Search NASA⌕ Search

SEARCH · Search NASA

Results for “RESISTANCE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Non-volatile electric-field control of inversion symmetry

Competition between ground states at phase boundaries can lead to significant changes in properties under stimuli, particularly when these ground states have different crystal symmetries. A key challenge is to stabilize and control the coexistence of symmetry-distinct phases. Using BiFeO 3 layers confined between layers of dielectric TbScO 3 as a model system, we stabilize the mixed-phase coexistence of centrosymmetric and non-centrosymmetric BiFeO 3 phases at room temperature with antipolar, insulating and polar semiconducting behaviour, respectively. Application of orthogonal in-plane electric (polar) fields results in reversible non-volatile interconversion between the two phases, hence removing and introducing centrosymmetry. Counterintuitively, we find that an electric field 'erases' polarization, resulting from the anisotropy in octahedral tilts introduced by the interweaving TbScO 3 layers. Consequently, this interconversion between centrosymmetric and non-centrosymmetric phases generates changes in the non-linear optical response of over three orders of magnitude, resistivity of over five orders of magnitude and control of microscopic polar order. Here our work establishes a platform for cross-functional devices that take advantage of changes in optical, electrical and ferroic responses, and demonstrates octahedral tilts as an important order parameter in materials interface design.

36 MATERIALS SCIENCE↗

Tuning electronic properties in LaNiO 3 thin films by B-site Cu-substitution

Resistors are essential parts of futuristic all-oxide electronic architectures, yet easily overlooked due to their apparent simplicity. In this study, design of thin films with specific resistance spanning six orders of magnitude by partial substitution of Cu 2+ for Ni 3+ in the metallic conductor LaNiO 3 is shown. Substitution is attainable across the whole composition range using atomic layer deposition on LaAlO 3 (100) pc substrates, however with some inclusion of Ruddlesden–Popper RP1 phase (La 2 CuO 4 ) at high levels of Cu-incorporation. The thermal stability of the resistance is based on a metal–insulator transition that evolves from non-existent for LaNiO 3 to above room-temperature for high Cu 2+ substitution. This provides further insight in the metal–insulator transition found for correlated rare-earth nickelates, especially the type of transition seen for ultrathin films of LaNiO 3 that is usually attributed to oxygen vacancy formation. Materials with variable resistivity and metal–insulator-transition temperatures are key in the design of futuristic electronics such as metal–insulator-transition-driven neuromorphic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NiFeCo-based catalysts in high current zero-gap anion exchange membrane water electrolyzers

Understanding degradation mechanisms in pure water anion exchange membrane water electrolyzers is essential for developing durable and precious metal-free hydrogen production systems, yet electronic, chemical, and transport-driven pathways often occur simultaneously at the anode. To separate these effects, we establish a morphology invariant Ni/Fe/Co thin film model catalyst platform using physical vapor deposition and systematically compare composition-dependent behavior under both pure water and 0.1 M KOH feeds. Devices were operated under industrially relevant current density conditions, galvanostatically at 1 A cm −2 for 24 hours; metal dissolution, ionomer oxidation, and resistance growth were quantified using inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy. Under pure-water operation, Ni-rich films showed voltage increases that correlated with rising total cell resistance (ΔV ≈ 243 mV, ΔR ≈ 0.17 Ω cm 2 ). Co-rich films maintained near constant voltages with minimal resistance change (ΔV < 10 mV, ΔR ≈ 0.03 Ω cm 2 ) but induced pronounced ionomer oxidation observed by XPS. In 0.1 M KOH, ionomer oxidation is suppressed, and impedance growth is minimized (<0.08 Ω cm 2 ) across all compositions, consistent with reduced transport limitations and improved ionic conduction relative to pure-water feeds. These results demonstrate how a controlled thin film model platform can isolate composition electrolyte relationships and provide mechanistic design principles for stable pure water anion exchange membrane electrolyzers.

Milenia Rojas Mendoza, B. [Stanford Univ., CA (Uni↗

High-temperature molecular beam epitaxial growth of AlGaN/GaN on GaN templates with reduced interface impurity levels

We present combined in situ thermal cleaning and intentional doping strategies near the substrate regrowth interface to produce high-quality AlGaN/GaN high electron mobility transistors on semi-insulating (0001) GaN templates with low interfacial impurity concentrations and low buffer leakage. By exposing the GaN templates to an optimized thermal dissociation step in the plasma-assisted molecular beam epitaxy environment, oxygen, carbon, and, to lesser extent, Si impurities were effectively removed from the regrowth interface under preservation of good interface quality. Residual Si was further compensated by C-doped GaN via CBr{sub 4} to yield highly resistive GaN buffer layers. Improved N-rich growth conditions at high growth temperatures were then utilized for subsequent growth of the AlGaN/GaN device structure, yielding smooth surface morphologies and low residual oxygen concentration with large insensitivity to the (Al+Ga)N flux ratio. Room temperature electron mobilities of the two-dimensional electron gas at the AlGaN/GaN interface exceeded >1750 cm{sup 2}/V s and the dc drain current reached {approx}1.1 A/mm at a +1 V bias, demonstrating the effectiveness of the applied methods.

36 MATERIALS SCIENCE↗

Measuring sub-surface spatially varying thermal conductivity of silicon implanted with krypton

The thermal properties of semiconductors following exposure to ion irradiation are of great interest for the cooling of electronic devices; however, gradients in composition and structure due to irradiation often make the measurement difficult. Furthermore, the nature of spatial variations in thermal resistances due to spatially varying ion irradiation damage is not well understood. In this work, we develop an advancement in the analysis of time-domain thermoreflectance to account for spatially varying thermal conductivity in a material resulting from a spatial distribution of defects. We then use this method to measure the near-surface (≲1 μm) thermal conductivity of silicon wafers irradiated with Kr + ions, which has an approximate Gaussian distribution centered 260 nm into the sample. Our numerical analysis presented here allows for the spatial gradient of thermal conductivity to be extracted via what is fundamentally a volumetric measurement technique. We validate our findings via transmission electron microscopy, which is able to confirm the spatial variation of the sub-surface silicon structure, and provide additional insight into the local structure resulting from the effects of ion bombardment. Thermal measurements found the ion stopping region to have a nearly 50x reduction in thermal conductivity as compared to pristine silicon, while TEM showed the region was not fully amorphized. Our results suggest this drastic reduction in silicon thermal conductivity is primarily driven by structural defects in crystalline regions along with boundary scattering between amorphous and crystalline regions, with a negligible contribution being due to implanted krypton ions themselves.

36 MATERIALS SCIENCE↗

200 mm sensor development using bonded wafers

Sensors fabricated from high resistivity, float zone, silicon material have been the basis of vertex detectors and trackers for the last 30 years. The areas of these devices have increased from a few square cm to > 200m 2 for the existing CMS tracker. High Luminosity Large Hadron Collider (HL-LHC), CMS and ATLAS tracker upgrades will each require more than 200 m 2 of silicon and the CMS High Granularity Calorimeter (HGCAL) will require more than 600 m 2 . The cost and complexity of assembly of these devices is related to the area of each module, which in turn is set by the size of the silicon sensors. In addition to large area, the devices must be radiation hard, which requires the use of sensors thinned to 200 microns or less. The combination of wafer thinning and large wafer diameter is a significant technical challenge, and is the subject of this work. In this paper we describe work on development of thin sensors on 200 mm wafers using wafer bonding technology. Results of development runs with float zone, Silicon-on-Insulator and Silicon-Silicon bonded wafer technologies are reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Metallicity of 2H-MoS 2 induced by Au hybridization

Recent studies have shown that MoS 2 can undergo a structural phase transition from the 2H to 1T' phase on Au substrates at moderate temperatures. In this study, we use ultraviolet and x-ray photoelectron spectroscopy, Raman and photoluminescence spectroscopy, and scanning tunneling microscopy/spectroscopy to probe the impact of annealing exfoliated, monolayer MoS 2 on Au. Our results across multiple length scales indicate that 2H-MoS 2 becomes hybridized with Au upon thermal annealing without inducing the 1T' structural phase and the bandgap can be modulated to zero width depending on the degree of hybridization. These results can be used to control the resistance of metal-MoS 2 contacts at the atomic scale without introduction of defects or structural phase transitions and are important for devices such as memristors.

36 MATERIALS SCIENCE↗

Two-Step Annealing Study of Cuprous Oxide for Photovoltaic Applications

In this report the properties of large grain cuprous oxide (Cu 2 O) foils are explored after the implementation of a controlled postgrowth annealing process. P-type foils with a wide range of carrier density are demonstrated, enabling a promising processing window for wide bandgap solar cell devices. Hall measurements at room temperature show increased majority carrier concentration after nitrogen annealing and a reduction in mobility. The progressive change in resistivity with annealing temperature is shown, with values approaching 100 Ω·cm. Carrier recombination, measured by microwave photoconductance decay, shows a discrete change upon annealing.

14 SOLAR ENERGY↗

Effect of nanoscale tin-dioxide layers on the efficiency of CdS/CdTe-based film solar elements

Comparative investigations of the output parameters and optical diode characteristics of ITO/CdS/CdTe/Cu/Au and SnO{sub 2}: F/CdS/CdTe/Cu/Au film solar cells are carried out with the aim of optimizing the design of the front electrodes. It is established that the high voltage and large filling factor of the solar elements with SnO{sub 2}: F films are caused by a lower diode saturation current density and series resistance due to the stability of the crystal structure and electrical properties of these films against chloride treatment of the base layer during device fabrication. At the same time, solar elements with an ITO front electrode exhibit a higher short-circuit current density due to the larger average light transmittance of the ITO layers. The use of nanoscale SnO{sub 2} layers in the ITO front contacts allows the efficiency of the CdS/CdTe-based solar elements to be enhanced to 11.4% on account of stabilization of the crystal structure and electrical properties of the ITO films and a possible reduction in the cadmium-sulphide-layer thickness without shunting the device structure.

36 MATERIALS SCIENCE↗

Development of thinned silicon sensors on 8” wafers (CRADA FRA-2015-0015 Final Report)

Sensors fabricated from high resistivity, float zone, silicon material have been the basis of vertex detectors and trackers for the last 30 years. The areas of these devices have increased from a few square cm to >200 m 2 for the existing CMS tracker. CMS and ATLAS upgrades will each require more than 200 m 2 of silicon and the CMS High Granularity Calorimeter (HGC) will require more than 600 m 2 . Cost and complexity of assembly of these devices is related to the area of each module, which in turn is set by the area of the silicon sensors. A move from 4” and 6” wafers (the only sizes currently available) to 8” diameter in volume production has the potential for savings of tens of millions of dollars in the detector upgrade programs at the Large Hadron Collider (LHC) and future experiments. In addition to large area, the devices must be radiation hard, which can be achieved by the use of sensors thinned to 200 microns or less. The combination of wafer thinning and large wafer diameter is a significant technical challenge, and is the subject of this work.

43 PARTICLE ACCELERATORS↗

Circuit model for the inverse Z-pinch wire array switch.

A 0D circuit code is introduced to study the wire array switch concept introduced in. It has been implemented and researched at Imperial College. An exploding wire array, the switch, is in parallel with the load, an imploding wire array. Most of the current flows in the exploding array until it expands and becomes highly resistive. The 0D code contains simple models of Joule energy deposition and plasma expansion for W and Al wires. The purpose of the device is to produce fast Z-pinch implosion, below 100ns on MAGPIE and the Sandia Z machine. Self and mutual inductances are taken into consideration as well as the rocket model for wire ablation. The switch characteristics of the exploding array are prescribed and tuned up to agree with MAGPIE shots. The dependence of the device on the configuration of the arrays is studied and scaling to ZR conditions is explored.

33 ADVANCED PROPULSION SYSTEMS↗

Ohmic Contacts to Europium Oxide for Spintronic Devices

A technique for in situ fabrication of aluminum-based Ohmic contacts to EuO by molecular-beam epitaxy is proposed. These contacts have a linear current–voltage curve and a contact resistance of 0.55 Ω mm and are stable in air. This suggests that the proposed technique holds promise for spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin injection by spin–charge coupling in proximity induced magnetic graphene

Abstract Within the field of spintronics major efforts are directed towards developing applications for spin-based transport devices made fully out of two-dimensional materials. In this work we present an experimental realization of a spin-valve device where the generation of the spin signal is exclusively attributed to the spin-dependent conductivity of the magnetic graphene resulting from the proximity of an interlayer antiferromagnet, chromium sulfide bromide (CrSBr). We clearly demonstrate that the usage of the conventional air-sensitive 3D magnetic contacts can be fully avoided when graphene/CrSBr heterostructures are employed. Moreover, apart from providing exceptionally long spin relaxation length, the usage of graphene for both generation and transport of the spin allows to automatically avoid the conductivity mismatch between the source and the channel circuits that has to be considered when using conventional low-resistive contacts. Our results address a necessary step in the engineering of spintronic circuitry out of layered materials and precede further developments in the area of complex spin-logic devices. Moreover, we introduce a fabrication procedure where we designed and implemented a recipe for the preparation of electrodes via a damage-free technique that offers an immediate advantage in the fields of air-sensitive and delicate organic materials.

36 MATERIALS SCIENCE↗

Blue fluorescent organic light emitting diodes with multilayered graphene anode

As an innovative anode for organic light emitting devices (OLEDs), we have investigated graphene films. Graphene has importance due to its huge potential in flexible OLED applications. In this work, graphene films have been catalytically grown and transferred to the glass substrate for OLED fabrications. We have successfully fabricated 2 mm × 2 mm device area blue fluorescent OLEDs with graphene anodes which showed 2.1% of external quantum efficiency at 1000 cd/m{sup 2}. This is the highest value reported among fluorescent OLEDs using graphene anodes. Oxygen plasma treatment on graphene has been found to improve hole injections in low voltage regime, which has been interpreted as oxygen plasma induced work function modification. However, plasma treatment also increases the sheet resistance of graphene, limiting the maximum luminance. In summary, our works demonstrate the practical possibility of graphene as an anode material for OLEDs and suggest a processing route which can be applied to various graphene related devices.

36 MATERIALS SCIENCE↗

Atomically layer-by-layer diffusion of oxygen/hydrogen in highly epitaxial PrBaCo{sub 2}O{sub 5.5+δ} thin films

Single-crystalline epitaxial thin films of PrBaCo{sub 2}O{sub 5.5+δ} (PrBCO) were prepared, and their resistance R(t) under a switching flow of oxidizing and reducing gases were measured as a function of the gas flow time t in the temperature range of 200–800 °C. During the oxidation cycle under O{sub 2}, the PrBCO films exhibit fast oscillations in their dR(t)/dt vs. t plots, which reflect the oxidation processes, Co{sup 2+}/Co{sup 3+} → Co{sup 3+} and Co{sup 3+} → Co{sup 3+}/Co{sup 4+}, that the Co atoms of PrBCO undergo. Each oscillation consists of two peaks, with larger and smaller peaks representing the oxygen/hydrogen diffusion through the (BaO)(CoO{sub 2})(PrO)(CoO{sub 2}) layers of PrBCO via the oxygen-vacancy-exchange mechanism. This finding paves a significant avenue for cathode materials operating in low-temperature solid-oxide-fuel-cell devices and for chemical sensors with wide range of operating temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Models of resistive wall tearing mode disruptions

Disruptions are a serious issue in tokamaks. In a disruption, the thermal energy is lost by means of an instability which could be a resistive wall tearing mode (RWTM). During precursors to a disruption, the plasma edge region cools, causing the current to contract. Model sequences of contracted current equilibria are given, and their stability is calculated. A linear stability study shows that there is a maximum value of edge q a ≈ 3 for RWTMs to occur. Further, this also implies a minimum rational surface radius normalized to plasma radius from RWTMs to be unstable. Nonlinear simulations are performed using a similar model sequence derived from an equilibrium reconstruction. There is a striking difference in the results, depending on whether the wall is ideal or resistive. With an ideal wall, the perturbations saturate at moderate amplitude, causing a minor disruption without a thermal quench. With a resistive wall, there is a major disruption with a thermal quench, if the edge q a ≤ 3. There is a sharp transition in nonlinear behavior at q a = 3. This is consistent with the linear model and with experiments. If disruptions are caused by RWTMs, then devices with highly conducting walls, such as the International Tokamak Experimental Reactor will experience much milder, tolerable, disruptions than presently predicted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exchange coupling in $\mathrm{Bi_2}$ $\mathrm{Se_3}$ / $\mathrm{EuSe}$ heterostructures and evidence of interfacial antiferromagnetic order formation

Spatial confinement of electronic topological surface states (TSSs) in topological insulators poses a formidable challenge because TSSs are protected by time-reversal symmetry. In previous works formation of a gap in the electronic spectrum of TSSs has been successfully demonstrated in topological insulator/magnetic material heterostructures, where ferromagnetic exchange interactions locally lift the time-reversal symmetry. Here we report experimental evidence of exchange interaction between a topological insulator $\mathrm{Bi_2}$ $\mathrm{Se_3}$ and a magnetic insulator EuSe. Spin-polarized neutron reflectometry reveals a reduction of the in-plane magnetic susceptibility within a 2 nm interfacial layer of EuSe, and the combination of superconducting quantum interference device (SQUID) magnetometry and Hall measurements points to the formation of an interfacial layer with a suppressed net magnetic moment. This suppressed magnetization survives up to temperatures five times higher than the Néel temperature of EuSe. Its origin is attributed to the formation of an interfacial antiferromagnetic state. Abrupt resistance changes observed in high magnetic fields are consistent with antiferromagnetic domain reconstruction affecting transport in a TSS via exchange coupling. Importantly, the high-temperature local control of TSSs with zero net magnetization unlocks new opportunities for the design of electronic, spintronic, and quantum computation devices, ranging from quantization of Hall conductance in zero fields to spatial localization of non-Abelian excitations in superconducting topological qubits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gd-doped BaSnO{sub 3}: A transparent conducting oxide with localized magnetic moments

We have synthesized transparent, conducting, paramagnetic stannate thin films via rare-earth doping of BaSnO{sub 3}. Gd{sup 3+} (4f{sup 7}) substitution on the Ba{sup 2+} site results in optical transparency in the visible regime, low resistivities, and high electron mobilities, along with a significant magnetic moment. Pulsed laser deposition was used to stabilize epitaxial Ba{sub 0.96}Gd{sub 0.04}SnO{sub 3} thin films on (001) SrTiO{sub 3} substrates, and compared with Ba{sub 0.96}La{sub 0.04}SnO{sub 3} and undoped BaSnO{sub 3} thin films. Gd as well as La doping schemes result in electron mobilities at room temperature that exceed those of conventional complex oxides, with values as high as 60 cm{sup 2}/V·s (n = 2.5 × 10{sup 20 }cm{sup −3}) and 30 cm{sup 2}/V·s (n = 1 × 10{sup 20 }cm{sup −3}) for La and Gd doping, respectively. The resistivity shows little temperature dependence across a broad temperature range, indicating that in both types of films the transport is not dominated by phonon scattering. Gd-doped BaSnO{sub 3} films have a strong magnetic moment of ∼7 μ{sub B}/Gd ion. Such an optically transparent conductor with localized magnetic moments may unlock opportunities for multifunctional devices in the design of next-generation displays and photovoltaics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗