Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Continuous cross-over from ferroelectric to relaxor state and piezoelectric properties of BaTiO{sub 3}-BaZrO{sub 3}-CaTiO{sub 3} single crystals

Optimal properties like piezoelectricity can be found in polarizable materials for which the structure changes sharply under small composition variations in the vicinity of their morphotropic phase boundary or the triple point in their isobaric temperature-composition phase diagram. In the latter, lead-free (Ba{sub 0.850}Ca{sub 0.150})(Ti{sub 0.900}Zr{sub 0.100})O{sub 3} ceramics exhibit outstanding piezoelectric coefficients. For the first time, we report the growth of piezoelectric lead-free single crystals in the BaTiO{sub 3}-BaZrO{sub 3}-CaTiO{sub 3} pseudo-ternary system. The stoichiometry control in the CaO-BaO-TiO{sub 2}-ZrO{sub 2} solid solution led to single crystals with various compositions ranging from (Ba{sub 0.857}Ca{sub 0.143})(Ti{sub 0.928}Zr{sub 0.072})O{sub 3} to (Ba{sub 0.953}Ca{sub 0.047})(Ti{sub 0.427}Zr{sub 0.573})O{sub 3}. We evidenced a continuous cross-over from a ferroelectric state at high titanium content to a relaxor one on increasing the zirconium content. Such a property tuning is rather seldom observed in lead-free ferroelectrics and confirms what was already reported for ceramics. Single crystal with (Ba{sub 0.838}Ca{sub 0.162})(Ti{sub 0.854}Zr{sub 0.146})O{sub 3} composition, which has been grown and oriented along [001] crystallographic direction, displayed electromechanical coefficients d{sub 31} and k{sub 31} of 93 pC.N{sup −1} and 0.18, respectively, near the room temperature (T = 305 K)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reduced dimension rovibrational variational calculations of the S{sub 1} state of C{sub 2}H{sub 2}. II. The S{sub 1} rovibrational manifold and the effects of isomerization

Reduced dimension variational calculations have been performed for the rovibrational level structure of the S{sub 1} state of acetylene. The state exhibits an unusually complicated level structure, for various reasons. First, the potential energy surface has two accessible conformers, trans and cis. The cis conformer lies about 2700 cm{sup −1} above the trans, and the barrier to cis-trans isomerization lies about 5000 cm{sup −1} above the trans minimum. The trans vibrations ν{sub 4} (torsion) and ν{sub 6} (asym. bend) interact very strongly by Darling-Dennison and Coriolis resonances, such that their combination levels and overtones form polyads with unexpected structures. Both conformers exhibit very large x{sub 36} cross-anharmonicity since the pathway to isomerization is a combination of ν{sub 6} and ν{sub 3} (sym. bend). Near the isomerization barrier, the vibrational levels show an even-odd K-staggering of their rotational levels as a result of quantum mechanical tunneling through the barrier. The present calculations address all of these complications, and reproduce the observed K-structures of the bending and C–C stretching levels with good qualitative accuracy. It is expected that they will assist with the assignment of the irregular patterns near the isomerization barrier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanism of acoustically induced diffusional structuring of surface adatoms

Physical mechanisms of time-averaged structuring of adatoms induced by a standing surface acoustic wave (SAW) on a solid substrate are studied. Despite some similarity with conventional mechanisms based on averaging of fast oscillation-type motion or radiation-pressure effects, we demonstrate that, for diffusional (i.e., strongly damped) adatom motion, the origin of time-averaged structuring is essentially different. The proposed analytical model and kinetic Monte–Carlo (kMC) simulations reveal several distinct structuring regimes and directly relate them to the transient modification of diffusion barriers and adiabatic temperature variations induced by SAW strains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Real-time tracking of structural evolution in 2D MXenes using theory-enhanced machine learning

In situ Electron Energy Loss Spectroscopy (EELS) combined with Transmission Electron Microscopy (TEM) has traditionally been pivotal for understanding how material processing choices affect local structure and composition. However, the ability to monitor and respond to ultrafast transient changes, now achievable with EELS and TEM, necessitates innovative analytical frameworks. Here, we introduce a machine learning (ML) framework tailored for the real-time assessment and characterization of in operando EELS Spectrum Images (EELS-SI). We focus on 2D MXenes as the sample material system, specifically targeting the understanding and control of their atomic-scale structural transformations that critically influence their electronic and optical properties. This approach requires fewer labeled training data points than typical deep learning classification methods. By integrating computationally generated structures of MXenes and experimental datasets into a unified latent space using Variational Autoencoders (VAE) in a unique training method, our framework accurately predicts structural evolutions at latencies pertinent to closed-loop processing within the TEM. This study presents a critical advancement in enabling automated, on-the-fly synthesis and characterization, significantly enhancing capabilities for materials discovery and the precision engineering of functional materials at the atomic scale.

47 OTHER INSTRUMENTATION↗

Alloying multiple halide perovskites on the same sublattice in search of stability and target band gaps

Single-component halide perovskites (HPs) rarely satisfy all the necessary criteria for optoelectronic applications, such as achieving an optimal band gap while maintaining high chemical and structural stability. Alloying halide perovskites has emerged as a promising strategy, not only to enhance stability but also to fine-tune their electronic and optical properties. In this work, we explore multiple degrees of freedom in alloy design, considering different substitution sublattices sites (A, B, or X in ABX3 perovskites), various chemical species (isovalent and hetero-valent elements), and multi-component compositions on a given sublattice. Using first-principles calculations based on density functional theory (DFT), we investigate how compositional variations influence the electronic (band gap) and structural properties (mixing enthalpy) of HP alloys. Our approach employs the polymorphous cell model, allowing full local relaxation which breaks local symmetry while preserving global cubic symmetry—an essential framework for accurately modeling HPs. Our results reveal that X-site mixing (halogen substitution) primarily affects the valence band maximum, allowing target band gap engineering. Additionally, variations in halogen radii introduce internal strain through octahedral distortions, influencing the mixing enthalpy. A-site substitution, while not directly contributing to the band edge states, modifies structural stability via volume effects, indirectly impacting the band gap. B-site alloying plays a dominant role in band gap modulation, leading to either positive or negative band gap bowing. Specifically, isovalent B-site mixing (Sn–Pb) induces strong positive bowing, where the alloy band gap is smaller than the average gap of parent compounds, whereas hetero-valent mixing (Cd–Pb) results in pronounced negative bowing. As an aside, we investigate the competition between the excess energy of disordered alloys vs. that of long-range ordered double perovskites of the same compositions, seeking examples of ordered phases emerging from disordered alloys. Furthermore, our findings provide fundamental insights into the electronic and structural behavior of HP alloys, offering valuable design principles for the development of stable and efficient materials for next-generation photovoltaic and optoelectronic devices.

14 SOLAR ENERGY↗

Isovalent Alloying and Heterovalent Substititution as Routes to Accelerate the Development and Optimization of Super-Efficient Halide Perovskite PV Solar Cells

Halide perovskites represent one of the fastest growing photovoltaic (PV) device technologies in the last decade, with research efficiencies among the highest confirmed. However, the research needed to advance tandem perovskite solar cells requires a specialized understanding base, but there is no such base for this young group of materials with the same depth as in semiconductor alloy research. Whereas IV-IV, II-V and II-VI semiconductors have a sophisticated science foundation refined over decades due of their use in electronics, lasers, LEDs and night vision applications, this is not yet the case for halide perovskites. At the same time, these materials behave rather differently than conventional semiconductors. Within the rapidly unfolding field of PV, the emerging halide-perovskite alloy research has largely been based on empiricism. Clearly, a concerted and comprehensive application to halide perovskite alloys of the modern quantum theory of solids brought us over the years a broad understanding of the critical factors enabling conventional inorganic PV could leapfrog the Edisonian, trial-and-error search for solutions to critical problems that are poorly understood. These theory approaches are required to accelerate the progress toward commercially ready hybrid-perovskites by providing a theory-guided experiment component to the EERE investments in this high-priority R&D. During this project we have studied three different rungs on the ladder of knowledge about hybrid perovskites. This kind of single halide perovskites represent the first level of development (rung 1) of solar cells, and includes materials such as APbI 3 , ASnI 3 , APbBr 3 , ASnBr 3 with different A cations, such as methylammonium (MA) with formamidinium (FM). Rung 2 is obtained by mixing B cations (Sn and Pb), and X anions (Cl and Br or I) producing a disordered alloy (A, A’)(M,M’)(X,X’) 3 -space. The most advanced rung corresponds to heterovalent-substitution of halide perovskites, creating an ordered double-perovskite compound. Although the focus of the project was on Rungs 2 and 3, we have made important discoveries regarding the nature of pure perovskites. We’ve observed that cubic perovskites should be modeled by a polymorphous network, instead of the basic single unit cell approach. This leads to the conclusion that perovskites have a fluid-like nature. An article regarding this work has been submitted to Nature Materials. Using the approach described above, we have also simulated alloys of halide perovskites, representing rung 2. We have focused on mixtures of [Cs,FA][Sn,Pb]I 3 with different concentrations, being able to disentangle the structural and electronic factors that determines the variation (bowing) of properties such as band gaps, mixing enthalpies and decomposition energies. For rung 3 compounds, we’ve closely interacted with experimental groups clarifying the chemical routes to obtain a certain compound, and what should be the most stable structure for them. As the final product, and consequent dissemination of the research, we’ve submitted two papers for publication, that are currently under evaluation. The interaction with experimental groups was also an important focus. We have participated in several local, national and international meetings, and reached out more closely to groups from CU Boulder and Arkansas.

14 SOLAR ENERGY↗

Closed‐Loop Recycling of Poly(pentylene Adipate‐ co ‐Terephthalate) via Amine‐Catalyzed Methanolysis

Advancing circularity through effective chemical recycling strategies is essential for enabling the sustainable use of emerging biodegradable polyesters in film applications. In this context, poly(pentylene adipate-co-terephthalate) with a 40/60 adipate-to-terephthalate ratio (PPeAT60), a significantly stiffer and partially biobased copolyester recently reported by our team, offers improved mechanical performance and processability compared to commercial poly(butylene adipate-co-terephthalate), while providing a platform to evaluate advanced recycling approaches for film applications. Here, this study describes depolymerization of PPeAT60 through amine-catalyzed methanolysis, followed by the repolymerization of the recovered monomers. The resulting repolymerized material exhibited a molar mass distribution, chemical structure, and thermal stability comparable to the virgin polymer, confirming the technical feasibility of the methanolysis-based recycling route. Both polymers displayed nearly identical melting, glass transition, and decomposition temperatures, crystallinity, and modulus, demonstrating full structural and mechanical reproducibility after recycling. Variations in crystallization kinetics, elongation at break, and barrier properties likely arise from trace impurities (<1%) introduced during processing acting as nucleating and stress-inducing agents. Overall, these results demonstrate that PPeAT60 retains its key properties after chemical recycling, establishing methanolysis as a promising platform for recycling of this partially biobased polymer that may be able to replace both conventional polyolefins and PBAT in flexible packaging applications.

09 BIOMASS FUELS↗

Engineering highly stable variants of Corynactis californica green fluorescent proteins

Fluorescent proteins (FPs) are versatile biomarkers that facilitate effective detection and tracking of macromolecules of interest in real time. Engineered FPs such as superfolder green fluorescent protein (sfGFP) and superfolder Cherry (sfCherry) have exceptional refolding capability capable of delivering fluorescent readout in harsh environments where most proteins lose their native functions. Our recent work on the development of a split FP from a species of strawberry anemone, Corynactis californica, delivered pairs of fragments with up to threefold faster complementation than split GFP. We present the biophysical, biochemical, and structural characteristics of five full-length variants derived from these split C. californica GFP (ccGFP). These ccGFP variants are more tolerant under chemical denaturation with up to 8 kcal/mol lower unfolding free energy than that of the sfGFP. It is likely that some of these ccGFP variants could be suitable as biomarkers under more adverse environments where sfGFP fails to survive. A structural analysis suggests explanations of the variations in stabilities among the ccGFP variants.

59 BASIC BIOLOGICAL SCIENCES↗

Improved Electrochemical Performance of Plasma Electrolytic Oxidation Coating on Titanium in Simulated Body Fluid

The effect of plasma electrolytic oxidation (PEO) pre-treatments on corrosion behavior of titanium in simulated body fluid (SBF) is investigated. Three pre-treatments are compared, using silicate, calcium phosphate and mixed silicate and calcium phosphate (1:1) electrolytes, respectively. The resultant coatings in different compositions and morphologies were examined by high-resolution field emission scanning electron microscopy equipped with energy-dispersive spectrometer and x-ray diffraction. The PEO-treated specimens revealed distribution of coating species, mainly the titanium-rich inner coating region. However, findings show highly localized variations in composition within their crystalline structures, due to the melting and rapid solidification of the coating material in three different electrolytes. Corrosion behavior of the coatings was also examined in SBF at 37 °C by potentiodynamic polarization, revealing an improvement in corrosion resistance for mixed electrolyte compared to silicate and calcium phosphate electrolytes.

36 MATERIALS SCIENCE↗

Multiscale mechanical design of the lightweight, stiff, and damage-tolerant cuttlebone: A computational study

Cuttlebone, the endoskeleton of cuttlefish, offers an intriguing biological structural model for designing low-density cellular ceramics with high stiffness and damage tolerance. Cuttlebone is highly porous (porosity ~93%) and lightweight (density less than 20% of seawater), constructed mainly by brittle aragonite (95 wt%), but capable of sustaining hydrostatic water pressures over 20 atmospheres and exhibits energy absorption capability under compression comparable to many metallic foams (~4.4 kJ/kg). Here, in this work, we computationally investigate how such remarkable mechanical efficiency is enabled by the multiscale structure of cuttlebone. Using the common cuttlefish, Sepia Officinalis, as a model system, we first conducted high-resolution synchrotron micro-computed tomography (µ-CT) and quantified the cuttlebone's multiscale geometry, including the 3D asymmetric shape of individual walls, the wall assembly patterns, and the long-range structural gradient of walls across the entire cuttlebone (ca. 38 chambers). The acquired 3D structural information enables systematic finite-element simulations, which further reveal the multiscale mechanical design of cuttlebone: at the wall level, wall asymmetry provides optimized energy absorption while maintaining high structural stiffness; at the chamber level, variation of walls (number, pattern, and waviness amplitude) contributes to progressive damage; at the entire skeletal level, the gradient of chamber heights tailors the local mechanical anisotropy of the cuttlebone for reduced stress concentration. Our results provide integrated insights into understanding the cuttlebone's multiscale mechanical design and provide useful knowledge for the designs of lightweight cellular ceramics.

36 MATERIALS SCIENCE↗

The study of disorder and nanocrystallinity in C-S-H, supplementary cementitious materials and geopolymers using pair distribution function analysis

Significant progress was achieved with the application of Rietveld method to characterize the crystalline phases in portland cement paste. However, to obtain detailed information on the amorphous or poorly crystalline phases, it is necessary to analyze the total scattering data. The pair distribution function (PDF) method has been successfully used in the study of liquids and amorphous solids. The method takes the Sine Fourier transform of the measured structure factor over a wide momentum transfer range, providing a direct measure of the probability of finding an atom surrounding a central atom at a radial distance away. The obtained experimental characteristic distances can be also used to validate the predictions by the theoretical models, such as, molecular dynamics, ab initio simulations and density functional theory. The paper summarizes recent results of PDF analysis on silica fume, rice husk ash, fly ash, ASR gel, C-S-H and geopolymers.

36 MATERIALS SCIENCE↗

Effects of various parameters of different porous transport layers in proton exchange membrane water electrolysis

Porous transport layers (PTLs) play an important role in proton exchange membrane water electrolysis (PEMWE) cells. The PTL facilitates water and gas transport, as well as thermal and electrical conduction, and is required to sustain good contact with adjacent components. It is expected that using PTLs with variations in material properties such as structure, composition, thickness and wettability results in performance changes of the PEMWE. Here, a general mathematical PEMWE model is developed that separates and analyzes the contributions of ohmic, activation, diffusion and Nernst potentials. For model validation, three inherently different anode PTL structures (carbon paper, sintered titanium particles, and titanium felt) are operated over a range of conditions. Additionally, the effects of PTL wettability were used to verify the model using Polytetrafluoroethylene (PTFE) treated Toray papers with PTFE loading ranging from 0% to 20%. The modeling results of both PTFE treated and untreated materials show good agreement with the experimental data. Mass transport or diffusion loss is the primary reason for performance differences between PTFE treated and untreated PTLs. Sintered titanium PTLs with thicknesses above 1 mm suffer from up to 33% increased ohmic losses without indicating any obvious changes in activation and diffusion losses when compared to untreated PTLs. The losses of the cell increase when using PTFE treated Toray paper. Individual contributions are quantified and assigned to increased ohmic, activation, and diffusion losses. In conclusion, the proposed model offers insights into the overpotential contributions of a PEMWE. It is a useful tool for predicting performance of various PTL materials and can be applied for PTL development and optimization efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Are we modeling the properties of unconventional shales correctly?

Technological advancements have led to impressive growth in hydrocarbon (HC) production from unconventional shale reservoirs. However, major limiting factors in shale gas development are i) low recovery of gas in place (<20%), (ii) a rapid decline in well productivity, iii) release of contaminants, despite the use of advanced hydraulic fracturing fluids and multiple fracturing stages. This is mainly due to a lack of understanding of the nanoscale physicochemical properties of shales, especially that of kerogen, the macromolecule that is not only the source of the majority of the HC’s in shales but also holds most of the HC’s in adsorbed state. Over the last few years, a large number of studies have been published on simulating the physicochemical properties of shale utilizing molecular models of kerogen. However, the molecular models of kerogen input into these simulations are based on the kerogen “type” derived from a very limited number of shale samples. In this paper, we examine the variations that can exist in kerogen structure within a particular kerogen “type” across different shale basins and single shale basin at similar thermal maturity levels. We propose that using kerogen “type” based structural models for molecular simulations could lead to inaccurate estimation of HC reserves, HC recovery, HC production, frackability, and quantity and quality of produced water. Our study highlights the need for developing a better classification of kerogen based on its “molecular structure” instead of “type” for a more accurate prediction of physicochemical properties of shales.

04 OIL SHALES AND TAR SANDS↗

Exploring density and strength variations in asteroid 16 Psyche’s composition with 3D hydrocode modeling of its deepest impact structure

Asteroid 16 Psyche is the largest metallic Main Belt Asteroid and is the subject of a forthcoming NASA mission. The composition of Psyche is still unknown and subject of recent debate. In particular, how much porosity is within Psyche, along with how much of Psyche consists of non-metallic versus metallic materials, are central questions to the issue of Psyche’s composition. If Psyche is indeed predominantly composed of metallic materials, it would need to have considerable porosity (~ 30%–50%) for a composition consistent with its expected bulk density (~ 3.7–4.1 g/cm). In this work, we vary the density and strength of Psyche by including uniform and layered fields of pseudo-microporosity, in addition to investigating the presence of macroscopic voids, i.e., spaces larger than the size of the simulation’s mesh cells, in rubble-pile configurations. Further, all configurations result in bulk densities within the uncertainties of measured values, however the strength of Psyche and the distribution of pseudo-pores are varied. Through 3D computational models of Psyche’s deepest impact structure, we show that Psyche’s composition is unlikely to contain only pseudo-microporosity. Rather, rubble pile structures, which include macroscopic voids, are shown to match the crater’s measured aspect ratio better than simulations of structures that included only pseudo-microporosity.

3D↗

Multi-mode evaluation of power-maximizing cross-flow turbine controllers

A general method for predicting and evaluating the performance of three candidate cross-flow turbine power-maximizing controllers is presented in this paper using low-order dynamic simulation, scaled laboratory experiments, and full-scale field testing. For each testing mode and candidate controller, performance metrics quantifying energy capture (ability of a controller to maximize power), variation in torque and rotation rate (related to drive train fatigue), and variation in thrust loads (related to structural fatigue) are quantified for two purposes. First, for metrics that could be evaluated across all testing modes, we considered the accuracy with which simulation or laboratory experiments could predict performance at full scale. Second, we explored the utility of these metrics to contrast candidate controller performance. For these turbines and set of candidate controllers, energy capture was found to only differentiate controller performance in simulation, while the other explored metrics were able to predict performance of the full-scale turbine in the field with various degrees of success. Finally, effects of scale between laboratory and full-scale testing are considered, along with recommendations for future improvements to dynamic simulations and controller evaluation.

13 HYDRO ENERGY↗

Synthesis, structure and luminescence properties of lanthanide complex with a new tetrapodal ligand featuring salicylamide arms

A new tetrapodal ligand 1,1,1-tetrakis{l_brace}[(2'-(2-furfurylaminoformyl))phenoxyl]methyl{r_brace}methane (L) has been prepared and their coordination chemistry with Ln{sup III} ions has been investigated. The structure of {l_brace}[Ln{sub 4}L{sub 3}(NO{sub 3}){sub 12}].H{sub 2}O{r_brace}{sub i}nfinity (Ln=Nd, Eu)] shows the binodal 4,3-connected three-dimensional interpenetration coordination polymers with topology of a (8{sup 6}){sub 3}(8{sup 3}){sub 4} notation. [DyL(NO{sub 3}){sub 3}(H{sub 2}O){sub 2}].0.5CH{sub 3}OH and [ErL(NO{sub 3}){sub 3}(H{sub 2}O) (CH{sub 3}OH)].CH{sub 3}COCH{sub 3} is a 1:1 mononuclear complex with interesting supramolecular features. The structure of [NdL(H{sub 2}O){sub 6}].3ClO{sub 4}.3H{sub 2}O is a 2:1 mononuclear complex which further self-assembled through hydrogen bond to form a three-dimensional supramolecular structures. The result presented here indicates that both subtle variation of the terminal group and counter anions can be applied in the modulation of the overall molecular structures of lanthanide complex of salicylamide derivatives due to the structure specialties of this type of ligand. The luminescence properties of the Eu{sup III} complex are also studied in detail. - Grapical Abstract: We present here a series of zero- to three-dimensional lanthanide coordination structures and luminescence properties of Eu(III) complex of a new tetrapodal ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and phase composition characterization in a Co{sub 38}Ni{sub 33}Al{sub 29} ferromagnetic shape memory alloy

Transmission electron microscopy was performed to investigate the microstructures of a secondary phase and its surrounding matrix in a Co{sub 38}Ni{sub 33}Al{sub 29} ferromagnetic shape memory alloy. The secondary phase shows a γ′ L1{sub 2} structure exhibiting a dendritic morphology with enclosed B2 austenite regions while the matrix shows the L1{sub 0} martensitic structure. A secondary phase-austenite-martensite sandwich structure with residual austenite ranging from several hundred nanometers to several micrometers wide is observed at the secondary phase-martensite interface due to the depletion of Co and enrichment of Al in the chemical gradient zone and the effect of the strong martensitic start temperature dependency of the element concentrations. The crystallographic orientation relationship of the secondary phase and the B2 austenite fits the Kurdjumov-Sachs relationship. - Highlights: •The secondary phase has a γ′ L1{sub 2} structure exhibiting a dendritic morphology. •A secondary phase-austenite-martensite sandwich structure is observed. •The structural sandwich structure is due to elemental composition variation. •The secondary phase and the B2 austenite fit the Kurdjumov-Sachs relationship.

36 MATERIALS SCIENCE↗