Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Role of indium in highly crystalline ZnO thin films

Zinc oxide and indium doped zinc oxide (ZnO:In) transparent conducting thin films were deposited on glass substrates by pulsed DC magnetron sputtering using separate Zn and In targets. The independent control of the In content in ZnO has helped us to explore the role of indium in influencing the oriented (002) growth, crystallinity, conductivity and mobility of the doped films. The lowest resistivity of ZnO:In thin film is 2.73 Multiplication-Sign 10{sup -3} ohm-cm. At the optimal condition of high (002) orientation, ZnO:In films with electrical resistivity of 7.63 Multiplication-Sign 10{sup -3} ohm.cm and mobility of 126.4 cm{sup 2}/V.s are achieved.

36 MATERIALS SCIENCE↗

The transition from amorphous to crystalline in Al/Zr multilayers

The amorphous-to-crystalline transition in Al(1.0%wtSi)/Zr and Al(Pure)/Zr multilayers grown by direct-current magnetron sputtering system has been characterized over a range of Al layer thicknesses (1.0-5.0 nm) by using a series of complementary measurements including grazing incidence X-ray reflectometry, atomic force microscopy, X-ray diffraction, and high-resolution transmission electron microscopy. The Al layer thickness transition exhibits the Si doped in Al could not only disfavor the crystallization of Al but also influence the changing trends of surface roughness and diffraction peak position of phase Al<111>. An interesting feature of the presence of Si in Al layer is that Si could influence the transition process in Al(1%wtSi) layer, in which the critical thickness (1.6 nm) of Al(Pure) layer in Al(Pure)/Zr shifts to 1.8 nm of Al(1.0%wtSi) layer in Al(1.0%wtSi)/Zr multilayer. We also found that the Zr-on-Al interlayer is wider than the Al-on-Zr interlayer in both systems, and the Al layers do not have specific crystal orientation in the directions vertical to the layer from selected area electron diffraction patterns below the thickness (3.0 nm) of Al layers. Above the thickness (3.0 nm) of Al layers, the Al layers are highly oriented in Al<111>, so that the transformation from asymmetrical to symmetrical interlayers can be observed. Based on the analysis of all measurements, we build up a model with four steps, which could explain the Al layer thickness transition process in terms of a critical thickness for the nucleation of Al(Pure) and Al(1%wtSi) crystallites.

36 MATERIALS SCIENCE↗

The local structure, magnetic, and transport properties of Cr-doped In{sub 2}O{sub 3} films

Cr-doped In{sub 2}O{sub 3} films were deposited on Si (100) substrates by RF-magnetron sputtering technique. The local structure, magnetic, and transport properties of films are investigated by X-ray diffraction, X-ray photoelectron spectroscopy, X-ray absorption fine structure, Hall effect, R-T, and magnetic measurements. Structural analysis clearly indicates that Cr ions substitute for In{sup 3+} sites of the In{sub 2}O{sub 3} lattice in the valence of +2 states and Cr-related secondary phases or clusters as the source of ferromagnetism is safely ruled out. The films with low Cr concentration show a crossover from semiconducting to metallic transport behavior, whereas only semiconducting behavior is observed in high Cr concentration films. The transport property of all films is governed by Mott variable range hopping behavior, suggesting that the carriers are strongly localized. Magnetic characterizations show that the saturated magnetization of films increases first, and then decreases with Cr doping, while carrier concentration n{sub c} decreases monotonically, implying that the ferromagnetism is not directly induced by the mediated carriers. It can be concluded the ferromagnetism of films is intrinsic and originates from electrons bound in defect states associated with oxygen vacancies.

36 MATERIALS SCIENCE↗

Two-phase nc-TiN/a-(C,CN{sub x}) nanocomposite films: A HRTEM and MC simulation study

The grain growth in two-phase nanocomposite Ti-C{sub x}-N{sub y} thin films grown by reactive close-field unbalanced magnetron sputtering in an Ar-N{sub 2} gas mixture with microstructures comprising of nanocrystalline (nc-) Ti(N,C) phase surrounded by amorphous (a-) (C,CN{sub x}) phase was investigated by a combination of high-resolution transmission electron microscopy (HRTEM) and Monte Carlo (MC) simulations. The HRTEM results revealed that amorphous-free solid solution Ti(C,N) thin films exhibited polycrystallites with different sizes, orientations and irregular shapes. The grain size varied in the range between several nanometers and several decade nanometers. Further increase of C content (up to {approx}19 at.% C) made the amorphous phase wet nanocrystallites, which strongly hindered the growth of nanocrystallites. As a result, more regular Ti(C,N) nanocrystallites with an average size of {approx}5 nm were found to be separated by {approx}0.5-nm amorphous phases. When C content was further increased (up to {approx}48 at.% in this study), thicker amorphous matrices were produced and followed by the formation of smaller sized grains with lognormal distribution. Our MC analysis indicated that with increasing amorphous volume fraction (i.e. increasing C content), the transformation from nc/nc grain boundary (GB)-curvature-driven growth to a/nc GB-curvature-driven growth is directly responsible for the observed grain growth from great inhomogeneity to homogeneity process.

36 MATERIALS SCIENCE↗

Morphology, electrical, and optical properties of heavily doped ZnTe:Cu thin films

We report on a study of the physical properties of ZnTe:Cu films with Cu content up to ∼12 at. % prepared using rf magnetron sputtering. The composition and lateral homogeneities are studied using X-ray photoelectron spectroscopy (XPS). Atomic force microscopy measurements on films deposited at different substrate temperatures (up to 325 °C) yielded activation energy of 12 kJ/mole for the grains growth. The results of XPS and electrical and optical measurements provide evidence for the formation of the ternary zinc copper telluride alloy in films containing Cu concentration above ∼4 at. %. The XPS results suggest that copper is incorporated in the alloy with oxidation state Cu{sup 1+} so that the alloy formula can be written Zn{sub 1−y}Cu{sub y} Te with y = 2−x, where x is a parameter measuring the stoichiometry in the Cu site. The formation of this alloy causes appreciable shift in the binding energies of the XPS peaks besides an IR shift in the energy band gap. Detailed analysis of the optical absorption data revealed the presence of two additional transitions, besides the band gap one, originating from the Γ{sub 8} and Γ{sub 7} (spin-orbit) valence bands to a donor level at ∼0.34 eV below the Γ{sub 6} conduction band. This interpretation yields a value for the valence band splitting energy Δ≅ 0.87 eV independent of copper concentration. On the other hand, the mechanism of formation of the alloy is tentatively explained in terms of a point defect reaction in which substitutional Cu defect Cu{sub Zn} is also created. Assuming that substitutional Cu is the dominant acceptor in the Zn rich alloy as in ZnTe, its formation energy was determined to be 1.7 eV close to the theoretical value (1.41 eV) in ZnTe.

36 MATERIALS SCIENCE↗

Evidence of impurity assisted tunneling in SiGe/Si heterostructures

The investigation of vertical transport in delta-doped SiGe/Si heterostructures has been presented. The asymmetrical triple barrier structure was grown by MBE technique. The delta layer of boron impurity was placed into the center of narrower quantum well. The growth procedure was followed by conventional processing including photolithography and plasma etching and magnetron sputtering. SIMS and X-rays diagnostics have been used to control the desired structure. The conductance of the structure has been measured at liquid helium temperature and analyzed. All pronounced resonances have been identified. The resonant feature near 60 mV has to be attributed to impurity-assisted tunneling that is supported by calculation of binding energy of the acceptor in the narrower quantum well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic properties of epitaxial Heusler alloy Fe{sub 2}Cr{sub 0.5}Co{sub 0.5}Si

This paper reports the study of structural and magnetic properties of Heusler alloy Fe{sub 2}Cr{sub 0.5}Co{sub 0.5}Si (FCCS) thin film and its tunnel magnetoresistance (TMR) effect. The smooth quaternary Heusler alloy FCCS film with surface roughness of rms value of 0.25 nm measured by atomic force microscopy and partial L2{sub 1} phase was obtained by magnetron sputtering at room temperature followed by in-situ annealing at 400 °C. The saturation magnetization and coercivity of FCCS are 410 emu/cm{sup 3} and 20 Oe, respectively. The magnetic tunnel junctions (MTJs) using FCCS as free layer were studied in detail as a function of post-annealing temperature. A TMR ratio of 15.6% has been achieved with 300 °C post-annealing. This is about twice the highest TMR ratio obtained in MTJs using Fe{sub 2}CrSi. The enhancement of TMR ratio can be attributed to the successful tuning of the Fermi level of Fe{sub 2}CrSi close to the center of the minority band gap by Co-doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermochromic undoped and Mg-doped VO{sub 2} thin films and nanoparticles: Optical properties and performance limits for energy efficient windows

Undoped and Mg-doped thermochromic VO{sub 2} films with atom ratios z ≡ Mg/(Mg + V) of 0 ≤ z < 0.21 were deposited by reactive DC magnetron sputtering onto heated glass and carbon substrates. Elemental compositions were found by Rutherford backscattering spectrometry. Optical constants were determined from transmittance and reflectance measurements and were used for modeling the optical properties of thin films and dilute nanoparticle composite layers below and above the critical temperature for thermochromic switching between a low-temperature infrared transparent state and a high-temperature infrared reflecting or absorbing state. Mg-doped films showed superior luminous transmittance T{sub lum} and solar transmittance modulation ΔT{sub sol} compared to undoped VO{sub 2} films, and both of these parameters could be further enhanced by anti-reflection. VO{sub 2}-containing nanocomposites had much larger values of T{sub lum} and ΔT{sub sol} than VO{sub 2}-based films. Mg-doping was found to erode the properties of the nanocomposites. Approximate performance limits are given on T{sub lum} and ΔT{sub sol} for thermochromic VO{sub 2} films, with and without Mg doping and antireflection coating, and also for VO{sub 2}-containing dilute nanocomposites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Co{sub 2}FeAl Heusler thin films grown on Si and MgO substrates: Annealing temperature effect

10 nm and 50 nm Co{sub 2}FeAl (CFA) thin films have been deposited on MgO(001) and Si(001) substrates by magnetron sputtering and annealed at different temperatures. X-rays diffraction revealed polycrystalline or epitaxial growth (according to CFA(001)[110]//MgO(001)[100] epitaxial relation) for CFA films grown on a Si and on a MgO substrate, respectively. For these later, the chemical order varies from the A2 phase to the B2 phase when increasing the annealing temperature (T{sub a}), while only the A2 disorder type has been observed for CFA grown on Si. Microstrip ferromagnetic resonance (MS-FMR) measurements revealed that the in-plane anisotropy results from the superposition of a uniaxial and a fourfold symmetry term for CFA grown on MgO substrates. This fourfold anisotropy, which disappears completely for samples grown on Si, is in accord with the crystal structure of the samples. The fourfold anisotropy field decreases when increasing T{sub a}, while the uniaxial anisotropy field is nearly unaffected by T{sub a} within the investigated range. The MS-FMR data also allow for concluding that the gyromagnetic factor remains constant and that the exchange stiffness constant increases with T{sub a}. Finally, the FMR linewidth decreases when increasing T{sub a}, due to the enhancement of the chemical order. We derive a very low intrinsic damping parameter (1.1×10{sup −3} and 1.3×10{sup −3} for films of 50 nm thickness annealed at 615 °C grown on MgO and on Si, respectively)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Perpendicular magnetic anisotropy in epitaxially strained cobalt-ferrite (001) thin films

We investigated the dependencies of both the magnetization characteristics and the perpendicular magnetic anisotropy of Co{sub x}Fe{sub 3–x}O{sub 4}(001) epitaxial films (x = 0.5 and 0.75) on the growth conditions of the reactive magnetron sputtering process. Both saturation magnetization and the magnetic uniaxial anisotropy constant K{sub u} are strongly dependent on the reactive gas (O{sub 2}) flow rate, although there is little difference in the surface structures for all samples observed by reflection high-energy electron diffraction. In addition, certain dead-layer-like regions were observed in the initial stage of the film growth for all films. Our results suggest that the magnetic properties of Co{sub x}Fe{sub 3–x}O{sub 4} epitaxial films are governed by the oxidation state and the film structure at the vicinity of the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and high frequency properties of nanogranular CoFe-yttrium-doped zirconia films

Soft magnetic nanogranular FeCo-Yttrium-doped Zirconia thin films were fabricated using RF magnetron sputtering at different sputtering power. It was found that film electrical resistivity (ρ) decreased steeply with the increase of sputtering power, while both saturation magnetization (4πM{sub s}) and natural ferromagnetic resonant frequency (ƒ{sub r}) increased with the sputtering power ascending from 100 W to 200 W, but decreased when sputtering power exceeded 200 W. X-ray diffraction analysis and transmission electron microscopy confirmed that the films were nanocrystalline/amorphous composites. A saturation magnetization as high as 15.4 kGs and a ferromagnetic resonance frequency above 3 GHz were obtained.

36 MATERIALS SCIENCE↗

Ellipsometry characterization of polycrystalline ZnO layers with the modeling of carrier concentration gradient: Effects of grain boundary, humidity, and surface texture

Spectroscopic ellipsometry (SE) has been applied to study the effects of grain boundary, humidity, and surface texture on the carrier transport properties of Al-doped ZnO layers fabricated by dc and rf magnetron sputtering. In the SE analysis, the variation in the free carrier absorption toward the growth direction, induced by the ZnO grain growth on foreign substrates, has been modeled explicitly by adopting a multilayer model in which the optical carrier concentration (N{sub opt}) varies continuously with a constant optical mobility (μ{sub opt}). The effect of the grain boundary has been studied by comparing μ{sub opt} with Hall mobility (μ{sub Hall}). The change in μ{sub Hall}/μ{sub opt} indicates a sharp structural transition of the ZnO polycrystalline layer at a thickness of d ∼ 500 nm, which correlates very well with the structure confirmed by transmission electron microscopy. In particular, below the transition thickness, the formation of the high density grain boundary leads to the reduction in the μ{sub Hall}/μ{sub opt} ratio as well as N{sub opt}. As a result, we find that the thickness dependence of the carrier transport properties is almost completely governed by the grain boundary formation. On the other hand, when the ZnO layer is exposed to wet air at 85 °C, μ{sub Hall} reduces drastically with a minor variation of μ{sub opt} due to the enhanced grain boundary scattering. We have also characterized textured ZnO:Al layers prepared by HCl wet etching by SE. The analysis revealed that the near-surface carrier concentration increases slightly after the etching. We demonstrate that the SE technique can be applied to distinguish various rough textured structures (size ∼ 1 μm) of the ZnO layers prepared by the HCl etching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Filtered pulsed cathodic arc deposition of fullerene-like carbon and carbon nitride films

Carbon and carbon nitride films (CN{sub x}, 0 ≤ x ≤ 0.26) were deposited by filtered pulsed cathodic arc and were investigated using transmission electron microscopy and X-ray photoelectron spectroscopy. A “fullerene-like” (FL) structure of ordered graphitic planes, similar to that of magnetron sputtered FL-CN{sub x} films, was observed in films deposited at 175 °C and above, with N{sub 2} pressures of 0 and 0.5 mTorr. Higher substrate temperatures and significant nitrogen incorporation are required to produce similar FL structure by sputtering, which may, at least in part, be explained by the high ion charge states and ion energies characteristic of arc deposition. A gradual transition from majority sp{sup 3}-hybridized films to sp{sup 2} films was observed with increasing substrate temperature. High elastic recovery, an attractive characteristic mechanical property of FL-CN{sub x} films, is evident in arc-deposited films both with and without nitrogen content, and both with and without FL structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of highly transparent diamond-like carbon anti-reflecting coating for Si solar cell application

ARC grade highly transparent unhydrogenated diamond-like carbon (DLC) films were produced, directly from a-C target, using RF magnetron sputtering deposition technique, for optoelectronic applications. Optical band gap, transmittance, reflectance, sp{sup 3} fraction, I{sub D}/I{sub G}, density, and refractive index of the films have been estimated with the help of optical tools like Uv-vis spectrophotometer, ellipsometer and micro-Raman. Optimum ARC-qualities have been identified in low-temperature grown DLC films at an Ar pressure of 4 mTorr in the reactor, accomplishing its key requirements for use in silicon solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of iron mononitride thin films

In this work we have studied the crystal structural and local ordering of iron and nitrogen in iron mononitride thin films prepared using dc magnetron sputtering at sputtering power of 100W and 500W. The films were sputtered using pure nitrogen to enhance the reactivity of nitrogen with iron. The x-ray diffraction (XRD), conversion electron Mössbauer spectroscopy (CEMS) and soft x-ray absorption spectroscopy (SXAS) studies shows that the film crystallizes in ZnS-type crystal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resonant indirect excitation of Gd{sup 3+} in AlN thin films

We studied the efficient indirect excitation of Gd{sup 3+} ions in AlN thin films. C-axis oriented polycrystalline thin films of Al{sub 0.997}Gd{sub 0.003}N/AlN were grown on fused silica substrates using a reactive radio-frequency magnetron sputtering technique. The intra-orbital electron transition in Gd{sup 3+} showed a narrow luminescence line at 3.9 eV. The photoluminescence (PL) excitation (PLE) spectrum exhibited a peak originating from efficient indirect energy transfer from the band edge of AlN to Gd{sup 3+} ions. The PLE peak shifted and the PL intensity showed a dramatic change when the AlN band gap was varied by changing the temperature. Energy scanning performed by changing the band-gap energy of AlN with temperature revealed several resonant channels of energy transfer into the higher excited states of Gd{sup 3+}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalous thickness-dependent strain states and strain-tunable magnetization in Zn-doped ferrite epitaxial films

A series of Zn{sub x}Fe{sub 3−x}O{sub 4} (ZFO, x = 0.4) thin films were epitaxially deposited on single-crystal (001)-SrTiO{sub 3} (STO) substrates by radio frequency magnetron sputtering. The anomalous thickness-dependent strain states of ZFO films were found, i.e., a tensile in-plane strain exists in the thinner ZFO film and which monotonously turns into compressive in the thicker films. Considering the lattice constant of bulk ZFO is bigger than that of STO, this strain state cannot be explained in the conventional framework of lattice-mismatch-induced strain in the hetero-epitaxial system. This unusual phenomenon is proposed to be closely related to the Volmer-Weber film growth mode in the thinner films and incorporation of the interstitial atoms into the island's boundaries during subsequent epitaxial growth of the thicker films. The ZFO/STO epitaxial film is found in the nature of magnetic semiconductor by transport measurements. The in-plane magnetization of the ZFO/STO films is found to increase as the in-plane compressive strain develops, which is further proved in the (001)-ZFO/PMN-PT film where the film strain state can be in situ controlled with applied electric field. This compressive-strain-enhanced magnetization can be attributed to the strain-mediated electric-field-induced in-plane magnetic anisotropy field enhancement. The above results indicate that strain engineering on magnetic oxide semiconductor ZFO films is promising for novel oxide-electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of SnO{sub 2} thin films doped with Fe to 10%

Appropriate conditions for SnO{sub 2} powder synthesis doped with iron to 10% by using sol-gel route are found. The powders obtained have been analyzed by means of analytic spectroscopic techniques: Raman, Mössbauer, diffuse reflectance, Fourier transform infrared, and X-ray diffraction. Sn{sub 0.9}Fe{sub 0.1}O{sub 2} thin films deposited by AC magnetron sputtering on silicon substrates are obtained and characterized. A crystal structure rutile-type was found for thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗