Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUPERCONDUCTING MAGNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Test of spatial isotropy using a cryogenic torsion pendulum

Motion of the earth through the cosmic neutrino background, or through certain kinds of vacuum states, produces a term of the form g(sigma) x v in the energy of an electron. To search for such a term, a cryogenic torsion pendulum carrying a transversely polarized magnet was used. Superconducting shields reduced magnetic torques. A sigma x v term would produce a sinusoidal oscillation of the pendulum with a period of one sidereal day. Such an oscillation was not detected, and a new limit of 8.5 x 10 to the -18th eV has been set for the splitting of the spin states of an electron at rest on the earth.

Phillips, Peter R.↗

Field polarity dependent nucleation of superconductivity in quasi-one-dimensional magnetic templates.

We investigate the nucleation of superconductivity in an Al/Al{sub 2}O{sub 3}/Py trilayer system by electrical transport measurements. Magnetic force microscopy images taken at room temperature show that the 0.7 {micro}m thick Py-film form stripes of magnetic domains with alternating out-of-plane stray field. After applying a strong out of plane magnetic field H the superconductor/normal phase boundary becomes asymmetric with respect to H = 0. This lack of field polarity symmetry results from the unbalanced size distribution of domains with opposite polarity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A superconducting large-angle magnetic suspension

The component technologies were developed required for an advanced control moment gyro (CMG) type of slewing actuator for large payloads. The key component of the CMG is a large-angle magnetic suspension (LAMS). The LAMS combines the functions of the gimbal structure, torque motors, and rotor bearings of a CMG. The LAMS uses a single superconducting source coil and an array of cryoresistive control coils to produce a specific output torque more than an order of magnitude greater than conventional devices. The designed and tested LAMS system is based around an available superconducting solenoid, an array of twelve room-temperature normal control coils, and a multi-input, multi-output control system. The control laws were demonstrated for stabilizing and controlling the LAMS system.

Downer, James↗

Quantitative magnetic force microscopy using calibration on superconducting flux quanta

We present a new procedure that takes advantage of the magnetic flux quantization of superconducting vortices to calibrate the magnetic properties of tips for magnetic force microscopy (MFM). Indeed, a superconducting vortex, whose quantized flux is dependent upon Plank constant, speed of light and electron charge, behaves as a very well defined magnetic reference object. The proposed calibration procedure has been tested on new and worn tips and shows that the monopole point-like approximation of the probe is a reliable model. This procedure has been then applied to perform quantitative MFM experiments on a soft ferromagnetic thin film of permalloy, leading to the determination of the local out-of-plane component of the canted magnetization, together with its spatial variations across a few μm 2 scan area.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum Engineering With Hybrid Magnonic Systems and Materials (Invited Paper)

Quantum technology has made tremendous strides over the past two decades with remarkable advances in materials engineering, circuit design and dynamic operation. In particular, the integration of different quantum modules has benefited from hybrid quantum systems, which provide an important pathway for harnessing the different natural advantages of complementary quantum systems and for engineering new functionalities. This review focuses on the current frontiers with respect to utilizing magnetic excitations or magnons for novel quantum functionality. Magnons are the fundamental excitations of magnetically ordered solid-state materials and provide great tunability and exibility for interacting with various quantum modules for integration in diverse quantum systems. The concomitant rich variety of physics and material selections enable exploration of novel quantum phenomena in materials science and engineering. In addition, the relative ease of generating strong coupling and forming hybrid dynamic systems with other excitations makes hybrid magnonics a unique platform for quantum engineering. We start our discussion with circuit-based hybrid magnonic systems, which are coupled with microwave photons and acoustic phonons. Subsequently, we are focusing on the recent progress of magnon-magnon coupling within confined magnetic systems. Next we highlight new opportunities for understanding the interactions between magnons and nitrogen-vacancy centers for quantum sensing and implementing quantum interconnects. Lastly, we focus on the spin excitations and magnon spectra of novel quantum materials investigated with advanced optical characterization.

42 ENGINEERING↗

Two examples of in-flight spin flippers

In precise experiments with polarized beam it’s very often appear a necessity to change beam polarization on opposite. If such operation does not change other beam parameters, it helps to avoid or minimize some systematic errors. It is especially important in experiments, where spin dependent effect is small enough. This paper describes two set of equipments, that make spin flip for extracted beams. In both cases, these devices are absolutely distinct, because they are appropriate for different particles and at different energy range. The first of them is intended for future muon (g-2) experiment, which is under preparation now at JPARC. Here, the muon spin flip will be done by chain of electrostatic and magnetic bends at the kinetic energy 340 keV. A beam matching is provided by a number of short solenoids. The other flipper (or Siberian snake) will rotate spin of protons or antiprotons, which come from Λ-meson decay with the energy up to 40 GeV. This experiment (no. 24) is planed at IHEP, Protvino. In this case, two superconducting helical magnets with opposite helicities and magnetic field 4.5 T will be used. To correct beam trajectory, additional dipole correctors are required.

43 PARTICLE ACCELERATORS↗

Nb$_{3}$Sn Accelerator Magnets. Designs, Technologies and Performance

The goal of this book is to summarize and review the vast experience with Nb 3 Sn accelerator dipole magnets accumulated in the United States, Europe, and Asia since the discovery and production of Nb 3 Sn composite conductors. Interest in Nb 3 Sn accelerator magnets is soaring, and their further development is rapidly gaining momentum worldwide, thanks to the growing maturity of this technology and its great potential for particle accelerators used in high-energy physics. This book is intended to contribute to the transfer of the accumulated experience with the design, technology, and performance of such magnets in view of the challenging requirements set by the needs for ever-higher collision energies in future colliders. Engineers and physicists working in the field of particle accelerators, as well as students studying courses in particle accelerator physics and technologies, may find it an indispensable source of information on Nb 3 Sn accelerator magnets. Readers with a general interest in the history of science and technology may also find useful information that was obtained over a long period of time, from the late 1960s to the present day.

43 PARTICLE ACCELERATORS↗

Time-reversal symmetry breaking in the Fe-chalcogenide superconductors

Significance In the Fe-chalcogenide superconductors, topology, superconductivity, and magnetism all come together to provide a platform for a range of exotic quantum phenomena. Topology and superconductivity can interact to give topological superconductivity capable of supporting Majorana fermions that could prove to be the basis of future qubit technology. The large spin–orbit interaction associated with the topological phenomena combined with magnetism can potentially result in the quantum anomalous Hall effect although the superconductivity will work against such. It is important that we understand the relevant roles of the different phenomena. Here we provide evidence of time-reversal symmetry breaking and associated mass acquisition in a topological surface state at the superconducting transition, an observation highly suggestive of the formation of surface ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equilibrium properties of superconducting niobium at high magnetic fields: A possible existence of a filamentary state in type-II superconductors [Possible existence of a filamentary state in type-II superconductors]

The standard interpretation of the phase diagram of type-II superconductors was developed in the 1960s and has since been considered a well-established part of classical superconductivity. However, upon closer examination a number of fundamental issues arises that leads one to question this standard picture. To address these issues we studied equilibrium properties of niobium samples near and above the upper critical field H c2 in parallel and perpendicular magnetic fields. The samples investigated were very high quality films and single-crystal disks with the Ginzburg-Landau parameters 0.8 and 1.3, respectively. A range of complementary measurements has been performed, which include dc magnetometry, electrical transport, muon spin rotation spectroscopy, and scanning Hall-probe microscopy. Contrary to the standard scenario, we observed that a superconducting phase is present in the sample bulk above H c2 and the field H c3 is the same in both parallel and perpendicular fields. Our findings suggest that above H c2 the superconducting phase forms filaments parallel to the field regardless of the field orientation. Near H c2 the filaments preserve the hexagonal structure of the preceding vortex lattice of the mixed state, and the filament density continuously falls to zero at H c3 . Finally, our paper has important implications for the correct interpretation of the properties of type-II superconductors and can be essential for practical applications of these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radial distribution of charged particles in a magnetic field

The radial spread of charged particles emitted from a point source in a magnetic field is a potential source of systematic error for any experiment where magnetic fields guide charged particles to detectors with finite size. Assuming uniform probability as a function of the phase along the particle’s helical trajectory, an analytic solution for the radial probability distribution function follows which applies to experiments in which particles are generated throughout a volume that spans a sufficient length along the axis of a homogeneous magnetic field. This approach leads to the same result as a different derivation given by Dubbers et al., Nucl. Instrum. Methods Phys. Res., Sect. A 763, 112–119 (2014). But the constant phase approximation does not strictly apply to finite source volumes or fixed positions, which lead to local maxima in the radial distribution of emitted particles at the plane of the detector. A simple method is given to calculate such distributions, then the effect is demonstrated with data from a {sup 207}Bi electron-conversion source in the superconducting solenoid magnet spectrometer of the Ultracold Neutron facility at the Los Alamos Neutron Science Center. Implications for neutron beta decay spectroscopy are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Irreversible magnetization switching at the onset of superconductivity in a superconductor ferromagnet hybrid

We demonstrate that the magnetic state of a superconducting spin valve, that is normally controlled with an external magnetic field, can also be manipulated by varying the temperature which increases the functionality and flexibility of such structures as switching elements. In this case, switching is driven by changes in the magnetostatic energy due to spontaneous Meissner screening currents forming in the superconductor below the critical temperature. Our scanning Hall probe measurements also reveal vortex-mediated pinning of the ferromagnetic domain structure due to the pinning of quantized stray fields in the adjacent superconductor. The ability to use temperature as well as magnetic field to control the local magnetisation structure raises the prospect of potential applications in magnetic memory devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

General Failure Modes and Effects Analysis for Accelerator and Detector Magnet Design at JLab

The aim of this article is to develop a risk management procedure, which could be applied to the magnet design process, for both superconducting and normal magnets at the Jefferson Laboratory (JLab). This procedure allowed us to identify the key risks at each of the critical phases of design and propose procedures, tests, and checks to mitigate each risk. In this article, we present a qualitative and quantitative risk management procedure commonly referred to a “failure modes and effects analysis.” As part of this procedure, we calculated a risk priority number (RPN) for each activity of the process, identified the most critical activities and proposed mitigation activities, which in turn resulted in a revised RPN. Additionally, another benefit of this procedure was the identification of appropriate “control and hold” points within the design process, which allowed one to review and approve a particular outcome before proceeding to the next sequential activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monte Carlo study of the pseudogap and superconductivity emerging from quantum magnetic fluctuations

Abstract The origin of the pseudogap behavior, found in many high- T c superconductors, remains one of the greatest puzzles in condensed matter physics. One possible mechanism is fermionic incoherence, which near a quantum critical point allows pair formation but suppresses superconductivity. Employing quantum Monte Carlo simulations of a model of itinerant fermions coupled to ferromagnetic spin fluctuations, represented by a quantum rotor, we report numerical evidence of pseudogap behavior, emerging from pairing fluctuations in a quantum-critical non-Fermi liquid. Specifically, we observe enhanced pairing fluctuations and a partial gap opening in the fermionic spectrum. However, the system remains non-superconducting until reaching a much lower temperature. In the pseudogap regime the system displays a “gap-filling" rather than “gap-closing" behavior, similar to the one observed in cuprate superconductors. Our results present direct evidence of the pseudogap state, driven by superconducting fluctuations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance of low-loss demountable joints between CORC ® cable-in-conduit-conductors at magnetic fields up to 8 T developed for fusion magnets

Abstract High-temperature superconductors (HTS) are promising candidates for use in the high-field magnets needed in particle accelerators and fusion reactors. HTS conductor on round core (CORC ® ) cables and wires wound from ReBa 2 Cu 3 O 7- x (REBCO) coated tapes are being developed for use in high-field magnet applications including fusion magnets operating at currents beyond 80 kA, requiring them to be bundled into cable-in-conduit conductor (CICC) configurations. The use of HTS cables enable demountable superconducting fusion magnets that would allow easier access to the fusion machine for maintenance and parts replacement. Such demountable magnets require practical, low-resistance joints, capable of injecting current uniformly into the many REBCO tapes that make up different cable designs. Optimization steps on CORC ® cables have resulted in high-current terminations and joints with a joint resistance measured between a pair of 30-tape CORC ® cables of 51 nΩ at 76 K and 1.9 nΩ at 4 K. Demountable joints between CICCs consisting of six CORC ® cables arranged in flat and round configurations were also tested and compared to joints between low-temperature superconducting (LTS) CICCs consisting of NbTi Rutherford cables. Samples were paired into two configurations (LTS-to-LTS and HTS-to-HTS) with a demountable joint between them that were each tested in series with currents up to 10 000 A in an applied background magnetic field of up to 8 T. The total loop resistance of the HTS-to-HTS sample, including their terminations and joint, was about 4 nΩ at 4 K in self-field with the resistance of the copper pressed joint being less than 1 nΩ. At 8 T, the total loop resistance increased to 6.9 nΩ with the pressed joint contributing 1.4 nΩ. These initial tests prove the feasibility of producing remountable (dry) joints with low resistance between superconducting magnet windings in future compact fusion machines.

Physics↗