Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Chemical-specific Parameters Dataset

The chemical-specific parameters dataset is searchable for physicochemical information for multiple chemicals simultaneously. After selecting chemicals of interest and the desired parameters, the RAIS will generate a table containing the values, chosen according to an established hierarchy. Results can be downloaded in Excel format. Over 40 parameters are available, including melting point, boiling point, density, density, vapor pressure, water solubility, and Henry’s Law constants. Thirteen primary sources are used to populate the dataset of chemical-specific parameters. These values should be used in cancer risk and noncancer hazard assessments for the calculation of preliminary remediation goals (PRGs), hazard characterization, and transport modeling. Users can select up to 1000 chemicals per query. The dataset supports environmental risk assessments, regulatory decision-making, and environmental planning with tools for benchmarking against risk-based standards. This structured approach ensures a robust evaluation of environmental risks tailored to regulatory needs.

Dolislager, Fred [Oak Ridge National Laboratory (O↗

Orbitally selective resonant photodoping to enhance superconductivity

Signatures of superconductivity at elevated temperatures above T c in high-temperature superconductors have been observed near 1/8 hole doping for photoexcitation with infrared or optical light polarized either in the CuO 2 plane or along the c axis. While the use of in-plane polarization has been effective for incident energies aligned to specific phonons, c-axis laser excitation in a broad range between 5 μm and 400 nm was found to affect the superconducting dynamics in striped La 1.88 5Ba 0.115 CuO 4 , with a maximum enhancement in the 1/ω dependence to the conductivity observed at 800 nm. This broad energy range, specifically 800 nm, is not resonant with any phonon modes, yet induced electronic excitations appear to be connected to superconductivity at energy scales well above the typical gap energies in the cuprates. A critical question is, What can be responsible for such an effect at 800 nm? Using time-dependent exact diagonalization, we demonstrate that the holes in the CuO 2 plane can be photoexcited into the charge reservoir layers at resonant wavelengths within a multiband Hubbard model. This orbitally selective photoinduced charge transfer effectively changes the in-plane doping level, which can lead to an enhancement of T c near the 1/8 anomaly.

36 MATERIALS SCIENCE↗

Multiplexed Knockouts in the Model Diatom Phaeodactylum by Episomal Delivery of a Selectable Cas9

Marine diatoms are eukaryotic microalgae that play significant ecological and biogeochemical roles in oceans. They also have significant potential as organismal platforms for exploitation to address biotechnological and industrial goals. In order to address both modes of research, sophisticated molecular and genetic tools are required. We presented here new and improved methodologies for introducing CRISPRCas9 to the model diatom Phaeodactylum tricornutum cells and a streamlined protocol for genotyping mutant cell lines with previously unknown phenotypes. First, bacterialconjugation was optimized for the delivery of Cas9 by transcriptionally fusing Cas9 to a selectable marker by the 2A peptide. An episome cloning strategy using both negative and positive selection was developed to streamline CRISPR-episome assembly. Next, cell line picking and genotyping strategies, that utilize manual sequencing curation, TIDE sequencing analysis, and a T7 endonuclease assay, were developed to shorten the time required to generate mutants. Following this new experimental pipeline, both singlegene and two-gene knockout cell lines were generated at mutagenesis efficiencies of 48% and 25%, respectively. Lastly, a protocol for precise gene insertions via CRISPRCas9 targeting was developed using particle-bombardment transformation methods. Overall, the novel Cas9 episome design and improved genotyping methods presented here allow for quick and easy genotyping and isolation of Phaeodactylum mutant cell lines (less than 3 weeks) without relying on a known phenotype to screen for mutants.

59 BASIC BIOLOGICAL SCIENCES↗

Cross-national analysis of food security drivers: comparing results based on the Food Insecurity Experience Scale and Global Food Security Index

Abstract The second UN Sustainable Development Goal establishes food security as a priority for governments, multilateral organizations, and NGOs. These institutions track national-level food security performance with an array of metrics and weigh intervention options considering the leverage of many possible drivers. We studied the relationships between several candidate drivers and two response variables based on prominent measures of national food security: the 2019 Global Food Security Index (GFSI) and the Food Insecurity Experience Scale’s (FIES) estimate of the percentage of a nation’s population experiencing food security or mild food insecurity (FI ). We compared the contributions of explanatory variables in regressions predicting both response variables, and we further tested the stability of our results to changes in explanatory variable selection and in the countries included in regression model training and testing. At the cross-national level, the quantity and quality of a nation’s agricultural land were not predictive of either food security metric. We found mixed evidence that per-capita cereal production, per-hectare cereal yield, an aggregate governance metric, logistics performance, and extent of paid employment work were predictive of national food security. Household spending as measured by per-capita final consumption expenditure (HFCE) was consistently the strongest driver among those studied, alone explaining a median of 92% and 70% of variation (based on out-of-sample R 2 ) in GFSI and FI , respectively. The relative strength of HFCE as a predictor was observed for both response variables and was independent of the countries used for model training, the transformations applied to the explanatory variables prior to model training, and the variable selection technique used to specify multivariate regressions. The results of this cross-national analysis reinforce previous research supportive of a causal mechanism where, in the absence of exceptional local factors, an increase in income drives increase in food security. However, the strength of this effect varies depending on the countries included in regression model fitting. We demonstrate that using multiple response metrics, repeated random sampling of input data, and iterative variable selection facilitates a convergence of evidence approach to analyzing food security drivers.

42 ENGINEERING↗

Butanol Separation from Humid CO 2 -Containing Multicomponent Vapor Mixtures by Zeolitic Imidazolate Frameworks

Butanol is a promising renewable fuel and feedstock. A major challenge in fermentative butanol production is to find a cost-effective butanol separation process from dilute aqueous solutions, usually an acetone-butanol-ethanol (ABE) mixture. Nanoporous zeolitic imidazolate frameworks (ZIFs) have shown potential for alcohol separation from dilute solutions. However, little is known about butanol separation from multicomponent mixtures using ZIFs, including the effects of the humid acid gas (CO 2 ) used to sparge the fermenter and generate the vapor product stream. We present a study of butanol separation by ZIF-8, ZIF-90, ZIF-71 and hybrid ZIF-8–90 and ZIF-8–71 adsorbents with binary butanol/water and multicomponent ABE feeds. To obtain reliable structure–property relations for ZIF adsorbents in realistic conditions, we combine multicomponent vapor breakthrough with structural, textural, and stability characterization techniques in humid CO 2 environments. In the absence of CO 2 , more hydrophobic materials such as ZIF-8, ZIF-8 55 -71 45 , ZIF-8 70 -90 30 , and ZIF-71 are found to be excellent candidates with butanol/water selectivities >10 and butanol capacities >3.5 mmol/g. However, in the presence of humid CO 2 , all the materials except ZIF-71 are found to degrade. The mechanistic aspects of this degradation are studied by FTIR spectroscopy and explained based upon acid gas attack of Zn–N coordinate bonds. ZIF-71 emerges as an excellent candidate owing to its acid gas stability, good butanol adsorption capacity, and selectivity. Vapor breakthrough with a model ABE solution demonstrates the high butanol selectivity of ZIF-71 relative to acetone, ethanol, and water and the recovery of a 65 mol % butanol product by desorption at 453 K. Finally, this study highlights the importance of determining structure–property relationships of MOF/ZIF materials in realistic multicomponent conditions, and the importance of acid gas stability in their applications.

09 BIOMASS FUELS↗

Cosmogenic neutrinos: parameter space and detectabilty from PeV to ZeV

While propagating from their source to the observer, ultrahigh energy cosmic rays interact with cosmological photon backgrounds and generate to the so-called ''cosmogenic neutrinos''. Here we study the parameter space of the cosmogenic neutrino flux given recent cosmic ray data and updates on plausible source evolution models. The shape and normalization of the cosmogenic neutrino flux are very sensitive to some of the current unknowns of ultrahigh energy cosmic ray sources and composition. We investigate various chemical compositions and maximum proton acceleration energies E{sub p,max} which are allowed by current observations. We consider different models of source evolution in redshift and three possible scenarios for the Galactic to extragalactic transition. We summarize the parameter space for cosmogenic neutrinos into three regions: an optimistic scenario that is currently being constrained by observations, a plausible range of models in which we base many of our rate estimates, and a pessimistic scenario that will postpone detection for decades to come. We present the implications of these three scenarios for the detection of cosmogenic neutrinos from PeV to ZeV (10{sup 14−21} eV) with the existing and upcoming instruments. In the plausible range of parameters, the narrow flux variability in the EeV energy region assures low but detectable rates for IceCube (0.06–0.2 neutrino per year) and the Pierre Auger Observatory (0.03–0.06 neutrino per year), and detection should happen in the next decade. If EeV neutrinos are detected, PeV information can help select between competing models of cosmic ray composition at the highest energy and the Galactic to extragalactic transition at ankle energies. With improved sensitivity, ZeV neutrino observatories, such as ANITA and JEM-EUSO could explore and place limits on the maximum acceleration energy.

79 ASTRONOMY AND ASTROPHYSICS↗

Mass spectral imaging showing the plant growth-promoting rhizobacteria's effect on the Brachypodium awn

The plant growth-promoting rhizobacteria (PGPR) on the host plant surface play a key role in biological control and pathogenic response in plant functions and growth. However, it is difficult to elucidate the PGPR effect on plants. Such information is important in biomass production and conversion. Brachypodium distachyon (Brachypodium), a genomics model for bioenergy and native grasses, was selected as a C3 plant model; and the Gram-negative Pseudomonas fluorescens SBW25 ( P.) and Gram-positive Arthrobacter chlorophenolicus A6 ( A.) were chosen as representative PGPR strains. The PGPRs were introduced to the Brachypodium seed's awn prior to germination, and their possible effects on the seeding and growth were studied using different modes of time-of-flight secondary ion mass spectrometry (ToF-SIMS) measurements, including a high mass-resolution spectral collection and delayed image extraction. We observed key plant metabolic products and biomarkers, such as flavonoids, phenolic compounds, fatty acids, and auxin indole-3-acetic acid in the Brachypodium awns. Furthermore, principal component analysis and two-dimensional imaging analysis reveal that the Brachypodium awns are sensitive to the PGPR, leading to chemical composition and morphology changes on the awn surface. Our results show that ToF-SIMS can be an effective tool to probe cell-to-cell interactions at the biointerface. This work provides a new approach to studying the PGPR effects on awn and shows its potential for the research of plant growth in the future.

metabolite↗

In Silico Prediction of the Toxicity of Nitroaromatic Compounds: Application of Ensemble Learning QSAR Approach

In this work, a dataset of more than 200 nitroaromatic compounds is used to develop Quantitative Structure–Activity Relationship (QSAR) models for the estimation of in vivo toxicity based on 50% lethal dose to rats (LD 50 ). An initial set of 4885 molecular descriptors was generated and applied to build Support Vector Regression (SVR) models. The best two SVR models, SVR_A and SVR_B, were selected to build an Ensemble Model by means of Multiple Linear Regression (MLR). The obtained Ensemble Model showed improved performance over the base SVR models in the training set (R 2 = 0.88), validation set (R 2 = 0.95), and true external test set (R 2 = 0.92). The models were also internally validated by 5-fold cross-validation and Y-scrambling experiments, showing that the models have high levels of goodness-of-fit, robustness and predictivity. The contribution of descriptors to the toxicity in the models was assessed using the Accumulated Local Effect (ALE) technique. The proposed approach provides an important tool to assess toxicity of nitroaromatic compounds, based on the ensemble QSAR model and the structural relationship to toxicity by analyzed contribution of the involved descriptors.

54 ENVIRONMENTAL SCIENCES↗

THREE-DIMENSIONAL ATMOSPHERIC CIRCULATION OF HOT JUPITERS ON HIGHLY ECCENTRIC ORBITS

Of the over 800 exoplanets detected to date, over half are on non-circular orbits, with eccentricities as high as 0.93. Such orbits lead to time-variable stellar heating, which has major implications for the planet's atmospheric dynamical regime. However, little is known about the fundamental dynamical regime of such planetary atmospheres, and how it may influence the observations of these planets. Therefore, we present a systematic study of hot Jupiters on highly eccentric orbits using the SPARC/MITgcm, a model which couples a three-dimensional general circulation model (the MITgcm) with a plane-parallel, two-stream, non-gray radiative transfer model. In our study, we vary the eccentricity and orbit-average stellar flux over a wide range. We demonstrate that the eccentric hot Jupiter regime is qualitatively similar to that of planets on circular orbits; the planets possess a superrotating equatorial jet and exhibit large day-night temperature variations. As in Showman and Polvani, we show that the day-night heating variations induce momentum fluxes equatorward to maintain the superrotating jet throughout its orbit. We find that as the eccentricity and/or stellar flux is increased (corresponding to shorter orbital periods), the superrotating jet strengthens and narrows, due to a smaller Rossby deformation radius. For a select number of model integrations, we generate full-orbit light curves and find that the timing of transit and secondary eclipse viewed from Earth with respect to periapse and apoapse can greatly affect what we see in infrared (IR) light curves; the peak in IR flux can lead or lag secondary eclipse depending on the geometry. For those planets that have large temperature differences from dayside to nightside and rapid rotation rates, we find that the light curves can exhibit 'ringing' as the planet's hottest region rotates in and out of view from Earth. These results can be used to explain future observations of eccentric transiting exoplanets.

79 ASTRONOMY AND ASTROPHYSICS↗

Higgs boson hadronic branching ratios at the ILC

We present a study of the Higgs boson decay branching ratios to bb, cc, and gluons, one of the cornerstones of the physics program at the International Linear Collider. A standard model Higgs boson of 120 GeV mass, produced in the Higgs-strahlung process at {radical}(s)=250 GeV, was investigated using the full detector simulation and reconstruction procedures. The analysis was performed in the framework of the Silicon Detector concept with full account of inclusive standard model backgrounds. The selected decay modes contained two heavy flavor jets in the final state and required excellent flavor tagging through precise reconstruction of interaction and decay vertices in the detector. A new signal discrimination technique using correlations of neural network outputs was used to determine the branching ratios and estimate their uncertainties, 4.8%, 8.4%, and 12.2% for bb, cc, and gluons, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electrochemical hydrogen isotope exchange of amines controlled by alternating current frequency

Here, we report an electrochemical protocol for hydrogen isotope exchange (HIE) at α-C(sp 3 )–H amine sites. Tetrahydroisoquinoline and pyrrolidine are selected as two model substrates because of their different proton transfer (PT) and hydrogen atom transfer (HAT) kinetics at the α-C(sp 3 )–H amine sites, which are utilized to control the HIE reaction outcome at different applied alternating current (AC) frequencies. We found the highest deuterium incorporation for tetrahydroisoquinolines at 0 Hz (i.e., under direct current (DC) electrolysis conditions) and pyrrolidines at 0.5 Hz. Analysis of the product distribution and D isotope incorporation at different frequencies reveals that the HIE of tetrahydroisoquinolines is limited by its slow HAT, whereas the HIE of pyrrolidines is limited by the overoxidation of its α-amino radical intermediates. Here, the AC-frequency-dependent HIE of amines can be potentially used to achieve selective labeling of α-amine sites in one drug molecule, which will significantly impact the pharmaceutical industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Weakly Deleterious Mutations and Low Rates of Recombination Limit the Impact of Natural Selection on Bacterial Genomes

Free-living bacteria are usually thought to have large effective population sizes, and so tiny selective differences can drive their evolution. However, because recombination is infrequent, “background selection” against slightly deleterious alleles should reduce the effective population size ( N e ) by orders of magnitude. For example, for a well-mixed population with 10 12 individuals and a typical level of homologous recombination ( r / m = 3, i.e., nucleotide changes due to recombination [ r ] occur at 3 times the mutation rate [ m ]), we predict that N e is < 10 7 . An argument for high N e values for bacteria has been the high genetic diversity within many bacterial “species,” but this diversity may be due to population structure: diversity across subpopulations can be far higher than diversity within a subpopulation, which makes it difficult to estimate N e correctly. Given an estimate of N e , standard population genetics models imply that selection should be sufficient to drive evolution if N e × s is >1, where s is the selection coefficient. We found that this remains approximately correct if background selection is occurring or when population structure is present. Overall, we predict that even for free-living bacteria with enormous populations, natural selection is only a significant force if s is above 10 -7 or so. Because bacteria form huge populations with trillions of individuals, the simplest theoretical prediction is that the better allele at a site would predominate even if its advantage was just 10 -9 per generation. In other words, virtually every nucleotide would be at the local optimum in most individuals. A more sophisticated theory considers that bacterial genomes have millions of sites each and selection events on these many sites could interfere with each other, so that only larger effects would be important. However, bacteria can exchange genetic material, and in principle, this exchange could eliminate the interference between the evolution of the sites. In conclusion, we used simulations to confirm that during multisite evolution with realistic levels of recombination, only larger effects are important. We propose that advantages of less than 10 -7 are effectively neutral.

59 BASIC BIOLOGICAL SCIENCES↗

Sensitivity/Uncertainty Comparison Study Involving IRSN, LANL, and ORNL Tools to Support Validation

Under a DOE Nuclear Criticality Safety Program (NCSP) task involving Analytical Methods, three Laboratories collaborated in a comparison of results obtained from Sensitivity/Uncertainty (S/U) packages relevant to validation of transport codes. The task involves Institut de Radioprotection et de Sûreté Nucléaire (IRSN), Los Alamos National Laboratory (LANL), and Oak Ridge National Laboratory (ORNL) comparing results of MORET 5/MACSENS V3.0, MCNP6.2/Whisper-1.1, and SCALE 6.2.3/TSUNAMI/USLSTATS respectively. All Monte Carlo transport code results utilize nuclear data from ENDF/B-VII.1 evaluation. This study examines five cases from the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) selected as application models: IEU-MET- FAST-002-001, LEU-COMP-THERM-001-001, LEU-SOL-THERM-004-001, MIX-COMP- THERM-001-001, and U233-SOL-THERM-001-001. This is a continuation of a previous study to examine Pu and HEU cases: HEU-MET-FAST-013-001, HEU-SOL-THERM-001-008, PU-MET- FAST-022-001, and PU-SOL-THERM-001-001. Ultimately, comparison is made between Upper Subcritical Limits (USLs) obtained using each code package for each application case. Since differences exist in whether packages take into account margin of subcriticality (MOS), the USL is computed using only bias and bias uncertainty, also known as the calculational margin (CM) in ANSI/ANS-8.24. Results comparison appears to show that benchmark selection has a greater influence on the USL than the method used for calculation of bias and bias uncertainty.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling the Risk of Radiation-Induced Acute Esophagitis for Combined Washington University and RTOG Trial 93-11 Lung Cancer Patients

Purpose: To construct a maximally predictive model of the risk of severe acute esophagitis (AE) for patients who receive definitive radiation therapy (RT) for non-small-cell lung cancer. Methods and Materials: The dataset includes Washington University and RTOG 93-11 clinical trial data (events/patients: 120/374, WUSTL = 101/237, RTOG9311 = 19/137). Statistical model building was performed based on dosimetric and clinical parameters (patient age, sex, weight loss, pretreatment chemotherapy, concurrent chemotherapy, fraction size). A wide range of dose-volume parameters were extracted from dearchived treatment plans, including Dx, Vx, MOHx (mean of hottest x% volume), MOCx (mean of coldest x% volume), and gEUD (generalized equivalent uniform dose) values. Results: The most significant single parameters for predicting acute esophagitis (RTOG Grade 2 or greater) were MOH85, mean esophagus dose (MED), and V30. A superior-inferior weighted dose-center position was derived but not found to be significant. Fraction size was found to be significant on univariate logistic analysis (Spearman R = 0.421, p < 0.00001) but not multivariate logistic modeling. Cross-validation model building was used to determine that an optimal model size needed only two parameters (MOH85 and concurrent chemotherapy, robustly selected on bootstrap model-rebuilding). Mean esophagus dose (MED) is preferred instead of MOH85, as it gives nearly the same statistical performance and is easier to compute. AE risk is given as a logistic function of (0.0688 Asterisk-Operator MED+1.50 Asterisk-Operator ConChemo-3.13), where MED is in Gy and ConChemo is either 1 (yes) if concurrent chemotherapy was given, or 0 (no). This model correlates to the observed risk of AE with a Spearman coefficient of 0.629 (p < 0.000001). Conclusions: Multivariate statistical model building with cross-validation suggests that a two-variable logistic model based on mean dose and the use of concurrent chemotherapy robustly predicts acute esophagitis risk in combined-data WUSTL and RTOG 93-11 trial datasets.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Comparative Study of Multi-material Data Structures for Computational Physics Applications

The data structures used to represent the multi-material state of a computational physics application can have a drastic impact on the performance of the application. We look at efficient data structures for sparse applications where there may be many materials, but only one or few in most computational cells. We develop simple performance models for use in selecting possible data structures and programming patterns. We verify the analytic models of performance through a small test program of the representative cases.

97 MATHEMATICS AND COMPUTING↗

Empirical Validation of Multi-Zone HVAC System Model: Evaluation of Existing Infiltration Models used in Building Energy Simulation

Infiltration can have a significant impact on building loads. Studies have shown that infiltration can account for 15-40% of annual space conditioning needs in commercial buildings (Emmerich et al. 2019; Younes et al. 2012). The driving force of infiltration is the pressure difference across the building envelope caused by wind, the stack effect (known as buoyancy effect), and the operation of ventilation equipment. Wind pressure is governed by wind direction, speed, building shape, and other structures around the building. The stack effect is a function of the building height and air density differences of ambient air (Han, 2015). The effect of wind is dominant in low-rise residential buildings, and the stack effect is dominant in highrise buildings (ASHRAE 2017). In building energy simulation programs (e.g., EnergyPlus), various empirical infiltration models (e.g., the effective leakage area model, the flow coefficient model) are available to simulate infiltration rates. To help users in selecting a proper infiltration model for modeling of the two-story Flexible Research Platform (FRP), the team evaluates the existing infiltration models in EnergyPlus based on field measurements from the FRP. The blower door and tracer gas decay tests were performed in the FRP. The blower door test result was used to estimate input parameters required in the infiltration models. The actual infiltration rates were estimated with the tracer gas decay test results.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Ethanol pyrolysis kinetics using H 2 O time history measurements behind reflected shock waves

The thermal decomposition of ethanol has been studied under pyrolytic conditions behind reflected shock waves in the 1250 to 1677 K temperature range, at an average pressure of 1.31 atm for a mixture highly diluted in Ar. A laser absorption technique was utilized to measure H 2 O time-histories, and the detailed kinetics mechanism (AramcoMech2.0) was selected among various models from the literature based on its a priori agreement with the experimental data. Sensitivity and rate-of-production analyses were performed and showed that the C 2 H 5 OH→C 2 H 4 + H 2 O (R1) decomposition pathway is almost the sole reaction contributing to H 2 O formation at the early times under the present conditions, allowing an a priori direct measurement of its rate coefficient k 1 . The rate coefficient was determined to be defined as the Arrhenius equation k 1 (s -1 ) = 3.37 × 10 11 exp (–27174 K/T), which is in very good agreement with Kiecherer et al. (2015), where k 1 was also directly determined under similar conditions. Secondary chemical reactions taking place in the thermal decomposition have very low influence in the H 2 O formation during the time-frame selected, leading to an uncertainty for k 1 of approximately 20%. The full H 2 O time histories are useful for validating the full ethanol kinetics mechanism for future validation.

42 ENGINEERING↗

Physics-based modeling and information-theoretic sensor and settings selection for tool wear detection in precision machining

Precision machining of metals is an energy intensive process with applications and impacts across the manufacturing industry. The energy efficiency, product yield, and maintenance of the precision machine require a digital twin that can assist with prognostics and health management. In this report a physics-based model is developed and validated against face milling data, and then used for the timely and precise inference of machining faults that cannot be measured directly. Computer numerical control (CNC) measurements of power and force are used through this physics-based machining model to predict deviations of the outputs of power consumption and cutting forces during normal operation. A model-based fault detection and isolation methodology is applied to determine the optimal (traditional and available) sensor suite and the test settings (admissible input values) that improve the inference of tool wear in face milling. The optimal sensor suite and input test settings are obtained by solving a mixed integer non-linear program that optimizes information-theoretic metrics relevant to the detection and isolation of tool wear from steady-state or transient machining measurements. Dynamic time warping and k—NN classification are then used to validate the robustness of the optimal design for fault detection test design, including the optimal sensor suite.

42 ENGINEERING↗