Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Two-particle Bose–Einstein correlations in pp collisions at √s=0.9 and 7 TeV measured with the ATLAS detector

The paper presents studies of Bose–Einstein Correlations (BEC) for pairs of like-sign charged particles measured in the kinematic range pT> 100 MeV and |η|< 2.5 in proton collisions at centre-of-mass energies of 0.9 and 7 TeV with the ATLAS detector at the CERN Large Hadron Collider. The integrated luminosities are approximately 7 μb -1 , 190 μb -1 and 12.4 nb -1 for 0.9 TeV, 7 TeV minimum-bias and 7 TeV high-multiplicity data samples, respectively. The multiplicity dependence of the BEC parameters characterizing the correlation strength and the correlation source size are investigated for charged-particle multiplicities of up to 240. A saturation effect in the multiplicity dependence of the correlation source size parameter is observed using the high-multiplicity 7 TeV data sample. In conclusion, the dependence of the BEC parameters on the average transverse momentum of the particle pair is also investigated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

MGS MAG/ER Data Analysis Using a Time and Magnetic Field Dependent Electron Transport Model

The goal of that project was to examine certain details about the dayside electron environment at Mars as seen by the Mars Global Surveyor (MGS) magnetometer/electron reflectometer (MAG/ER) instrument. Specifically, we stated that we would use the Khazanov and Liemohn (K&L) kinetic electron transport model to analyze features in the observations. This code includes a non-uniform magnetic field and time-dependence in the result (different from most other models of this type). It was originally developed for electron motion along field lines in the Earth's magnetosphere (between conjugate ionospheres), and is thus quite appropriate for application to the Mars magnetic field scenario. Numerous code developments were implemented and the Mars version of the K&L model is fully operational. Initial results from this code have focused on the examination of MGS MAG/ER observations in the crustal field region when it is on the dayside. After several presentations at scientific meetings, this study culminated in a JGR publication last year.

Liemohn, Michael W.↗

Developing a Standard for Earth Observation Data Preservation Content - A Path to Future Usability

For datasets to be usable, many pieces of information in addition to the data themselves are essential. During the active parts of the lifecycle of dataset generating projects, the needed information is usually accessible through individuals familiar with the various aspects of the projects. However, the utility of datasets tends to outlive the lives of projects, by several decades in many cases. Thus it is essential to capture all the relevant information about the datasets, data, metadata and associate knowledge that is sufficient to read, understand, interpret and reuse the datasets, while the projects are still active. The capture and preservation should be such that the data are usable when no consultation is available from the original project participants. Identification of specific categories of content through an international standard is beneficial to the user communities of the future, so that projects involving Earth observations and generating data products can consistently plan for preservation and future usability of the project outcomes. While there are existing standards that address archival and preservation in general, there are no existing international standards or specifications today to address what content should be preserved. The standard, ISO 19165-1, titled "Geographic Information - Preservation of digital data and metadata Part 1: Fundamentals" considers geographic information preservation in general. It acknowledges that "specific content items needed to preserve the full provenance and context of the data and associated metadata depend on the needs of the designated community and types of datasets (e.g., maps, remotely sensed data from satellites and airborne instruments, physical samples). Follow-up parts to this standard may be developed detailing content items appropriate to individual disciplines." NASA proposed an extension to this standard, titled "Geographic information -- Preservation of digital data and metadata -- Part 2: Content specifications for Earth observation data and derived digital products." The development of this extension is in progress with participation by an international team representing nine countries. The purpose of this paper is to introduce this standard and report on its status.

Remote Sensing; Data Systems; Open Data;↗

Chaining direct memory access data transfer operations for compute nodes in a parallel computer

Methods, systems, and products are disclosed for chaining DMA data transfer operations for compute nodes in a parallel computer that include: receiving, by an origin DMA engine on an origin node in an origin injection FIFO buffer for the origin DMA engine, a RGET data descriptor specifying a DMA transfer operation data descriptor on the origin node and a second RGET data descriptor on the origin node, the second RGET data descriptor specifying a target RGET data descriptor on the target node, the target RGET data descriptor specifying an additional DMA transfer operation data descriptor on the origin node; creating, by the origin DMA engine, an RGET packet in dependence upon the RGET data descriptor, the RGET packet containing the DMA transfer operation data descriptor and the second RGET data descriptor; and transferring, by the origin DMA engine to a target DMA engine on the target node, the RGET packet.

Archer, Charles J↗

Data communications for a collective operation in a parallel active messaging interface of a parallel computer

Algorithm selection for data communications in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI composed of data communications endpoints, each endpoint including specifications of a client, a context, and a task, endpoints coupled for data communications through the PAMI, including associating in the PAMI data communications algorithms and bit masks; receiving in an origin endpoint of the PAMI a collective instruction, the instruction specifying transmission of a data communications message from the origin endpoint to a target endpoint; constructing a bit mask for the received collective instruction; selecting, from among the associated algorithms and bit masks, a data communications algorithm in dependence upon the constructed bit mask; and executing the collective instruction, transmitting, according to the selected data communications algorithm from the origin endpoint to the target endpoint, the data communications message.

97 MATHEMATICS AND COMPUTING↗

Data communications for a collective operation in a parallel active messaging interface of a parallel computer

Algorithm selection for data communications in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI composed of data communications endpoints, each endpoint including specifications of a client, a context, and a task, endpoints coupled for data communications through the PAMI, including associating in the PAMI data communications algorithms and bit masks; receiving in an origin endpoint of the PAMI a collective instruction, the instruction specifying transmission of a data communications message from the origin endpoint to a target endpoint; constructing a bit mask for the received collective instruction; selecting, from among the associated algorithms and bit masks, a data communications algorithm in dependence upon the constructed bit mask; and executing the collective instruction, transmitting, according to the selected data communications algorithm from the origin endpoint to the target endpoint, the data communications message.

97 MATHEMATICS AND COMPUTING↗

Ecological Resource Value, Remediation Options, and Impacts: Functional Remediation at Hanford Site - 17226

Governmental agencies, Tribes, regulators, resource trustees and other stakeholders are interested in understanding the risk to the environment from remediation and restoration, particularly at large DOE sites with complex remediation tasks lasting decades. While each remediation project has the usual environmental impact assessment that include risk to eco-receptors, a piece-meal approach to examining the effect of remediation does not provide an overview of remaining tasks that would aid in sequencing these tasks. The Consortium for Risk Evaluation with Stakeholder Participation (CRESP) developed a risk methodology for Hanford Site that included ecological resources between 2014 and 2015. The ecological methodology included a comparison of the value of on-site resources with the eco-region, with state and federal threatened and endangered species, and with rare and unique habitats. Potential remediation options for particular evaluation units were used in conjunction with the resource level values to determine the risk of remediation of ecological resources. The methodology developed for Hanford Site also considered functional remediation (e.g. number of trucks, personnel, heavy equipment), initiating events (e.g. earthquakes, volcanos) and future land use. These factors were combined to rate the risk to ecological resources on a scale of not-discernible to very high. In this paper seven evaluation units (waste sites requiring remediation) were evaluated to explore the efficacy of the methodology to provide useful information on the comparative risk for decommissioning and waste management sites. The evaluation of resource levels was based on prior site information, state and federal data bases, and field investigations. The final determination of a risk rating for each evaluation unit depended upon both quantitative data, field experience, and professional judgement. It provides a method that can be applied to many remediation sites within a large DOE facility such as Hanford, as well as across the DOE complex. This will provide information for sound decision-making with stakeholder participation, and will allow DOE to reassure stakeholders that they are protecting human and ecological health on the Hanford Site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Spring 2014 Internship Diffuser Data Analysis

J-2X engine testing on the A-2 test stand at the NASA John C. Stennis Space Center (SSC) has recently concluded. As part of that test campaign, the engine was operated at lower power levels in support of expanding the use of J-2X to other missions. However, the A-2 diffuser was not designed for engine testing at the proposed low power levels. To evaluate the risk of damage to the diffuser, computer simulations were created of the rocket engine exhaust plume inside the 50ft long, water-cooled, altitude-simulating diffuser. The simulations predicted that low power level testing would cause the plume to oscillate in the lower sections of the diffuser. This can possibly cause excessive vibrations, stress, and heat transfer from the plume to the diffuser walls. To understand and assess the performance of the diffuser during low power level engine testing, nine accelerometers and four strain gages were installed around the outer surface of the diffuser. The added instrumentation also allowed for the verification of the rocket exhaust plume computational model. Prior to engine hot-fire testing, a diffuser water-flow test was conducted to verify the proper operation of the newly installed instrumentation. Subsequently, two J-2X engine hot-fire tests were completed. Hot-Fire Test 1 was 11.5 seconds in duration, and accelerometer and strain data verified that the rocket engine plume oscillated in the lower sections of the diffuser. The accelerometers showed very different results dependent upon location. The diffuser consists of four sections, with Section 1 being closest to the engine nozzle and Section 4 being farthest from the engine nozzle. Section 1 accelerometers showed increased amplitudes at startup and shutdown, but low amplitudes while the diffuser was started. Section 3 accelerometers showed the opposite results with near zero G amplitudes prior to and after diffuser start and peak amplitudes to +/- 100G while the diffuser was started. Hot-Fire Test 1 strain gages showed different data dependent on section. Section 1 strains were small, and were in the range of 50 to 150 microstrain, which would result in stresses from 1.45 to 4.35 ksi. The yield stress of the material, A-285 Grade C Steel, is 29.7 ksi. Section 4 strain gages showed much higher values with strains peaking at 1600 microstrain. This strain corresponds to a stress of 46.41 ksi, which is in excess of the yield stress, but below the ultimate stress of 55 to 75 ksi. The decreased accelerations and strain in Section 1, and the increased accelerations and strain in Sections 3 and 4 verified the computer simulation prediction of increased plume oscillations in the lower sections of the diffuser. Hot-Fire Test 2 ran for a duration of 125 seconds. The engine operated at a slightly higher power level than Hot-Fire Test 1 for the initial 35 seconds of the test. After 35 seconds the power level was lowered to Hot-Fire Test 1 levels. The acceleration and strain data for Hot-Fire Test 2 was similar during the initial part of the test. However, just prior to the engine being lowered to the Hot-Fire Test 1 power level, the strain gage data in Section 4 showed a large decrease to strains near zero microstrain from their peak at 1500 microstrain. Future work includes further strain and acceleration data analysis and evaluation.

Laigaie, Robert T.↗

Molecular understanding of new-particle formation from α-pinene between -50 and +25 °C

Abstract. Highly oxygenated organic molecules (HOMs) contribute substantially to the formation and growth of atmospheric aerosol particles, which affect air quality, human health and Earth's climate. HOMs are formed by rapid, gas-phase autoxidation of volatile organic compounds (VOCs) such as α-pinene, the most abundant monoterpene in the atmosphere. Due to their abundance and low volatility, HOMs can play an important role in new-particle formation (NPF) and the early growth of atmospheric aerosols, even without any further assistance of other low-volatility compounds such as sulfuric acid. Both the autoxidation reaction forming HOMs and their NPF rates are expected to be strongly dependent on temperature. However, experimental data on both effects are limited. Dedicated experiments were performed at the CLOUD (Cosmics Leaving OUtdoor Droplets) chamber at CERN to address this question. In this study, we show that a decrease in temperature (from +25 to -50°C) results in a reduced HOM yield and reduced oxidation state of the products, whereas the NPF rates (J1.7 nm) increase substantially. Measurements with two different chemical ionization mass spectrometers (using nitrate and protonated water as reagent ion, respectively) provide the molecular composition of the gaseous oxidation products, and a two-dimensional volatility basis set (2D VBS) model provides their volatility distribution. The HOM yield decreases with temperature from 6.2 % at 25°C to 0.7 % at -50°C. However, there is a strong reduction of the saturation vapor pressure of each oxidation state as the temperature is reduced. Overall, the reduction in volatility with temperature leads to an increase in the nucleation rates by up to 3 orders of magnitude at -50°C compared with 25°C. In addition, the enhancement of the nucleation rates by ions decreases with decreasing temperature, since the neutral molecular clusters have increased stability against evaporation. The resulting data quantify how the interplay between the temperature-dependent oxidation pathways and the associated vapor pressures affect biogenic NPF at the molecular level. Our measurements, therefore, improve our understanding of pure biogenic NPF for a wide range of tropospheric temperatures and precursor concentrations.

54 ENVIRONMENTAL SCIENCES↗

Review of research on wave mean flow interactions using FGGE data

Comparison is made between the conventional Eulerian diagnostics of wave mean flow interactions in the atmosphere and the diagnostics introduced by Andrews and McIntyre (1976). In the latter, the meridional circulation is represented by a residual circulation, and the eddy torque in the zonal momentum equation by the Eliassen-Palm (1960) flux divergence (or equivalently, by the poleward eddy flux of geostrophic potential vorticity). It is found that, while the new diagnostics are useful in studying stratospheric warmings and transports of conservative quantities, the conventional diagnostics are more useful in studying global energetics and wave mean flow interactions in the troposphere and lower stratosphere. Case studies diagnosed with FGGE IIIb data are presented to illustrate this point. Kung and Tanaka's (1983) comparisons of the atmospheric energy cycle for SOP-1 and SOP-2, estimated with the use of the ECMWF and GFDL FGGE IIIb data bases, are used to assess the uncertainty in calculations of energetics based on the use of FGGE IIIb data. These results demonstrate the high degree of model dependence in the FGGE IIb data sets.

Pfeffer, R. L.↗

Improvements for Image Compression Using Adaptive Principal Component Extraction (APEX)

The issues of image compression and pattern classification have been a primary focus of researchers among a variety of fields including signal and image processing, pattern recognition, data classification, etc. These issues depend on finding an efficient representation of the source data. In this paper we collate our earlier results where we introduced the application of the. Hilbe.rt scan to a principal component algorithm (PCA) with Adaptive Principal Component Extraction (APEX) neural network model. We apply these technique to medical imaging, particularly image representation and compression. We apply the Hilbert scan to the APEX algorithm to improve results

Ziyad, Nigel A.↗

Apparatus Characterizes Transient Voltages in Real Time

The figure shows a prototype of a relatively inexpensive electronic monitoring apparatus that measures and records selected parameters of lightning-induced transient voltages on communication and power cables. The selected parameters, listed below, are those most relevant to the ability of lightning-induced transients to damage electronic equipment. This apparatus bridges a gap between some traditional transient-voltage recorders that record complete waveforms and other traditional transient-voltage recorders that record only peak values: By recording the most relevant parameters and only those parameters this apparatus yields more useful information than does a traditional peak-value (only) recorder while imposing much smaller data-storage and data-transmission burdens than does a traditional complete-waveform recorder. Also, relative to a complete-waveform recorder, this apparatus is more reliable and can be built at lower cost because it contains fewer electronic components. The transients generated by sources other than lightning tend to have frequency components well below 1 MHz. Most commercial transient recorders can detect and record such transients, but cannot respond rapidly enough for recording lightning-induced transient voltage peaks, which can rise from 10 to 90 percent of maximum amplitude in a fraction of a microsecond. Moreover, commercial transient recorders cannot rearm themselves rapidly enough to respond to the multiple transients that occur within milliseconds of each other on some lightning strikes. One transient recorder, designed for Kennedy Space Center earlier [ Fast Transient-Voltage Recorder (KSC- 11991), NASA Tech Briefs, Vol. 23, No. 10, page 6a (October 1999)], is capable of sampling transient voltages at peak values up to 50 V in four channels at a rate of 20 MHz. That recorder contains a trigger circuit that continuously compares the amplitudes of the signals on four channels to a preset triggering threshold. When a trigger signal is received, a volatile memory is filled with data for a total time of 200 ms. After the data are transferred to nonvolatile memory, the recorder rearms itself within 400 ms to enable recording of subsequent transients. Unfortunately, the recorded data must be retrieved through a serial communication link. Depending on the amount of data recorded, the memory can be filled before retrieval is completed. Although large amounts of data are recorded and retrieved, only a small part of the information (the selected parameters) is usually required. The present transient-voltage recorder provides the required information, without incurring the overhead associated with the recording, storage, and retrieval of complete transient-waveform data. In operation, this apparatus processes transient voltage waveforms in real time to extract and record the selected parameters. An analog-to-digital converter that operates at a speed of as much as 100 mega-samples per second is used to sample a transient waveform. A real-time comparator and peak detector are implemented by use of fast field-programmable gate arrays.

Medelius, Pedro↗

Observation of Low-Energy Proton Direct Ionization in a 72-Layer 3D NAND Flash Memory

Single-event upsets are observed in a 72-layer 3D NAND flash memory operated in single-level cell mode after low-energy proton (500 keV-1.2 MeV) and heavy ion irradiation. The layer-by-layer error count is analyzed to visualize the stopping of low energy protons within the memory stack, and Monte Carlo simulations are correlated with the experimental data. Direct ionization by low-energy protons is identified by three-dimensional data analysis and the energy dependence of device sensitive cross-section. Heavy ion data is also presented for comparison.

Direct ionization↗

Machine-Learning Assisted Identification of Battery Life Models

Predictive battery life models are commonly utilized to extrapolate degradation trends observed during accelerated aging tests for simulation of degradation in real-world applications. Thus, fitting accelerated aging data as accurately as possible and with low uncertainty is crucial for making believable projections of battery lifetime, but it is challenging to identify algebraic expressions that accurately fit multivariate degradation trends. A review of models published in literature reveal some common expressions for fitting calendar aging data, which is only dependent on temperature and state-of-charge, but no consistency across many models for fitting cycle aging data, indicating the need for a statistically rigorous data driven approach for developing empirical models. This talk will describe a machine-learning assisted method for identification of predictive battery life models utilizing bilevel optimization and symbolic regression. Bilevel optimization with cross-validation is used to statistically determine cell- and stress-dependent model parameters, while symbolic regression identifies both linear and multiplicative candidate expressions to predict stress-dependent degradation rates by selecting low-order subsets of features from a generated feature library. Because model expressions are identified empirically, it is crucial to ensure resulting models behave according to physical expectations, so the stability of models for interpolation or extrapolation is interrogated qualitatively through simulation and quantitatively through cross-validation and uncertainty quantification via bootstrap resampling. This model identification approach substantially improves upon models identified purely using expert judgement in terms of both accuracy and uncertainty. Model simulation and validation is then conducted by deriving a state-equation form of the predictive model, enabling simulation of battery aging under dynamic stresses. This enables validation of the predictive battery model on lab-based tests with varying conditions or on drive-cycle or application-cycle testing protocols. Parameter uncertainty can be carried forward into model simulation, giving lifetime estimates and confidence windows for cell- or system-level lifetime. The financial impact of battery model uncertainty can be estimated by incorporating uncertainty into a technoeconomic model.

battery↗