Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Investigation of magnetic proximity effect in Ta/YIG bilayer Hall bar structure

In this work, the investigation of magnetic proximity effect was extended to Ta which has been reported to have a negative spin Hall angle. Magnetoresistance (MR) and Hall measurements for in-plane and out-of-plane applied magnetic field sweeps were carried out at room temperature. The size of the MR ratio observed (∼10{sup −5}) and its magnetization direction dependence are similar to that reported in Pt/yttrium iron garnet, both of which can be explained by the spin Hall magnetoresistance theory. Additionally, a flip of magnetoresistance polarity is observed at 4 K in the temperature dependent measurements, which can be explained by the magnetic proximity effect induced anisotropic magnetoresistance at low temperature. Our findings suggest that both magnetic proximity effect and spin Hall magnetoresistance have contribution to the recently observed unconventional magnetoresistance effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Restricted Geometry on the Structure and Phase Transitions in Potassium Nitrate Nanoparticles

The effect of restricted geometry and thermal prehistory of sample preparation on phase transitions in nanocomposites on base of porous glasses with average pore diameters 7 and 46 nm filled by potassium nitrate have been studied by X-rays and neutron diffraction. The nanoparticle sizes have been determined and phase diagrams (on cooling) for these nanoparticles have been described. It is shown that there is a critical nanoparticle size in the interval from 30 till 20 nm, at which in nanocomposite the ferroelectric phase is realized only regardless of preparation method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and magnetic properties and superconductivity in Ba(Fe 1-x TM x ) 2 As 2

We studied the effects on structural and magnetic phase transitions and the emergence of superconductivity in transition metal substituted BaFe 2 As 2 . We grew four series of Ba(Fe 1-x TM 2 ) 2 As 2 (TM=Ru, Mn, Co+Cr and Co+Mn) and characterized them by crystallographic, magnetic and transport measurements. We also subjected Ba(Fe 1-x Cr x ) 2 As 2 and Ba(Fe 1-x Co x ) 2 As 2 to heat treatment to explore what changes might be induced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the Effect of Temperature on the Structure of SARS-CoV-2 Spike Protein by Molecular Dynamics Simulations

Statistical and epidemiological data imply temperature sensitivity of the SARS-CoV2 coronavirus. However, the molecular level understanding of the virus structure at different temperature is still not clear. Spike protein is the outermost structural protein of the SARS-CoV-2 virus which interacts with the Angiotensin Converting Enzyme 2 (ACE2), a human receptor, and enters the respiratory system. In this study, we performed an all atom molecular dynamics simulation to study the effect of temperature on the structure of the Spike protein. After 200 ns of simulation at different temperatures, we came across some interesting phenomena exhibited by the protein. We found that the solvent exposed domain of Spike protein, namely S1, is more mobile than the transmembrane domain, S2. Structural studies implied the presence of several charged residues on the surface of N-terminal Domain of S1 which are optimally oriented at 10– 30°C. Bioinformatics analyses indicated that it is capable of binding to other human receptors and should not be disregarded. Additionally, we found that receptor binding motif (RBM), present on the receptor binding domain (RBD) of S1, begins to close around temperature of 40°C and attains a completely closed conformation at 50°C. We also found that the presence of glycan moieties did not influence the observed protein dynamics. Nevertheless, the closed conformation disables its ability to bind to ACE2, due to the burying of its receptor binding residues. Our results clearly show that there are active and inactive states of the protein at different temperatures. This would not only prove beneficial for understanding the fundamental nature of the virus, but would be also useful in the development of vaccines and therapeutics.

59 BASIC BIOLOGICAL SCIENCES↗

One-step Ar/O{sub 2} thermal plasma processing of Y{sub 2}O{sub 3}:Eu{sup 3+} red phosphors: Phase structure, photoluminescent properties, and the effects of Sc{sup 3+} codoping

(Y{sub 0.95}Eu{sub 0.05}){sub 2}O{sub 3} red phosphors are synthesized in one step via Ar/O{sub 2} thermal plasma oxidation of atomized alcohol solutions of the component nitrates. Phase structure analysis found the direct products to be mixtures of a cubic and monoclinic phases, and the powder collected from the wall part of the plasma reactor as well as the finer portion of the total powder have significantly higher monoclinic contents ({approx}55 and 71 wt%, respectively). An almost pure-cubic structured phosphor powder can be converted from the phase mixture by annealing at a minimum temperature of 900 Degree-Sign C for 12 h, but at the expenses of significant coarsening/sintering of the nano-sized particles. It was first shown that codoping with 20 at% of Sc{sup 3+} may effectively retard crystallization of the undesired monoclinic phase and thus yield phosphor powders of high specific surface area ({approx}21.7 m{sup 2}/g) and significantly improved 611-nm red emission. Formation mechanism of the monoclinic phase and the effects of Sc{sup 3+} codoping on phase structure and luminescence properties were discussed. - Graphical abstract: Y{sub 2}O{sub 3}:Eu phosphors are synthesized in one-step via thermal plasma processing. The direct products are monoclinic and cubic phase mixtures, and Sc{sup 3+} codoping effectively suppresses crystallization of the undesired monoclinic phase to yield phosphor powders of high specific surface area and significantly improved photoluminescence. Highlights: Black-Right-Pointing-Pointer Thermal plasma processing yields Y{sub 2}O{sub 3}:Eu phosphors in one-step. Black-Right-Pointing-Pointer The direct products are monoclinic and cubic phase mixtures. Black-Right-Pointing-Pointer Sc{sup 3+} codoping effectively suppresses monoclinic crystallization. Black-Right-Pointing-Pointer Better luminescence is achieved via Sc{sup 3+} codoping.

36 MATERIALS SCIENCE↗

Defect formation during chlorine-based dry etching and their effects on the electronic and structural properties of InP/InAsP quantum wells

The general objective is the investigation of the defects formed by dry etching tools such as those involved in the fabrication of photonic devices with III–V semiconductors. Emphasis is put on plasma exposures with chlorine-based chemistries. In addition to identifying these defects and describing their effects on the electro-optic and structural properties, the long-term target would be to predict the impact on the parameters of importance for photonic devices, and possibly include these predictions in their design. The work is first centered on explaining the experimental methodology. This methodology starts with the design and growth of a quantum well structure on indium phosphide, including ternary indium arsenide/phosphide quantum wells with graded arsenic/phosphor composition. These samples have then been characterized by luminescence methods (photo- and cathodoluminescence), high-resolution transmission electron microscopy, and secondary ion mass spectrometry. As one of the parameters of importance in this study, the authors have also included the doping level. The samples have been exposed to the etching plasmas for “short” durations that do not remove completely the quantum wells, but change their optical signature. No masking layer with lithographic features was involved as this work is purely oriented to study the interaction between the plasma and the samples. A significant difference in the luminescence spectra of the as-grown undoped and doped samples is observed. A mechanism describing the effect of the built-in electric field appearing as a consequence of the doping profile is proposed. This mechanism involves quantum confined Stark effect and electric-field induced carrier escape from the quantum wells. In the following part, the effects of exposure to various chlorine-based plasmas were explored. Differences are again observed between the undoped and doped samples, especially for chemistries containing silicon tetrachloride. Secondary ion mass spectrometry indicates penetration of chlorine in the structures. Transmission electron microscopy is used to characterize the quantum well structure before and after plasma bombardment. By examining carefully the luminescence spectral properties, the authors could demonstrate the influence of the etching plasmas on the built-in electric field (in the case of doped samples), and relate it to some ionic species penetrating the structures. Etching plasmas involving both chlorine and nitrogen have also been studied. The etching rate for these chemistries is much slower than for some of the silicon tetrachloride based chemistries. Their effects on the samples are also very different, showing much reduced effect on the built-in electric field (for the doped samples), but significant blue-shifts of the luminescence peaks that the authors attributed to the penetration of nitrogen in the structures. Nitrogen, in interstitial locations, induces mechanical compressive stress that accounts for the blue-shifts. Finally, from the comparison between secondary ion mass spectrometry and luminescence spectra, the authors suggest some elements for a general mechanism involved in the etching by chloride-chemistries, in which a competition takes place between the species at the surface, active for the etching mechanism, and the species that penetrate the structure, lost for the etching process, but relevant in terms of impact on the electro-optic and structural features of the exposed materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the Effect of Confinement on the Structure and Properties of Small-Molecular Organic Semiconductors

Many typical organic optoelectronic devices, such as light-emitting diodes, field-effect transistors, and photovoltaic cells, use an ultrathin active layer where the organic semiconductor is confined within nanoscale dimensions. However, the question of how this spatial constraint impacts the active material is rarely addressed, although it may have a drastic influence on the phase behavior and microstructure of the active layer and hence the final performance. Here, the small-molecule semiconductor p-DTS(FBTTh 2 ) 2 is used as a model system to illustrate how sensitive this class of material can be to spatial confinement on device-relevant length scales. It is also shown that this effect can be exploited; it is demonstrated, for instance, that spatial confinement is an efficient tool to direct the crystal orientation and overall texture of p-DTS(FBTTh 2 ) 2 structures in a controlled manner, allowing for the manipulation of properties including photoluminescence and charge transport characteristics. This insight should be widely applicable as the temperature/confinement phase diagrams established via differential scanning calorimetry and grazing-incidence X-ray diffraction are used to identify specific processing routes that can be directly extrapolated to other functional organic materials, such as polymeric semiconductors, ferroelectrics or high-refractive-index polymers, to induce desired crystal textures or specific (potentially new) polymorphs.

14 SOLAR ENERGY↗

Effect of Fe doping on structural and impedance properties of PZTFN ceramics

An attempts have been made to synthesis the ceramics Pb{sub 1-3x/2} Fe{sub x}(Zr{sub 0.52}Ti{sub 0.48}){sub 1-5y/4} NbyO{sub 3} abbreviated as (PFZTN) for x = 1-6 mol% and y = 5.5 mol% by a semi-wet route. In the present paper, we have investigated the effect of Fe doping on structural and electrical properties of the PFZTN ceramics. X-ray diffraction (XRD) patterns reveal that PFZTN ceramics are single phase in nature. However, for x = 0.05 and 0.06, a secondary phase appears as discernible from the XRD profiles. Rietveld analysis of the powder diffraction data shows the presence of coexistence of tetragonal (P4mm space group) and rhombohedral phases (R3c space group) occurs near the morphotropic phase boundary (MPB) at x ≥ = 0.05. The log-log plots show that the conductivity increases with increase of temperature. The ac conductivity becomes sensitive at high frequency region and shifted towards higher frequency side with increasing temperature. It is observed that the activation energy (Ea) decreases with increasing frequency. This complex perovskite structure can be used as a multilayer ceramic capacitors and electromechanical transducers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental Plan for EDF Energy Creep Rabbit Graphite Irradiations- Rev. 2 (replaces Rev. 0 ORNL/TM/2013/49)

The experimental results obtained here will assist in the development and validation of future models of irradiation induced creep of graphite by providing the following data: Inert creep stain data from low to lifetime AGR fluence Inert creep-property data (especially CTE) from low to lifetime AGR fluence Effect of oxidation on creep modulus (by indirect comparison with experiment 1 and direct comparison with experiment 3 NB. Experiment 1 and 3 are not covered here) Data to develop a mechanistic understanding, including: appropriate creep modulus (including pinning and high dose effects on structure), investigation of CTE-creep strain behavior under inert conditions oInformation on the effect of applied stress/creep strain on crystallite orientation (requires XRD), effect of creep strain on micro-porosity (requires tomography & microscopy) This document describes the experimental work planned to meet the requirements of project technical specification and EDF Energy requests for additional Pre-IE work. The PIE work is described in detail in this revision (Section 8 and 9).

Burchell, Timothy D.↗

A room temperature exchange bias effect caused by the coexisting martensitic phase structures in Ni50Mn38Sb12−xGax polycrystalline Heusler alloys

The exchange bias effect is the physical cornerstone of applications, such as spin valves, ultra-high-density data storage, and magnetic tunnel junctions. This work studied the room temperature exchange bias effect by constructing a Ni50Mn38Sb12−xGax alloy system with coexisting martensitic phase structures. The study found that the exchange bias effect shows a non-monotonic change with the variation of Ga composition at 300 K, and an obvious room temperature exchange bias effect appears in the alloys with coexisting phase structures of 4O and L10, which is due to the strong exchange coupling between ferromagnetic and antiferromagnetic. Further research on the exchange bias effect and temperature shows that the blocking temperature is 420 K, and the exchange bias can stably exist in a temperature range of ∼200 K around room temperature. This work provides a method to engineer exchange bias effects at room temperature.

Physics↗

Radiation effects on stress evolution and dimensional stability of large fusion energy structures

Here we assess the effects of neutron irradiation on the deformation and stress evolution of large-scale fusion energy structures. This is accomplished through non-linear finite element structural analysis of the coupled thermal and mechanical fields at the Beginning-Of-Life (BOL), at 45 dpa, and at 90 dpa. Radiation effects include volumetric swelling and the influence of radiation on the mechanical properties. The system studied here is a large section of a full inboard module of an integrated structure comprising the First Wall and Blanket (FW/B) of a Dual Cooled Lithium-Lead (DCLL) energy conversion unit in the Fusion Nuclear Science Facility (FNSF). The structural material is the ferritic/martensitic steel F82H. We analyze several radiation effects phenomena that can lead to significant impact on the mechanical design and lifetime of the structure. These include volumetric swelling effects on the assembly and disassembly of modules and the impact of spatial gradients in neutron damage and helium generation on deformation, stress evolution, and plastic strain accumulation. We show that the stress state is strongly influenced by the accumulation of swelling strains, radiation hardening and softening, and by spatial gradients in displacement damage and helium gas generation. Several key regions in the FW/B structure are identified where severe plastic strains accumulate and may be potential sites for failure, especially during cyclic reactor operations. We finally show that minimum gaps between Inboard (IB) blanket sectors must be present during assembly so as to avoid excessive stress and strain in FW/B modules critical regions and raising chances of failure. A range of structural displacements are shown, from as low as 4 mm at BOL for free side walls to as high as 46 mm at 90 dpa for fully constrained side walls.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of sintering treatment on structural and magnetic properties of Ni{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} ferrites

Two sets of Ni{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} ferrites were synthesized using sol-gel method. Both the samples were heat treated at different temperatures. The effect of sintering treatment analyzed on structural and magnetic properties. X-ray diffraction (XRD) and scanning electron microscope (SEM) were used for structural analysis. Alternating gradient magnetometer (AGM) is used for magnetic measurements. In structural analysis, grains size is calculated using Debye - Scherrer’s formula and Williamson-Hall (W-H) plot. From both the techniques, grain size is found nearly same and increased in size with increase sintering temperature. Increased particle size is confirmed from SEM micrographs. Strain value is calculated from intercept of W-H plot. In both the samples, compressive strain in nature is found. Magnetic properties were also varying under different heat treatment. The change in magnetic properties with change in structural change at different sintering treatment is discussed in this report.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A structural explanation for the low effectiveness of the seasonal influenza H3N2 vaccine

The effectiveness of the annual influenza vaccine has declined in recent years, especially for the H3N2 component, and is a concern for global public health. A major cause for this lack in effectiveness has been attributed to the egg-based vaccine production process. Substitutions on the hemagglutinin glycoprotein (HA) often arise during virus passaging that change its antigenicity and hence vaccine effectiveness. Here, we characterize the effect of a prevalent substitution, L194P, in egg-passaged H3N2 viruses. X-ray structural analysis reveals that this substitution surprisingly increases the mobility of the 190-helix and neighboring regions in antigenic site B, which forms one side of the receptor binding site (RBS) and is immunodominant in recent human H3N2 viruses. Importantly, the L194P substitution decreases binding and neutralization by an RBS-targeted broadly neutralizing antibody by three orders of magnitude and significantly changes the HA antigenicity as measured by binding of human serum antibodies. The receptor binding mode and specificity are also altered to adapt to avian receptors during egg passaging. Overall, these findings help explain the low effectiveness of the seasonal vaccine against H3N2 viruses, and suggest that alternative approaches should be accelerated for producing influenza vaccines as well as isolating clinical isolates.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of Functional and Electron Correlation on the Structure and Spectroscopy of the Al 2 O 3 (001)–H 2 O Interface

Oxide–water interfaces are ubiquitous, with many applications in industry and the environment, yet there is a great deal of controversy over their properties and microscopic structure. This controversy stems, in part, from the unique H-bond networks formed at different surface terminations and mineral compositions. Density functional theory simulations of these interfaces require an accurate description of both the oxide mineral and water in diverse H-bond environments. Thus, herein we simulate the Al 2 O 3 (001)–H 2 O interface using the PBE, PBE-TS, RPBE, SCAN, and HSE06-TS functionals to determine how calculated interfacial properties depend on the choice of functional. We find that the structure of the first few layers of water at the surface is determined by electron correlation in a way that cannot be approximated using semiemipirical van der Waals corrections. Of the functionals investigated, we find that SCAN yields the most accurate interfacial structure, dynamics, and sum frequency generation spectrum. Furthermore, SCAN leads to a reduction in the order of the 2D H-bond network of water at the alumina surface predicted by GGA functionals, leading to a significant decrease in the anisotropy of the diffusion coefficient at the surface. We emphasize the importance of using a functional which accurately describes electron correlation for more complex oxides, such as transition-metal oxides, where electron correlation may play an even greater role in determining the structure and dynamics of the oxide–water interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Cr substitution on structural and magnetic properties in La{sub 0.7}Pr{sub 0.3}Fe{sub 11.4}Si{sub 1.6} compound

In an effort to explore the effect of substitution Fe by Cr in NaZn{sub 13}-type La{sub 0.7}Pr{sub 0.3}Fe{sub 11.4−x}Cr{sub x}Si{sub 1.6} (x = 0, 0.06, 0.12, 0.26, and 0.34) compounds, the structure and magnetic properties have been investigated by high intensity of x-ray and neutron diffraction, scanning electron microscopy, specific heat, and magnetization measurement. It has been found that a substitution of Cr for Fe in this compounds leads to decrease in the lattice parameter a at room temperature but variation on Curie temperature (T{sub C}). While the first order nature of magnetic phase transition around T{sub C} does not change with increasing Cr content up to x = 0.34. High intensity x-ray and neutron diffraction study at variable temperatures for highest Cr concentration x = 0.34 confirmed the presence of strong magneto-volume effect around T{sub C} and indicated the direct evident of coexistence across magnetic transition as characteristic of first order nature. The values of −ΔS{sub M} around T{sub C} decrease from 17 J kg{sup −1} K{sup −1} for x = 0 to 12 J kg{sup −1} K{sup −1} for x = 0.06 and then increases with further increasing Cr content up to 17.5 J kg{sup −1} K{sup −1} for x = 0.34 under a change of 0–5 T magnetic field. Similar behavior on relative cooling power which is decrease from 390 J kg{sup −1} for x = 0 to 365 J kg{sup −1} for x = 0.06 at the beginning and then increases up to 400 J kg{sup −1} for x = 0.34. From the point of this view with the highest Cr concentration (x = 0.34) exhibits favourable material candidate for magnetic refrigerator application therefore should inspire further study concerning on higher Cr concentration in this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

University of Missouri Research Reactor (MURR) LEU Fuel Fluid-Structure Interaction Analysis

The University of Missouri Research Reactor (MURR ® ) is one of five U.S. high performance research reactors (USHPRR), plus one critical facility, that are actively collaborating with the National Nuclear Security Administration (NNSA) Material Management and Minimization (M 3 ) Reactor Conversion Program to convert from highly enriched uranium (HEU, ≥ 20 wt.% U-235) to low-enriched uranium (LEU, < 20 wt.% U-235) fuel. A new type of LEU fuel with very high density, based on an alloy of uranium and 10 weight percent molybdenum (U-10Mo), is expected to allow the conversion to LEU of USHPRR that have been found unable to be converted with previously qualified uranium silicide-aluminum (U 3 Si 2 -Al) dispersion fuel. MURR has been working with the USHPRR Reactor Conversion (RC) Pillar at Argonne National Laboratory to perform fuel element design and fuel cycle performance analyses, steady-state thermal hydraulics safety analyses, and accident safety analyses in preparation for the conversion of MURR and to support a preliminary Safety Analysis Report (SAR) for conversion to LEU fuel. In this work, Fluid-structure interaction (FSI) analysis at the fuel element level, as compared to the fuel plate level of the previous work. is performed which models all components of the MURR LEU fuel element, including fuel plates and the supporting structures e.g., side plates, end fittings, and combs. Therefore, the effect of supporting structures on the coolant flow distribution, the fuel plate deflection, and the resulting coolant channel gap reduction can be evaluated. In addition to the nominal element geometry and flow rate, the tolerances in the geometry dimensions of coolant channel and plate thickness, the effect of a comb on plate deflection, and the uncertainty of the flow rate per element are considered in this work. The effect of comb on plate displacement is quantified through two bounding cases: the case assuming a perfect bond between the comb and plates and the case neglecting the comb effect. Note that in this analysis, the FSI has been decoupled from the other structural effects caused by irradiation (e.g., swelling and irradiation creep). Assessment of combined effects is planned for a later stage of this project.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of annealing temperature on structure and electrical properties of topological insulator Bi{sub 2}Te{sub 3}

Bi{sub 2}Te{sub 3} samples were prepared by precipitation method. The samples were annealed in evacuated quartz tubes and were treated at different temperature for different duration of time. Effects of annealing temperature and time on the structure of Bi{sub 2}Te{sub 3} were studied in detail. The Bi{sub 2}Te{sub 3} samples annealed at temperature 300°C and 450°C for 48Hrs, 72Hrs and 96Hrs were selected for the present study. The structure of Bi{sub 2}Te{sub 3} and related phases were investigated by the X-ray powder diffraction technique. Morphology and chemical compositions of the samples were investigated by scanning electron microscope and energy dispersive X-ray spectroscopy respectively. All the samples were indexed in rhombohedral crystal structure, with a space group R-3m. The structure consists of repeated quintuple layers of atoms, Te2-Bi-Te1-Bi-Te2 stacking along the z-axis of the unit cell. Electrical properties of the sample annealed at 300°C for 96Hrs was evaluated by measurements of the electrical resistivity and magnetoresistance. The magnetoresistance data at low temperature (1.5 to 50 K) were analyzed to investigate weak antilocalization (WAL) effect. MR data followed the Hikami–Larkin–Nagaoka (HLN) equation with a fit parameter α close to −1 as expected for topological surface states at 1.5 K, but for other temperatures the small oscillations were observed which may be due to the phenomena like Shubnikov-de Hass effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of thermal annealing on structural and optical properties of In{sub 2}S{sub 3} thin films

There is a highly need of an alternate of toxic materials CdS for solar cell applications and indium sulfide is found the most suitable candidate to replace CdS due to its non-toxic and environmental friendly nature. In this paper, the effect of thermal annealing on the structural and optical properties of indium sulfide (In{sub 2}S{sub 3}) thin films is undertaken. The indium sulfide thin films of 121 nm were deposited on glass substrates employing thermal evaporation method. The films were subjected to the X-ray diffractometer and UV-Vis spectrophotometer respectively for structural and optical analysis. The XRD pattern show that the as-deposited thin film was amorphous in nature and crystallinity is found to be varied with annealing temperature. The optical analysis reveals that the optical band gap is varied with annealing. The optical parameters like absorption coefficient, extinction coefficient and refractive index were calculated. The results are in good agreement with available literature.

36 MATERIALS SCIENCE↗