Search NASA⌕ Search

SEARCH · Search NASA

Results for “IMPLOSIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Laser wavelength dependence of laser imprint

In laser direct-drive inertial confinement fusion, laser imprint is one of the major causes of degradation in target performance through its seeding of hydrodynamic instabilities. Early experiments and simulations have shown that laser imprint could be mitigated with a longer laser wavelength because of its lower critical density and longer conduction zone. Building upon this work, we explore a scenario where the laser wavelength during the picket pulse differs from that of the main pulse in order to gain the benefit of reduced imprint, while avoiding losses in drive coupling efficiency or an increase in laser-plasma instabilities. A series of 2D radiation-hydrodynamic simulations, which test three different laser wavelengths for the picket pulse, has been performed, where the intensity of the picket pulse is adjusted in order to maintain the same implosion adiabat. A detailed analysis of the growth of the mass density modulations at the ablation front over a large range of mode numbers confirms that the laser imprint can be mitigated with a picket pulse operating at a longer wavelength than the main pulse because of the longer conduction zone and enhanced thermal smoothing. The amplitude of the ablation front modulations is found to be lower for all mode numbers, which reduces the seeding of the Rayleigh–Taylor instability without affecting the mode growth rates.

Fourier analysis↗
DOE OSTI2026

Nuclear activation analysis of zirconium-90 isomeric and ground-state reactions at the OMEGA Laser Facility

Nuclear activation is a well-established technique for inferring neutron yields in laser direct-drive deuterium–tritium (DT) and deuterium–deuterium (D 2 ) implosions at the OMEGA Laser Facility. Zirconium has long been considered an excellent candidate for measuring DT neutron fusion yields by observing decays of the 90 Zr(n,2n) 89 Zr ground-state reaction. As it has a higher energy threshold than present activation detectors utilizing copper, zirconium provides a means to infer primary neutron yields that are less susceptible to being skewed due to neutron scattering within the experimental environment. However, with a 78.41-h half-life, it is not operationally practical to utilize this reaction for OMEGA experiments, which have a 1-h shot cycle. Zirconium’s 90 Zr(n,2n) 89 mZr reaction presents itself as a viable candidate to infer neutron yields within a shot cycle, given its half-life of 4.16 min. Here, we present an overview of the approach and methodology, utilizing first principles techniques, to infer the primary neutron yields from OMEGA DT fusion experiments by using both the isomeric and the ground-state reaction. Yields inferred from both reactions are compared, which are in good agreement between the two.

Activation analysis↗
DOE OSTI2026

Inferring performance metrics for laser direct drive experiments on OMEGA

Quantifying performance improvements on the OMEGA laser facility requires robust inference of established no-alpha performance metrics, which requires, at minimum, a model to infer the shocked fuel mass and pressure of the confined fusion plasma. In this work, we describe the methodology used to infer performance metrics on OMEGA and present the current state-of-the art model used to infer these metrics from OMEGA experiments. In particular, since neutron images of cryogenic implosions are not available on OMEGA at present, we present how x-ray sizes are determined on OMEGA using a Gaussian Process regression model and how the neutron production region's size is inferred from them. As a result, we end by benchmarking the model using synthetic data and 1-D LILAC simulations and test its experimental self-consistency across available x-ray diagnostic channels.

Gopalaswamy, V. [Laboratory for Laser Energetics, ↗
DOE OSTI2026

The next-generation particle x-ray temporal diagnostic for simultaneous time-resolved measurements of nuclear-burn and x-ray emission histories in support of basic-science and inertial confinement fusion experiments at OMEGA

The next-generation Particle X-ray Temporal Diagnostic (PXTD) has been implemented for simultaneous measurements of x-ray, charged particle, and neutron emission histories from a wide range of inertial confinement fusion and high energy density plasma experiments, demonstrating excellent timing accuracy and greatly improved experimental flexibility. The key changes to the previously fielded system are a redesigned set of thin foil filters in front of the scintillators and individual neutral density filters for each region of the detector. The fully implemented PXTD system can provide unique information about the evolution of ion and electron temperatures in multi-ion and kinetic-physics experiments, proton radiography experiments, and DT experiments executed at the OMEGA facility. The system has 35 ps time resolution and negligible relative timing uncertainty between measured emission history signals. The first use of the upgraded four-channel PXTD system during a set of D 3 He-filled silica-glass implosions on OMEGA captured electron temperatures with a minimum uncertainty of 0.5 keV and resolved both the relative timings and widths of neutron, proton, and x-ray peaks within a single recorded image.

Evans, T. E. [Massachusetts Inst. of Technology (M↗
DOE OSTI2026

Spherical compression of an applied magnetic field in inertial confinement fusion

Applying an external magnetic field to laser-driven inertial confinement fusion implosions is a promising approach for enhancing fusion yield. The field is compressed with the plasma, producing a magnetized hotspot that anisotropically suppresses thermal losses and traps alpha particles, making performance sensitive to the compressed field orientation. Here, we derive a simple, readily applicable analytic model that enables rapid evaluation of the compressed field topology and show that ablation into the hotspot amplifies the central field, while the ablated ice near the hotspot edge develops a decaying, radially bent field, with a discontinuity in the field direction. The radially bent field renders thermal insulation at the hotspot edge negligible and largely independent of the applied field strength, whereas insulation in the hotspot core still depends strongly on the applied field. Applying the model to non-axial initial field configurations, we find that an initially applied mirror field provides the greatest suppression, followed by the standard axial field.

Physics - Plasma physics↗
DOE OSTI2026

Reduced instability growth and improved radiation trapping with optimized shock timing in double-shell inertial confinement fusion capsules

The double shell is a volume-burn inertial confinement fusion concept consisting of two concentric shells: a low-Z outer shell that collides with and transfers momentum to a high-Z inner shell which compresses and heats the thermonuclear fuel. The increased number of capsule interfaces and severe hydrodynamic instability of the high-density pusher during its acceleration phase provide challenges to the success of the double shell. Two-dimensional radiation-hydrodynamics simulations predict the hydrodynamic instability growth on the outer surface of the pusher can be greatly reduced through appropriate timing of two shocks that cross this interface. One of these shocks, unique to multi-shell designs, arises from radiation-driven ablation of the inner shell ahead of the main shock, the second shock of concern. The shock timing is optimized by increasing the thickness of a low-Z tamper layer exterior to the pusher, resulting in only minimal changes to the implosion timing. Reducing the instability growth on the outer surface of the high-Z pusher can dramatically decrease the modulations that feedthrough to the pusher inner surface, improving the efficacy of radiation trapping in the thermonuclear fuel and increasing the predicted thermonuclear yield by ≳20×.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Rayleigh–Taylor instabilities in high-energy density settings on the National Ignition Facility

Here, the Rayleigh–Taylor (RT) instability occurs at an interface between two fluids of differing density during an acceleration. These instabilities can occur in very diverse settings, from inertial confinement fusion (ICF) implosions over spatial scales of ~10 –3 – 10 –1 cm (10–1,000 μm) to supernova explosions at spatial scales of ~10 12 cm and larger. We describe experiments and techniques for reducing (“stabilizing”) RT growth in high-energy density (HED) settings on the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory. Three unique regimes of stabilization are described: ( i ) at an ablation front, ( ii ) behind a radiative shock, and ( iii ) due to material strength. For comparison, we also show results from nonstabilized “classical” RT instability evolution in HED regimes on the NIF. Examples from experiments on the NIF in each regime are given. These phenomena also occur in several astrophysical scenarios and planetary science.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Quantum computation of stopping power for inertial fusion target design

Stopping power is the rate at which a material absorbs the kinetic energy of a charged particle passing through it—one of many properties needed over a wide range of thermodynamic conditions in modeling inertial fusion implosions. First-principles stopping calculations are classically challenging because they involve the dynamics of large electronic systems far from equilibrium, with accuracies that are particularly difficult to constrain and assess in the warm-dense conditions preceding ignition. Here, we describe a protocol for using a fault-tolerant quantum computer to calculate stopping power from a first-quantized representation of the electrons and projectile. Our approach builds upon the electronic structure block encodings of Su et al. [ PRX Quant. 2 , 040332 (2021)], adapting and optimizing those algorithms to estimate observables of interest from the non-Born–Oppenheimer dynamics of multiple particle species at finite temperature. We also work out the constant factors associated with an implementation of a high-order Trotter approach to simulating a grid representation of these systems. Ultimately, we report logical qubit requirements and leading-order Toffoli costs for computing the stopping power of various projectile/target combinations relevant to interpreting and designing inertial fusion experiments. We estimate that scientifically interesting and classically intractable stopping power calculations can be quantum simulated with roughly the same number of logical qubits and about one hundred times more Toffoli gates than is required for state-of-the-art quantum simulations of industrially relevant molecules such as FeMoco or P450.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

The Origins of Blast-Loaded Vessels

As the Manhattan Project shifted to the theory of implosion assembly in 1944, plutonium was extremely rare and large uncertainties surrounded the function of the Gadget. For these reasons, a team within the Manhattan Project began another ambitious experiment: to confine the effects of detonating two tons of high explosives and enable the recovery of precious plutonium! No data existed on the subject, and the team faced numerous challenges as they engineered what is believed to be the world’s first blast-loaded confinement vessel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

Laser shock XAFS studies at OMEGA facility [HPR invited paper on XAFS]

State-of-the-art laser facilities offer an excellent opportunity for studying materials at Mbar-Gbar pressures by dynamical compression. In this paper, we summarize recent experiments on EXAFS measurements of compressed solid iron up to 5 Mbar using OMEGA laser facility. The X-ray source is produced by a spherical implosion, providing enough brightness and spectral smoothness required for EXAFS measurements. The compression path is tuned by laser pulse shaping to achieve off-hugoniot states. Lastly, with an anharmonic model, the density, temperature and upper limit of strength of the compressed iron are determined from EXAFS data. Prospects of XAFS study of other materials are also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Evaluation of Polyimide/Carbon Composite Films for Capsule Support

Capsules in National Ignition Facility targets are conventionally supported by thin polymer films. Recent experiments have shown that these films add significant perturbations to the implosion. Here in this paper, we evaluate stiffer polyimide composite films for use in a new target design that has been predicted to reduce these perturbations. The films are evaluated by their contact radius to the capsule for different deflections and the force they generate at those deflections to center the capsule. We find that a composite film with a single-sided coating of carbon produces the best results and show the performance of these films in target assemblies, highlighting the importance of the indentation depth.

36 MATERIALS SCIENCE↗
DOE OSTI2017

The National Direct-Drive Program: OMEGA to the National Ignition Facility

The goal of the National Direct-Drive Program is to demonstrate and understand the physics of laser direct drive (LDD). Efforts are underway on OMEGA for the 100-Gbar Campaign to demonstrate and understand the physics for hot-spot conditions and formation relevant for ignition at the 1-MJ scale, and at the National Ignition Facility to develop an understanding of the direct-drive physics at long scale lengths for the MJ Direct-Drive Campaign. For this paper the strategy of the National Direct-Drive Program is described; the requirements for the DT cryogenic fill-tube target being developed for OMEGA are presented; and preliminary LDD implosion measurements of hydrodynamic mixing seeded by laser imprint, the target-mounting stalk, and microscopic surface debris are reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Fabrication, Assembly, and Metrology of the Neutron Imaging Pinhole

The neutron imaging pinhole is a complex aperture that is designed to have its image plane at the center of a laser fusion capsule implosion. The aperture’s high-Z materials of tungsten and gold block the neutrons so that only the neutrons passing through the machined apertures make it to the image plane and detector. The pinhole assembly consists of 11 layers of gold in between two layers of tungsten and gold. These 64 triangular pinholes and six penumbra apertures provide a matrix image that can be reconstructed to image complex deuterium-tritium neutron burn details in laser fusion capsules. The gold layers were diamond turned flat before the profiles were cut into their faces. Four of the layers were profiled with penumbral profile arrays that tapered from a radius of 250 to 150 µm. Three gold layers were just diamond turned to wedges to set the tilt of the whole aperture. Three gold layers were profiled on both sides with triangle groove arrays that consist of eight equilateral triangles with the depth of 200 to 15 µm over the 200-mm length, with a tolerance of 2 µm. Custom software programming routines were written using Labview to move the diamond-turning profiler through the required X-Y-Z movements to cut the penumbral and grooved profiles of the pinhole into the varying tilted arrays of features. The software is optimized to push the profile of the whole part into the face while eliminating any unneeded passes that do not cut any material. Each layer was thoroughly inspected on both sides using an optical coordinate measuring machine and white-light interferometer to validate each of the profiles. The pinhole assembly was inspected on a rotary stage so that both ends of the assembly can be inspected and presented in a single point cloud. The process of machining, programming, assembly, and inspection of the neutron imaging pinhole is covered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Improved Glow Discharge Polymer Removal from Beryllium Capsules Using Ozone

Copper-doped beryllium spheres are an attractive ablator for inertial confinement fusion experiments. Beryllium spheres are made by sputtering beryllium onto spherical plastic mandrels which must then be removed through a hole that is laser drilled through the shell wall. The currently used mandrel material is glow discharge polymer. This material cannot be removed by solvent and must be “burned” out. The burnout process was originally performed by etching with dry air at 425°C, but this process can substantially roughen the inner surface, which can seed instabilities and increase mix during implosion experiments. In this paper, we explore the use of pure oxygen and ozone to reduce process temperature and improve inner and outer surface quality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Systematic Source Determination and X-Ray Radiography Detection of Nonuniformities on High-Density Carbon Ablators

Recent deuterium-tritium (D-T)–layered implosion experiments at the National Ignition Facility have achieved a burning plasma and >1-MJ neutron yield. A series of repeat experiments have shown that the degree of performance is very likely dependent on capsule quality, including the quantity of what are collectively termed “high- Z particles.” These particles are detected on a custom-built radiography system, known as the Sagometer, during the final target qualification process. The term particles is misleading, as the source of these nonuniformities in the capsule images is uncertain; the term detection will be used instead. An increased number of D-T targets have been rejected at the final stages of production due to Sagometer detections. Late detections are deleterious in terms of loss of production parts, effort, and overall operating efficiency. In response, we undertook an effort to determine the origin of these detections and to ultimately mitigate target losses caused by them. Through careful testing and analysis, we have determined neither insufficient production cleanliness nor hohlraum shedding is responsible for the detections on the capsule. Here, we determined that the detections are inherent to the capsule and have made efforts to use the Zeiss Xradia to identify them earlier in the production process. While testing revealed the Xradia is not currently sufficient for identifying such particles using radiography images, we continue to look to other forms of metrology to down select the capsules early in the process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Los Alamos National Laboratory Double Shell Program Target Development

The Double Shell Program at Los Alamos National Laboratory is studying an alternative platform for achieving robust alpha-particle heating at the National Ignition Facility. Double shells benefit from having a low convergence ratio and lower predicted temperature for achieving volume ignition. The joint required to assemble a double shell has an imperfection in the outer shell that seeds instabilities that can greatly impact the inner capsule’s implosion at bang time. Furthermore, different variations of the shape and placement of the joint were implemented with improvements in the quality of the machining leading to measurable improvements in yield. High-Z coatings on the outer joint mitigated the impact of the 1- to 2-μm gap sometimes found in double shell assemblies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Vibration-Damping Properties of 3D-Printed Auxetic Structures

Two-photon polymerization is a recently developed technique that is used to print millimeter-size cellular structures with micrometer resolution. The two-photon polymerization process discussed in this paper is used to build structures to stabilize direct-drive targets that are imploded at cryogenic temperatures. These targets are supported by a very thin stalk (10 to 18 µm diameter) that can be broken (or dislodged) by vibrations that occur when the target is transported or when the cryogenic shroud is removed. And any vibration at the moment of implosion affects how precisely the target is aligned to the focus of the laser beams. Finally, this study investigates the mechanical properties of different millimeter-sized cellular auxetic structures (~0.2 g/cm 3 ) at room and cryogenic temperatures (20°C and −140°C) and how well the most promising structure dampens vibrations at room temperature.

auxetic structures↗