Search NASA⌕ Search

SEARCH · Search NASA

Results for “difference frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Excellent performances of energy harvester using cantilever driving double-clamped 0.7Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-0.3PbTiO{sub 3} plates and symmetric middle-stops

We present a high performance nonlinear piezoelectric energy harvester constituted by a cantilever with symmetrically middle-stops and double-clamped piezoelectric plates based on piezoelectric single crystal 0.7Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-0.3PbTiO{sub 3}. Electrical properties of the device under different excitation frequencies, accelerations, and load resistances are studied systematically. Under a low acceleration of 3 m/s{sup 2} (0.3 g), a peak voltage of 26.2 V and a maximum normalized power of 25.6 mW/g{sup 2} were obtained across a matching impedance of 600 kΩ with favorable bandwidths. The low excitation acceleration and excellent performances indicate that the device can be a promising candidate for energy harvesting in low-power electronics and wireless sensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design and investigation of planar technology based ultra-wideband antenna with directional radiation patterns

A novel design technique based on planar technology for ultra-wideband (UWB) antennas with different ground shape having directional radiation pattern is being presented here. Firstly, the L-shape corner reflector ground plane antenna is designed with microstrip feed line in order to achieve large bandwidth and directivity. Thereafter, for the further improvement in the directivity as well as for better impedance matching the parabolic-shape ground plane has been introduced. The coaxial feed line is given for the proposed directional antenna in order to achieve better impedance matching with 50 ohm transmission line. The simulation analysis of the antenna is done on CST Microwave Studio software using FR-4 substrate having thickness of 1.6 mm and dielectric constant of 4.4. The simulated result shows a good return loss (S11) with respect to -10 dB. The radiation pattern characteristic, angular width, directivity and bandwidth performance of the antenna have also been compared at different resonant frequencies. The designed antennas exhibit low cost, low reflection coefficient and better directivity in the UWB frequency band.

42 ENGINEERING↗

A high-stability non-contact dilatometer for low-amplitude temperature-modulated measurements

Temperature modulated thermophysical measurements can deliver valuable insights into the phase transformation behavior of many different materials. While especially for non-metallic systems at low temperatures numerous powerful methods exist, no high-temperature device suitable for modulated measurements of bulk metallic alloy samples is available for routine use. In this work a dilatometer for temperature modulated isothermal and non-isothermal measurements in the temperature range from room temperature to 1300 K is presented. The length measuring system is based on a two-beam Michelson laser interferometer with an incremental resolution of 20 pm. The non-contact measurement principle allows for resolving sinusoidal length change signals with amplitudes in the sub-500 nm range and physically decouples the length measuring system from the temperature modulation and heating control. To demonstrate the low-amplitude capabilities, results for the thermal expansion of nickel for two different modulation frequencies are presented. These results prove that the novel method can be used to routinely resolve length-change signals of metallic samples with temperature amplitudes well below 1 K. This high resolution in combination with the non-contact measurement principle significantly extends the application range of modulated dilatometry towards high-stability phase transformation measurements on complex alloys.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Full-wave feasibility study of anti-radar diagnostic of magnetic field based on O-X mode conversion and oblique reflectometry imaging

An innovative millimeter wave diagnostic is proposed to measure the local magnetic field and edge current as a function of the minor radius in the tokamak pedestal region. The idea is to identify the direction of minimum reflectivity at the O-mode cutoff layer. Correspondingly, the transmissivity due to O-X mode conversion is maximum. That direction, and the angular map of reflectivity around it, contains information on the magnetic field vector B at the cutoff layer. Probing the plasma with different wave frequencies provides the radial profile of B. Full-wave finite-element simulations are presented here in 2D slab geometry. Modeling confirms the existence of a minimum in reflectivity that depends on the magnetic field at the cutoff, as expected from mode conversion physics, giving confidence in the feasibility of the diagnostic. The proposed reflectometric approach is expected to yield superior signal-to-noise ratio and to access wider ranges of density and magnetic field, compared with related radiometric techniques that require the plasma to emit electron Bernstein waves. Due to computational limitations, frequencies of 10-20 GHz were considered in this initial study. Frequencies above the edge electron-cyclotron frequency (f > 28 GHz here) would be preferable for the experiment, because the upper hybrid resonance and right cutoff would lie in the plasma, and would help separate the O-mode of interest from spurious X-waves.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Stimulated backscatter of laser light from BigFoot hohlraums on the National Ignition Facility

The high implosion velocity, high adiabat BigFoot design [Casey et al. , Phys. Plasmas 25 , 056308 (2018)] has produced the highest neutron yield to date in an ignition hohlraum on the National Ignition Facility. It has used up to 500 TW of peak power and nearly 2 MJ of laser energy in pulses up to 8 ns in duration, with the goal of fielding controlled implosions with high coupled energy, which can suppress deleterious hydrodynamic instabilities. However, when the laser pulse exceeds 6 ns with the laser energy greater than 1.6 MJ, stimulated Brillouin scattering (SBS) reaches levels that may damage optical components in the laser. Pending development of techniques to reduce SBS, limitation of laser power, and energy to avoid damage prevents the full exploitation of this approach to ignition. In this manuscript, we present three-dimensional simulations that match the experimentally measured SBS energy, in particular, reproducing quantitatively the time in the pulse when maximum backscatter occurs, and its magnitude across ~10 BigFoot experiments. The demonstrated robustness of the modeling, which combines LASNEX and pF3D simulations, motivates us to explore and recommend several feasible SBS mitigation strategies: modified laser pointing, different laser frequencies for each cone of beams, increased laser bandwidth on all or some of the cones, and materials with a mixture of light and heavy atoms lining the inside of the hohlraum walls.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal transport across nanoscale damage profile in sapphire irradiated by swift heavy ions

In this work, we studied the degradation of thermal conductivity in single crystal sapphire (α-Al 2 O 3 ) irradiated by 167 MeV Xe swift heavy ions (SHIs) over the multiple fluences in the range of 10 12 –10 14 ions/cm 2 . Thermal conductivity was measured primarily in the cross-plane direction using a noncontact ultrafast optical pump-probe technique called picosecond time domain thermoreflectance (TDTR). Multiple samples with variable ion fluences allowed us to probe distinct regions resulting from different regimes of microstructure evolution caused by electronic energy loss. By tuning the penetration depth of the thermal waves using different modulation frequencies, two regions with distinct conductivities were identified and the values of which were found to be consistent with phonon-mediated thermal transport models while the microstructure was confirmed by electron microscopy characterization. These damaged regions were determined to be a several micrometer thick ion track region and several tens of nanometer-thick amorphous layer present only above 5.0 × 10 13 ions/cm 2 . These results demonstrate the applicability of TDTR to resolve thermal transport behavior in SHI irradiated oxides having nonhomogeneous damage profile on a nanometer scale. The presented approach facilitates future studies aiming at resolving the impact of distinct damage resulting from electronic and nuclear stopping regimes under irradiation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Two-temperature effects in Hall-MHD simulations of the HIT-SI experiment

A two-temperature Hall-magnetohydrodynamic (Hall-MHD) model, which evolves the electron and ion temperatures separately, is implemented in the PSI-Tet 3D MHD code and used to model plasma dynamics in the Helicity Injected Torus–Steady Inductive (HIT-SI) experiment. The two-temperature model is utilized for HIT-SI simulations in both the PSI-Tet and NIMROD codes at a number of different injector frequencies in the 14.5–68.5 kHz range. At all frequencies, the NIMROD two-temperature model results in increased toroidal current, lower chord-averaged density, higher average temperatures, outward radial shift of the current centroid, and axial symmetrization of the current centroid, relative to the single-temperature NIMROD simulations. The two-temperature PSI-Tet model illustrates similar trends, but at high frequency operation, it exhibits lower electron temperature, smaller toroidal current, and decreased axial symmetrization with respect to the single-temperature PSI-Tet model. With all models, average temperatures and toroidal currents increase with the injector frequency. Power balance and heat fluxes to the wall are calculated for the two-temperature PSI-Tet model and illustrate considerable viscous and compressive heating, particularly at high injector frequency. Parameter scans are also presented for artificial diffusivity, wall temperature, and density. Both artificial diffusivity and the density boundary condition significantly modify the plasma density profiles, leading to larger average temperatures, toroidal current, and relative density fluctuations at low densities. As a result, a low density simulation achieves sufficiently high current gain (G > 5) to generate significant volumes of closed flux lasting 1–2 injector periods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Emittance preservation for the electron arm in a single PWFA-LC stage using quasi-adiabatic plasma density ramp matching sections

Plasma-based acceleration (PBA) is being considered for a next generation linear collider (LC). In some PBA-LC designs for the electron arm, the extreme beam parameters are expected to trigger background ion motion within the witness beam, which can lead to longitudinally varying nonlinear focusing forces and result in an unacceptable emittance growth of the beam. To mitigate this, we propose to use quasi-adiabatic plasma density ramps as matching sections at the entrance and exit of each stage. We match the witness electron beam to the low density plasma entrance, where the beam initially has a large matched spot size so the ion motion effects are relatively small. As the beam propagates in the plasma density upramp, it is quasi-adiabatically focused, and its distribution maintains a non-Gaussian equilibrium distribution in each longitudinal slice throughout the process, even when severe ion collapse has occurred. This only causes small amounts of slice emittance growth. The phase mixing between slices with different betatron frequencies leads to additional projected emittance growth within the acceleration stage. A density downramp at the exit of an acceleration section can eliminate much of the slice and projected emittance growth as the beam and ion motion adiabatically defocuses and decreases, respectively. Simulation results from QuickPIC with Azimuthal Decomposition show that within a single acceleration stage with a 25 GeV energy gain, this concept can limit the projected emittance growth to only ∼2% for a 25 GeV, 100 nm emittance witness beam and ∼20% for a 100 GeV, 100 nm normalized emittance witness beam. The trade-off between the adiabaticity of the plasma density ramp and the initial ion motion at the entrance for a given length of the plasma density ramp is also discussed.

Physics↗

Selective incorporation of antimony into gallium nitride

Dilute concentrations of antimony (Sb) incorporation into GaN induce strong bandgap bowing and tunable room-temperature photoluminescence from the UV to the green spectral regions. However, the atomistic details of the incorporation of Sb into the GaN host remain unclear. In this work, we use first-principles calculations to understand the thermodynamics of Sb substitution into GaN and its effect on the optical and Raman spectra. Although it is empirically considered that Sb is preferentially incorporated as an anion (Sb3−) into the N sublattice, we demonstrate that Sb can also be incorporated as a cation (Sb3+, Sb5+) into the metal sublattice. Our thermodynamic analysis demonstrates that SbN0, SbGa2+, and SbGa0 can co-exist under Ga-rich conditions in n-type samples. We further confirm the dual incorporation of Sb by calculating the vibrational frequencies of different anionic and cationic substitutions to explain the origins of experimentally observed additional Raman peaks of Sb-doped GaN. Moreover, the calculated band structures of different Sb substitutions into GaN explain the experimental photoluminescence and optical absorption spectra. Overall, our analysis suggests that the coexistence of Sb3−, Sb3+, and Sb5+ substitutions into GaN explains the totality of experimental measurements. Our results demonstrate that the selective incorporation of Sb into GaN (and potentially other group-V elements such as As, P, or Bi) by tuning the growth conditions can drastically modify the electronic properties, for applications in visible light emitters and photocatalysis.

Physics↗

TESTING PULSAR RADIATION MODELS USING AN alpha-WEAK-DEPENDENT ALTITUDE RATIO

It is found that pulsar radiation altitude ratios between different radio frequencies are weak-dependent on the inclination angle alpha. This is proved via series expansion techniques and illustrated by using pulsar examples of PSR B0329+54, B1508+55, B2016+28, B1133+16, and B2319+60. It is emphasized that this alpha-weak-dependent radiation altitude ratio offers a good tool to test pulsar radiation models. We use the measured altitude ratios to constrain the parameter space for the Ruderman-Sutherland model and the inverse Compton scattering model. It is found that the Ruderman-Sutherland model is not compatible with the measured altitude ratios, while the results are compatible with the inverse Compton scattering model. The potential possible applications of this method in studying pulsar timing and in studying pulsar high energy radiation are also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Constraining the Baryon fraction in the warm hot intergalactic medium at low Redshifts with Planck data

We cross-correlate foreground cleaned Planck Nominal cosmic microwave background (CMB) maps with two templates constructed from the Two-Micron All-Sky Redshift Survey of galaxies. The first template traces the large-scale filamentary distribution characteristic of the Warm–Hot Intergalactic Medium (WHIM) out to ∼90 h{sup −1} Mpc. The second preferentially traces the virialized gas in unresolved halos around galaxies. We find a marginal signal from the correlation of Planck data and the WHIM template with a signal to noise from 0.84 to 1.39 at the different Planck frequencies, and with a frequency dependence compatible with the thermal Sunyaev–Zel’dovich effect. When we restrict our analysis to the 60% of the sky outside the plane of the Galaxy and known point sources and galaxy clusters, the cross-correlation at zero lag is 0.064±0.051 μK. The correlation extends out to ≈6{sup ∘}, which at the median depth of our template corresponds to a physical length of ∼6−−8 h{sup −1} Mpc. On the same fraction of the sky, the cross-correlation of the CMB data with the second template is <0.17 μK (95% C.L.), providing no statistically significant evidence of a contribution from bound gas to the previous result. This limit translates into a physical constraint on the properties of the shock-heated WHIM of a log-normal model describing the weakly nonlinear density field. We find that our upper limit is compatible with a fraction of 45% of all baryons residing in filaments at overdensities ∼1–100 and with temperatures in the range 10{sup 4.5}−−10{sup 7.5} K, in agreement with the detection at redshift z∼0.5 of Van Waerbeke et al..

79 ASTRONOMY AND ASTROPHYSICS↗

Linear gyrokinetic simulations of reversed shear Alfvén eigenmodes and ion temperature gradient modes in DIII-D tokamak

Abstract Global linear gyrokinetic simulations using realistic DIII-D tokamak geometry and plasma profiles find co-existence of unstable reversed shear Alfvén eigenmodes (RSAE) with low toroidal mode number n and electromagnetic ion temperature gradient (ITG) instabilities with higher toroidal mode number n . For intermediate n = [10, 12], RSAE and ITG co-exist and overlap weakly in the radial domain with similar growth rates but different real frequencies. Both RSAE and ITG growth rates decrease less than 5% when compressible magnetic perturbations are neglected in the simulations. The ITG growth rates increase less than 7% when fast ions are not included in the simulations. Finally, the effects of trapped electrons on the RSAE are negligible.

Physics↗

Efficient discontinuous finite difference meshes for 3-D Laplace–Fourier domain seismic wavefield modelling in acoustic media with embedded boundaries

Simulation of acoustic wave propagation in the Laplace–Fourier (LF) domain, with a spatially uniform mesh, can be computationally demanding especially in areas with large velocity contrasts. To improve efficiency and convergence, we use 3-D second- and fourth-order velocity-pressure finite difference (FD) discontinuous meshes (DM). Our DM algorithm can use any spatial discretization ratio between meshes. We evaluate direct and iterative parallel solvers for computational speed, memory requirements and convergence. Finally, benchmarks in realistic 3-D models and topographies show more efficient and stable results for DM with direct solvers than uniform mesh results with iterative solvers.

58 GEOSCIENCES↗

Qubit transfer between photons at telecom and visible wavelengths in a slow-light atomic medium

We propose a method that enables efficient conversion of the quantum information frequency between different regions of a spectrum of light based on recently demonstrated strong parametric coupling between two narrow-band single-photon pulses propagating in a slow-light atomic medium [N. Sisakyan and Yu. Malakyan, Phys. Rev. A, 75, 063831 (2007)]. We show that an input qubit at telecom wavelength is transformed into another at a visible domain in a lossless and shape-conserving manner while keeping the initial quantum coherence and entanglement. These transformations can be realized with a quantum efficiency close to its maximum value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dipole oscillations in fermionic mixtures

We study dipole oscillations in a general fermionic mixture. Starting from the Boltzmann equation, we classify the different solutions in the parameter space through the number of real eigenvalues of the small oscillations matrix. We discuss how this number can be computed using the Sturm algorithm and its relation with the properties of the Laplace transform of the experimental quantities. After considering two components in harmonic potentials having different trapping frequencies, we study dipole oscillations in three-component mixtures. Explicit computations are done for realistic experimental setups using the classical Boltzmann equation without intraspecies interactions. A brief discussion of the application of this classification to general collective oscillations is also presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear envelope equation for broadband optical pulses in quadratic media

We derive a nonlinear envelope equation to describe the propagation of broadband optical pulses in second-order nonlinear materials. The equation is first order in the propagation coordinate and is valid for arbitrarily wide pulse bandwidth. Our approach goes beyond the usual coupled wave description of {chi}{sup (2)} phenomena and provides an accurate modeling of the evolution of ultra-broadband pulses also when the separation into different coupled frequency components is not possible or not profitable.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards Einstein-Podolsky-Rosen quantum channel multiplexing

A single broadband squeezed field constitutes a quantum communication resource that is sufficient for the realization of a large number N of quantum channels based on distributed Einstein-Podolsky-Rosen entangled states. Each channel can serve as a resource for, for example, independent quantum key distribution or teleportation protocols. N-fold channel multiplexing can be realized by accessing 2N squeezed modes at different Fourier frequencies. We report on the experimental implementation of the N=1 case through the interference of two squeezed states, extracted from a single broadband squeezed field, and demonstrate all techniques required for multiplexing (N>1). Quantum channel frequency multiplexing can be used to optimize the exploitation of a broadband squeezed field in a quantum information task. For instance, it is useful if the bandwidth of the squeezed field is larger than the bandwidth of the homodyne detectors. This is currently a typical situation in many experiments with squeezed and two-mode squeezed entangled light.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of phase and coupling between the vibrational modes on selective excitation in coherent anti-Stokes Raman scattering microscopy

Coherent anti-Stokes Raman scattering (CARS) microscopy has been a major tool of investigation of biological structures as it contains the vibrational signature of molecules. A quantum control method based on chirped pulse adiabatic passage was recently proposed for selective excitation of a predetermined vibrational mode in CARS microscopy [Malinovskaya and Malinovsky, Opt. Lett. 32, 707 (2007)]. The method utilizes the chirp sign variation at the peak pulse amplitude and gives a robust adiabatic excitation of the desired vibrational mode. Using this method, we investigate the impact of coupling between vibrational modes in molecules on controllability of excitation of the CARS signal. We analyze two models of two coupled two-level systems (TLSs) having slightly different transitional frequencies. The first model, featuring degenerate ground states of the TLSs, gives robust adiabatic excitation and maximum coherence in the resonant TLS for positive value of the chirp. In the second model, implying nondegenerate ground states in the TLSs, a population distribution is observed in both TLSs, resulting in a lack of selectivity of excitation and low coherence. It is shown that the relative phase and coupling between the TLSs play an important role in optimizing coherence in the desired vibrational mode and suppressing unwanted transitions in CARS microscopy.

74 ATOMIC AND MOLECULAR PHYSICS↗