Search NASA⌕ Search

SEARCH · Search NASA

Results for “interactive systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

One-Dimensional Fluids with Second Nearest–Neighbor Interactions

As is well known, one-dimensional systems with interactions restricted to first nearest neighbors admit a full analytically exact statistical-mechanical solution. This is essentially due to the fact that the knowledge of the first nearest–neighbor probability distribution function, p{sub 1}(r), is enough to determine the structural and thermodynamic properties of the system. On the other hand, if the interaction between second nearest–neighbor particles is turned on, the analytically exact solution is lost. Not only the knowledge of p{sub 1}(r) is not sufficient anymore, but even its determination becomes a complex many-body problem. In this work we systematically explore different approximate solutions for one-dimensional second nearest–neighbor fluid models. We apply those approximations to the square-well and the attractive two-step pair potentials and compare them with Monte Carlo simulations, finding an excellent agreement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Complex reactions on a convertible catalyst surface: A study of the S-O-Cu system

The interaction of clean and partially oxidized Cu(110) with sulphur was studied by scanning tunneling microscopy and density functional theory calculations in the low-coverage range. On the clean Cu surface individual S atoms adsorb in the troughs between the Cu atom rows. Hollow sites are preferred, but long-bridge sites are occasionally occupied as well. The majority of adsorbed S, however, seems to be involved in the formation of highly mobile Cu x S y clusters of various sizes. The clusters preferentially attach to steps thus changing the step morphology completely. Some of the clusters form aggregates on the terraces. On the partially oxidized surface similar clusters form and cause long-range mass transport to steps. Additionally, nanowires form in [001] direction on and along the surface oxide stress domains. These nanowires have a complex composition, exhibit different corrugations and appear sometimes as three-dimensional needles. Occasionally they flip their direction by 90°, but doing so they partially decompose. Finally, annealing of the S-O-Cu surface leads to consumption of the surface oxide stripes indicating loss of oxygen presumably via SO 2 formation. Simultaneously, linear sulphur chains suspended between the [001] –O-Cu-O- chains form in [11¯0] direction. The surprising multitude of processes and products even at low-pressure, low-temperature conditions in the comparatively simple S-O-Cu system highlights the difficulty of controlling reactivity and selectivity on such convertible catalyst surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the development of an interactive resource information management system for analysis and display of spatiotemporal data

The recent availability of timely synoptic earth imagery from the Earth Resources Technology Satellites (ERTS) provides a wealth of information for the monitoring and management of vital natural resources. Formal language definitions and syntax interpretation algorithms were adapted to provide a flexible, computer information system for the maintenance of resource interpretation of imagery. These techniques are incorporated, together with image analysis functions, into an Interactive Resource Information Management and Analysis System, IRIMAS, which is implemented on a Texas Instruments 980A minicomputer system augmented with a dynamic color display for image presentation. A demonstration of system usage and recommendations for further system development are also included.

Schell, J. A.↗

An Interactive Concatenated Turbo Coding System

This paper presents a concatenated turbo coding system in which a Reed-Solomon outer code is concatenated with a binary turbo inner code. In the proposed system, the outer code decoder and the inner turbo code decoder interact to achieve both good bit error and frame error performances. The outer code decoder helps the inner turbo code decoder to terminate its decoding iteration while the inner turbo code decoder provides soft-output information to the outer code decoder to carry out a reliability-based soft- decision decoding. In the case that the outer code decoding fails, the outer code decoder instructs the inner code decoder to continue its decoding iterations until the outer code decoding is successful or a preset maximum number of decoding iterations is reached. This interaction between outer and inner code decoders reduces decoding delay. Also presented in the paper are an effective criterion for stopping the iteration process of the inner code decoder and a new reliability-based decoding algorithm for nonbinary codes.

Liu, Ye↗

Machine learning pipeline to predict defect behavior in metallic alloy systems

The interaction between defect and solute atoms is critical to the thermodynamic and kinetic behavior of metallic alloys under exposure to high-energy radiation, causing irradiation damage in materials. Radiation can generate non-equilibrium concentrations of point defects such as vacancies and interstitials. The excess point defects not only accelerate diffusional processes such as precipitation that cause radiation embrittlement, but also change the pathway of phase transformations, including nucleation processes. Understanding these defect behaviors is complicated by the challenge and complexity of addressing each possible local and discrete distribution of environments and chemical interactions around targeted defects-solute or solute-solute complexes. To resolve the challenge, machine learning regression techniques have emerged as powerful tools that can train and construct an energy model to accurately describe the chemical interactions of solutes and defects. In Fiscal Year 2022, the work focused on the workflow development and demonstration using machine learning regression, density functional theory, cluster expansion, and Monte Carlo simulation to predict the effects of ternary solute elements (e.g., aluminum and molybdenum) and point defects on the Cr-rich $\alpha^{\prime}$ precipitation in multicomponent FeCr model alloys. The computational outcomes include the prediction of the ternary phase diagram, vacancy formation energy for different compositions, and the effect of vacancies on the nucleation of Cr-rich clusters. The simulations predict a pronounced change of Cr solubility in bcc Fe by the addition of Al and the rejection of Al atoms from $\alpha^{\prime}$ precipitates. Additionally, the simulations show the formation of Cr-vacancy clusters as the initial nuclei for stable nucleation and growth of $\alpha^{\prime}$ particles. The results demonstrate important outcomes and applications of using machine learning pipeline to study model or commercial alloys with multicomponent solute species and point defects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

pH profile of the adsorption of nucleotides onto montmorillonite. II - Adsorption and desorption of 5-prime-AMP in iron-calcium montmorillonite systems

The interaction of 5-prime-AMP with montmorillonite saturated with various ratios of two metals found ubiquitously on the surface of earth, that is, iron and calcium, is investigated. Adsorption and desorption of the nucleotide were studied in the pH range of 2-12 at three levels of addition: 0.080, 0.268 and 0.803 mmole 5-prime-AMP per gram of clay. Two desorption stages were employed - H2O wash and NaOH extraction (pH = 12.0). 5-prime-AMP was preferentially adsorbed on the Fe-containing clays relative to the Ca clay. The nucleotide was fully recovered by the two desorption stages, mostly by the NaOH extraction. The evidence at hand indicates that 5-prime-AMP reaction with clay is affected by electrostatic interactions involving both attraction and repulsion forces. Some specific adsorption, possibly the result of covalent bonding and complex formation with the adsorbed ion, cannot be ruled out for iron but does not appear to operate for calcium. Changes in pH cause varying degrees of attaction and repulsion of 5-prime-AMP and may have been operating on the primitive earth, leading to sequences of adsorption and release of this biomolecule.

Banin, A.↗

Stochastic sensing through covalent interactions

A system and method for stochastic sensing in which the analyte covalently bonds to the sensor element or an adaptor element. If such bonding is irreversible, the bond may be broken by a chemical reagent. The sensor element may be a protein, such as the engineered P.sub.SH type or .alpha.HL protein pore. The analyte may be any reactive analyte, including chemical weapons, environmental toxins and pharmaceuticals. The analyte covalently bonds to the sensor element to produce a detectable signal. Possible signals include change in electrical current, change in force, and change in fluorescence. Detection of the signal allows identification of the analyte and determination of its concentration in a sample solution. Multiple analytes present in the same solution may be detected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

INTERACTIONS BETWEEN MODERATE- AND LONG-PERIOD GIANT PLANETS: SCATTERING EXPERIMENTS FOR SYSTEMS IN ISOLATION AND WITH STELLAR FLYBYS

The chance that a planetary system will interact with another member of its host star's nascent cluster would be greatly increased if gas giant planets form in situ on wide orbits. In this paper, we explore the outcomes of planet-planet scattering for a distribution of multi-planet systems that all have one of the planets on an initial orbit of 100 AU. The scattering experiments are run with and without stellar flybys. We convolve the outcomes with distributions for protoplanetary disk and stellar cluster sizes to generalize the results where possible. We find that the frequencies of large mutual inclinations and high eccentricities are sensitive to the number of planets in a system, but not strongly to stellar flybys. However, flybys do play a role in changing the low and moderate portions of the mutual inclination distributions, and erase dynamically cold initial conditions on average. Wide-orbit planets can be mixed throughout the planetary system, and in some cases, can potentially become hot Jupiters, which we demonstrate using scattering experiments that include a tidal damping model. If planets form in situ on wide orbits, then there will be discernible differences in the proper-motion distributions of a sample of wide-orbit planets compared with a pure scattering formation mechanism. Stellar flybys can enhance the frequency of ejections in planetary systems, but autoionization is likely to remain the dominant source of free-floating planets.

79 ASTRONOMY AND ASTROPHYSICS↗

McIDAS III - A modern interactive data access and analysis system

A powerful facility for meteorological analysis called the Man Computer Interactive Data Access System (McIDAS) was designed and implemented in the early 1970's at the Space Science and Engineering Center of the University of Wisconsin-Madison. Hardware and software experience gained via extensive use of that facility and its derivatives have led to a newer implementation of McIDAS on a larger computer with significant enhancements to the supporting McIDAS software. McIDAS allows remote and local access to a wide range of data from satellites and conventional observations, time lapse displays of imagery data, overlaid graphics, and current and past meteorological data. Available software allows one to perform analysis of a wide range of digital images as well as temperature and moisture sounding data obtained from satellites. McIDAS can generate multicolor composites of conventional and satellite weather data, radar and forecast data in a wide variety of two- and three-dimensional displays as well as time lapse movies of these analyses. These and other capabilities are described in this paper.

Suomi, V. E.↗

PG 1346+082 - An interacting binary white dwarf system

PG 1346+082 is both a photometric and a spectroscopic variable, spanning the B-magnitude range 13.6-17.2. High-speed photometric data reveal rapid flickering in the low-state light curve. The system also shows spectroscopic variations, displaying broad shallow He I absorption lines at maximum light and a weak emission feature at He I (4471 A) at minimum light. Hydrogen lines are conspicuous by their absence. Is is concluded that PG 1346+082 is an interacting binary white dwarf system. Furthermore, because continuum fits to IUE high-state data suggest temperatures consistent with membership in the DB white dwarf instability strip, it is suggested that some of the photometric variations may arise from pulsations.

Wood, M. A.↗

Investigating Power System Primary and Secondary Reserve Interaction under High Wind Power Penetration

Power system frequency needs to be maintained close to its nominal value at all times to successfully balance load and generation and maintain system reliability. Adequate primary frequency response and secondary frequency response are the primary forces to correct an energy imbalance at the second-to-minute level. As wind energy becomes a larger portion of the world's energy portfolio, there is an increased need for wind to provide frequency response. This paper addresses one of the major concerns about using wind for frequency regulation: the unknown factor of the interaction between primary and secondary reserves. The lack of a commercially available tool to model this has limited the energy industry's understanding of when the depletion of primary reserves will impact the performance of secondary response or vice versa. This paper investigates the issue by developing a multi-area frequency response integration tool with combined primary and secondary capabilities. The simulation is conducted in close coordination with economical energy scheduling scenarios to ensure credible simulation results.

17 WIND ENERGY↗

Evaluation of CO 2 -Fluid-Rock Interaction in Enhanced Geothermal Systems: Field-Scale Geochemical Simulations

Recent studies suggest that using supercritical CO 2 (scCO 2 ) instead of water as a heat transmission fluid in Enhanced Geothermal Systems (EGS) may improve energy extraction. While CO 2 -fluid-rock interactions at “typical” temperatures and pressures of subsurface reservoirs are fairly well known, such understanding for the elevated conditions of EGS is relatively unresolved. Geochemical impacts of CO 2 as a working fluid (“CO 2 -EGS”) compared to those for water as a working fluid (H 2 O-EGS) are needed. The primary objectives of this study are (1) constraining geochemical processes associated with CO 2 -fluid-rock interactions under the high pressures and temperatures of a typical CO 2 -EGS site and (2) comparing geochemical impacts of CO 2 -EGS to geochemical impacts of H 2 O-EGS. The St. John’s Dome CO 2 -EGS research site in Arizona was adopted as a case study. A 3D model of the site was developed. Net heat extraction and mass flow production rates for CO 2 -EGS were larger compared to H 2 O-EGS, suggesting that using scCO 2 as a working fluid may enhance EGS heat extraction. More aqueous CO 2 accumulates within upper- and lower-lying layers than in the injection/production layers, reducing pH values and leading to increased dissolution and precipitation of minerals in those upper and lower layers. Dissolution of oligoclase for water as a working fluid shows smaller magnitude in rates and different distributions in profile than those for scCO 2 as a working fluid. It indicates that geochemical processes of scCO 2 -rock interaction have significant effects on mineral dissolution and precipitation in magnitudes and distributions.

58 GEOSCIENCES↗

Data-Driven Modeling and Control of Systems with Plasma-Surface Interactions (Final Technical Report)

This final technical report summarizes the activities and accomplishments in the period from February 2023 thru January 2026. The objective of the proposed research is to investigate the physical mechanisms and processes underlying the formation of structures and patterns in systems with plasma-surface interactions. In the past decades, there have been extensive studies on the interaction of glow discharges, dielectric barrier discharges, and arc discharges with confining or intervening surfaces. The advancement of the understanding of these phenomena is not only of fundamental scientific interest and relevance to the knowledge of the plasma state, but also with profound implications in various technological applications. The research will integrate theoretical, computational, and experimental work within an innovative framework of data assimilation, i.e., optimally combining model predictions with measurements. The scientific merit of this research has three aspects. Firstly, it extends the studies of plasma-surface interactions to systems with insulator surfaces and multi-layer systems, while existing studies are predominantly on electrode surfaces. Secondly, it expects to develop a novel data-driven modeling approach based on data assimilation to enhance the predictive and control capabilities, which could make transformative contributions to basic plasma research. Thirdly, it will shed new light on outstanding problems related to formation of patterns interfacing plasmas. This project also aims to launch an education and outreach initiative at Texas A&M University-Kingsville, a non-R1, minority-serving institution in South Texas. The initiative is structured as a four-tier pyramid. Tier one will be a webinar series for culture and capacity building to inform broader audience in the region about the research fields of plasma science and engineering. Tier two will be the creation and offering of an upper-level undergraduate course on introductory plasma physics, which will help with the recruitment for the upper tiers. On tier three, we will engage and mentor senior design students to conduct work toward the research goal of this project. There will also be a certificate program on general plasma science for undergrad and graduate students, part of which will be lab training at Princeton University. Tier four will be the supervision and mentoring of Ph.D. students. Therefore, this project will systematically expand the talent pipeline, broaden participation from communities historically and geographically underrepresented in DOE SC research portfolio, significantly improve the research and education capacity at the PI’s institution, and contribute to developing a diverse workforce in plasma science and engineering.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen reduction and metal-support interaction in a metastable metal-oxide system: Pd on rhombohedral In{sub 2}O{sub 3}

Highlights: • Metal-Support interaction in a metastable Pd/rh-In{sub 2}O{sub 3} material. • No influence of metal-support interaction on phase transformation rh-In{sub 2}O{sub 3}→c-In{sub 2}O{sub 3}. • Sequence of hydride, intermetallic compound formation and phase transformation. • High structural stability of reduced rh-In{sub 2}O{sub 3} and associated oxygen vacancies. • Metastable rh-In{sub 2}O{sub 3} more effective in initial intermetallic formation than c-In{sub 2}O{sub 3}. - Abstract: Structural and chemical consequences of reactive metal-support interaction (RMSI) effects occurring under hydrogen reduction in a metastable metal-oxide system have been exemplified for small PdO particles loaded onto rhombohedral In{sub 2}O{sub 3} (PdO/rh-In{sub 2}O{sub 3}) using synchrotron-based in situ X-ray diffraction experiments at temperatures up to 500 °C. rh-In{sub 2}O{sub 3} is a meta-stable In{sub 2}O{sub 3} polymorph that is prone to gas-phase dependent phase transformation to cubic In{sub 2}O{sub 3} (c-In{sub 2}O{sub 3}). Cross-influence of metal-support interaction and phase transformation can therefore be expected in similar temperature regimes. To separate both effects, comparable experiments have also been conducted on pure rh-In{sub 2}O{sub 3}. Phase transformation of pure rh-In{sub 2}O{sub 3} to cubic In{sub 2}O{sub 3} in hydrogen occurs between 415 °C and 450 °C. On Pd/rh-In{sub 2}O{sub 3}, a sequence of PdO reduction to Pd metal, followed by PdH{sub 0.706} hydride formation and subsequently, InPd and In{sub 3}Pd{sub 2} intermetallic compound formation have been observed between 30 °C and 500 °C. After the intermetallic compound formation is finished at around 400 °C, the phase transformation to c-In{sub 2}O{sub 3} sets in at exactly the same temperature as on pure rh-In{sub 2}O{sub 3} and extends over the same temperature range. This proves that the phase transformation of rh-In{sub 2}O{sub 3} to c-In{sub 2}O{sub 3} is not influenced by the reduction and the intermetallic compound formation. In contrast to Pd on c-In{sub 2}O{sub 3}, In-Pd compound formation from rh-In{sub 2}O{sub 3} occurs at much lower temperatures (230 °C vs. 300 °C), despite finally approaching the same compound stoichiometries (InPd and In{sub 3}Pd{sub 2}). This points to a high structural stability of reduced rh-In{sub 2}O{sub 3}/stability of oxygen vacancies (compared to c-In{sub 2}O{sub 3}) as well as to facilitated diffusion of reduced In(-O) species at low temperatures.

36 MATERIALS SCIENCE↗

Resilience Modeling in Complex Engineered Systems with Human-Machine Interactions

In recent times, there has been a growing interest in resilience-based design. Resilience-based design operates on the concept that failures and unexpected events will happen, and when they occur, complex engineered systems should be able to operate within acceptable bounds and recover reasonably. Humans can contribute to the resilience of a system by quickly detecting unforeseen events and taking corrective measures. To this effect, researchers have proposed guidelines and design approaches that can help promote human-system resilience. However, there is no early design stage tool to validate if a system is indeed resilient after applying these guidelines and design methods. In this research, we integrate the Human Error and Functional Failure Reasoning (HEFFR) framework into the fmdtools toolkit to enable designers to model the combined (machine, human, and joint) failures, including their propagation and dynamic effects, during early design stages. This integrated tool also allows designers to model the effects of performance shaping factors, team dynamics, and human-machine interactions in systems of systems. A demonstrative example of a remotely operated rover is explored to demonstrate how this approach can be applied to understand resilience in complex engineered systems with human interactions.

Lukman Irshad↗

Geometric database maintenance using CCTV cameras and overlay graphics

An interactive graphics system using closed circuit television (CCTV) cameras for remote verification and maintenance of a geometric world model database has been demonstrated in GE's telerobotics testbed. The database provides geometric models and locations of objects viewed by CCTV cameras and manipulated by telerobots. To update the database, an operator uses the interactive graphics system to superimpose a wireframe line drawing of an object with known dimensions on a live video scene containing that object. The methodology used is multipoint positioning to easily superimpose a wireframe graphic on the CCTV image of an object in the work scene. An enhanced version of GE's interactive graphics system will provide the object designation function for the operator control station of the Jet Propulsion Laboratory's telerobot demonstration system.

Oxenberg, Sheldon C.↗

What Machines Need to Learn to Support Human Problem-Solving

In the development of intelligent systems that interact with humans, there is often confusion between how the system functions with respect to the humans it interacts with and how it interfaces with those humans. The former is a much deeper challenge than the latter it requires a system-level understanding of evolving human roles as well as an understanding of what humans need to know (and when) in order to perform their tasks. This talk will focus on some of the challenges in getting this right as well as on the type of research and development that results in successful human-autonomy teaming. Brief Bio: Dr. Alonso Vera is Chief of the Human Systems Integration Division at NASA Ames Research Center. His expertise is in human-computer interaction, information systems, artificial intelligence, and computational human performance modeling. He has led the design, development and deployment of mission software systems across NASA robotic and human space flight missions, including Mars Exploration Rovers, Phoenix Mars Lander, ISS, Constellation, and Exploration Systems. Dr. Vera received a Bachelor of Science with First Class Honors from McGill University in 1985 and a Ph.D. from Cornell University in 1991. He went on to a Post-Doctoral Fellowship in the School of Computer Science at Carnegie Mellon University from 1990-93.

intelligent systems↗