Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

The behavior of thermal conductivity in the chaotic phase of [N(CH{sub 3}){sub 4}]{sub 2}ZnCl{sub 4} crystal

A thermal investigation of the modulated structure dynamics at the transition between metastable states in the incommensurate phase of [N(CH{sub 3}){sub 4}]{sub 2}ZnCl{sub 4} crystal have been performed. It is established that the anomalous behavior of the thermal conductivity in the absence of a defect-density wave is due to the inelastic scattering of thermal phonons from critical phonons of the soft optical branch. In the presence of a defect-density wave, the anomalous increase in thermal conductivity is caused by the existence of a chaotic phase and is related to the contribution that soft optical phonons make to the heat transfer due to the increase in their group velocity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superluminal Labview Code

This labview code is used to set the phase and amplitudes on the 72 antenna of the superluminal machine, and to map out the radiation patter from the superluminal antenna.Each antenna radiates a modulated signal consisting of two separate frequencies, in the range of 2 GHz to 2.8 GHz. The phases and amplitudes from each antenna are controlled by a pair of AD8349 vector modulators (VMs). These VMs set the phase and amplitude of a high frequency signal using a set of four DC inputs, which are controlled by Linear Technologies LTC1990 digital to analog converters (DACs). The labview code controls these DACs through an 8051 microcontroller.This code also monitors the phases and amplitudes of the 72 channels. Near each antenna, there is a coupler that channels a portion of the power into a binary network. Through a labview controlled switching array, any of the 72 coupled signals can be channeled in to the Tektronix TDS 7404 digital oscilloscope. Then the labview code takes an FFT of the signal, and compares it to the FFT of a reference signal in the oscilloscope to determine the magnitude and phase of each sideband of the signal. The code compensates for phase and amplitude errors introduced by differences in cable lengths.The labview code sets each of the 72 elements to a user determined phase and amplitude. For each element, the code runs an iterative procedure, where it adjusts the DACs until the correct phases and amplitudes have been reached.

Wheat, Robert↗

Semiconductor–metal structural phase transformation in MoTe 2 monolayers by electronic excitation

Optical modulation of the crystal structure and materials properties is an increasingly important technique for functionalization of two-dimensional and layered semiconductors, where traditional methods like chemical doping are ineffective. Controllable transformation between the semiconducting (H) and semimetallic (T') polytypes of transition metal chalcogenide monolayers is of central importance to two-dimensional electronics, and thermally-driven and strain-driven examples of this phase transformation have been previously reported. Yet, the possibility of a H–T' phase transformation driven by electronic or optical excitation is less explored and little is known about the potential energy surface and the magnitude of activation barriers or the mechanism of the phase transformation in the excited state. In this work, we model the electronic and ionic structure of excited MoTe 2 crystals and demonstrate how electronic excitation leads to a Fermi-surface-nesting driven softening of phonon modes at the Brillouin zone boundary and the subsequent stabilization of a low-energy intermediate crystal structure along the semiconductor–metal phase transition pathway. The significantly reduced barriers for this transformation upon electronic excitation suggest that optical excitation may enable rapid and controllable synthesis of lateral semiconductor–metal heterophase homojunctions in monolayer materials for use in next-generation two-dimensional nano-electronics applications.

36 MATERIALS SCIENCE↗

Beyond electrostatic modification: design and discovery of functional oxide phases via ionic-electronic doping

A new research field of functional materials and device physics is emerging that combines ionic transport with charge carrier modulation to realize emergent physical properties and discovery of metastable phases. The paradigm for enabling function extends far beyond carrier accumulation or depletion in band semiconductors or simply moving ions through an insulating electrolyte. Rather, by careful selection of electronically or structurally fragile materials, one can collapse or open band gaps via extreme ionic dopant concentration, or reconfigure their entire crystal structure to create new phases. Electron-electron and electron-lattice interactions can be coupled or controlled independently in such systems via electric fields without thermal constraints by use of ionic dopants. The unifying theme across these studies is to introduce ions and electrons via electric fields through interfaces with electrochemistry playing a dominant role. In this review, we briefly summarize this nascent field of iontronics and discuss principal results to date with examples from binary and complex oxides as well as selected 2D materials systems. Here, we conclude the review by highlighting gaps in fundamental scientific understanding and prospects for the use of such novel devices in future electronic, photonic and energy technologies.

36 MATERIALS SCIENCE↗

Visualizing heavy fermion confinement and Pauli-limited superconductivity in layered CeCoIn 5

Layered material structures play a key role in enhancing electron–electron interactions to create correlated metallic phases that can transform into unconventional superconducting states. The quasi-two-dimensional electronic properties of such compounds are often inferred indirectly through examination of bulk properties. Here we use scanning tunneling microscopy to directly probe in cross-section the quasi-two-dimensional electronic states of the heavy fermion superconductor CeCoIn 5 . Our measurements reveal the strong confined nature of quasiparticles, anisotropy of tunneling characteristics, and layer-by-layer modulated behavior of the precursor pseudogap gap phase. In the interlayer coupled superconducting state, the orientation of line defects relative to the d-wave order parameter determines whether in-gap states form due to scattering. Spectroscopic imaging of the anisotropic magnetic vortex cores directly characterizes the short interlayer superconducting coherence length and shows an electronic phase separation near the upper critical in-plane magnetic field, consistent with a Pauli-limited first-order phase transition into a pseudogap phase.

36 MATERIALS SCIENCE↗

Structural modulation and spin glassiness upon oxidation in oxygen storage material LnFeMnO 4+x for Ln = Y, Lu, and Yb

The mixed valence multiferroic LnFe 2+ Fe 3+ O 4 (where Ln = Y, Lu, and Yb) can reversibly uptake oxygen into its lattice, which is evidenced by a crystallographic phase transition along with the appearance of structural modulations. In this study, we show that the Mn-substituted version of this multiferroic can also be readily oxidized to LnFe 3+ Mn 3+ O 4.5 revealing similar oxygen storage behavior. Through neutron, electron, and synchrotron x-ray diffraction studies, we observe a structural modulation that we attribute to a displacement wave in the fully oxidized compound. This wave exhibits commensurability with a wavevector q = (-2/7, 1/7, 0). Bond valence summation analysis of plausible interstitial oxygen positions suggests that oxygen insertion likely occurs at the middle of the Fe/Mn–O bipyramid layers. The structural modulation of LnFeMnO 4.5 is two-dimensional, propagates along the ab-plane, and is highly symmetric as 12 identical modulation vectors are observed in the diffraction patterns. The nature of the lanthanide, Ln 3+ , does not seem to influence such modulations since we observe identical satellite reflections for all three samples of Ln = Y, Lu, and Yb. Both LnFeMnO 4 and LnFeMnO 4.5 display spin glassy behavior with 2D short-range magnetic ordering being observed in LnFeMnO 4 . Analysis of the neutron diffraction data reveals a correlation length of ~10 nm. Upon oxidation to LnFeMnO 4.5 , the short-range magnetic order is significantly suppressed.

36 MATERIALS SCIENCE↗

Chorus Waves Modulation of Langmuir Waves in the Radiation Belts

Using high-resolution waveforms measured by the Van Allen Probes, we report a novel observation in the radiation belts. Namely, we show that multiband, discrete, rising-tone whistler-mode chorus emissions exhibit a one-to-one correlation with Langmuir wave bursts. Moreover, the periodic Langmuir wave bursts are generally observed at the phase location where the chorus wave E || component is oriented opposite to its propagation direction. The electron measurements show a beam in phase space density at the particle velocity that matches the parallel phase velocity of the chorus waves. Based on this evidence, we conclude that the chorus waves accelerate the suprathermal electrons via Landau resonance, and generate a localized electron beam in phase space density. Consequently, the Langmuir waves are excited locally and are modulated by the chorus wave phase. As a result, this microscale interaction between chorus waves and high frequency electrostatic waves provides a new insight into the nonlinear wave-particle interaction process.

58 GEOSCIENCES↗

Phase-noise induced limitations on cooling and coherent evolution in optomechanical systems

We present a detailed theoretical discussion of the effects of ubiquitous laser noise on cooling and the coherent dynamics in optomechanical systems. Phase fluctuations of the driving laser induce modulations of the linearized optomechanical coupling as well as a fluctuating force on the mirror due to variations of the mean cavity intensity. We first evaluate the influence of both effects on cavity cooling and find that for a small laser linewidth, the dominant heating mechanism arises from intensity fluctuations. The resulting limit on the final occupation number scales linearly with the cavity intensity both under weak- and strong-coupling conditions. For the strong-coupling regime, we also determine the effect of phase noise on the coherent transfer of single excitations between the cavity and the mechanical resonator and obtain a similar conclusion. Our results show that conditions for optical ground-state cooling and coherent operations are experimentally feasible and thus laser phase noise does pose a challenge but not a stringent limitation for optomechanical systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of areal-density asymmetries on the loss of confinement and ignition threshold in inertial confinement fusion capsules

In inertial confinement fusion implosion experiments, variations in the shell areal density reduce the shell’s inertia to confine the core pressure. Distorted capsules with large areal-density modulations decompress faster than uniform capsules in the disassembly phase. A simple 3-D analytic hot-spot model is derived to include the effects of low-mode areal-density modulations in the ignition criterion. The generalized 3-D ignition criterion for low modes is shown to depend on both the harmonic mean and the arithmetic mean of the areal density. Here, the “thin spots” in the shell are shown to dominate the loss of confinement as reflected by the harmonic mean definition of areal densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of small tungsten dust grains in EAST tokamak with NDS-BOUT ++

In order to investigate the transport of small dusts as well as their evolution property along their trajectories, the NDS module is developed under the BOUT++ framework, a highly desirable C++ code package to perform parallel plasma fluid simulations with an arbitrary number of equations in three-dimensional curvilinear coordinates. Due to the severe dust ablation in fusion plasmas, the dust size would decrease from micrometer to nanometer, resulting in impurities. Small dusts in the simulations here are specified as tungsten spheres with the radii on or below the order of submicrometer. The Rayleigh limit is included in the charging process when the dust is ablated to the droplet phase. The simulation results from the NDS module show that a 200 nm radius spherical tungsten dust originated from upper divertor region of EAST Tokamak is ablated completely due to the intense heating from the incoming plasma inside the core region, well consistent with the CCD footage of EAST shot # 81459. Furthermore it is found that the magnetic field dominates the dust transport when the dust radius is below 100 nm during the ablation along the trajectory. Our simulations predict that a 10 nm radius spherical tungsten dust injected from the inner midplane is well constrained by the magnetic field, and it reaches the inner divertor target with a velocity on the order of km/s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phase diagram of two-dimensional fast-rotating ultracold fermionic atoms near unitarity

By analyzing vortex lattices, re-entrant Cooper pairing, and Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) states in a single theoretical framework, we explore how vortices and spin textures join to protect superconductivity against large magnetic fields. We use a rapidly rotating ultracold gas of fermionic atoms near unitarity as a model system amenable to experimental exploration and discover a hierarchy of spin-polarized and FFLO phases in which a metal or a band insulator of unpaired particles coexists with a spatially modulated superfluid hosting a vortex lattice. Quantum fluctuations can transform these phases into strongly correlated 'vortex-liquid' metals and insulators, respectively. We argue that vortex lattices significantly enhance the stability of FFLO states and discuss prospects for observing these states in cold-atom experiments.

36 MATERIALS SCIENCE↗

Oxygen octahedra distortion induced structural and magnetic phase transitions in Bi{sub 1−x}Ca{sub x}Fe{sub 1−x}Mn{sub x}O{sub 3} ceramics

The co-doping of Ca and Mn in respective Bi and Fe-sites of BiFeO{sub 3} lattice leads to structural transition from rhombohedral (R3c space group) to orthorhombic (Pbnm space group) crystal symmetry. The tilt angle for anti-phase rotation of the oxygen octahedra of BiFeO{sub 3} at room temperature is observed to be ∼13.8°. It decreases with the increase in the co-doping percentage which suggests the composition-driven structural phase transition. The remnant magnetization for sample with 15% of co-doping becomes about 16 times that of BiFeO{sub 3}. It may be attributed to the suppression of cycloid spin structure and uncompensated spins at the surface of nanocrystallites. Further increase in co-doping percentage results in the sharp reduction of remnant magnetization due to the dominant contribution from the collinear antiferromagnetic ordering in the Pbnm space group. The Arrott plot analysis clearly indicates the composition-driven crossover from the antiferromagnetic to weak ferromagnetic ordering and vice versa. Electron spin resonance results provide the evidence for the composition-driven phase transitions from an incommensurate spin cycloidal modulated state to one with nearly homogeneous spin order. The band gap (2.17 eV) of BiFeO{sub 3} measured using UV-Vis spectra was supported by the resonance Raman spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

User's Guide for Hysteretic Capillary Pressure and Relative Permeability Functions in TOUGH2

This document provides a user’s guide for the most recent version of the hysteretic code, which runs within iTOUGH2 (Finsterle, 1999a,b,c) or TOUGH2 V2.1 (Pruess et al., 2012). The usage of the hysteretic module is the same in both codes, which for brevity here are both referred to simply as TOUGH2. The current code differs only slightly from what was presented in Doughty (2007), hence that document provides the basic information on the processes being modeled and how they are conceptualized. This document focuses on a description of the user-specified parameters required to run hysteretic TOUGH2. In the few instances where the conceptualization differs from that of Doughty (2007), the features described here are the current ones. Sample problems presented in this user’s guide use the equation-of-state module ECO2N (Pruess, 2005). The components present in ECO2N are H{sub 2}O, NaCl, and CO{sub 2}. Two fluid phases and one solid phase are considered: an aqueous phase, which primarily consists of liquid H{sub 2}O and may contain dissolved NaCl and CO{sub 2}; a supercritical phase which primarily consists of CO{sub 2}, but also includes a small amount of gaseous H{sub 2}O; and a solid phase consisting of precipitated NaCl. Details of the ECO2N formulation may be found in Pruess (2005). The aqueous phase is the wetting phase and is denoted ‘liquid’, whereas the supercritical phase is the non-wetting phase and is denoted ‘gas’. The hysteretic formalism may be applied to other TOUGH2 equation-of-state modules that consider two fluid phases, as long as the liquid phase is the wetting phase and the gas phase is the non-wetting phase.

54 ENVIRONMENTAL SCIENCES↗

Role of phase composition for electronic states in CH{sub 3}NH{sub 3}PbI{sub 3} prepared from CH{sub 3}NH{sub 3}I/PbCl{sub 2} solution

Modulated surface photovoltage (SPV) spectra have been correlated with the phase composition in layers of CH{sub 3}NH{sub 3}PbI{sub 3} (MAPbI{sub 3}) prepared from MAI and PbCl{sub 2} and annealed at 100 °C. Depending on the annealing time, different compositions of MAPbI{sub 3}, MAPbCl{sub 3}, MACl, PbI{sub 2}, and an un-identified phase were found. It has been demonstrated that evaporation of MAI and HI is crucial for the development of electronic states in MAPbI{sub 3} and that only the appearance and evolution of the phase PbI{sub 2} has an influence on electronic states in MAPbI{sub 3}. With ongoing annealing, (i) a transition from p- to n-type doping was observed with the appearance of PbI{sub 2}, (ii) shallow acceptor states were distinguished and disappeared in n-type doped MAPbI{sub 3}, and (iii) a minimum of the SPV response related to deep defect states was found at the transition from p- to n-type doping. The results are discussed with respect to the further development of highly efficient and stable MAPbI{sub 3} absorbers for solar cells.

36 MATERIALS SCIENCE↗

A Catastrophic Charge Density Wave in BaFe 2 Al 9

Charge density waves (CDWs) are modulations of the electron density and the atomic lattice that develop in some crystalline materials at low temperatures. We report an unusual example of a CDW in BaFe 2 Al 9 below 100 K. In contrast to the canonical CDW phase transition, temperature-dependent physical properties of single crystals reveal a first-order phase transition. This is accompanied by a discontinuous change in the size of the crystal lattice. In fact, this large strain has catastrophic consequences for the crystals causing them to physically shatter. Single-crystal X-ray diffraction reveals superlattice peaks in the low-temperature phase signaling the development of a CDW lattice modulation. No similar low-temperature transitions are observed in BaFe 2 Al 9 . Electronic structure calculations provide one hint to the different behavior of these two compounds; the d-orbital states in the Fe compound are not completely filled. Iron compounds are renowned for their magnetism, and partly filled d-states play a key role. Finally, it is therefore surprising that BaFe 2 Al 9 develops a structural modulation at low temperature instead of magnetic order.

36 MATERIALS SCIENCE↗

Generation of a novel phase-space-based cylindrical dose kernel for IMRT optimization

Purpose: Improving dose calculation accuracy is crucial in intensity-modulated radiation therapy (IMRT). We have developed a method for generating a phase-space-based dose kernel for IMRT planning of lung cancer patients. Methods: Particle transport in the linear accelerator treatment head of a 21EX, 6 MV photon beam (Varian Medical Systems, Palo Alto, CA) was simulated using the EGSnrc/BEAMnrc code system. The phase space information was recorded under the secondary jaws. Each particle in the phase space file was associated with a beamlet whose index was calculated and saved in the particle's LATCH variable. The DOSXYZnrc code was modified to accumulate the energy deposited by each particle based on its beamlet index. Furthermore, the central axis of each beamlet was calculated from the orientation of all the particles in this beamlet. A cylinder was then defined around the central axis so that only the energy deposited within the cylinder was counted. A look-up table was established for each cylinder during the tallying process. The efficiency and accuracy of the cylindrical beamlet energy deposition approach was evaluated using a treatment plan developed on a simulated lung phantom. Results: Profile and percentage depth doses computed in a water phantom for an open, square field size were within 1.5% of measurements. Dose optimized with the cylindrical dose kernel was found to be within 0.6% of that computed with the nontruncated 3D kernel. The cylindrical truncation reduced optimization time by approximately 80%. Conclusions: A method for generating a phase-space-based dose kernel, using a truncated cylinder for scoring dose, in beamlet-based optimization of lung treatment planning was developed and found to be in good agreement with the standard, nontruncated scoring approach. Compared to previous techniques, our method significantly reduces computational time and memory requirements, which may be useful for Monte-Carlo-based 4D IMRT or IMAT treatment planning.

61 RADIATION PROTECTION AND DOSIMETRY↗

Determination of Thermoelectric Module Efficiency A Survey

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many thermoelectrics, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide the end-users with realistic values on how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated the lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, cross-checking among different systems often showed large errors that are likely caused by unaccounted heat loss and thermal resistance. Efficiency testing is an important area for the thermoelectric community to focus on. A follow-up international standardization effort is planned.

efficiency↗

Taming martensitic transformation via concentration modulation at nanoscale

Martensitic transformation (MT) is typically a strongly first-order transition with autocatalysis in nucleation followed by rapid growth. It usually takes place within a narrow temperature or stress range, making its utilization in a controllable manner difficult. We show by computer simulations how MTs can be tailored by concentration modulation at the nanoscale in the parent phase, which induces spatial variations of both the stability of martensite and the transformation strain and tunes the overall MT kinetics from a typical first-order transition into a high-order like continuous transition. Such a unique MT characteristic reduces or even eliminates the transformation hysteresis and produces quasi-linear elasticity with ultra-low apparent elastic modulus.

36 MATERIALS SCIENCE↗