 10 of which had previously been characterized during an active frac hit. For each sample, we measured the pH, alkalinity, geochemistry, microbial load, and microbial community composition. Permian Basin produced water is characterized by higher sulfate and lower total dissolved solids (TDS) concentrations compared to other regions. Interestingly, wells impacted by frac hits have a geochemical profile that resembles that of fracture fluid, with both lowered sulfate and lowered TDS concentrations compared to unaffected wells. Due to the year-long recovery window between sample collection periods, we anticipate that all our data will be characterized by the typical high sulfate, low TDS concentrations.

geochemistry↗
DOE OSTI2025

Next Generation Heat Transfer Fluids for Two-Phase Immersion Cooling of Data Centers

The purpose of this study is to evaluate the performance of next generation dielectric fluids in a Two-Phase Immersion Cooling (2PIC) system, which was designed for use in data centers. Hence, this report contains the performance evaluations of a new developmental dielectric fluid, Opteon™ 2P50, in a commercially available small-scale 2PIC system under typical and off-design range of operating conditions. Accordingly, ambient temperature and thermal loads were varied to simulate different ambient conditions. Additionally, this research report describes the development of a semi-empirical lumped model to predict the energy efficiency of the 2PIC system using Opteon™ 2P50 across a wide range of conditions. The model aims to offer a comprehensive understanding of the system’s efficiency and potential improvements. The outcomes of this study are expected to contribute to the adoption of sustainable 2PIC cooling technologies in data centers.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Hypersonic Fluid–Structure Interaction on a Cone–Slice–Ramp Geometry

In this study, fluid–structure interactions were measured between a representative control surface and the hypersonic flow deflected by it. The control surface is simplified as a spanwise finite ramp placed on a longitudinal slice of a cone. The front surface of the ramp contains a thin panel designed to respond to the unsteady fluid loading arising from the shock-wave/boundary-layer interactions. Experiments were conducted at Mach 5 and Mach 8 with ramps of different angles. High-speed schlieren captured the unsteady flow dynamics and accelerometers behind the thin panel measured its structural response. Panel vibrations were dominated by natural modes that were excited by the broadband aerodynamic fluctuations arising in the flowfield. However, increased structural response was observed in two distinct flow regimes: 1) attached or small separation interactions, where the transitional regime induced the strongest panel fluctuations. This was in agreement with the observation of increased convective undulations or bulges in the separation shock generated by the passage of turbulent spots, and 2) large separated interactions, where shear layer flapping in the laminar regime produced strong panel response at the flapping frequency. In addition, panel heating during the experiment caused a downward shift in its natural mode frequencies.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Red-green-bleached redox interfaces in the proximal Permian Cutler red beds: implications for regional fluid alteration

Siliciclastic strata of the Colorado Plateau attract attention for their striking red, green, bleached, and variegated colors that potentially record both early depositional and later diagenetic events. We investigated the proximal-most strata of the Paradox Basin, from their onlap contact with the Precambrian basement of the Uncompahgre Plateau to the younger Cutler strata exposed within 10 km of the Uncompahgre Plateau to attempt to understand the significance of the striking colors that occur here. These strata preserve a complex geology associated with buried paleorelief and sediment-related permeability variations at a major basin-uplift interface. Strata exposed within ~1.5 km of the onlap contact exhibit a pervasive drab color in contrast to the generally red colors that predominate farther from this front. In-between, strata commonly host variegated red/green/bleached intercalations. Thin-section petrography, SEM, XRD, Raman spectroscopy, Mössbauer spectroscopy, and whole-rock geochemistry of samples representing different color variations from demonstrate that water–rock interactions charged the rocks with Fe(II) that persists primarily in the phyllosilicate fraction. Color variations reflect grain-size differences that allowed the reduction of fluids from regional fault and basement/fill contacts to permeate coarser-grained Cutler sediments. Hematite and chlorite occur in both red and green sediments but are absent in the bleached sediments. Pervasive hematite in both red and green layers suggests that sediments were hematite-rich before later alteration. Chlorite and smectite are elevated in green samples and inversely correlated with biotite content. Green coloration is generally associated with 1) coarser grain sizes, 2) spatial association with basement contacts, 3) elevated smectite and/or chlorite, 4) less total Fe but greater Fe(II)/Fe(III) primarily in the phyllosilicate fraction, and 5) uranium enrichment. The bleached coloration reflects the removal of pigmentary Fe(III) oxide, while the green coloration is due to the removal of pigmentary hematite and the abundance of Fe(II)-bearing phyllosilicates. Abundant mixed-layer and swelling clays such as smectite, illite/smectite, and chlorite/smectite (including tosudite) dominate the mineralogy of the clay fraction. These results are consistent with other studies demonstrating fault-associated fluid alteration in the Paradox Basin region. However, the pervasive greening was not observed in many of these studies and appears to reflect the unique aspects of the paleovalley system and the importance of biotite alteration to Fe(II)-bearing phyllosilicates.

58 GEOSCIENCES↗