Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Lightweight, fire-retardant, crashworthy aircraft seat cushioning

A two page discussion of non-aerospace seating applications and the design of NASA's safety seat cushioning (SSC) is presented. The SSC was designed for both safety and comfort in order to replace polyurethane cushioning which is flammable and produces lethal fumes upon combustion. The SSC is composed of advanced fabric reinforced composites and is lightweight, fire-retardent, and crashworthy. The seat design consists of central elliptical tubular spring supports made of fire-resistant and fatigue-durable composites surrounded by a fire-blocking sheath. The cushioning is made crashworthy by incorporating energy-absorbing, viscoelastic layers between the nested, elliptical-hoop springs. The design is intended to provide comfortable seating that meets aircraft-loading requirements without using the conventional polyurethane materials. The designs of an aircraft seat and structural components of the SSC are also presented.

Haslim, Leonard A.↗

Effect of flange bolt preload on Space Shuttle main engine high pressure oxidizer turbopump housing analysis

Cracks at the seal fillet flange and the strut pilot groove of primary turbine drain passage of the space shuttle main engine (SSME) high pressure oxidizer turbopump (HPOTP) were observed and reported. Stress information for critical structural components in the SSME under actual conditions is necessary for design and life prediction analysis. However, little information is available about the stress distribution at this location under various combinations of loadings and environments. Thus, a stress analysis was conducted to determine an influence of the various operation and installation loads on the stresses of the HPOTP main mounting flange. To do this, a 3-D finite element model of the HPOTP housing was generated. A fairly comfortable margin of stresses at the flange fillet with respect to the yield stress of Inconel 718 is shown. However, it was revealed that the bending stress arising from the housing flange bolt preloads could significantly affect the stress distribution at the strut pilot groove of primary turbine drain passage in the HPOTP housing. Consequently, the information obtained from the present 3-D analysis results should be useful in guiding the development of the SSME HPOTP.

Min, J. B.↗

Meteoroid/space debris impacts on MSFC LDEF experiments

A number of unusual effects are presented that were observed on the TCSE test samples, front cover, and structural components. These include induced UV fluorescence in some materials, the migration and degradation of KRS-5 materials, atomic oxygen (AO), and contaminant texturing and discoloration, and meteoroid and debris impacts. These effects and their causes are discussed.

Zwiener, James M.↗

Unusual materials effects observed on the thermal control surfaces experiment (S0069)

A number of unusual effects were observed on the Thermal Control Surface Experiment (TCSE) test samples, front cover, and structural components. These include induced UV fluorescence, the migration and degradation of KRS-5 materials, atomic oxygen effects, contamination, texturing, discoloration, and meteoroid/debris impact. LDEF (Long Duration Exposure Facility) mission induced fluorescence was observed on several TCSE samples. Similar fluorescence was observed on LDEF leading edge materials from Experiment A0114.

Zwiener, James M.↗

First biological and dosimetric results of the free flyer biostack experiment AO015 on LDEF

The main objectives of the Biostack Experiment are to study the effectiveness of the structured components of the cosmic radiation to bacterial spores, plant seeds, and animal cysts for a long duration spaceflight and to get dosimetric data such as particle fluences and spectra and total doses for the Long Duration Exposure Facility orbit. The configuration of the experiment packages allows the localization of the trajectory of the particles in each biological layer and to correlate the potential biological impairment or injury with the physical characteristics of the responsible particle. Although the Biostack Experiment was designed for a long duration flight of only nine months, most of the biological systems show a high hatching or germination rate. Some of the first observations are an increase of the mutation rate of embryonic lethals in the second generation of Arabidopsis seeds, somatic mutations, and a reduction of growth rates of corn plants and a reduction of life span of Artemia salina shrimps. The different passive detector systems are also in a good shape and give access to a proper dosimetric analysis. The results are summarized, and some aspects of future analysis are shown.

Reitz, G.↗

Braze alloy process and strength characterization studies for 18 nickel grade 200 maraging steel with application to wind tunnel models

A comprehensive study of braze alloy selection process and strength characterization with application to wind tunnel models is presented. The applications for this study include the installation of stainless steel pressure tubing in model airfoil sections make of 18 Ni 200 grade maraging steel and the joining of wing structural components by brazing. Acceptable braze alloys for these applications are identified along with process, thermal braze cycle data, and thermal management procedures. Shear specimens are used to evaluate comparative shear strength properties for the various alloys at both room and cryogenic (-300 F) temperatures and include the effects of electroless nickel plating. Nickel plating was found to significantly enhance both the wetability and strength properties for the various braze alloys studied. The data are provided for use in selecting braze alloys for use with 18 Ni grade 200 steel in the design of wind tunnel models to be tested in an ambient or cryogenic environment.

Bradshaw, James F.↗

Probabilistic lifetime strength of aerospace materials via computational simulation

The results of a second year effort of a research program are presented. The research included development of methodology that provides probabilistic lifetime strength of aerospace materials via computational simulation. A probabilistic phenomenological constitutive relationship, in the form of a randomized multifactor interaction equation, is postulated for strength degradation of structural components of aerospace propulsion systems subjected to a number of effects of primitive variables. These primitive variables often originate in the environment and may include stress from loading, temperature, chemical, or radiation attack. This multifactor interaction constitutive equation is included in the computer program, PROMISS. Also included in the research is the development of methodology to calibrate the constitutive equation using actual experimental materials data together with the multiple linear regression of that data.

Boyce, Lola↗

Computational simulation of high temperature metal matrix composite behavior

Computational procedures are described to simulate the thermal and mechanical behavior of high temperature metal matrix composite (HT MMC) in the following four broad areas: (1) behavior of HT MMC from micromechanics to laminate; (2) HT MMC structural response for simple and complex structural components; (3) HT MMC microfracture; and (4) tailoring of HT MMC behavior for optimum specific performance. Representative results from each area are presented to illustrate the effectiveness of the computational simulation procedures. Relevant reports are referenced for extended discussion regarding the specific area.

Murthy, Pappu L. N.↗

Structural monitoring of filamentary composites using embedded fiber optics

The feasibility of monitoring overall integrity of structural components made of filamentary composites, by embedding optical fibers between lamina of a composite beam, is investigated using a beam constructed of Kevlar/epoxy cloth with embedded optical fibers aligned with the longitudinal axis of the beam. Phase changes were monitored in three different optical fibers as the composite beam was subjected to pure bending, and the strain response of the fibers was compared to the strain gage readings taken at the surface, showing a strong correlation between the phase change and the applied deformation.

Cashon, John L.↗

The interstellar D1 line at high resolution

Observations at a resolving power or a velocity resolution are reported of the interstellar D(sub 1) line of Na I in the spectra of Gamma Cas, Delta Ori, Epsilon Ori, Pi Sco, Delta Cyg, and Alpha Cyg. An echelle grating was used in a double-pass configuration with a CCD detector in the coude spectrograph of the 2.7 m reflector at McDonald Observatory. At least 42 kinematically distinct clouds are detected along the light paths to the five more distant stars, in addition to a single cloud seen toward Delta Cyg. The absorption lines arising in 13 of the clouds are sufficiently narrow and unblended to reveal clearly resolved hyperfine structure components split by 1.05 km/s. An additional 13 clouds apparently show comparably narrow, but more strongly blended, lines. For each individual cloud, upper limits T(sub max) and (v sub t) (sub max) on the temperature and the turbulent velocity, respectively, are derived by fitting the observing lines with theoretical absorption profiles.

Hobbs, L. M.↗

Quantification of uncertainties in coupled material degradation processes - High temperature, fatigue and creep

This paper describes the development of methodology that provides for quantification of uncertainties in lifetime strength of aerospace materials subjected to a number of diverse effects. A probabilistic material degradation model, in the form of a randomized multifactor interaction equation, has been postulated for lifetime strength degradation of structural components of aerospace propulsion systems. The model includes effects that typically reduce lifetime strength and may include temperature, mechanical fatigue, creep and others. The paper also includes the analysis of experimental data from the open literature for Inconel 718. These data are used to provide an initial check for model validity, as well as for calibration of the model's empirical material constants. The model validity check and calibration is carried out for three effects, namely, high temperature, mechanical fatigue and creep.

Boyce, L.↗

Crashworthy design of helicopter composite airframe structures

The crashworthy behavior of composite materials and generic structural elements is investigated. Cruciform structural elements are crushed in order to determine their energy absorption capability to rotorcraft crash-type loads, and quasi-static compression tests are conducted on a series of aluminum and composite cruciform elements. These elements are representative of keel beam and bulkhead intersections in the subfloor of rotorcraft. Various designs of 'trigger mechanisms' reducing initial peak failure loads and initiating stable crushing failure modes are considered. It is shown that a carbon-fiber-composite/aramid-fiber-composite hybrid element with a columnlike midsection behaves more like a well-designed tubular composite element. Specimens which fail primarily in bending are typical of structural components used in the upper and lower portions of rotorcraft airframes.

Boitnott, Richard L.↗

Materials and light thermal structures research for advanced space exploration

The Light Thermal Structures Center at the University of Virginia sponsors educational and research programs focused on the development of reliable, lightweight structures to function in hostile thermal environments. Technology advances in materials and design methodology for light thermal structures will contribute to improved space vehicle design concepts with attendant weight savings. This paper highlights current research activities in three areas relevant to space exploration: low density, high temperature aluminum alloys, composite materials, and structures with thermal gradients. Advances in the development of new aluminum-lithium alloys and mechanically alloyed aluminum alloys are described. Material properties and design features of advanced composites are highlighted. Research studies in thermal structures with temperature gradients include inelastic panel buckling and thermally induced unstable oscillations. Current and future research is focused on the integration of new materials with applications to structural components with thermal gradients.

Thornton, Earl A.↗

Application of finite-element-based solution technologies for viscoplastic structural analyses

Finite-element solution technology developed for use in conjunction with advanced viscoplastic models is described. The development of such solution technology is necessary for performing stress/life analyses of engineering structural problems where the complex geometries and loadings make the conventional analytical solutions difficult. The versatility of the solution technology is demonstrated by applying it to viscoplastic models possessing different mathematical structures and encompassing isotropic and anisotropic materials. The computational results qualitatively replicate deformation behavior observed in experiments on prototypical structural components.

Arya, Vinod K.↗

Composite-Blade Structural Analyzer

COBSTRAN (COmposite Blade STRuctural ANalyzer) computer program is preprocessor and postprocessor facilitating design and analysis of composite turbofan and turboprop blades, and of composite wind-turbine blades. Combines theories of mechanics of composites and of laminates with data base of fiber and matrix properties. Designed to carry out linear analyses required for efficient mathematical modeling and analysis of bladelike structural components made of multilayered angle-plied fiber composites. Components made from isotropic or anisotropic homogeneous materials also modeled. Written in FORTRAN 77.

Aiello, R. A.↗

Characteristics Of Superplastically Formed Ti-6242 Sheet

Near-alpha titanium alloy candidate for high-temperature structural airframe applications. Research characterizes selected mechanical properties of Ti-6242 sheets in superplastic forming (SPF) condition, both with and without heat treatment, and compares results with those obtained on as-received material. Information derived from research proves useful to aerospace community for designing and manufacturing Ti-6242 structures and structural components.

Royster, Dick M.↗

Computational simulation of coupled material degradation processes for probabilistic lifetime strength of aerospace materials

The research included ongoing development of methodology that provides probabilistic lifetime strength of aerospace materials via computational simulation. A probabilistic material strength degradation model, in the form of a randomized multifactor interaction equation, is postulated for strength degradation of structural components of aerospace propulsion systems subjected to a number of effects or primative variables. These primative variable may include high temperature, fatigue or creep. In most cases, strength is reduced as a result of the action of a variable. This multifactor interaction strength degradation equation has been randomized and is included in the computer program, PROMISS. Also included in the research is the development of methodology to calibrate the above described constitutive equation using actual experimental materials data together with linear regression of that data, thereby predicting values for the empirical material constraints for each effect or primative variable. This regression methodology is included in the computer program, PROMISC. Actual experimental materials data were obtained from the open literature for materials typically of interest to those studying aerospace propulsion system components. Material data for Inconel 718 was analyzed using the developed methodology.

Boyce, Lola↗

Embryogenesis and organogenesis of Carausius morosus under space flight conditions (7-IML-1)

The experiment is part of a radiobiological space research program to obtain experimental data on the biological effectiveness of the structured component of cosmic radiation during spaceflight. In this proposed experiment, Carausius morosus embryos of different ages will develop under spaceflight conditions. The experiment is designed to determine the influence of galactic heavy ions of very high energy deposition in microgravity on developmental processes of different radiation sensitivity and regenerative capacity. Layers of Carausius morosus eggs are sandwiched between different track detectors (cellulose nitrate, CR39). This method allows the localization of the trajectory of each heavy ion in the biological layer and the identification of the site of the penetration inside the egg.

Buecker, D. H.↗