Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Growth, structural and optoelectronic properties tuning of nitrogen-doped ZnO thin films synthesized by means of reactive pulsed laser deposition

Highlights: • PLD technique has been used to elaborate N doped ZnO. • A maximum incorporation of 0.7 at.% has been achieved at a pressure of 25 mTorr. • Increasing the N{sub 2} pressure decreases the nitrogen content with the creation of more defects. • Optical transmission and PL spectra have confirmed the band gap narrowing. - Abstract: Pulsed laser deposition has been successfully used to achieve in-situ nitrogen doping of zinc oxide thin films at a temperature as low as 300 °C. Nitrogen-doped zinc oxide (ZnO:N) thin films with a maximum nitrogen content of 0.7 at.% were obtained by varying the nitrogen background pressure in the range of 0–150 mTorr. The ZnO:N thin films were found to present hexagonal crystalline structure with dense and smooth surface. X-ray photoelectron spectroscopy analysis confirms the effective incorporation of nitrogen into ZnO thin films. Optical transmission together with room temperature photoluminescence measurements show that the band gap of the ZnO:N films shifts from 3.3 eV to 3.1 eV as nitrogen concentration varies in the range of 0.2–0.7 at.%. The narrower band gap is obtained at an optimal nitrogen concentration of 0.22 at.%. This band gap narrowing is found to be caused by both nitrogen incorporation and nitrogen-induced defects in the ZnO:N films.

36 MATERIALS SCIENCE↗

Band offset between cubic GaN and AlN from intra- and interband spectroscopy of superlattices

By the analysis of intra- and intersubband transitions in GaN/AlN superlattices the band offset is determined experimentally. Superlattice structures with different period lengths were fabricated by plasma-assisted molecular beam epitaxy 3C-SiC substrates. The structural properties were studied by high resolution X-ray diffraction, revealing a high structural perfection of the superlattice region with several peaks in the X-ray spectra. Infrared absorbance spectroscopy revealed clear intrasubband transitions in the spectral region of 1.55 {mu}m measured at room temperature. Clear intersubband transitions were observed by photoluminescence at room temperature. These transition energies were compared to calculated energies using a 1D Poisson Schroedinger solver. For the calculations standard parameters for cubic GaN and AlN were used, while the band offset between GaN and AlN was varied. Optimal agreement between experimental and theoretical data was obtained for a band offset {Delta}E{sub C}:{Delta} E{sub V} of 55:45.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quasiparticle band structures and thermoelectric transport properties of p-type SnSe

We used density functional and many-body perturbation theory to calculate the quasiparticle band structures and electronic transport parameters of p-type SnSe both for the low-temperature Pnma and high-temperature Cmcm phases. The Pnma phase has an indirect band gap of 0.829 eV, while the Cmcm has a direct band gap of 0.464 eV. Both phases exhibit multiple local band extrema within an energy range comparable to the thermal energy of carriers from the global extrema. We calculated the electronic transport coefficients as a function of doping concentration and temperature for single-crystal and polycrystalline materials to understand the previous experimental measurements. The electronic transport coefficients are highly anisotropic and are strongly affected by bipolar transport effects at high temperature. Our results indicate that SnSe exhibits optimal thermoelectric performance at high temperature when doped in the 10{sup 19}–10{sup 20 }cm{sup −3} range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-efficiency AlGaInP solar cells grown by molecular beam epitaxy

AlGaInP is an ideal material for ultra-high efficiency, lattice-matched multi-junction solar cells grown by molecular beam epitaxy (MBE) because it can be grown lattice-matched to GaAs with a wide 1.9–2.2 eV bandgap. Despite this potential, AlGaInP grown by molecular beam epitaxy (MBE) has yet to be fully explored, with the initial 2.0 eV devices suffering from poor performance due to low minority carrier diffusion lengths in both the emitter and base regions of the solar cell. In this work, we show that implementing an AlGaInP graded layer to introduce a drift field near the front surface of the device enabled greatly improved internal quantum efficiency (IQE) across all wavelengths. In addition, optimizing growth conditions and post-growth annealing improved the long-wavelength IQE and the open-circuit voltage of the cells, corresponding to a 3× increase in diffusion length in the base. Taken together, this work demonstrates greatly improved IQE, attaining peak values of 95%, combined with an uncoated AM1.5G efficiency of 10.9%, double that of previously reported MBE-grown devices.

Faucher, J.↗

Synthesis, structural characterization, and DFT calculations of 3-buthyl-4-(3-methyl-3-mesitylcyclobut-1-yl)-1,3-thiazole-2(3H)-thione

The title compound, C{sub 21}H{sub 29}NS{sub 2}, has been synthesized and its crystal structure has been determined from single crystal X-ray diffraction data. Crystals are monoclinic, a = 11.4923(8), b = 13.1842(7), c = 14.6583(8) Å, β = 109.983(6)°, sp. gr. P2{sub 1}/c, Z = 4. Mesityl and thiazole groups are in cis positions with respect to the cyclobutane ring. The cyclobutane ring is puckered, with a dihedral angle of 26.6(2)° between the two three-atom planes. The crystal structure involves one weak intermolecular C–H···S hydrogen-bond. The molecular geometry was also optimized using density functional theory (DFT/B3LYP) method with the 6-311G(d, p) basis set in ground state. Geometric parameters (bond lengths, bond angles and torsion angles) and vibrational assignments have been calculated theoretically and compared with the experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Toward the Stable and Reversible Lattice Oxygen Redox in Li-Rich Layered Oxides

Conventional wisdom on utilizing cation redox in intercalation materials for energy storage has been challenged by a new class of cathode materials where oxygen anions actively participate in the reversible electrochemical reaction. This type of Li-rich layered oxides (LRLO) have captured great interests in the field of energy storage materials as they are considered as one of the most promising cathode materials for future high energy density lithium-ion and lithium metal batteries. However, the activation of solid-state oxygen redox reaction usually causes some detrimental effects on the electrochemical performance (e.g., O 2 loss, voltage fade) preventing the practical application of LRLO (Y. S. Meng et al., Nature Energy, 2018, 3, 641-647; X. Yu et al., Nature Energy, 2018, 3, 690-698). Till now, the charge-compensation mechanism associated with oxygen reduction/oxidation is still under fierce debate. For instance, J.M. Tarascon et al. proposed the presence of peroxo-like species (O 2 n- , O-O: 2.45 Å) in lattice oxygen redox based on the research results of 4d/5d-TM LRLO (Science, 2015, 350, 1516-1521; Nature Materials, 2017, 16, 580-586). In contrast, P. Bruce et al. clearly demonstrated that there is no peroxide species formed in 3d-TM LRLO (Nature Chemistry, 2016, 8, 684-691). The controversial viewpoints regarding oxygen reduction/oxidation at solid state may be originated from the intrinsic complexity of this class of materials and the limitations of the characterization techniques. Our work reveals the origin of stable and reversible lattice oxygen redox in 3d TM LRLO, specifically, the localized structure distortion (i.e., short O-O pairs) accompanying the oxygen redox is favorable for the stability of the average layered lattice structure, maintaining the high-voltage character and topotactic structure-reversibility of LRLO. With a model compound (Li 1.2 Mn 0.54 Co 0.13 Ni 0.13 O 2 ), we for the first time observe a local occurrence of short O-O pair (~2.39 Å) concomitant with the lattice oxygen redox via neutron pair distribution function. It was found that the distance of this short O-O pair is very similar to that of O-O dimer in peroxo-like species, but our quantum mechanical calculation results suggest that the bonding nature of this short O-O pair (in which potential π-type overlap dominated) is quite different from that of peroxo-like O-O dimer (in which σ-type bond formed). Based on these understandings in our work, an optimization guidance for LRLO is unambiguously presented: designing a robust layered structure with high-covalency TMs while constructing a flexible local structure (e.g., honeycomb structure) with high-ionicity TMs to accommodate the local distortion induced by oxygen redox, thus achieving the reversible high energy density in LRLO.

Zhang, Minghao↗

Magnetism, half-metallicity and electrical transport properties of V- and Cr-doped semiconductor SnTe: A theoretical study

This work presents results for the electronic structure, magnetic properties, and electrical resistivity of the semiconductor SnTe doped with 3d transition metals V and Cr. From the standpoint of potential application in spintronics, we look for half-metallic states and analyze their properties in both rock salt and zinc blende structures using ab initio electronic structure methods. In both cases, it is the Sn-sublattice that is doped with the transition metals, as has been the case with experiments performed so far. We find four half-metallic compounds at their optimized cell volumes. Results of exchange interactions and the Curie temperature are presented and analyzed for all the relevant cases. Resistivity calculation based on Kubo-Greenwood formalism shows that the resistivities of these alloys due to transition metal doping of the Sn-sublattice may vary, in most cases, from typical liquid metal or metallic glass value to 2–3 times higher. 25% V-doping of the Sn-sublattice in the rock salt structure gives a very high resistivity, which can be traced to high values of the lattice parameter resulting in drastically reduced hopping or diffusivity of the states at the Fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic Aperture and Tolerances for PEP-X Ultimate Storage Ring Design

A lattice for the PEP-X ultimate storage ring light source, having 11 pm-rad natural emittance at a beam energy of 4.5 GeV at zero current, using 90 m of damping wiggler and fitting into the existing 2.2-km PEP-II tunnel, has been recently designed. Such a low emittance lattice requires very strong sextupoles for chromaticity correction, which in turn introduce strong non-linear field effects that limit the beam dynamic aperture. In order to maximize the dynamic aperture we choose the cell phases to cancel the third and fourth order geometric resonances in each 8-cell arc. Four families of chromatic sextupoles and six families of geometric (or harmonic) sextupoles are added to correct the chromatic and amplitude-dependent tunes. To find the best settings of the ten sextupole families, we use a Multi-Objective Genetic Optimizer employing elegant to optimize the beam lifetime and dynamic aperture simultaneously. Then we evaluate dynamic aperture reduction caused by magnetic field multipole errors, magnet fabrication errors and misalignments. A sufficient dynamic aperture is obtained for injection, as well as workable beam lifetime.

43 PARTICLE ACCELERATORS↗

Demonstration of MgCr 2– x Mn x O 4 Spinel Oxide Cathodes in High-Voltage Mg Batteries

Solid-solution oxide spinels with high redox voltages and facile Mg 2+ mobility have been identified as promising candidates for practical, high-voltage cathodes in Mg batteries. In this work, we discuss the development of MgCr 2-x Mn x O 4 [x = 0.5, 1, 1.2] solid-solution spinel oxides as a cathode material and their electrochemical performance paired with an Mg anode in a full cell. This work presents the first demonstration of full cells with these materials. Mg-Cr-Mn spinel oxides with varying Cr and Mn contents were synthesized using alternative synthetic routes for optimal electrochemical performance. High-resolution synchrotron powder X-ray diffraction (PXRD), solid-state nuclear magnetic resonance (NMR) spectroscopy, and electron microscopy showed that these different synthetic routes resulted in changes in structures and particle morphologies, which in turn affect the electrochemical performance. Particularly, the urea coprecipitation synthetic route resulted in high-surface-area particles that enabled lower overpotentials and increased discharge capacity. The high surface area also resulted in expedited structural degradation caused by the irreversible migration of Mg 2+ into normally vacant 16c sites in the spinel lattice. This structural degradation was lessened by using a hydrosauna-urea synthesis method, which decreased the Mg/Mn inversion ratio while retaining high-surface-area particles with good cycling performance. Furthermore, our findings highlight the necessity for high surface area or nanostructured spinel oxide cathodes with minimized Mg-Mn inversion to enable spinel oxide cathodes in Mg full cells.

Mg anode↗

Plastic strain arrangement in copper single crystals in sliding

Deformation of tribologically loaded contact zone is one of the wear mechanisms in spite of the fact that no mass loss may occur during this process. Generation of optimal crystallographic orientations of the grains in a polycrystalline materials (texturing) may cause hardening and reducing the deformation wear. To reveal the orientation dependence of an individual gain and simplify the task we use copper single crystals with the orientations of the compression axis along [111] and [110]. The plastic deformation was investigated by means of optical, scanning electron microscopy and EBSD techniques. It was established that at least four different zones were generated in the course of sliding test, such as non-deformed base metal, plastic deformation layer sliding, crystalline lattice reorientation layer and subsurface grain structure layer. The maximum plastic strain penetration depth was observed on [110]-single crystals. The minimum stability of [111]-crystals with respect to rotation deformation mode as well as activation of shear in the sliding contact plane provide for rotation deformation localization below the worn surface. The high-rate accumulation of misorientations and less strain penetration depth was observed on [111]-crystals as compared to those of [110]-oriented ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Morphological evolution of Ag2Te precipitates in thermoelectric PbTe.

Nanostructuring of thermoelectric materials is expected to enhance thermoelectric properties by reducing the thermal conductivity and improving the power factor from that of homogeneous bulk materials. In multiphase, nanostructured thermoelectric materials, an understanding of precipitation mechanisms and phase stability is crucial for engineering systems with optimal thermoelectric performance. In this presentation we will discuss our investigations of the morphological evolution, orientation relationship, and composition of Ag{sub 2}Te precipitates in PbTe using transmission electron microscopy (TEM) and atom probe tomography (APT). Annealing in the region of two phase equilibrium between Ag{sub 2}Te and PbTe results in the formation of monoclinic {beta}-Ag{sub 2}Te precipitates as determined by x-ray and electron diffraction studies. These precipitates are aligned to the PbTe matrix with an orientation relationship that aligns the Te sub-lattices in the monoclinic and rock salt structures. This relationship is the same as we have reported earlier for {beta}-Ag{sub 2}Te precipitates in rocksalt AgSbTe{sub 2}. Observations using TEM and APT suggest that the Ag{sub 2}Te precipitates initially form as coherent spherical precipitates which upon coarsening evolve into flattened semi-coherent disks along the <100>PbTe directions which is consistent with theoretical predictions for elastically strained precipitates in a matrix. Our HRTEM observations show that sufficiently small precipitates are coherently embedded, while larger precipitates exhibit misfit dislocations and multiple monoclinic variants to relieve the elastic strain. Analysis of the composition of both precipitate groups using APT indicates that the larger precipitates exhibit compositions close to equilibrium while the smaller nanoscale precipitates exhibit enhanced Pb compositions. This detailed analysis of the orientation relationship, morphology, composition, and coarsening behavior of embedded Ag{sub 2}Te precipitates may be helpful in understanding the precipitation mechanisms and microstructure of related thermoelectric materials, such as LAST.

36 MATERIALS SCIENCE↗

Solving Critical Problems of the Muon Collider Higgs Factory: Optics, Magnets and their Protection, Detector Backgrounds

A low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting magnets of the HF collider ring. This imposes significant challenges to superconducting (SC) magnets used in the MC storage ring (SR) and interaction regions (IR). Magnet designs are proposed which provide high operating gradient and magnetic field in a large aperture to accommodate the large size of muon beams (due to low beta*), as well as a cooling system to intercept the large heat deposition from the showers induced by decay electrons. The distribution of heat deposition in the MC SR lattice elements requires large-aperture magnets in order to accommodate thick high-Z absorbers to protect the SC coils. Based on the developed MARS15 model and intensive simulations, a sophisticated radiation protection system was designed for the collider SR and IR to bring the peak power density in the superconducting coils below the quench limit and reduce the dynamic heat deposition in the cold mass by a factor of 100. The system consists of tight tungsten masks in the magnet interconnect regions and elliptical tungsten liners in the magnet aperture optimized individually for each magnet. These also reduce the background particle fluxes in the collider detector.

43 PARTICLE ACCELERATORS↗

Al-doped TiO{sub 2} mesoporous material supported Pd with enhanced catalytic activity for complete oxidation of ethanol

Pd catalysts supported on Al-doped TiO{sub 2} mesoporous materials were evaluated in complete oxidation of ethanol. The catalysts synthesized by wet impregnation based on evaporation-induced self-assembly were characterized by X-ray diffraction, measurement of pore structure, XPS, FT-IR, temperature programmed reduction and TEM. Characteristic results showed that the aluminium was doped into the lattice of mesoporous anatase TiO{sub 2} to form Al-O-Ti defect structure. Catalytic results revealed that Al-doped catalysts were much more active than the pristine one, especially at low temperature (≤200 °C). This should be ascribed to the introduction of aluminium ions that suppressed the strong metal-support interaction and increased the active sites of Pd oxides, enhanced the stabilized anatase TiO{sub 2}, improved well dispersed high valence palladium species with high reducibility and enriched chemisorption oxygen. - Graphical abstract: Al-doped Pd/TiO{sub 2} exhibited optimal catalytic performance for ethanol oxidation and CO{sub 2} yield by the suppression of SMSI. - Highlights: • Palladium catalysts supported on Al-doped TiO{sub 2} mesoporous materials were studied. • The introduction of Al can enhance anatase stabilization and increase defect TiO{sub 2}. • The Pd/Al-TiO{sub 2} catalysts show higher ethanol conversion and CO{sub 2} yield than Pd/TiO{sub 2}. • The influence of Al on SMSI and catalytic performance were evaluated by TPR and XPS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Platinum–nickel nanowire catalysts with composition-tunable alloying and faceting for the oxygen reduction reaction

The ability to tune the alloying properties and faceting characteristics of bimetallic nanocatalysts is essential for designing catalysts with enhanced activity and stability through optimizing strain and ligand effects, which is an important frontier for designing advanced materials as catalysts for fuel cell applications. This report describes composition-controlled alloying and faceting of platinum–nickel nanowires (PtNi NWs) for the electrocatalytic oxygen reduction reaction. The PtNi NWs are synthesized by a surfactant-free method and are shown to display bundled morphologies of nano-tetrahedra or nanowires, featuring an ultrathin and irregular helix morphology with composition-tunable facets. Using high-energy synchrotron X-ray diffraction coupled with atomic pair distribution function analysis, lattice expansion and shrinking are revealed, with the Pt : Ni ratio of ~3 : 2 exhibiting a clear expansion, which coincides with the maximum electrocatalytic activity for the ORR. In comparison with PtNi nanoparticles (NPs), the PtNi NWs display remarkably higher electrocatalytic activity and stability as a result of the composition dependent atomic-scale alloying and faceting, demonstrating a new pathway to the design of alloy nanocatalysts with enhanced activity and durability for fuel cells.

36 MATERIALS SCIENCE↗

Evolving morphotropic phase boundary in lead-free (Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-BaTiO{sub 3} piezoceramics

The correlation between structure and electrical properties of lead-free (1-x)(Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-xBaTiO{sub 3} (BNT-100xBT) polycrystalline piezoceramics was investigated systematically by in situ synchrotron diffraction technique, combined with electrical property characterization. It was found that the morphotropic phase boundary (MPB) between a rhombohedral and a tetragonal phase evolved into a morphotropic phase region with electric field. In the unpoled material, the MPB was positioned at the transition from space group R3m to P4mm (BNT-11BT) with optimized permittivity throughout a broad single-phase R3m composition regime. Upon poling, a range of compositions from BNT-6BT to BNT-11BT became two-phase mixture, and maximum piezoelectric coefficient was observed in BNT-7BT. It was shown that optimized electrical properties are related primarily to the capacity for domain texturing and not to phase coexistence.

36 MATERIALS SCIENCE↗

Studies of Novel Quantum Phenomena in Ruthenates

Strongly correlated oxides have been the subject of intense study in contemporary condensed matter physics, and perovskite ruthenates (Sr,Ca)n+1RunO3n+1 have become a new focus in this field. One of important characteristics of ruthenates is that both lattice and orbital degrees of freedom are active and are strongly coupled to charge and spin degrees of freedom. Such a complex interplay of multiple degrees of freedom causes the properties of ruthenates to exhibit a gigantic response to external stimuli under certain circumstances. Magnetic field, pressure, and chemical composition all have been demonstrated to be effective in inducing electronic/magnetic phase transitions in ruthenates. Therefore, ruthenates are ideal candidates for searching for novel quantum phenomena through controlling external parameters. The objective of this project is to search for novel quantum phenomena in ruthenate materials using high-quality single crystals grown by the floating-zone technique, and investigate the underlying physics. The following summarizes our accomplishments. We have focused on trilayered Sr4Ru3O10 and bilayered (Ca1-xSrx)3Ru2O7. We have succeeded in growing high-quality single crystals of these materials using the floating-zone technique and performed systematic studies on their electronic and magnetic properties through a variety of measurements, including resistivity, Hall coefficient, angle-resolved magnetoresistivity, Hall probe microscopy, and specific heat. We have also studied microscopic magnetic properties for some of these materials using neutron scattering in collaboration with Los Alamos National Laboratory. We have observed a number of unusual exotic quantum phenomena through these studies, such as an orbital selective metamagnetic transition, bulk spin valve effect, and a heavy-mass nearly ferromagnetic state with a surprisingly large Wilson ratio. Our work has also revealed underlying physics of these exotic phenomena. Exotic phenomena of correlated electron has been among central topics of contempary condensed matter physics. Ultrfast phase transitions accompanied by switching of conductivity or magnetization in stronly correlated materials are believed to be promising in developing next generation of transistors. Our work on layered ruthenates has remarkably advanced our understanding of how the exotic phenomena of correlated electrons is governed by the complex interplay between charge, spin, lattice and orbital degrees of freedom. In addition to studies on ruthenates, we have also expanded our research to the emerging field of Fe-based superconductors, focusing on the iron chalcogenide Fe1+y(Te1-xSex) superconductor system. We first studied the superconductivity of this alloy system following the discovery of superconductivity in FeSe using polycrystalline samples. Later, we successfuly grew high-quality single crystals of these materials. Using these single crystals, we have determined the magnetic structure of the parent compound Fe1+yTe, observed spin resonance of superconducting state in optimally doped samples, and established a phase diagram. Our work has produced an important impact in this burgeoning field. The PI presented an invited talk on this topic at APS March meeting in 2010. We have published 19 papers in these two areas (one in Nature materials, five in Physical Review Letters, and nine in Physical Review B) and submitted two (see the list of publications attached below).

36 MATERIALS SCIENCE↗

Graph Contractions for Calculating Correlation Functions in Lattice QCD

Computing correlation functions for many-particle systems in Lattice QCD is vital to extract nuclear physics observables like the energy spectrum of hadrons such as protons. However, this type of calculation has long been considered to be very challenging and computing-resource intensive because of the complex nature of a hadron composed of quarks with many degrees of freedom. In particular, a correlation function can be calculated through a sum of all possible pairs of quark contractions, each of which is a batched tensor contraction, dictated by Wick's theorem. Because the number of terms of this sum can be very large for any hadronic system of interest, fast evaluation of the sum faces several challenges: an extremely large number of contractions, a huge memory footprint at runtime, and the speed of tensor contractions. In this paper, we present a Lattice QCD analysis software suite, Redstar, which addresses these challenges by utilizing novel algorithmic and software engineering methods targeting modern computing platforms such as many-core CPUs and GPUs. In particular, Redstar represents every term in the sum of a correlation function by a graph, applies efficient graph algorithms to reduce the number of contractions to lower the cost of computations, and minimizes the total memory footprint. Moreover, Redstar carries out the contractions on either CPUs or GPUs utilizing an internal and highly efficient Hadron contraction library. Specifically, we illustrate some important algorithmic optimizations of Redstar, show various key design features of Hadron library, and present the speedup values due to the optimizations along with performance figures for calculating six correlations functions on four computing platforms.

Chen, Jie↗

Analysis of Crystal Lattice Deformation by Ion Channeling

A model of dislocations has been developed for the use in Monte Carlo simulations of ion channeling spectra obtained for defected crystals. High resolution transmission electron microscopy micrographs show that the dominant type of defects in the majority of ion irradiated crystals are dislocations. The RBS/channeling spectrum is then composed of two components: one is due to direct scattering on randomly displaced atoms and the second one is related to beam defocussing on dislocations, which produce predominantly crystal lattice distortions, i.e. bent channels. In order to provide a correct analysis of backscattering spectra for the crystals containing dislocations we have modified the existing Monte Carlo simulation code "McChasy". A new version of the code has been developed by implementing dislocations on the basis of the Peierls-Nabarro model. Parameters of the model have been determined from the high resolution transmission electron microscopy data. The newly developed method has been used to study the Ar-ion bombarded SrTiO3 samples. The best fit to the Rutherford backscattering/channeling spectra has been obtained by optimizing the linear combination of two kinds of defects: displaced atoms and bent channels. The great virtue of the Monte Carlo simulation is that unlike a traditional dechanneling analysis it allows quantitative analysis of crystals containing a mixture of different types of defects.

Environmental Molecular Sciences Laboratory↗