Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative Motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Constituent Data Assimilation: Challenges and Limitations

The assimilation of observations of atmospheric constituents naturally divides into two major pieces. The first is the assimilation of trace gases whose variability is related to atmospheric motions. The second is the assimilation of trace gases which are sharply influenced by chemical exchange between different constituents. In order to advance beyond the initial successes of explorative investigation of assimilation techniques, tremendous challenges must be met to improve the geophysical integrity of assimilated data products. A subject of special interest is ozone near the tropopause. At the tropopause the information from both the observations and the model simulation becomes most uncertain. However a number of important geophysical parameters, e.g. stratosphere-troposphere exchange and tropospheric ozone, require the assimilation to have high accuracy at the tropopause. This talk will review the current status of the quality of assimilated data products near the tropopause, what must be done to improve the assimilation near the tropopause, and the intrinsic limitations that will require additional sources of information in order for the field to advance.

Rood, Richard B.↗

A Sub-filter Scale Noise Equation far Hybrid LES Simulations

Hybrid LES/subscale modeling approaches have an important advantage over the current noise prediction methods in that they only involve modeling of the relatively universal subscale motion and not the configuration dependent larger scale turbulence . Previous hybrid approaches use approximate statistical techniques or extrapolation methods to obtain the requisite information about the sub-filter scale motion. An alternative approach would be to adopt the modeling techniques used in the current noise prediction methods and determine the unknown stresses from experimental data. The present paper derives an equation for predicting the sub scale sound from information that can be obtained with currently available experimental procedures. The resulting prediction method would then be intermediate between the current noise prediction codes and previously proposed hybrid techniques.

Goldstein, Marvin E.↗

A Hybrid RANS/LES Approach for Predicting Jet Noise

Hybrid acoustic prediction methods have an important advantage over the current Reynolds averaged Navier-Stokes (RANS) based methods in that they only involve modeling of the relatively universal subscale motion and not the configuration dependent larger scale turbulence. Unfortunately, they are unable to account for the high frequency sound generated by the turbulence in the initial mixing layers. This paper introduces an alternative approach that directly calculates the sound from a hybrid RANS/LES flow model (which can resolve the steep gradients in the initial mixing layers near the nozzle lip) and adopts modeling techniques similar to those used in current RANS based noise prediction methods to determine the unknown sources in the equations for the remaining unresolved components of the sound field. The resulting prediction method would then be intermediate between the current noise prediction codes and previously proposed hybrid noise prediction methods.

Goldstein, Marvin E.↗

Simulations of Instabilities in Complex Valve and Feed Systems

CFD analyses are playing an increasingly important role in identifying and characterizing flow induced instabilities in rocket engine test facilities and flight systems. In this paper, we analyze instability mechanisms that range from turbulent pressure fluctuations due to vortex shedding in structurally complex valve systems to flow resonance in plug cavities to large scale pressure fluctuations due to collapse of cavitation induced vapor clouds. Furthermore, we discuss simulations of transient behavior related to valve motion that can serve as guidelines for valve scheduling. Such predictions of valve response to varying flow conditions is of crucial importance to engine operation and testing.

Ahuja, Vineet↗

A Method for and Issues Associated with the Determination of Space Suit Joint Requirements

In the design of a new space suit it is necessary to have requirements that define what mobility space suit joints should be capable of achieving in both a system and at the component level. NASA elected to divide mobility into its constituent parts-range of motion (ROM) and torque- in an effort to develop clean design requirements that limit subject performance bias and are easily verified. Unfortunately, the measurement of mobility can be difficult to obtain. Current technologies, such as the Vicon motion capture system, allow for the relatively easy benchmarking of range of motion (ROM) for a wide array of space suit systems. The ROM evaluations require subjects in the suit to accurately evaluate the ranges humans can achieve in the suit. However, when it comes to torque, there are significant challenges for both benchmarking current performance and writing requirements for future suits. This is reflected in the fact that torque definitions have been applied to very few types of space suits and with limited success in defining all the joints accurately. This paper discussed the advantages and disadvantages to historical joint torque evaluation methods, describes more recent efforts directed at benchmarking joint torques of prototype space suits, and provides an outline for how NASA intends to address joint torque in design requirements for the Constellation Space Suit System (CSSS).

Matty, Jennifer E.↗

The Role of Geometry in Magnetic Reconnection

Magnetic reconnection is arguably the most effective energy conversion and transport process in plasmas. Reconnection is subject to topological considerations in two ways. First, the process itself involves a change in topology of the combined plasma-magnetic field system. This change in topology transcends that of the magnetic field alone and accounts for flux transport relative to the motion of the plasma in the system under investigation. The second way topology is important to magnetic reconnection is through modifications of the diffUSion/dissipation physics brought about by the structure of the reconnecting system. This presentation will present an overview and summary of both past and recent results pertaining to both aspects.

Hesse, Michael↗

Development and Validation of Linear Alternator Models for the Advanced Stirling Convertor

Two models of the linear alternator of the Advanced Stirling Convertor (ASC) have been developed using the Sage 1-D modeling software package. The first model relates the piston motion to electric current by means of a motor constant. The second uses electromagnetic model components to model the magnetic circuit of the alternator. The models are tuned and validated using test data and compared against each other. Results show both models can be tuned to achieve results within 7% of ASC test data under normal operating conditions. Using Sage enables the creation of a complete ASC model to be developed and simulations completed quickly compared to more complex multi-dimensional models. These models allow for better insight into overall Stirling convertor performance, aid with Stirling power system modeling, and in the future support NASA mission planning for Stirling-based power systems.

Linear Alternators↗

Development and Validation of Linear Alternator Models for the Advanced Stirling Convertor

Two models of the linear alternator of the Advanced Stirling Convertor (ASC) have been developed using the Sage 1-D modeling software package. The first model relates the piston motion to electric current by means of a motor constant. The second uses electromagnetic model components to model the magnetic circuit of the alternator. The models are tuned and validated using test data and also compared against each other. Results show both models can be tuned to achieve results within 7 of ASC test data under normal operating conditions. Using Sage enables the creation of a complete ASC model to be developed and simulations completed quickly compared to more complex multi-dimensional models. These models allow for better insight into overall Stirling convertor performance, aid with Stirling power system modeling, and in the future support NASA mission planning for Stirling-based power systems.

Linear Alternators↗

Time Dependence of Collision Probabilities During Satellite Conjunctions

The NASA Conjunction Assessment Risk Analysis (CARA) team has recently implemented updated software to calculate the probability of collision (P (sub c)) for Earth-orbiting satellites. The algorithm can employ complex dynamical models for orbital motion, and account for the effects of non-linear trajectories as well as both position and velocity uncertainties. This “3D P (sub c)” method entails computing a 3-dimensional numerical integral for each estimated probability. Our analysis indicates that the 3D method provides several new insights over the traditional “2D P (sub c)” method, even when approximating the orbital motion using the relatively simple Keplerian two-body dynamical model. First, the formulation provides the means to estimate variations in the time derivative of the collision probability, or the probability rate, R (sub c). For close-proximity satellites, such as those orbiting in formations or clusters, R (sub c) variations can show multiple peaks that repeat or blend with one another, providing insight into the ongoing temporal distribution of risk. For single, isolated conjunctions, R (sub c) analysis provides the means to identify and bound the times of peak collision risk. Additionally, analysis of multiple actual archived conjunctions demonstrates that the commonly used “2D P (sub c)” approximation can occasionally provide inaccurate estimates. These include cases in which the 2D method yields negligibly small probabilities (e.g., P (sub c)) is greater than 10 (sup -10)), but the 3D estimates are sufficiently large to prompt increased monitoring or collision mitigation (e.g., P (sub c) is greater than or equal to 10 (sup -5)). Finally, the archive analysis indicates that a relatively efficient calculation can be used to identify which conjunctions will have negligibly small probabilities. This small-P (sub c) screening test can significantly speed the overall risk analysis computation for large numbers of conjunctions.

Hall, Doyle T.↗

The Convective Nature of the Tropical Cyclone Lifecycle via GLM and GPM Observations

This study examines the convective nature of the tropical cyclone (TC) lifecycle from tropical storm through extratropical transition. We analyze lightning observations collected from the Geostationary Lightning Mapper (GLM) on the GOES-16 satellite in combination with coincident passive microwave and Ku-band radar observations collected from Global Precipitation Measurement (GPM) mission satellites. A unique aspect of this study, which spans the Atlantic basin hurricane seasons 2018-2020, is that it provides the first known total lightning observations in TCs throughout their extratropical (ET) transition. Analysis of Tropical Storm (TS), Category 1-2 hurricanes (CAT12), Category 3-5 hurricanes (CAT35), and ET time periods, which are grouped by storm-motion and shear-relative characteristics, show that lightning maxima generally occur regimes of down-motion (up-shear), consistent (inconsistent) with previous studies. Further analysis also breaks down time periods by geographic location (e.g., land, coast, ocean) and shear strength; shifting lightning patterns are observed with increasing shear. The lightning maxima are also generally collocated with minima in 37-GHz brightness temperature observations, which is indicative of precipitation-sized ice. DPR Ku-band reflectivity profiles from the GPM Precipitation Feature (PF) database exhibit distinct differences in depth and intensity for electrically active PFs vs those that are not. On average, PFs defined by a rain rate threshold are larger for hurricane strength ITPs (CAT12, CAT35) as compared to either TS or ET ITPs. This indicates that during the hurricane strength ITPs, PFs may be capturing the entire, symmetric rain shield.

hurricane↗

The motion of the earth-moon system in modern tabular ephemerides. II - Inertial motion, mean longitude of the sun, and general precession in longitude

Properties of astronomical time scales (ET and UT) are considered, with particular emphasis on correctly determining of-date longitude as the sum of inertial mean longitude of the sun relative to the mean equinox of a fixed epoch (1950.0), and the general precession in longitude accumulated since the epoch. The inertial mean longitude and motion (relative to the mean equinox) are derived from tabular ephemerides such as the Jet Propulsion Laboratories' DE 102 and DE 96, by comparisons with subroutines based on Newcomb's perturbation theory. An unresolved inconsistency of approximately 1 second per century among the mean inertial motion of DE 102, IAU precession speed (1976), and the classical Newcomb of-date mean motion is found. Interpretation difficulties arising from the use of different systems of Ephemeris Time are also discussed.

Stumpff, P.↗

Development of the Lunar and Solar Perturbations in the Motion of an Artificial Satellite

Problems relating to the influence of lunar and solar perturbations on the motion of artificial satellites are analyzed by an extension of Cayley's development of the perturbative function in the lunar theory. In addition, the results are modified for incorporation into the Hansen-type theory used by the NASA Space Computing Center. The theory is applied to the orbits of the Vanguard I and Explorer VI satellites, and the results of detailed computations for these satellites are given together with a physical description of the perturbations in terms of resonance effects.

Musen, P.↗

Instantaneous heat transfer coefficient based upon two-dimensional analyses of Stirling space engine components

Twelve different cases of multidimensional models of Stirling engine components for space applications have been numerically investigated for oscillating, incompressible laminar flow with heat transfer. The cases studied covered wide ranges of Valensi number (from 44 to 700), Re(max) number (from 8250 to 60,000), and relative amplitude of fluid motion of 0.686 and 1.32. The Nusselt numbers obtained from the present study indicate a very complex shape with respect to time and axial location in the channel. The results indicate that three parameters can be used to define the local Nusselt number variation, namely: time average, amplitude, and phase angle. These parameters could be correlated respectively using: Re(max), Va and Re(max), and the relative amplitude of fluid motion.

Ibrahim, Mounir↗

The Vestibular System and Human Dynamic Space Orientation

The motion sensors of the vestibular system are studied to determine their role in human dynamic space orientation and manual vehicle control. The investigation yielded control models for the sensors, descriptions of the subsystems for eye stabilization, and demonstrations of the effects of motion cues on closed loop manual control. Experiments on the abilities of subjects to perceive a variety of linear motions provided data on the dynamic characteristics of the otoliths, the linear motion sensors. Angular acceleration threshold measurements supplemented knowledge of the semicircular canals, the angular motion sensors. Mathematical models are presented to describe the known control characteristics of the vestibular sensors, relating subjective perception of motion to objective motion of a vehicle. The vestibular system, the neck rotation proprioceptors and the visual system form part of the control system which maintains the eye stationary relative to a target or a reference. The contribution of each of these systems was identified through experiments involving head and body rotations about a vertical axis. Compensatory eye movements in response to neck rotation were demonstrated and their dynamic characteristics described by a lag-lead model. The eye motions attributable to neck rotations and vestibular stimulation obey superposition when both systems are active. Human operator compensatory tracking is investigated in simple vehicle orientation control system with stable and unstable controlled elements. Control of vehicle orientation to a reference is simulated in three modes: visual, motion and combined. Motion cues sensed by the vestibular system through tactile sensation enable the operator to generate more lead compensation than in fixed base simulation with only visual input. The tracking performance of the human in an unstable control system near the limits of controllability is shown to depend heavily upon the rate information provided by the vestibular sensors.

VESTIBULAR APPARATUS↗

Cosmology with moving bimetric fluids

We study cosmological implications of bigravity and massive gravity solutions with non-simultaneously diagonal metrics by considering the generalized Gordon and Kerr-Schild ansatzes. The scenario that we obtain is equivalent to that of General Relativity with additional non-comoving perfect fluids. We show that the most general ghost-free bimetric theory generates three kinds of effective fluids whose equations of state are fixed by a function of the ansatz. Different choices of such function allow to reproduce the behaviour of different dark fluids. In particular, the Gordon ansatz is suitable for the description of various kinds of slowly-moving fluids, whereas the Kerr-Schild one is shown to describe a null dark energy component. The motion of those dark fluids with respect to the CMB is shown to generate, in turn, a relative motion of baryonic matter with respect to radition which contributes to the CMB anisotropies. CMB dipole observations are able to set stringent limits on the dark sector described by the effective bimetric fluid.

79 ASTRONOMY AND ASTROPHYSICS↗

Structural optimization of large ocean-going structures

Ocean-going vehicles and platforms are among the largest structures in the world and are subjected to relatively harsh conditions of motions and loads. Some of them, such as semi-submersible platforms, are a relatively new type of structure and hence there is no formal, well evolved and established structural design code as there is for more traditional structures. More recently, efforts have also been made to develop a design method of this type for ships and other ocean structures. One of the many advantages of a rationally based design method is versatility; it can be used for structures that have widely differing purposes, measures of merit, shapes and sizes. The purpose is to describe a rationally based design method that has been developed within the field of ocean structures, in order that persons dealing with other types of structure can judge whether and to what extent its various features may be useful for those other types. Also, even though some features may not be applicable they might stimulate some useful ideas.

Hughes, O. F.↗

Understanding ice cloud-precipitation properties of three modes of mesoscale convective systems during PECAN

This study analyzes the precipitation and ice cloud microphysical features of three common modes of linear mesoscale convective systems (MCSs) during the Plains Elevated Convection at Night (PECAN) campaign. Three cases, one for each linear MCS archetype (trailing stratiform (TS), leading stratiform (LS), and parallel stratiform (PS) precipitation), are selected. We focus primarily on analyzing ice cloud microphysical properties and precipitation rates over the classified convective core (CC) and stratiform rain (SR) regions, as well as the two stratiform regions that developed behind (SR1) and ahead (SR2) of the convective line relative to the storm motion. In the three selected cases, the ice water path (IWP) and precipitation rate (PR) have strong correlations in the CC, but not in the SR. In terms of the temporal evolution of the mean IWPs and PRs, both CC and SR IWPs, as well as CC PRs, reach peaks quickly, but take a longer time to dissipate than the increase period. For all three cases, both SR1 and SR2 IWPs are 20-70% of their corresponding CC values in both the LS and PS cases, and up to 95% for the TS case, while all of their PRs are only 7-25% of their CC values. These values suggest that the SR PRs may not only depend on IWPs, but also that the microphysical properties of ice particles such as habit and size distribution may play an important role. Utilizing cloud resolving simulations of these systems may provide better understanding of the physical meanings behind the results in the future.

Cui, Wenjun↗

NMR spin relaxation in proteins: The patterns of motion that dissipate power to the bath

We developed in recent years the two-body coupled-rotator slowly relaxing local structure (SRLS) approach for the analysis of NMR relaxation in proteins. The two bodies/rotators are the protein (diffusion tensor D{sub 1}) and the spin-bearing probe, e.g., the {sup 15}N−{sup 1}H bond (diffusion tensor, D{sub 2}), coupled by a local potential (u). A Smoluchowski equation is solved to yield the generic time correlation functions (TCFs), which are sums of weighted exponentials (eigenmodes). By Fourier transformation one obtains the generic spectral density functions (SDFs) which underlie the experimental relaxation parameters. The typical paradigm is to characterize structural dynamics in terms of the best-fit values of D{sub 1}, D{sub 2}, and u. Additional approaches we pursued employ the SRLS TCFs, SDFs, or eigenmodes as descriptors. In this study we develop yet another perspective. We consider the SDF as function of the angular velocity associated with the fluctuating fields underlying NMR relaxation. A parameter called j-fraction, which represents the relative contribution of eigenmode, i, to a given value of the SDF function at a specific frequency, ω, is defined. j-fraction profiles of the dominant eigenmodes are derived for 0 ≤ ω ≤ 10{sup 12} rad/s. They reveal which patterns of motion actuate power dissipation at given ω-values, what are their rates, and what is their relative contribution. Simulations are carried out to determine the effect of timescale separation, D{sub 1}/D{sub 2}, axial potential strength, and local diffusion axiality. For D{sub 1}/D{sub 2} ≤ 0.01 and strong local potential of 15 k{sub B}T, power is dissipated by global diffusion, renormalized (by the strong potential) local diffusion, and probe diffusion on the surface of a cone (to be called cone diffusion). For D{sub 1}/D{sub 2} = 0.1, power is dissipated by mixed eigenmodes largely of a global-diffusion-type or cone-diffusion-type, and a nearly bare renormalized-local-diffusion eigenmode. For D{sub 1}/D{sub 2} > 0.1, most eigenmodes are of a mixed type. The analysis is affected substantially by reducing the potential strength from 15 to 5 k{sub B}T, and/or allowing for axial D{sub 2} with D{sub 2,∥}/D{sub 2,⊥} = 10. The scheme developed is applied to {sup 15}N−{sup 1}H relaxation from the β-sheet residue K19 and the α-helix residue A34 of the third immunoglobulin-binding domain of streptococcal protein G. Previous studies revealed rhombic local potentials with different rhombicity around C{sub i−1}{sup α}−C{sub i}{sup α}, and different timescale separation (0.047 for K19 and 0.102 for A34). Here, we find that K19 and A34 dissipate power to the bath through global diffusion, mixed cone-diffusion-related and mixed renormalized-local-diffusion-related motions. At small ω-values, A34 is more effective than K19 in dissipating power. In general, it executes faster cone-diffusion-type, and slower renormalized-local-diffusion-type and local-probe-fluctuation-type motions. K19 experiences faster N−H fluctuations than A34. Eigenmode clustering, experienced by K19 to a larger extent, is observed in the fast-probe-fluctuation regime. New information on the effect of the structural context on N−H bond dynamics has been obtained. The patterns of motion that dissipate NMR-relaxation-related power illuminate protein dynamics from a new perspective. They constitute yet another qualifier of N−H bond dynamics. This study sets the stage for developing ways for enhancing the contribution of desired pathways for power dissipation at selected angular velocities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗