Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATES, FLAT - STRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Preliminary study of effects of winglets on wing flutter

Some experimental flutter results are presented over a Mach number range from about 0.70 to 0.95 for a simple, swept, tapered, flat-plate wing model having a planform representative of subsonic transport airplanes and for the same wing model equipped with two different upper surface winglets. Both winglets had the same planform and area (about 2 percent of the basic-wing area); however, one weighed about 0.3 percent of the basic-wing weight, and the other weighed about 1.8 percent of the wing weight. The addition of the lighter winglet reduced the wing-flutter dynamic pressure by about 3 percent; the heavier winglet reduced the wing-flutter dynamic pressure by about 12 percent. The experimental flutter results are compared at a Mach number of 0.80 with analytical flutter results obtained by using doublet-lattice and lifting-surface (kernel-function) unsteady aerodynamic theories.

Doggett, R. V., Jr.↗

The International Heat Pipe Experiment

On October 4, 1974, the International Heat Pipe Experiment was launched aboard a Black Brant sounding rocket from White Sands, New Mexico. The flight provided six min of near zero gravity during which a total of ten separate heat pipe experiments was performed. The fifteen heat pipes tested represent some of the latest American and European technology. This flight provided the first reported zero gravity data on cryogenic and flat plate vapor chamber heat pipes. Additionally, valuable design and engineering data were obtained on several other heat pipe configurations. The payload and several of its experiments are discussed.

Mcintosh, R.↗

A wind tunnel investigation of circular and straked cylinders in transonic cross flow

Pressure distributions around circular and circular/strake cylinders were measured in a wind tunnel at Mach numbers from 0.6 to 1.2 with Reynolds number independently variable from 10,000 to 100,000. The local pressures are integrated over the cylinder surface to determine the variation of drag coefficient with both Mach number and Reynolds number. Effects of tunnel blockage are evaluated by comparing results from circular cylinders of various diameters at common Mach and Reynolds number conditions. Compressibility effects are concluded to be responsible for a flight reduction of the drag coefficient near Mach 0.7. Drag increases with strake height, presumably approaching a maximum drag corresponding to a flat plate configuration.

Macha, J.↗

Performance correlations of five solar collectors tested simultaneously outdoors

Collector thermal efficiency, and efficiency degradation with time were measured for 5 flat-plate solar collectors tested simultaneously in an outdoor solar collector test facility. Results indicate that by using collector performance parameters which account for diffuse isolation, outdoor data recorded on cloud days can be used as a measure of performance, as long as the ratio of direct to total insolation exceeds approximately 0.6. These outdoor results also show good agreement with thermal efficiency data obtained indoors in a solar simulator. Significant efficiency degradation occurred on only one of the five collectors exposed to outdoor conditions for a period of one to two years.

Miller, D. R.↗

Exploratory loading techniques

Interferometric holographic nondestructive testing of aluminum, copper, and steel flat plates is reported. Structural weaknesses under positive pressure, negative pressure, heating, and cooling are discussed.

Martin, A. M., III↗

Separating and turbulent boundary layer calculations using polynomial interpretation

Higher order numerical methods derived from polynomial spline interpolation or Hermitian differencing are applied to a separating laminar boundary layer, i.e., the Howarth problem, and the turbulent flat plate boundary layer flow. Preliminary results are presented. It is found that accuracy equal to that of conventional second order accurate finite difference methods is achieved with many fewer mesh points and with reduced computer storage and time requirements.

Rubin, S. G.↗

Boundary layer integral matrix procedure: Verification of models

The three turbulent models currently available in the JANNAF version of the Aerotherm Boundary Layer Integral Matrix Procedure (BLIMP-J) code were studied. The BLIMP-J program is the standard prediction method for boundary layer effects in liquid rocket engine thrust chambers. Experimental data from flow fields with large edge-to-wall temperature ratios are compared to the predictions of the three turbulence models contained in BLIMP-J. In addition, test conditions necessary to generate additional data on a flat plate or in a nozzle are given. It is concluded that the Cebeci-Smith turbulence model be the recommended model for the prediction of boundary layer effects in liquid rocket engines. In addition, the effects of homogeneous chemical reaction kinetics were examined for a hydrogen/oxygen system. Results show that for most flows, kinetics are probably only significant for stoichiometric mixture ratios.

Bonnett, W. S.↗

Introductory remarks

Suggested fluid mechanics research to be conducted in the National Transonic Facility include: wind tunnel calibration; flat plate skin friction, flow visualization and measurement techniques; leading edge separation; high angle of attack separation; shock-boundary layer interaction; submarine shapes; low speed studies of cylinder normal to flow; and wall interference effects. These theoretical aerodynamic investigations will provide empirical inputs or validation data for computational aerodynamics, and increase the usefulness of existing wind tunnels.

Gessow, A.↗

Effect of ice contamination of liquid-nitrogen drops in film boiling

Previously reported vaporization time data of liquid nitrogen drops in film boiling on a flat plate are about 30 percent shorter than predicted from standard laminar film boiling theory. This theory, however, had been found to successfully correlate the data for conventional fluids such as water, ethanol, benzene, or carbon tetrachloride. Experimental evidence that some of the discrepancy for cryogenic fluids results from ice contamination due to condensation is presented. The data indicate a fairly linear decrease in droplet evaporation time with the diameter of the ice crystal residue. After correcting the raw data for ice contamination along with convection, a comparison of theory with experiment shows good agreement.

Schoessow, G. J.↗

Similarity theory of the buoyantly interactive planetary boundary layer with entrainment

A similarity model is developed for the vertical profiles of turbulent flow variables in an entraining turbulent boundary layer of arbitrary buoyant stability. In the general formulation the vertical profiles, internal rotation of the velocity vector, discontinuities or jumps at a capping inversion and bulk aerodynamic coefficients of the boundary layer are given by solutions to a system of ordinary differential equations in the similarity variable. To close the system, a formulation for buoyantly interactive eddy diffusivity in the boundary layer is introduced which recovers Monin-Obukhov similarity near the surface and incorporates a hypothesis accounting for the observed variation of mixing length throughout the boundary layer. The model is tested in simplified versions which depend only on roughness, surface buoyancy, and Coriolis effects by comparison with planetary-boundary-layer wind- and temperature-profile observations, measurements of flat-plate boundary layers in a thermally stratified wind tunnel and observations of profiles of terms in the turbulent kinetic-energy budget of convective planetary boundary layers. On balance, the simplified model reproduced the trend of these various observations and experiments reasonably well, suggesting that the full similarity formulation be pursued further.

Hoffert, M. I.↗

Over-relaxation applied to the MacCormack finite-difference scheme

An over-relaxation procedure is applied to the MacCormack finite-difference scheme in order to reduce the computation time required to obtain a steady-state solution. The implementation of this acceleration procedure to an existing computer program using the regular MacCormack method is extremely simple and does not require additional storage. The over-relaxation procedure does not alter the steady-state solution, which is second-order accurate. The method is first applied to Burgers' equation. A stability condition and an expression for the increase in the rate of convergence are derived. The method is then applied to the calculation of the hypersonic viscous flow over a flat plate, using the complete Navier-Stokes equations, and the inviscid flow over a wedge. Reductions in computing time by factors of 3 and 1.5, respectively, are obtained by over-relaxation.

Desideri, J.-A.↗

Polynomial interpolation methods for viscous flow calculations

Higher-order collocation procedures which result in block-tridiagonal matrix systems are derived from (1) Taylor series expansions and from (2) polynomial interpolation, and the relationships between the two formulations, called respectively Hermite and spline collocation, are investigated. A Hermite block-tridiagonal system for a nonuniform mesh is derived, and the Hermite approach is extended in order to develop a variable-mesh sixth-order block-tridiagonal procedure. It is shown that all results obtained by Hermite development can be recovered by appropriate spline polynomial interpolation. The additional boundary conditions required for these higher-order procedures are also given. Comparative solutions using second-order accurate finite difference and spline and Hermite formulations are presented for the boundary layer on a flat plate, boundary layers with uniform and variable mass transfer, and the viscous incompressible Navier-Stokes equations describing flow in a driven cavity.

Rubin, S. G.↗

Numerical solutions for viscous and potential flow about arbitrary two-dimensional bodies using body-fitted coordinate systems

A procedure for numerical solution of the time-dependent, incompressible Navier-Stokes equations for the flow about arbitrarily shaped two-dimensional bodies is given. This solution is based on a technique of automatic numerical generation of a curvilinear coordinate system having a coordinate line coincident with the body contour regardless of its shape. The implicit solution utilizes the vorticity-stream function formulation with a false-position iterative adjustment of the surface vorticity in satisfaction of the no-slip boundary condition. Excellent agreement with the Blasius boundary layer solution is obtained for a semi-infinite flat plate. Results are presented for Reynolds numbers up to 2000 for several airfoils and a cambered rock.

Thames, F. C.↗

An experimental investigation of a three-dimensional wall jet

An experimental investigation of the effects of a curved and flat wall surface on the flow development of an axisymmetric jet exhausting into a moving airstream has been made. Of primary concern was the comparison of the one-point statistical properties of the unconfined jet to the quantities measured in the flows over a flat plate and a curved wall surface. Quantities measured in this investigation included mean velocities in all three directions, turbulent intensities, autocorrelations, power spectral densities, and intermittencies. The investigation was confined to the near field of the turbulent jet. The curved wall (flap) was found to have a very large effect on both the mean velocity and the turbulent velocity components of the flowfield. The potential core region of the jet was found to break up most rapidly for the flow over the flap. A laser-Doppler velocimeter, using a phase locked-loop processor, was used to make the desired velocity field measurements. To determine the intermittency profiles, a laser light scattering technique was employed.

Catalano, G. D.↗

An efficient numerical method for solving the time-dependent compressible Navier-Stokes equations at high Reynolds number

A fine-mesh method incorporating two new operators, which drastically reduces the computation time, has been developed for solving the time-dependent Navier-Stokes equations at flight Reynolds numbers. The approach time-splits the equations into a hyperbolic part and a parabolic part, solves the hyperbolic part by a new explicit numerical method based on characteristics theory, and solves the parabolic part by a new efficient implicit parabolic method. The method has reduced the computation time by one and two orders of magnitude from that required previously to solve for the interaction of a shock wave with a boundary layer on a flat plate.

Maccormack, R. W.↗

Considerations in the development of a high performance per unit cost solar collector

A flat plate collector employing a mild steel, pressure-expanded absorber plate has been developed. It is capable of energy output levels commensurate with the requirements of driving an absorption refrigeration system while operating at efficiency levels in the 35-40% range. Selective absorber surfaces of black chrome over nickel and black copper over copper were analyzed and prototype collectors containing each type of absorber plating were fabricated and tested for performance. Criteria applied to the cost effectiveness analysis of the collector included both the energy output per unit area and the collector fabrication cost per unit area.

Sims, W. H.↗

Performance correlations of five solar collectors tested simultaneously outdoors

Collector thermal efficiency, and efficiency degradation with time were measured for 5 flat-plate solar collectors tested simultaneously in an outdoor solar collector test facility. Results indicate that by using collector performance parameters which account for diffuse insolation, outdoor data recorded on 'cloudy' days can be used as a measure of performance, as long as the ratio of direct to total insolation exceeds approximately 0.6. These outdoor results also show good agreement with thermal efficiency data obtained indoors in a solar simulator. Significant efficiency degradation occurred on only one of the five collectors exposed to outdoor conditions for a period of one to two years.

Miller, D. R.↗