Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

How novel is protactinium: Insights into the structure and properties of (PaO) 2 (SO 4 ) 3 (H 2 O) 2

Because of the scarcity of protactinium and the challenges associated with its separation and crystallization, even in sulfuric acid media where protactinium is relatively stable, there has been an incomplete understanding of the structural features of protactinium complexes. The characterization of protactinium sulfate complexes has been limited to those in solution, which have left key details unaddressed since the 1960s. This report describes a synthetic strategy to crystallize a protactinium complex using boric acid and sulfuric acid. Herein, the authors detail the results of hydrothermal synthesis and the single-crystal analysis of a novel protactinium sulfate complex, (PaO) 2 (SO 4 ) 3 (H 2 O) 2 . This work has elucidated structural features, providing groundwork for accurate computational analysis and clarifying previously unknown details on the coordination, denticity, and binding properties of protactinium sulfate complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Dynamics Simulation of the Structure and Properties of CaO-SiO{sub 2}-CaF{sub 2} Slag Systems

As a fundamental slag system in metallurgical processes, the CaO-SiO{sub 2}-CaF{sub 2} system, its properties, and related microstructures are of critical importance. The effect of the binary basicity and addition of CaF{sub 2} on the structure and viscosity of CaO-SiO{sub 2}-CaF{sub 2} slag were investigated using molecular dynamics simulations and Fourier transform infrared spectrometry. The average bond lengths of Si-O, Ca-O, and O-O were 1.61, 2.31, and 2.61 Å, respectively, and the coordinate number of Si remained constant. O-Si-O maintained an angle of 109.2, which was considered to be unaffected by the basicity changes. With increasing basicity, the network connectivity degrees Q{sup 3} and Q{sup 4} decreased, and the microstructure of the melt was significantly simpler. The effect of CaF{sub 2} on the depolymerization of the network structure was not obvious, and CaF{sub 2} acted mainly as a diluent. The calculations showed that the viscosity decreased upon setting up a ratio of nonbridging oxygen over tetrahedrally coordinated atoms (NBO/T). A good linear relationship was confirmed between the viscosity of the molten slag and the NBO/T.

36 MATERIALS SCIENCE↗

Synthesis, Crystal Structure, Electrochemical Properties, and Biological Activity of 2-((1H-Benzimidazol-2-yl)methylamino)acetic Acid

A water soluble compound, (2-((1H-benzimidazol-2-yl)methylamino)acetic acid, BIGH, has been synthesized and structurally characterized by elemental analysis, IR and UV spectroscopies, {sup 1}H-NMR, thermogravimetric and differential thermal analyses, and single crystal and powder X-ray diffraction. BIGH can act as a flexible planar ligand with three potential coordination sites. It crystallizes in a monoclinic system with the sp. gr. P2{sub 1}/c with the unit cell parameters, a = 9.3764(7) Å, b = 11.5031(8) Å, c = 10.0543(6) Å, and Z = 4. The crystal structure was stabilized through inter-molecular hydrogen bonds. The anti-microbial activity of the compound has been studied against Escherichia coli, Bacillus subtilis, Pseudomonas aeruginosa, and Staphylococcus aureus, which showed a good activity against Bacillus subtilis. Cyclic voltammogram of the compound shows that it is a redox-active molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gallium Pnictides of the Alkaline Earth Metals, Synthesized by Means of the Flux Method: Crystal Structures and Properties of CaGa[subscript 2]Pn[subscript 2], SrGa[subscript 2]As[subscript 2], Ba[subscript 2]Ga[subscript 5]As[subscript 5], and Ba[subscript 4]Ga[subscript 5]Pn[subscript 8] (Pn = P or As)

The focus of this paper is on the structural characterization of the new Zintl phases CaGa{sub 2}P{sub 2}, CaGa{sub 2}As{sub 2}, SrGa{sub 2}As{sub 2}, and Ba{sub 2}Ga{sub 5}As{sub 5}, and the solid solution (Ba{sub 0.85(1)}Sr{sub 0.15}){sub 2}Ga{sub 5}As{sub 5}, all of which were synthesized from molten metal fluxes.CaGa{sub 2}P{sub 2}, CaGa{sub 2}As{sub 2}, and SrGa{sub 2}As{sub 2} have layered structures with polyanionic layers made of ethane-like Ga{sub 2}P6 and Ga{sub 2}As6 motifs fused through common edges; the polyanionic substructure in Ba{sub 2}Ga{sub 5}As{sub 5} consists of condensed Ga{sub 2}As6 units and GaAs{sub 4} tetrahedra. Ba{sub 4}Ga{sub 5}P{sub 8} and Ba{sub 4}Ga{sub 5}As{sub 8}, another pair of new compounds with channel-like 3D structures, were also synthesized from metal fluxes, and their structures were established from single-crystal X-ray and synchrotron powder diffraction. They are based on GaP{sub 4} and GaAs{sub 4} tetrahedra, with parts of their structures being heavily disordered. The electronic structures computed with the linear muffin-tin orbital (LMTO) method are discussed as well, alongside the thermopower and the electrical conductivity, measured on single crystals of Ba{sub 2}Ga{sub 5}As{sub 5} and the solid solution (Ba{sub 0.85(1)}Sr{sub 0.15}){sub 2} Ga{sub 5}As{sub 5}. They demonstrate that such an approach would be an effective way to fine-tune the transport properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure, and properties of the rhombohedral modification of the thiospinel CuZr{sub 1.86(1)}S{sub 4}

The rhombohedral modification of the thiospinel, CuZr{sub 1.86(1)}S{sub 4}, has been synthesized by the reaction of the constituent elements in an alkali metal halide flux and structurally characterized by single crystal X-ray diffraction techniques. The title compound crystallizes in the rhombohedral space group D{sub 3d}{sup 5}-R3-barm (no. 166, a=7.3552(2) A, c=35.832(2) A, V=1678.76(13) A{sup 3}, Z=12, and R/wR=0.0239/0.0624). The structure is composed of close packed S layers, with a stacking order of ...ABCBCABABCACAB....along the c axis. The Zr and Cu atoms occupy the octahedral and tetrahedral holes between S layers, respectively. Three different kinds of S-M-S layers exist in the structure: layer I has fully occupied Zr and Cu sites, layer II has fully occupied Zr sites but no Cu, and layer III has partially occupied Zr and fully occupied Cu sites. Transport and optical properties indicate that the title compound is a small band gap (1.26 eV) n-type semiconductor. - Graphical abstract: The projected view of the rhombohedral modification, CuZr{sub 1.86(1)}S{sub 4}, down the [100] direction. Large letters denote the packing sequence of the S atoms (yellow circles) along the c axis. Zr (black circles) and Cu (red circles) atoms occupy the octahedral and tetrahedral holes, respectively, between close packed S layers.

36 MATERIALS SCIENCE↗

Screening Compounds for Fast Pyrolysis and Catalytic Biofuel Upgrading Using Artificial Neural Networks

Abstract There is significant interest among researchers in finding economically sustainable alternatives to fossil-derived drop-in fuels and fuel additives. Fast pyrolysis, a method for converting biomass into liquid hydrocarbons with the potential for use as fuels or fuel additives, is a promising technology that can be two to three times less expensive at scale when compared to alternative approaches such as gasification and fermentation. However, many bio-oils directly derived from fast pyrolysis have a high oxygen content and high acidity, indicating poor performance in diesel engines when used as fuels or fuel additives. Thus, a combination of selective fast pyrolysis and chemical catalysis could produce tuned bioblendstocks that perform optimally in diesel engines. The variance in performance for derived compounds introduces a feedback loop in researching acceptable fuels and fuel additives, as various combustion properties for these compounds must be determined after pyrolysis and catalytic upgrading occurs. The present work aims to reduce this feedback loop by utilizing artificial neural networks trained with quantitative structure-property relationship values to preemptively screen pure component compounds that will be produced from fast pyrolysis and catalytic upgrading. The quantitative structure-property relationship values selected as inputs for models are discussed, the cetane number and sooting propensity of compounds derived from the catalytic upgrading of phenol are predicted, and the viability of these compounds as fuels and fuel additives is analyzed. The model constructed to predict cetane number has a test set prediction root-mean-squared error of 9.874 cetane units, and the model constructed to predict yield sooting index has a test set prediction root-mean-squared error of 13.478 yield sooting index units (on the unified scale).

09 BIOMASS FUELS↗

Structure changes in {sup 160}Er from low to ultrahigh spin

A spectroscopic investigation of the {gamma} decays from excited states in {sup 160}Er has been performed in order to study the changing structural properties exhibited from low spin up toward ultrahigh spin (I{approx}60({h_bar}/2{pi})). The nucleus {sup 160}Er was populated by the reaction {sup 116}Cd({sup 48}Ca,4n{gamma}) at a beam energy of 215 MeV, and resulting {gamma} decays were studied using the Gammasphere spectrometer. New rotational structures and extensions to existing bands were observed, revealing a diverse range of quasiparticle configurations, which are discussed in terms of the cranked shell model. At spins around 50({h_bar}/2{pi}) there is evidence for oblate states close to the yrast line. Three rotational bands that have the characteristics of strongly deformed triaxial structures are observed, marking a return to collectivity at even higher spin. The high-spin data are interpreted within the framework of cranked Nilsson-Strutinsky calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of MWCNT Content on the Structure and Properties of Spark Plasma-Sintered Iron-MWCNT Composites Synthesized by High-Energy Ball Milling

The effect of multiwall carbon nanotube (MWCNT) content on the physical and mechanical properties of Fe-MWCNT composites has been studied. High-energy ball milling (HEBM) is employed to produce the composite powder; following this, spark plasma sintering (SPS) process has been adopted for powder consolidation. The composite powder and the sintered products were subjected to structural characterization by XRD. Microstructural studies were carried out by optical, field-emission scanning and high-resolution transmission electron microscopy. While Fourier transform infrared spectroscopic study of composites was done to understand the bonding characteristics, Raman spectroscopy was employed to assess the structural damage of MWCNT after HEBM. The effects of processing on the behavior of C-C, C-O and Fe-O bonds are studied by x-ray photoelectron spectroscopy. Microhardness and compressive strength of composites are also determined. Finally, magnetic and electrical properties of the composites were characterized. It was observed that optimized ball milling conditions help to preserve the structural identity of MWCNT. Consolidation by SPS insured good interfacial bonding. The microhardness and compression strength are significantly improved in MWCNT-reinforced iron matrix composite. MWCNT has appreciably improved the electrical conductivity of the composites. Tethering of MWCNT by iron oxide has led to appreciable improvement in saturation magnetization till 3 wt.% MWCNT.

36 MATERIALS SCIENCE↗

The Influence of High-Energy Krypton Ion Implantation Temperature on Structure and Properties of Ni–Ti Alloy

The influence of the temperature of implantation of Ni–Ti shape memory alloy with {sub 84}Kr{sup 15+}ions at the energy E = 147 MeV on its structural-phase state is investigated. At the implantation temperatures 250 and 300°С, within the projective range Rp and out-range area the following processes and phenomena are observed: new formation of the martensitic В19'-phase, formation of nano-sized particles of the R-phase, increase in resistivity due to the formation of radiation-defect structures, strengthening of the alloy in the austenitic structural-phase state, and longer phase-transition temperature intervals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, crystal structure and properties of a novel tetra-nuclear Cu complex of ANPyO

A transition metal Cu complex with 2,6-diamino-3,5-dinitropyridine-N-oxide (ANPyO) ligand has been synthesized and its crystal structure has been analyzed by X-ray diffraction methods. The crystal belongs to Triclinic system with space group P-1. The cell parameters are a=8.6710(17) nm, b=11.226(2) nm, c=18.741(4) nm, {alpha}=98.26(3), {beta}=102.60(3), {gamma}=109.17(3), V=1635.1(6) nm{sup 3}, D{sub c}=1.957 g/cm{sup 3}, {mu}=2.663 mm{sup -1}, F(000)=968, Z=2, R{sub 1}=0.0764, WR{sub 2}=0.1608. The thermal decomposition process of the title complex was studied by means of the TG-DTG and DSC at a heating rate of 20 K/min. It consists of two slow endothermic peaks and one violent exothermic peak with 37.22% residues. The apparent activation energy and pre-exponential factor of the complex in thermal decomposition process were calculated by means of the Kissinger method and Ozawa-Doyle method. The thermal decomposition of AP was accelerated due to the catalyst of the complex, it suggests that the complex can provide theoretical support to further performance study as it is added to the propellant formulations to regulate the burning rate. - Graphical abstract: A novel tetra-nuclear Cu complex of ANPyO was synthesized and its molecular structure was measured. Highlights: Black-Right-Pointing-Pointer We have synthesized and characterized a new tetra-nuclear Cu complex. Black-Right-Pointing-Pointer We have measured its molecular structure and thermal decomposition. Black-Right-Pointing-Pointer A special coordination mode between ligand and central copper atoms has been obtained. Black-Right-Pointing-Pointer It provides theoretical support to further performance study as energetic catalyst.

36 MATERIALS SCIENCE↗

Investigation of the structure and properties of boron-containing coatings obtained by electron-beam treatment

An investigation of surface-hardened materials obtained by cladding with an electron beam injected into the air atmosphere was carried out. Structural investigations of coatings revealed that an increase in boron carbide concentration in a saturating mixture contributed to a rise of a volume fraction of iron borides in coatings. The maximum hardened depth reached 2 mm. Hardened layers were characterized by the formation of heterogeneous structure which consisted of iron borides and titanium carbides distributed uniformly in the eutectic matrix. Areas of titanium boride conglomerations were detected. It was found that an increase in the boron carbide content led to an enhancement in hardness of the investigated materials. Friction testing against loosely fixed abrasive particles showed that electron-beam cladding of powder mixtures containing boron carbides, titanium, and iron in air atmosphere allowed enhancing a resistance of materials hardened in two times.

36 MATERIALS SCIENCE↗

Revealing the Nano-Scale Structure and Properties of Pinholes in SiOx Layers for POLO Contacts

In this contribution, we report on the charge collection characteristics of silicon photovoltaic devices with passivated contacts based on the c-Si/SiOx /poly-Si structure. Using electron-beam induced current (EBIC) imaging in plan-view and cross-section orientations, we find that charge collection in a device with a 1.5-nm-thick SiOx layer is fairly uniform in the p-n junction region and does not appear to be influenced by pyramidal surface texture. In contrast, a device with a 2.2-nm-thick oxide layer shows significant spatial variation in the charge-collection signal. The locations where we observe preferential collection of excess carriers is very sensitive to the processing conditions used to grow and breakup the SiOx passivation layer. In some cases the apexes of the pyramids exhibit reduced EBIC signal as the valleys between adjacent pyramids show the strongest collection. Other conditions yield enhanced charge collection at well defined spots on pyramid faces with no observable collection in the valleys.

EBIC↗

Engineering on-chip nanoporous gold material libraries via precision photothermal treatment [Precision Photothermal Annealing of Nanoporous Gold Thin Films for the Microfabrication of a Single-ship Material Libraries]

Single-chip material libraries of thin films of nanostructured materials are a promising approach for high throughput studies of structure-property relationship in the fields of physics and biology. Nanoporous gold (np-Au), produced by an alloy corrosion process, is a nanostructured material of specific interest in both these fields. One attractive property of np-Au is its self-similar coarsening behavior by thermally induced surface diffusion. However, traditional heat application techniques for the modification of np-Au are bulk processes that cannot be used to generate a library of different pore sizes on a single chip. Laser micromachining offers an attractive solution to this problem by providing a means to apply energy with high spatial and temporal resolution. In our present study we use finite element multiphysics simulations to predict the effects of laser mode (continuous-wave vs. pulsed) and supporting substrate thermal conductivity on the local np-Au film temperatures during photothermal annealing and subsequently investigate the mechanisms by which the np-Au network is coarsening. Our simulations predict that continuous-wave mode laser irradiation on a silicon supporting substrate supports the widest range of morphologies that can be created through the photothermal annealing of thin film np-Au. Using this result we successfully fabricate a single-chip material library consisting of 81 np-Au samples of 9 different morphologies for use in increased throughput material interaction studies.

36 MATERIALS SCIENCE↗

The structural and magnetic properties of Pr{sub 1−x}Er{sub x}Al{sub 2}

We report on the effect of Er addition to PrAl{sub 2} on the lattice parameters, magnetic behavior, heat capacity, and magnetocaloric effect by using x-ray diffraction, magnetization, and heat capacity measurements. Unlike Pr{sub 0.6}Er{sub 0.4}Al{sub 2}, other alloys we studied in the pseudobinary (Pr{sub 1−x}Er{sub x})Al{sub 2} system do not exhibit a sharp peak in heat capacity with the application of magnetic field. Both the cubic lattice parameter and the Curie temperature decrease with increasing Er concentration. The nuclear specific heat coefficient decreases from 660 mJ K mol{sup −1} for x = 0.05 to a nearly negligible value for x = 0.95. The magnetic entropy and adiabatic temperature change varies from 2 to 4 J mol{sup −1} K{sup −1} and 2.5 to 5 K at ΔH = 20 kOe for x = 0.05 to 0.95, respectively. These values of the magnetocaloric effect are comparable to those of the other rare-earth dialuminides systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Recent progress in understanding solid electrolyte interphase on lithium metal anode

Lithium (Li) metal batteries (LMBs) are among the most promising candidates of next-generation high-energy-density rechargeable batteries. Solid electrolyte interphase (SEI) on Li metal anode plays a significant role which influences the Li deposition morphology and the cycle life of LMBs. Although SEI is the most important part, a thorough understanding of SEI is inadequate. In this review, we focus on the progresses of understanding on structures, properties and influencing factors of SEI as well as efficient strategies of tailoring SEI. First, the compositions, models and recent progresses on characterizing atomic structure of SEI are summarized. Second, the properties of SEI, including electronic conduction, ionic conduction, stability and mechanical properties are elucidated. Structures and properties of SEI are greatly influenced by multiple factors such as solvent, salt, additive, solvation structure, impurity, current density, temperature, pressure and capacity utilization. Thus, interactions between these factors and SEI are comprehensively discussed. Correlations of SEI with Li deposition morphology, rate capability and cycle life are further summarized. Moreover, efficient strategies of tailoring SEI with desired properties, including in-situ SEI and ex-situ SEI are also reviewed. Despite the significant progresses that have been achieved in the researches of SEI, better understanding of SEI is still highly demand. Finally, future directions especially in-operando techniques, multi-modality approaches for characterization of SEI and artificial intelligence assisted understanding of correlation between electrolyte components and SEI properties are proposed.

Wu, Haiping↗

Synthesis, crystal structure and properties of [(dien){sub 2}Mn]Ge{sub 2}S{sub 4} with mixed-valent Ge centers

One new manganese thiogermanate, [(dien){sub 2}Mn]Ge{sub 2}S{sub 4} (dien=diethylenetriamine), was prepared under mild solvothermal conditions and structurally and spectroscopically characterized. The title compound crystallizes in the orthorhombic system, chiral space group P2{sub 1}2{sub 1}2{sub 1} (no. 19) with a=9.113(4) Å, b=12.475(5) Å, c=17.077(7) Å, V=1941.5(15) Å{sup 3} and Z=4. Its structure features a three-dimensional (3D) network composed of a one-dimensional (1D) [Ge{sub 2}S{sub 4}]{sup 2−} anionic chain and a [(dien){sub 2}Mn]{sup 2+} complex interconnected via various hydrogen bonds. The most interesting structural feature of the compound is the presence of two different oxidation states of germanium centers in the 1D [Ge{sub 2}S{sub 4}]{sup 2−} chain, which is also supported by the result of X-ray photoelectron spectroscopy measurement. The optical property of the title compound has also been studied by UV–vis spectra. - Graphical abstract: One new thiogermanate, [(dien){sub 2}Mn]Ge{sub 2}S{sub 4}, contains a one-dimensional [Ge{sub 2}S{sub 4}]{sup 2−} anionic chain with two different oxidation states of germanium centers. Display Omitted - Highlights: • One new manganese thiogermanate [(dien){sub 2}Mn]Ge{sub 2}S{sub 4} was prepared. • The compound features 1D [Ge{sub 2}S{sub 4}]{sup 2−} chain composed of [Ge{sup II}S{sub 4}] and [Ge{sup IV}S{sub 4}] tetrahedra. • The first example of inorganic–organic hybrid thiogermanates with mixed valent Ge centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗