Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Efficient magnetic fields for supporting toroidal plasmas

The magnetic field that supports tokamak and stellarator plasmas must be produced by coils well separated from the plasma. However, the larger the separation, the more difficult it is to produce a given magnetic field in the plasma region, so plasma configurations should be chosen that can be supported as efficiently as possible by distant coils. The efficiency of an externally generated magnetic field is a measure of the field's shaping component magnitude at the plasma compared to the magnitude near the coils; the efficiency of a plasma equilibrium can be measured using the efficiency of the required external shaping field. Counterintuitively, plasma shapes with low curvature and spectral width may have low efficiency, whereas plasma shapes with sharp edges may have high efficiency. Two precise measures of magnetic field efficiency, which correctly identify such differences in difficulty, will be examined. These measures, which can be expressed as matrices, relate the externally produced normal magnetic field on the plasma surface to the either the normal field or current on a distant control surface. A singular value decomposition (SVD) of either matrix yields an efficiency ordered basis for the magnetic field distributions. Calculations are carried out for both tokamak and stellarator cases. For axisymmetric surfaces with circular cross-section, the SVD is calculated analytically, and the range of poloidal and toroidal mode numbers that can be controlled to a given desired level is determined. If formulated properly, these efficiency measures are independent of the coordinates used to parameterize the surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parallel momentum input by tangential neutral beam injections in stellarator and heliotron plasmas

The configuration dependence of parallel momentum inputs to target plasma particle species by tangentially injected neutral beams is investigated in non-axisymmetric stellarator/heliotron model magnetic fields by assuming the existence of magnetic flux-surfaces. In parallel friction integrals of the full Rosenbluth-MacDonald-Judd collision operator in thermal particles' kinetic equations, numerically obtained eigenfunctions are used for excluding trapped fast ions that cannot contribute to the friction integrals. It is found that the momentum inputs to thermal ions strongly depend on magnetic field strength modulations on the flux-surfaces, while the input to electrons is insensitive to the modulation. In future plasma flow studies requiring flow calculations of all particle species in more general non-symmetric toroidal configurations, the eigenfunction method investigated here will be useful.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DECREASING SUNSPOT MAGNETIC FIELDS EXPLAIN UNIQUE 10.7 cm RADIO FLUX

Infrared spectral observations of sunspots from 1998 to 2011 have shown that on average sunspots changed, the magnetic fields weakened, and the temperatures rose. The data also show that sunspots or dark pores can only form at the solar surface if the magnetic field strength exceeds about 1500 G. Sunspots appear at the solar surface with a variety of field strengths, and during the period from 1998 to 2002 a histogram of the sunspot magnetic fields shows a normal distribution with a mean of 2436 {+-} 26 G and a width of 323 {+-} 20 G. During this observing period the mean of the magnetic field distribution decreased by 46 {+-} 6 G per year, and we assume that as the 1500 G threshold was approached, magnetic fields appeared at the solar surface which could not form dark sunspots or pores. With this assumption we propose a quantity called the sunspot formation fraction and give an analytical form derived from the magnetic field distribution. We show that this fraction can quantitatively explain the changing relationship between sunspot number and solar radio flux measured at 10.7 cm wavelengths.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of a Traveling Wave Superconducting Accelerating Structure

The primary goal of Phase I is a baseline conceptual design of a STWA structure. Work includes simulation and optimization of a L-band Superconducting TWA cavity with respect to magnetic and electrical surface field rations, inter-cell coupling coefficients, and accelerating field flatness. The primary goal of Phase I is a baseline conceptual design of a STWA structure. Work includes simulation and optimization of a L-band Superconducting TWA cavity with respect to magnetic and electrical surface field rations, inter-cell coupling coefficients, and accelerating field flatness. The main objective of the Phase II project is to perform a proof-of-principle experiment to demonstrate the feasibility of the SC traveling wave accelerating (STWA) structure

43 PARTICLE ACCELERATORS↗

Electrical explosion of metals in fast-rising megagauss magnetic fields

A criterion for the surface explosion of metal conductors in strong magnetic fields with the magnetic induction rising at rates over 4x10{sup 13} G/s has been obtained for a current skinning mode: the explosion occurs as the magnetic energy density at the metal surface becomes as high as a factor of 1.5-2 of the sublimation energy density for the metal under normal conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Signature of the Lunar South Pole-Aitken Basin: Character, Origin, and Age

A new magnetic map of the Moon, based on Lunar Prospector (LP) magnetometer observations, sheds light on the origin of the South Pole-Aitken Basin (SPA), the largest and oldest of the recognized lunar basins. A set of WNW-trending linear to arcuate magnetic features, evident in both the radial and scalar observations, covers much of a 1000 km wide region centered on the NW portion of SPA. The source bodies are not at the surface because the magnetic features show no first-order correspondence to any surface topographic or structural feature. Patchy mare basalts of possible late Imbrianage are emplaced within SPA and are inferred to have been emplaced through dikes, directly from mantle sources. We infer that the magnetic features represent dike swarms that served as feeders for these mare basalts, as evident from the location of the Thomson/ Mare Ingenii, Van de Graaff, and Leeuwenhoek mare basalts on the two largest magnetic features in the region. Modeling suggests that the dike zone is between 25 and 50 km wide at the surface, and dike magnetization contrasts are in the range of 0.2 A/m. We theorize that the basaltic dikes were emplaced in the lunar crust when a long-lived dynamo was active. Based on pressure, temperature, and stress conditions prevalent in the lunar crust, dikes are expected to be a dominantly subsurface phenomenon, consistent with the observations reported here.

South Pole-Aitken↗

The properties of the extraordinary mode and surface plasmon modes in the three-dimensional magnetized plasma photonic crystals based on the magneto-optical Voigt effects

In this paper, the properties of the extraordinary mode and surface plasmon modes in the three-dimensional (3D) magnetized plasma photonic crystals (MPPCs) with face-centered-cubic lattices that are composed of the core tellurium (Te) spheres with surrounded by the homogeneous magnetized plasma shells inserted in the air, are theoretically investigated in detail by the plane wave expansion method, as the magneto-optical Voigt effects of magnetized plasma are considered (the incidence electromagnetic wave vector is perpendicular to the external magnetic field at any time). The optical switching or wavelength division multiplexer can be realized by the proposed 3D MPPCs. Our analyses demonstrate that the complete photonic band gaps (PBGs) and two flatbands regions for the extraordinary mode can be observed obviously. PBGs can be tuned by the radius of core Te sphere, the plasma density and the external magnetic field. The flatbands regions are determined by the existence of surface plasmon modes. Numerical simulations also show that if the thickness of magnetized plasma shell is larger than a threshold value, the band structures of the extraordinary mode will be similar to those obtained from the same structure containing the pure magnetized plasma spheres. In this case, the band structures also will not be affected by the inserted core spheres. It is also provided that the upper edges of two flatbands regions will not depend on the topology of lattice. However, the frequencies of lower edges of two flatbands regions will be convergent to the different constants for different lattices, as the thickness of magnetized plasma shell is close to zero.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fermi Surface Nesting Driving the RKKY Interaction in the Centrosymmetric Skyrmion Magnet Gd 2 PdSi 3

The magnetic skyrmions generated in a centrosymmetric crystal were recently first discovered in Gd 2 PdSi 3 . In light of this, we observe the electronic structure by angle-resolved photoemission spectroscopy (ARPES) and unveil its direct relationship with the magnetism in this compound. The Fermi surface and band dispersions are demonstrated to have a good agreement with the density functional theory (DFT) calculations carried out with careful consideration of the crystal superstructure. Most importantly, we find that the three-dimensional Fermi surface has extended nesting which matches well the q vector of the magnetic order detected by recent scattering measurements. Finally, the consistency we find among ARPES, DFT, and the scattering measurements suggests the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction involving itinerant electrons to be the formation mechanism of skyrmions in Gd 2 PdSi 3 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Force-free fields in thin coronal loops

We solve the force-free equation J x B = 0 for fields which are toroidally symmetric. The technique utilizes an expansion about a cylindrical field and is therefore valid or tori with a large aspect ratio such as long, thin, coronal loops. The calculation is performed in spatial toroidal coordinates, rather than in the flux coordinates used by previous authors; this allows direct calculation of the loci of flux surfaces and of surfaces of constant magnetic pressure. Our solutions differ significantly from toroidal fields in laboratories, which are in general not force-free. They are characterized by field lines whose projections in the poloidal planes are circles with centers displaced by varying distances from the axis of the torus. In general, flux surfaces do not correspond to surfaces of constant magnetic pressure. We have examined solutions corresponding to simple analytic zero-order cylindrical fields. For moderate twists in the zero-order (cylindrical) field, the magnetic pressure is larger on the inner toroidal radius. However, this effect diminishes with twist angle and in fact, for extreme initial twists, the magnetic pressure can be larger on the outer radius. We compare our results with previous work utilizing flux coordinates.

Emslie, A. Gordon↗

Observing the Surface Termination of LaScO 3 Perovskite Using Solid-State Nuclear Magnetic Resonance

Materials with well-defined surfaces are drawing increased attention for the design of bespoke catalysts and nanomaterials. Gaining a detailed understanding of the surfaces of these materials is an important challenge, which is often complicated by surface polymorphism and dynamic restructuring. We introduce the use of surface-enhanced NMR spectroscopy for the observation of such surfaces, focusing on LaScO 3 as an example. Here, we show that double-resonance NMR experiments correlating surface oxygen and probe molecules to the 139 La and 45 Sc nuclei at the surface reveal the material to be terminated by a ScO x monolayer. Surface-selective 17 O and 45 Sc NMR experiments further showed the material to be hydroxyl terminated and that the surface may be prone to dynamic restructuring as a result of moisture exposure. Perhaps most interestingly, surface-selective 139 La NMR experiments revealed the existence of previously undetected surface lanthanum defects, suggesting that surface-enhanced NMR may be useful as a guide in the synthesis of defect-free surfaces in the design of various nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced magnetic moments in Mn-doped FeCo clusters owing to ferromagnetic surface Mn atoms

Here, we provide an avenue to achieve optimized magnetic properties without relying on rare-earth elements. In particular, we focus on transition-metal nanoparticles with magnetic ordering that is rarely seen in bulk. By using first-principles real-space pseudopotential calculations, we show that Mn can exhibit ferromagnetic behavior similar to Fe when Mn is placed on the surface of a FeCo cluster. This ferromagnetic behavior of surface Mn is in sharp contrast with Mn bulk and Mn-based alloys, which are either antiferromagnetic or paramagnetic. The local magnetic moment carried by a surface Mn atom is larger than those of Fe and Co, leading to an increase of the total magnetic moment. We find that surface-Mn-induced magnetic enhancement is robust in ternary MnFeCo clusters with different sizes and various chemical compositions. Our theoretical findings provide a useful guide for designing new nanoparticles with a large magnetic moment.

36 MATERIALS SCIENCE↗

Novel method for effectively amplifying human peripheral blood T cells in vitro

The use of chimeric antigen receptor-modified T cells (CAR T cells) is an effective therapy for advanced cancer, especially hematological malignancies, and this method has attracted widespread attention in the last several years. The type, number and vitality of the effector cells clearly play important roles in this approach. In this study, to expand the possibility of curing cancer through adoptive cell therapy (ACT), we developed a novel method for effectively obtaining abundant T cells in vitro. The fusion proteins of three cytokines, SA-hIL-2, SA-hIL-7 and SA-hIL-21, were anchored onto biotin magnetic beads to increase the number of cytokines on the surface of the magnetic beads, which increased the local concentration of cytokines and thus promoted the binding of cytokines to T cells. Next, we examined the effects of these modified magnetic beads on the proliferation rate of T cells and CD19 CAR T cells. In this study, we report the expression and purification of the active bifunctional fusion proteins SA-hIL-2, SA-hIL-7 and SA-hIL-21, which were bound to biotin magnetic beads to develop a platform that was employed to increase the local concentration of cytokines. When the cells had been cultured for 14 days, the proliferation rate of the CD3{sup +} T cells in the group that received cytokine-coupled biotin magnetic beads (Beads-SA-CK) was higher than that of the cells in the groups that received soluble cytokines (Soluble-SA-CK) and that of the cells in the standard group (Standard-CK). We speculate that this difference may be the result of the increased expression of Bcl-2 and the increased phosphorylation of Stat5. Moreover, our results preliminarily indicate that compared with the other two treatments, Soluble-SA-CK and Standard-CK, adding cytokine-coupled biotin magnetic beads more effectively increases the proliferation rate of CD19 CAR-T cells. As expected, the CD19 CAR-T cells stimulated by Beads-SA-CK had a stronger anticancer effect than the cells stimulated by the other two treatments. An effective method of preparing abundant T cells in vitro was developed, and it may provide a novel strategy for ACT.

60 APPLIED LIFE SCIENCES↗

High-temperature and high-pressure NMR investigations of low viscous fluids confined in mesoporous systems

Abstract In this contribution, the relaxation and diffusional behaviors of low viscous fluids, water and methanol confined into mesoporous silica and controlled size pore glass were investigated. The engineered porous systems are relevant to geologically important subsurface energy materials. The engineered porous proxies were characterized by Brunauer–Emmett–Teller (BET) surface analyzer, nuclear magnetic resonance (NMR) spectroscopy, and electron microscopy (EM) to determine surface area, pore-wall protonation and morphology of these materials, respectively. The confined behavior of the low viscous fluids was studied by varying pore diameter, fluid-to-solid ratio, temperature, and pressure, and then compared to bulk liquid state. Both relaxation and diffusion behaviors for the confined fluids showed increasing deviation from pure bulk fluids as the fluid-to-solid ratio was decreased, and surface-to-volume ratio ( S / V ) was varied. Variable pressure deuteron NMR relaxation of confined D 2 O and confined methanol, deuterated at the hydroxyl or methyl positions, were performed to exploit the sensitivity of the deuteron quadrupole moment to molecular rotation. The methanol results demonstrated greater pressure dependence than those for water only in bulk. The deviations from bulk liquid behavior arise from different reasons such as confinement and the interactions between confined fluid and the nano-pore wall. The results of the present report give insight into the behavior of low viscosity fluid in nano-confined geometries under different state conditions.

Chemistry↗

Magnetic shadowing of charged particles by an extended surface

The problem of particle shadowing by the lunar surface is examined. Shadow zones are obtained analytically for small-aperture detectors on an infinite flat surface and are shown to be in good agreement with those obtained by numerical trajectory tracing. The shadow zones cover about half of all possible external field orientations for a vertical detector, which may result in serious underestimations of the frequency of observation of a particular plasma region. Shadowing may cause wide variations between observed and actual pitch angle distributions even in the case of multiple- or large-aperture detectors. Since the particle flux can be considered approximately isotropic only for magnetic fields within 35 deg of the surface normal, the electron flux to the surface may be overestimated in current balance calculations ignoring the magnetic field direction. In addition, photoelectrons may be returned to the surface by the magnetic field.

Reiff, P. H.↗

Interplay of energy dissipation, ion-induced mixing, and crystal structure recovery, and surface effects in ion-irradiated magnetic Fe/Cr/Fe trilayers

The influence of the ion irradiation by 30 keV Ga{sup +} ions on the crystal structure, chemical ordering, magnetic properties, and topography of epitaxial Fe/Cr/Fe trilayers was investigated by different analytical techniques. We present direct experimental evidence, supported by theoretical estimates, that two processes take place concurrently due to the Ga-ion implantation. (i) A complete atom mixing of the Cr atoms within the Fe multilayers is occurring due to the collision cascades during the ballistic regime, and (ii) an essentially complete recovery of the initial single-crystal quality of the Fe multilayers by healing the melted and damaged area through the thermal spike phase occurs. Based on the experimental range distributions and theoretical modeling, channeling of Ga{sup +} ions in the experiments is found to contribute weakly to ion penetration and stopping, and the relative fraction of the well-channeled ions is marginally small. On the other hand, this weak channeling is sufficient to reduce the sputter yield by a factor of more than 5 in comparison with the sputtering of polycrystalline samples, evidence for the fact that the magnitude of channeling is not of primary importance for the sputtering. We offer an explanation for the observation of dramatic and abrupt changes in the surface roughness with increasing fluences in terms of a transformation from a single-phase single-crystal implanted region (bcc-Fe) to a mixture of the polycrystalline {alpha}-Fe-like bcc and {alpha}-Fe{sub 3}Ga structures within the outer half of the original Fe/Cr/Fe trilayer at fluences above 6.25 x 10{sup 16} ion/cm{sup 2}. The wall-like elevations appearing at the boundary of the irradiated areas were analyzed experimentally by varying the irradiation conditions. We showed that the wall size is governed by the ion-current density applied. A physical explanation for the appearance of such topographic features is presented, which would be valid for any material irradiated by a focused ion beam.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the relation between photospheric flow fields and the magnetic field distribution on the solar surface

Using the technique of local correlation tracking on a 28 minute time sequence of white-light images of solar granulation, the horizontal flow field on the solar surface is measured. The time series was obtained by the Solar Optical Universal Polarimeter (SOUP) on Spacelab 2 (Space Shuttle flight 51-F) and is free from atmospheric blurring and distortion. The SOUP flow fields have been compared with carefully aligned magnetograms taken over a nine hour period at the Big Bear Solar Observatory before, during, and after the SOUP images. The flow field and the magnetic field agree in considerable detail: vectors which define the flow of the white-light intensity pattern (granulation) point toward magnetic field regions, magnetic fields surround flow cells, and magnetic features move along the flow arrows. The projected locations of free particles ('corks') in the measured flow field congregate at the same locations where the magnetic field is observed.

Simon, George W.↗

Toroidal–Poloidal Magnetic Field Generation in Neutron Stars by Spacetime Frame-dragging

Neutron star magnetic fields, particularly in magnetars, have strong poloidal and toroidal components, reaching magnitudes up to 10{sup 15} T and extending into the magnetosphere, where they cause twisted magnetic fields and surface currents. Here, we show that to a large extent neutron star toroidal and poloidal magnetic fields are due to frame-dragging of spacetime in the stellar exterior. In the explicit case of linearized Kerr metric we show that general relativistic Maxwell equations admit a mixed poloidal and toroidal magnetic field configuration in which the toroidal field strength is comparable with the poloidal magnetic field. Calculations are performed to show that the frame-dragging-induced magnetic field has the observed order of magnitude at the stellar surface, and exhibits the flare-like phenomenon observed in magnetars.

79 ASTRONOMY AND ASTROPHYSICS↗

Spin-polarized scanning tunneling microscopy experiments on the rough surface of a polycrystalline NiFe film with a fine magnetic tip sensitive to a well-defined magnetization component

We developed a micrometer-sized magnetic tip integrated onto the write head of a hard disk drive for spin-polarized scanning tunneling microscopy (SP-STM) in the modulated tip magnetization mode. Using SP-STM, we measured a well-defined in-plane spin-component of the tunneling current of the rough surface of a polycrystalline NiFe film. The spin asymmetry of the NiFe film was about 1.3% within the bias voltage range of -3 to 1 V. We obtained the local spin component image of the sample surface, switching the magnetic field of the sample to reverse the sample magnetization during scanning. We also obtained a spin image of the rough surface of a polycrystalline NiFe film evaporated on the recording medium of a hard disk drive.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗