Search NASA⌕ Search

SEARCH · Search NASA

Results for “graphitic structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Development of repair procedures for graphite/epoxy structures on commercial transports

A program is currently being performed for NASA-Langley on development of composite repair procedures adapted to the requirements of commercial airlines. The first phase of the program included a survey of airline damage experience and airline maintenance and repair capabilities for composite structures. A survey was also conducted for available data on composite damage tolerance. The second phase of the program evaluated various depot and field level repairs ranging from precured bonded graphite flush patches to mechanically attached aluminum patches. Based on airline survey results, the emphasis was on field repairs. The results verified the effectiveness of field type repairs for lightly loaded composite structure.

Stone, R. H.↗

K{sub 6} carbon: A metallic carbon allotrope in sp{sup 3} bonding networks

We identify by first-principles calculations a new cubic carbon phase in I4{sub 1}32 (O{sup 8}) symmetry, named K{sub 6} carbon, which has a six atom primitive cell comprising sp{sup 3} hybridized C{sub 3} triangle rings. The structural stability is verified by phonon mode analysis. The calculated elastic constants show that the K{sub 6} carbon is a high ductile material with a density even lower than graphite. Electronic band and density of states calculations reveal that it is a metallic carbon allotrope with a high electronic density of states of ∼0.10 states/eV per atom at the Fermi level. These results broaden our understanding of the structural and electronic properties of carbon allotropes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stress wave attenuation in thin structures by ultrasonic through-transmission

The steady state amplitude of the output of an ultrasonic through transmission measurement is analyzed and the result is given in closed form. Provided that the product of the input and output transduction ratios; the specimen-transducer reflection coefficient; the specimen-transducer phase shift parameter; and the material phase velocity are known, this analysis gives a means for determining the through-thickness attenuation of an individual thin sample. Multiple stress wave reflections are taken into account and so signal echoes do not represent a difficulty. An example is presented for a graphite fiber epoxy composite (Hercules AS/3501-6). A direct method for continuous or intermittent monitoring of through thickness attenuation of plate structures which may be subject to service structural degradation is provided.

Lee, S. S.↗

Mechanically and Chemically Robust Sandwich-Structured C@Si@C Nanotube Array Li-Ion Battery Anodes

Stability and high energy densities are essential qualities for emerging battery electrodes. Because of its high specific capacity, silicon has been considered a promising anode candidate. However, the several-fold volume changes during lithiation and delithiation leads to fractures and continuous formation of an unstable solid-electrolyte interphase (SEI) layer, resulting in rapid capacity decay. Here, we present a carbon–silicon–carbon (C@Si@C) nanotube sandwich structure that addresses the mechanical and chemical stability issues commonly associated with Si anodes. The C@Si@C nanotube array exhibits a capacity of ~2200 mAh g –1 (~750 mAh cm –3 ), which significantly exceeds that of a commercial graphite anode, and a nearly constant Coulombic efficiency of ~98% over 60 cycles. In addition, the C@Si@C nanotube array gives much better capacity and structure stability compared to the Si nanotubes without carbon coatings, the ZnO@C@Si@C nanorods, a Si thin film on Ni foam, and C@Si and Si@C nanotubes. In situ SEM during cycling shows that the tubes expand both inward and outward upon lithiation, as well as elongate, and then revert back to their initial size and shape after delithiation, suggesting stability during volume changes. The mechanical modeling indicates the overall plastic strain in a nanotube is much less than in a nanorod, which may significantly reduce low-cycle fatigue. Furthermore, the sandwich-structured nanotube design is quite general, and may serve as a guide for many emerging anode and cathode systems.

25 ENERGY STORAGE↗

Corrosion test of HTGR graphite with SIC coating - 18671

The application of SiC composite as a corrosion-resistive coating of graphite remains an important task for HTGR. Different methods and technologies have been developed for SiC-coatings of fuel and graphite frames to reduce their chemical corrosion/spraying and sorption capacity with respect to hydrogen. The use of such a coating would lead to some stabilization of the structure of carbon formations and their properties, which are changing in almost all HTGR operational regimes. This paper presents a study of the chemical interaction of the SiC gradient coating of the high-density IG-110 graphite with H{sub 2}O, O{sub 2}, CH{sub 4}, H{sub 2}, at pressures 1 and 100 Pa in a temperature range up to 1400 deg. C. The experiments at 100 Pa were conducted using mass spectrometry registration of time dependencies of partial pressure changes of the gas mixture, keeping the sample at a constant temperature (integral mode). Similar registrations at 1 Pa of moisture were made in differential mode (under continuous pump out) with 10 deg. C/min heating/cooling rate. The experimental results and microstructural study made it possible to get the parameters and peculiarities of the passive and the active corrosions of SiC and draw some conclusions about the level of the reduction of gas interaction with the bulk graphite due to SiC coating (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Diffusion Of Hydrophobin Proteins In Solution And Interactions With A Graphite Surface

Background Hydrophobins are small proteins produced by filamentous fungi that have a variety of biological functions including coating of spores and surface adhesion. To accomplish these functions, they rely on unique interface-binding properties. Using atomic-detail implicit solvent rigid-body Brownian dynamics simulations, we studied the diffusion of HFBI, a class II hydrophobin from Trichoderma reesei, in aqueous solution in the presence and absence of a graphite surface. Results In the simulations, HFBI exists in solution as a mixture of monomers in equilibrium with different types of oligomers. The oligomerization state depends on the conformation of HFBI. When a Highly Ordered Pyrolytic Graphite (HOPG) layer is present in the simulated system, HFBI tends to interact with the HOPG layer through a hydrophobic patch on the protein. Conclusions From the simulations of HFBI solutions, we identify a tetrameric encounter complex stabilized by non-polar interactions between the aliphatic residues in the hydrophobic patch on HFBI. After the formation of the encounter complex, a local structural rearrangement at the protein interfaces is required to obtain the tetrameric arrangement seen in HFBI crystals. Simulations performed with the graphite surface show that, due to a combination of a geometric hindrance and the interaction of the aliphatic sidechains with the graphite layer, HFBI proteins tend to accumulate close to the hydrophobic surface.

59 BASIC BIOLOGICAL SCIENCES↗

Silicon Based Anodes for Li-Ion Batteries

Silicon is environmentally benign and ubiquitous. Because of its high specific capacity, it is considered one of the most promising candidates to replace the conventional graphite negative electrode used in today's Li ion batteries. Silicon has a theoretical specific capacity of nearly 4200 mAh/g (Li21Si5), which is 10 times larger than the specific capacity of graphite (LiC6, 372 mAh/g). However, the high capacity of silicon is associated with huge volume changes (more than 300 percent) when alloyed with lithium, which can cause severe cracking and pulverization of the electrode and lead to significant capacity loss. Significant scientific research has been conducted to circumvent the deterioration of silicon based anode materials during cycling. Various strategies, such as reduction of particle size, generation of active/inactive composites, fabrication of silicon based thin films, use of alternative binders, and the synthesis of 1-D silicon nanostructures have been implemented by a number of research groups. Fundamental mechanistic research has also been performed to better understand the electrochemical lithiation and delithiation process during cycling in terms of crystal structure, phase transitions, morphological changes, and reaction kinetics. Although efforts to date have not attained a commercially viable Si anode, further development is expected to produce anodes with three to five times the capacity of graphite. In this chapter, an overview of research on silicon based anodes used for lithium-ion battery applications will be presented. The overview covers electrochemical alloying of the silicon with lithium, mechanisms responsible for capacity fade, and methodologies adapted to overcome capacity degradation observed during cycling. The recent development of silicon nanowires and nanoparticles with significantly improved electrochemical performance will also be discussed relative to the mechanistic understanding. Finally, future directions on the development of silicon based anodes will be considered.

25 ENERGY STORAGE↗

Viscosity Analysis of Battery Electrode Slurry

We report the effects of component ratios and mixing time on electrode slurry viscosity. Three component quantities were varied: active material (graphite), conductive material (carbon black), and polymer binder (carboxymethyl cellulose, CMC). The slurries demonstrated shear-thinning behavior, and suspension properties stabilized after a relatively short mixing duration. However, micrographs of the slurries suggested their internal structures did not stabilize after the same mixing time. Increasing the content of polymer binder CMC caused the greatest viscosity increase compared to that of carbon black and graphite.

25 ENERGY STORAGE↗

Durability and damage tolerance of Large Composite Primary Aircraft Structure (LCPAS)

Analysis and testing addressing the key technology areas of durability and damage tolerance were completed for wing surface panels. The wing of a fuel-efficient, 200-passenger commercial transport airplane for 1990 delivery was sized using graphite-epoxy materials. Coupons of various layups used in the wing sizing were tested in tension, compression, and spectrum fatigue with typical fastener penetrations. The compression strength after barely visible impact damage was determined from coupon and structural element tests. One current material system and one toughened system were evaluated by coupon testing. The results of the coupon and element tests were used to design three distinctly different compression panels meeting the strength, stiffness, and damage-tolerance requirements of the upper wing panels. These three concepts were tested with various amounts of damage ranging from barely visible impact to through-penetration. The results of this program provide the key technology data required to assess the durability and damage-tolerance capability or advanced composites for use in commercial aircraft wing panel structure.

Mccarty, John E.↗

Rapid Sintering of Nano-Diamond Compacts

Diamond compacts were sintered from nano-size diamond crystals at high pressure, 8 GPa, and temperature above 1500 degrees C for very short times ranging from 5 to 11 s. Structure and mechanical properties of the compacts have been characterized. Although we have not completely avoided graphitization of diamonds, the amount of graphite produced was low, less than 2%, and despite relatively high porosity, the compacts were characterized by high hardness, bulk and Young moduli.

36 MATERIALS SCIENCE↗

Direct Visualization of Solid Electrolyte Interphase Formation in Lithium-Ion Batteries with In Situ Electrochemical Transmission Electron Microscopy

Complex, electrochemically driven transport processes form the basis of electrochemical energy storage devices. The direct imaging of electrochemical processes at high spatial resolution and within their native liquid electrolyte would significantly enhance our understanding of device functionality, but has remained elusive. In this work we use a recently developed liquid cell for in situ electrochemical transmission electron microscopy to obtain insight into the electrolyte decomposition mechanisms and kinetics in lithium-ion (Li-ion) batteries by characterizing the dynamics of solid electrolyte interphase (SEI) formation and evolution. Here we are able to visualize the detailed structure of the SEI that forms locally at the electrode/electrolyte interface during lithium intercalation into natural graphite from an organic Li-ion battery electrolyte. We quantify the SEI growth kinetics and observe the dynamic self-healing nature of the SEI with changes in cell potential.

25 ENERGY STORAGE↗

Quaternary FeCoNiMn-Based Nanocarbon Electrocatalysts for Bifunctional Oxygen Reduction and Evolution: Promotional Role of Mn Doping in Stabilizing Carbon

The intrinsic instability of carbon largely limits its use for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) as a bifunctional catalyst in reversible fuel cells or water electrolyzers. In this paper, we discovered that Mn doping has a promotional role in stabilizing nanocarbon catalysts for the ORR/OER in alkaline media. Stable nanocarbon composites are derived from an inexpensive carbon/nitrogen precursor (i.e., dicyandiamide) and quaternary FeCoNiMn alloy via a template-free carbonization process. In addition to FeCoNiMn metal alloys/oxides, the carbon composites comprise substantial carbon tube forests growing on a thick and dense graphitic substrate. The dense carbon substrate with high degree of graphitization results from Mn doping, while active nitrogen-doped carbon tubes stem from FeCoNi. Catalyst structures and performance are greatly dependent on the doping content of Mn. Various accelerated stress tests (AST) and life tests verify the encouraging ORR/OER stability of the nanocarbon composite catalyst with optimal Mn doping. Extensive characterization before and after ASTs elucidates the mechanism of stability enhancement resulting from Mn doping, which is attributed to (i) hybrid carbon nanostructures with enhanced resistance to oxidation and (ii) the in situ formation of the β-MnO 2 and FeCoNi-based oxides capable of preventing carbon corrosion and promoting activity. Note that the improvement in stability due to Mn doping is accompanied by a slight activity loss due to a decrease in surface area. Finally, this work provides a strategy to stabilize carbon catalysts by appropriately integrating transition metals and engineering carbon structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards the selective modification of soft-templated mesoporous carbon materials by elemental fluorine for energy storage devices

Graphite fluoride is classified into (CF) n and (C 2 F) n types based on its structure and composition. In the former (CF) n has been widely prepared and commercially utilized as electrodes in primary lithium ion batteries (LIBs). Porous electrodes, i.e. templated mesoporous carbons, can greatly improve first Coulombic efficiencies. Furthermore, by achieving the highest discharge potentials and rate capabilities, the extent of fluorination reactions and the retention of a conductive carbon backbone are required. Thus, the choice of the starting carbon nanomaterial and of the fluorination conditions is detrimental to the design of future energy storage and conversion devices, namely LIBs and pseudosupercapacitors.

25 ENERGY STORAGE↗

Application of X-ray microcomputed tomography in the characterization of irradiated nuclear fuel and material specimens

X-ray microcomputed tomography (µCT) was applied in characterizing the internal structures of a number of irradiated materials, including carbon-carbon fibre composites, nuclear-grade graphite and tristructural isotropic-coated fuel particles. Local cracks in carbon-carbon fibre composites associated with their synthesis process were observed with µCT without any destructive sample preparation. Pore analysis of graphite samples was performed quantitatively, and qualitative analysis of pore distribution was accomplished. It was also shown that high-resolution µCT can be used to probe internal layer defects of tristructural isotropic-coated fuel particles to elucidate the resulting high release of radioisotopes. Layer defects of sizes ranging from 1 to 5 µm and up could be isolated by to-mography. As an added advantage, µCT could also be used to identify regions with high densities of radioisotopes to deter-mine the proper plane and orientation of particle mounting for further analytical characterization, such as materialographic sectioning followed by optical and electron microscopy. Lastly, in fully ceramic matrix fuel forms, despite the highly absorbing matrix, characterization of tristructural isotropic-coated particles embedded in a silicon carbide matrix was accomplished usingµCT and related advanced image analysis techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Refinement of the composition and structure of YBaCo{sub 4-x}Al{sub x}O{sub 7+{delta}} crystals

YBa(Co{sub 4-x}Al{sub x})O{sub 7+{delta}} (114Y) crystals have been grown in the Y-Ba-Co-O system by spontaneous crystallization from a slowly cooled nonstoichiometric melt. To change the oxygen content, the crystals were isothermally annealed in air in the range of 280-490 Degree-Sign C. The crystals grown were characterized by scanning electron microscopy and powder X-ray diffraction. According to the data of an X-ray spectroscopic quantitative microprobe analysis, the average compositions of 'as-grown' and oxygen-saturated crystals were Y{sub 1.04}Ba{sub 1}Co{sub 3.54}Al{sub 0.50}O{sub 7.8} and Y{sub 1.02}Ba{sub 1}Co{sub 3.55}Al{sub 0.51}O{sub 8.4}, respectively. The refinement of the crystal structure after saturation on an automatic Bruker X8APEX diffractometer with a CCD detector (MoK{alpha} radiation, graphite monochromator, {theta}{sub max} = 32.54 Degree-Sign , sp. gr. P6{sub 3}mc, a = 6.2746(9), c = 10.257(3) Angstrom-Sign , V = 349.71(13) Angstrom-Sign {sup 3}, Z = 2, d{sub calcd} = 5.220 g/cm{sup 3}) reveals the location of Al in two independent positions of Co atoms and yields the general formula of the compound as YBaCo{sub 3.26}Al{sub 0.74}O{sub 7}. Problems related to the difference in the compositions obtained by different methods are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Research on fiber-reinforced composites

Research in materials science - high temperature structural materials, wetting and adherence of nickel alloys to sapphire, boron carbide filaments, and ceramic and graphite fibers

MATERIALS SCIENCE↗

Results of graphite-polyimide isogrid panel testing

A procedure was developed for fabricating short-fiber HTS graphite and NR150B2 polyimide resin into an isogrid configuration. After fabrication, the panels were subjected to structural analysis and testing. The testing program is described.

Hyer, M. W.↗

A thermoplastic polyimidesulfone

A polymer system has been prepared which has the excellent thermoplastic properties generally associated with polysulfones, and the solvent resistance and thermal stability of aromatic polyimides. This material, with improved processability over the base polyimide, can be processed in the 260-325 C range in such a manner as to yield high quality, tough unfilled moldings; strong, high-temperature-resistant adhesive bonds; and well consolidated, graphite-fiber-reinforced moldings (composities). The unfilled moldings have physical properties that are similar to aromatic polysulfones which demonstrates the potential as an engineering thermoplastic. The adhesive bonds exhibit excellent retention of initial strength levels even after thermal aging for 5000 hours at 232 C. The graphite-fiber-reinforced moldings have mechanical properties which makes this polymer attractive for the fabrication of structural composites.

St.clair, T. L.↗