Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Constraints on the dark matter annihilation from Fermi-LAT observation of M31

Gamma-ray is a good probe of dark matter (DM) particles in the Universe. We search for the DM annihilation signals in the direction of the Andromeda galaxy (M31) using 7.5 year Fermi-LAT pass 8 data. Similar to Pshirkov et al. (2016), we find that there is residual excess emission from the direction of M31 if only the galactic disk as traced by the far infrared emission is considered. Adding a point-like source will improve the fitting effectively, although additional slight improvements can be found if an extended component such as a uniform disk or two bubbles is added instead. Taking the far infrared disk plus a point source as the background model, we search for the DM annihilation signals in the data. We find that there is strong degeneracy between the emission from the galaxy and that from 10s GeV mass DM annihilation in the main halo with quark final state. However, the required DM annihilation cross section is about 10{sup −25}–10{sup −24} cm{sup 3}s{sup −1}, orders of magnitude larger than the constraints from observations of dwarf spheroidal galaxies, indicating a non-DM origin of the emission. If DM subhalos are taken into account, the degeneracy is broken. When considering the enhancement from DM subhalos, the constraints on DM model parameters are comparable to (or slightly weaker than) those from the population of dwarf spheroidal galaxies. We also discuss the inverse Compton scattering component from DM annihilation induced electrons/positrons. For the first time we include an energy dependent template of the inverse Compton emission (i.e., a template cube) in the data analysis to take into account the effect of diffusion of charged particles. We find a significant improvement of the constraints in the high mass range of DM particles after considering the inverse Compton emission.

79 ASTRONOMY AND ASTROPHYSICS↗

TRANSPORT OF SOLAR ENERGETIC PARTICLES ACCELERATED BY ICME SHOCKS: REPRODUCING THE RESERVOIR PHENOMENON

In this work, gradual solar energetic particle (SEP) events observed by multiple spacecraft are investigated with model simulations. Based on a numerical solution of the Fokker-Planck focused transport equation including perpendicular diffusion of particles, we obtained the fluxes of SEPs accelerated by an interplanetary coronal mass ejection driven shock as it propagates outward through the three-dimensional Parker interplanetary magnetic field. The shock is treated as a moving source of energetic particles with an assumed particle distribution function. We look at the time profiles of particle flux as they are observed simultaneously by multiple spacecraft located at different locations. The dependence of particle fluxes on different levels of perpendicular diffusion is determined. The main purpose of our simulation is to reproduce the reservoir phenomenon, during which it is frequently observed that particle fluxes are nearly the same at very different locations in the inner heliosphere, up to 5 AU, during the decay phase of gradual SEP events. The reservoir phenomenon is reproduced in our simulation under a variety of conditions of perpendicular diffusion of particles estimated from the nonlinear guiding center theory (NLGC). As the perpendicular diffusion coefficient increases, the nonuniformity of particle fluxes becomes smaller, making the reservoir phenomenon more prominent. However, if the shock acceleration strength decreases slower than r {sup -2.5} with the radial distance r, the reservoir phenomenon might disappear, with limited perpendicular diffusion constrained by the NLGC theory. Therefore, observation of the reservoir phenomenon in gradual SEP events can be used to test qualitatively theories of particle diffusion and shock acceleration.

79 ASTRONOMY AND ASTROPHYSICS↗

Adapting confocal Raman microscopy for in situ studies of redox transformations at electrode-electrolyte interfaces

Confocal Raman microscopy was applied to quantify redox species present within the diffusion layer adjacent to an electrode surface under potentiostatic control. A glass microscope coverslip with a thin indium tin oxide (ITO) coating served as both the working electrode and optical window for a microscope-stage mountable spectroelectrochemical cell. A high numerical aperture objective mounted in an inverted microscope frame just below the stage brought excitation radiation through the coverslip window and to a tight focus a few micrometers above the ITO film surface. Species diffusing into the confocal probe volume defined by the excitation beam focus and the collected light region were detected, identified and quantified based on their Raman scattering frequencies and intensities. Here, in measurements that interrogated the interconversion of ferrocyanide and ferricyanide ions as a function of applied voltage, least-squares regression analysis of spectral datasets predicted the formal potential and relative surface concentrations of the ions in good agreement with the expected Nernstian response. Preliminary studies of methyl viologen reduction at an ITO film/Nafion membrane interface were conducted and show the possibility for estimation of mass transport coefficients of redox species within ionic polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Random Walks and Sticky Surfaces: Single-Molecule Measurements of Solute Diffusion in Ethanol/Water-Filled Anodic Alumina Nanopores

Nanoporous anodic aluminum oxide (AAO) membranes are now being explored for use in advanced chemical separations, including in the dehydration of biofuels such as ethanol. Optimization of membrane performance requires an in-depth understanding of how solvent mixtures and solutes behave under nanoconfinement. In this work, the diffusion of rhodamine B (RhB) dye through 10 nm and 20 nm AAO nanopores filled with a series of ethanol/water mixtures (0 - 33% water) is explored by fluorescence correlation spectroscopy (FCS). RhB was found to diffuse through the pores by two distinct mechanisms with mean diffusion coefficients, $D_f$ and $D_s$, reflecting fast and slow diffusive motions, respectively, with values that differ by nearly two orders of magnitude. Further, both $D_f$ and $D_s$ increased with pore size and were significantly smaller than $D_b$, the RhB diffusion coefficient in bulk liquid. Mean $D_f$ values follow a composition-dependent trend that closely mimics the viscosity dependence of $D_b$. Additional slowing of fast RhB diffusion is attributed to both hydrodynamic drag and electrostatic interactions with the nanopore surface. The mean $D_s$ values exhibit a different trend with increasing water content, revealing an increase in $D_s$ and a decrease in the contributions of slow diffusion to the observed dynamics. The fluorescence time transient data used in the analysis show that the slow diffusion process is strongly hindered and likely involves frequent adsorption of RhB to the pore surfaces. These results provide new insights into the detailed molecular-level mechanisms of mass transport in nanoporous AAO membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tidal heating and mass loss in neutron star binaries - Implications for gamma-ray burst models

A neutron star in a close binary orbit around another neutron star (or stellar-mass black hole) spirals inward owing to gravitational radiation. We discuss the effects of tidal dissipation during this process. Tidal energy dissipated in the neutron star's core escapes mainly as neutrinos, but heating of the crust, and outward diffusion of photons, blows off the outer layers of the star. This photon-driven mass loss precedes the final coalescence. The presence of this eject material impedes the escape of gamma-rays created via neutrino interactions. If an e(+) - e(-) fireball, created in the late stages of coalescence, were loaded with (or surrounded by) material with the mean column density of the ejecta, it could not be an efficient source of gamma-rays. Models for cosmologically distant gamma-rays burst that involve neutron stars must therefore be anisotropic, so that the fireball expands preferentially in directions where the column density of previously blown-off material is far below the spherically averaged value which we have calculated. Some possible 'scenarios' along these lines are briefly discussed.

Meszaros, P.↗

POLARIZATION STRUCTURE OF FILAMENTARY CLOUDS

Filaments are considered to be basic structures, and molecular clouds consist of filaments. Filaments are often observed as extending in the direction perpendicular to the interstellar magnetic field. The structure of filaments has been studied based on a magnetohydrostatic equilibrium model. Here we simulate the expected polarization pattern for isothermal magnetohydrostatic filaments. The filament exhibits a polarization pattern in which the magnetic field is apparently perpendicular to the filament when observed from the direction perpendicular to the magnetic field. When the line of sight is parallel to the global magnetic field, the observed polarization pattern is dependent on the center-to-surface density ratio for the filament and the concentration of the gas mass toward the central magnetic flux tube. Filaments with low center-to-surface density ratios have an insignificant degree of polarization when observed from the direction parallel to the global magnetic field. However, models with a large center-to-surface density ratio have polarization patterns that indicate that the filament is perpendicularly threaded by the magnetic field. When mass is heavily concentrated at the central magnetic flux tube, which can be realized by the ambipolar diffusion process, the polarization pattern is similar to that expected for a low center-to-surface density contrast.

79 ASTRONOMY AND ASTROPHYSICS↗

Insights from Synthetic Star-forming Regions. III. Calibration of Measurement and Techniques of Star Formation Rates

Through an extensive set of realistic synthetic observations (produced in Paper I), we assess in this part of the paper series (Paper III) how the choice of observational techniques affects the measurement of star formation rates (SFRs) in star-forming regions. We test the accuracy of commonly used techniques and construct new methods to extract the SFR, so that these findings can be applied to measure the SFR in real regions throughout the Milky Way. We investigate diffuse infrared SFR tracers such as those using 24 μ m, 70 μ m and total infrared emission, which have been previously calibrated for global galaxy scales. We set up a toy model of a galaxy and show that the infrared emission is consistent with the intrinsic SFR using extra-galactic calibrated laws (although the consistency does not prove their reliability). For local scales, we show that these techniques produce completely unreliable results for single star-forming regions, which are governed by different characteristic timescales. We show how calibration of these techniques can be improved for single star-forming regions by adjusting the characteristic timescale and the scaling factor and give suggestions of new calibrations of the diffuse star formation tracers. We show that star-forming regions that are dominated by high-mass stellar feedback experience a rapid drop in infrared emission once high-mass stellar feedback is turned on, which implies different characteristic timescales. Moreover, we explore the measured SFRs calculated directly from the observed young stellar population. We find that the measured point sources follow the evolutionary pace of star formation more directly than diffuse star formation tracers.

79 ASTRONOMY AND ASTROPHYSICS↗

DIFFUSION OF MAGNETIC FIELD AND REMOVAL OF MAGNETIC FLUX FROM CLOUDS VIA TURBULENT RECONNECTION

The diffusion of astrophysical magnetic fields in conducting fluids in the presence of turbulence depends on whether magnetic fields can change their topology via reconnection in highly conducting media. Recent progress in understanding fast magnetic reconnection in the presence of turbulence reassures that the magnetic field behavior in computer simulations and turbulent astrophysical environments is similar, as far as magnetic reconnection is concerned. This makes it meaningful to perform MHD simulations of turbulent flows in order to understand the diffusion of magnetic field in astrophysical environments. Our studies of magnetic field diffusion in turbulent medium reveal interesting new phenomena. First of all, our three-dimensional MHD simulations initiated with anti-correlating magnetic field and gaseous density exhibit at later times a de-correlation of the magnetic field and density, which corresponds well to the observations of the interstellar media. While earlier studies stressed the role of either ambipolar diffusion or time-dependent turbulent fluctuations for de-correlating magnetic field and density, we get the effect of permanent de-correlation with one fluid code, i.e., without invoking ambipolar diffusion. In addition, in the presence of gravity and turbulence, our three-dimensional simulations show the decrease of the magnetic flux-to-mass ratio as the gaseous density at the center of the gravitational potential increases. We observe this effect both in the situations when we start with equilibrium distributions of gas and magnetic field and when we follow the evolution of collapsing dynamically unstable configurations. Thus, the process of turbulent magnetic field removal should be applicable both to quasi-static subcritical molecular clouds and cores and violently collapsing supercritical entities. The increase of the gravitational potential as well as the magnetization of the gas increases the segregation of the mass and magnetic flux in the saturated final state of the simulations, supporting the notion that the reconnection-enabled diffusivity relaxes the magnetic field + gas system in the gravitational field to its minimal energy state. This effect is expected to play an important role in star formation, from its initial stages of concentrating interstellar gas to the final stages of the accretion to the forming protostar. In addition, we benchmark our codes by studying the heat transfer in magnetized compressible fluids and confirm the high rates of turbulent advection of heat obtained in an earlier study.

79 ASTRONOMY AND ASTROPHYSICS↗

CORONAL MASS EJECTION INITIATION BY CONVERGING PHOTOSPHERIC FLOWS: TOWARD A REALISTIC MODEL

In the context of coronal mass ejections triggering, we reconsider the class of models in which the evolution of an active region (AR) is driven by imposed boundary motions converging toward the polarity inversion line (PIL). We introduce a new model problem in which there is a large-scale flow with a diverging structure on the photosphere. This flow is reminiscent of that of the well-known moat flow around each of the two spots of a bipolar AR and transports only part of the magnetic flux toward the PIL. It is thus more compatible with observations than the one used in our previous study, which forced the whole positive and negative polarity parts of the AR approaching each other. We also include a diffusion term associated with small-scale turbulent photospheric motions, but keep the associated diffusivity at a low value in the particular study described here. We show that the evolution of an initial sheared force-free field first leads to the formation of a twisted flux rope which stays in equilibrium for some time. Eventually, however, the configuration suffers a global disruption whose underlying mechanism is found by energetic considerations to be nonequilibrium. It begins indeed when the magnetic energy becomes of the order of the energy of an accessible partially open field. For triggering an eruption by converging flows, it is thus not necessary to advect the whole AR toward the PIL, but only its central part.

79 ASTRONOMY AND ASTROPHYSICS↗

Microstructure of surface cerium hydride growth sites

Samples of cerium were exposed to hydrogen under controlled conditions causing cerium hydride sites to nucleate and grow on the surface. The hydriding rate was measured in situ, and the hydrides were characterised using secondary ion mass spectrometry, scanning electron microscopy, and optical microscopy. The results show that the hydriding rate proceeded more quickly than earlier studies. Characterisation confirmed that the hydrogen is confined to the sites. The morphology of the hydrides was confirmed to be oblate, and stressed material was observed surrounding the hydride, in a number of cases lathlike features were observed surrounding the hydride sites laterally with cracking in the surface oxide above them. It is proposed that during growth the increased lattice parameter of the CeH{sub 2} induces a lateral compressive stress around the hydride, which relieves by the ca. 16% volume collapse of the γ-Ce to α-Ce pressure induced phase transition. Cracking of the surface oxide above the laths reduces the diffusion barrier to hydrogen reaching the metal/oxide interface surrounding the hydride site and contributes to the anisotropic growth of the hydrides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insights into thermal diffusion of germanium and oxygen atoms in HfO{sub 2}/GeO{sub 2}/Ge gate stacks and their suppressed reaction with atomically thin AlO{sub x} interlayers

The thermal diffusion of germanium and oxygen atoms in HfO{sub 2}/GeO{sub 2}/Ge gate stacks was comprehensively evaluated by x-ray photoelectron spectroscopy and secondary ion mass spectrometry combined with an isotopic labeling technique. It was found that {sup 18}O-tracers composing the GeO{sub 2} underlayers diffuse within the HfO{sub 2} overlayers based on Fick's law with the low activation energy of about 0.5 eV. Although out-diffusion of the germanium atoms through HfO{sub 2} also proceeded at the low temperatures of around 200 °C, the diffusing germanium atoms preferentially segregated on the HfO{sub 2} surfaces, and the reaction was further enhanced at high temperatures with the assistance of GeO desorption. A technique to insert atomically thin AlO{sub x} interlayers between the HfO{sub 2} and GeO{sub 2} layers was proven to effectively suppress both of these independent germanium and oxygen intermixing reactions in the gate stacks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical and Thermodynamic Properties of Secondary Organic Materials for Modeling (Final Technical Report)

Secondary organic material constitutes more than 50% of the submicron component of atmospheric aerosol particles. This organic material is produced by oxidation of biogenic and anthropogenic volatile organic compounds. The physicochemical properties of these aerosol particles and their variability with atmospheric conditions influence many climate-relevant endpoints, such as rates of chemical reactions, production of secondary organic material, number-diameter distributions, direct radiative forcing, and cloud condensation nuclei. The results of the project research highlight a nonlabile-to-labile transition for material representative of anthropogenic secondary organic particulate matter at a threshold humidity range. This behavior differs markedly from materials representing biogenic aerosol sources, which lack such a transition. More specifically, the mass lability of atmospheric organic particulate matter, meaning its tendency to evaporate, is an important property in the mechanisms governing the climate effects. This property is affected by both the volatility and the molecular diffusivity of the constituent organic species. Via a series of laboratory experiments, the project directly determined the mass labilities of films of secondary organic material representative of anthropogenic and biogenic organic particulate matter (PM). The evaporation rates for anthropogenic organic PM increased above a threshold relative humidity (RH) between 20% and 30%, indicating rapid partitioning above a transition RH. Below the threshold, the characteristic time for equilibration was estimated at up to 1 week for a typically sized particle. In contrast, for films representing biogenic PM, no RH threshold was observed, suggesting equilibrium partitioning is rapidly obtained for all RHs. The effective molecular diffusivity for the biogenic case was at least 1000 times greater than that of the anthropogenic case. The results allow for an improved representation of anthropogenic and biogenic secondary organic aerosol formation in climate models. The results of the project also provide new measurements on how organic aerosol particles take up water and serve as cloud condensation nuclei, thus explaining the observed complex thermodynamic behaviors using a simple thermodynamic model. The project results reconciled the discrepancy between sub-saturation hygroscopicity and super-saturation cloud condensation nuclei activity for organic aerosol particles. The key to the explanation is the phase separation between hydrophobic and hydrophilic organics and the induced surface tension lowering. The results are essential for the assessment of the aerosol indirect effect on climate. In more detail, hygroscopic growth and cloud condensation nuclei activation are key processes for accurately modeling the climate impacts of organic particulate matter. Nevertheless, the microphysical mechanisms of these processes remain unresolved. The project results focus on complex thermodynamic behaviors, including humidity-dependent hygroscopicity, diameter-dependent cloud condensation nuclei activity, and liquid-liquid phase separation in the laboratory for biogenically derived secondary organic material representative of similar atmospheric organic particulate matter. These behaviors can be explained by the non-ideal mixing of water with hydrophobic and hydrophilic organic components. The non-ideality-driven liquid-liquid phase separation further enhances water uptake and induces lowered surface tension at high relative humidity, which results in a lower barrier to cloud condensation nuclei activation. By comparison, secondary organic material representing anthropogenic sources does not exhibit complex thermodynamic behavior. The combined results highlight the importance of detailed thermodynamic representations of the hygroscopicity and cloud condensation nuclei activity in models of the Earth’s climate system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methane mass transfer in mesoporous silica saturated with liquid hydrocarbons

Mass transfer across gas/liquid interfaces plays a central role in many industrial applications. In particular, gas dissolution and diffusion in liquid hydrocarbon mixtures, confined in nanometer-sized pores, is an essential mechanism during enhanced oil recovery (EOR) from unconventional formations. In this work, we have measured methane (C 1 ) diffusion in n-decane (C 10 ), n-hexadecane (C 16 ), and mixtures of C 10 + C 16 in a mesoporous material with an average pore size of 4 nm at 50 °C and ~ 8 MPa of gas pressure. A key conclusion of this work is that the diffusivities, measured in the bulk phase, for the relevant binary systems, are sufficient to predict the diffusion behavior of the corresponding multicomponent systems in the porous medium by using Wilke’s equation for the evaluation of effective component diffusivities, combined with an accurate equation of state (EOS) representation of the (bulk) phase behavior. This observation can facilitate accurate prediction of recovery processes in unconventional formations and, potentially, guide other applications that entail gas-liquid interface mass transfer in mesoporous materials.

42 ENGINEERING↗

An isomerization-induced cage-breaking process in a molecular glass former below T{sub g}

A recent experimental [P. Karageorgiev, D. Neher, B. Schulz, B. Stiller, U. Pietsch, M. Giersig, L. Brehmer, Nature Mater. 4, 699 (2005)] study has found liquidlike diffusion below the glass-transition temperature in azobenzene-containing materials under irradiation. This result suggests that the isomerization-induced massive mass transport that leads to surface relief gratings formation in these materials, is induced by this huge increase of the matrix diffusion coefficient around the probe. In order to investigate the microscopic origin of the increase of the diffusion, we use molecular dynamics simulations of the photoisomerization of probe dispersed red 1 molecules dispersed inside a glassy molecular matrix. Results show that the increased diffusion is due to an isomerization-induced cage-breaking process. A process that explains the induced cooperative motions recently observed in these photoactive materials.

36 MATERIALS SCIENCE↗

Analysis of the dynamics of coal char combustion with ignition and extinction phenomena: Shrinking core model

Single-particle combustion of coal char is analyzed using a generalized shrinking core model. Finite volume method, which was earlier employed by the authors in solving moving boundary problems involving fluid-solid noncatalytic reactions in general, is used to solve fully transient mass and energy equations. The model takes into account convection and diffusion inside the particle as well as in the boundary layer. The computed results are compared with the experimental data of the authors for combustion of coal char in a fluidized bed combustor. The effects of parameters such as bulk temperature and initial particle radius on the combustion dynamics are examined. The phenomena of ignition and extinction are also investigated. Finally, the importance of Stefan flow, originating due to nonequimolar counterdiffusion, on combustion of coal char is analyzed.

01 COAL, LIGNITE, AND PEAT↗

Simple analytical model for fitting QENS data from liquids

The advent of new generation of neutron spectrometers for quasielastic scattering measurements has demonstrated the need for multi-component (at least two-component) fitting of data collected from liquids. The narrowest component is associated with long-range translational diffusion, whereas the broader component originates from localized center-of-mass motions in the transient cage of the nearest neighbors. Intra-particle dynamics (e.g., of molecular side groups) may give rise to additional components besides the center-of-mass motions. We present a simple analytical model for two-component fits of quasielastic neutron scattering data collected from liquids. Here, the use of such models is optional (albeit helpful) in the traditional approach, where fits are performed sequentially and independently for the data collected at separate Q values, but imperative in the global fitting, where the data are fitted simultaneously at all Q values, which may be necessary to rationalize the data from increasingly complex systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetics Tuning the Electrochemistry of Lithium Dendrites Formation in Lithium Batteries through Electrolytes

Lithium batteries are one of the most advance energy storage devices in the world and have attracted extensive research interests. However, lithium dendrite growth was a safety issue which handicapped the application of pure lithium metal in the negative electrode. In this paper, two solvents, propylene carbonate (PC) and 2-methyl-tetrahydrofuran (2MeTHF), and four Li + salts, LiPF 6 , LiAsF 6 , LiBF 4 and LiClO 4 were investigated in terms of their effects on the kinetics of lithium dendrite formation in eight electrolyte solutions. The kinetic parameters of charge transfer step (exchange current density, j 0 , transfer coefficient, α) of Li + /Li redox system, the mass transfer parameters of Li + (transfer number of Li + , t Li+ , diffusion coefficient of Li + , D Li+ ), and the conductivity (κ) of each electrolyte were studied separately. The results demonstrate that the solvents play a critical role in the measured j 0 , t Li+ , D Li+ , and κ of the electrolyte, while the choice of Li + salts only slightly affect the measured parameters. Finally, the understanding of the kinetics will gain insight into the mechanism of lithium dendrite formation and provide guidelines to the future application of lithium metal.

2-methyl-tetrahydrofuran↗

Mesoporous silica-encapsulated gold core–shell nanoparticles for active solvent-free benzyl alcohol oxidation

Silica-encapsulated gold core@shell nanoparticles (Au@SiO2 CSNPs) were synthesized via a bottom-up procedure and used to catalyze the selective oxidation of benzyl alcohol. The pore size, morphology, crystallinity and composition of Au@SiO2 was evaluated using non-local density functional theory, transmission electron microscopy, high-energy x-ray diffraction and inductively coupled plasma-mass spectroscopy, respectively. The nanoparticles exhibit a mesoporous shell with an average thickness of 25.5 Å which can enhance selectivity via preferential transport of the desired product (i.e., benzaldehyde) relative to larger, undesired products (i.e, benzoic acid/benzyl benzoate). GC-FID analysis revealed the addition of potassium carbonate to the solvent-free oxidation of benzyl alcohol increased conversion from 17.3 to 60.4% while decreasing selectivity from 98.7 to 75.0%. Under equivalent conditions, a bare gold nanoparticle control catalyst deposited on a silica support with a similar gold surface area took 6 times as long to reach the same conversion, achieving only 49.4% selectivity. These results suggest that the pore size distribution within the inert silica shell of Au@SiO2 CSNPs inhibits the formation of undesired products to facilitate the selective oxidation of benzaldehyde despite a basic environment, which reduces selectivity under typical conditions. The CSNPs demonstrated a much lower activation energy than the Au-SiO2 control catalyst, 37 ± 1.9 kJ/mol and 72 ± 7.1 kJ/mol, respectively. Thiele modulus analysis indicates the CSNP pore structure does not create a mass transport limitation due to the nano-scale path of diffusion through the pore structure to the active surface. The lower activation energy and mesopore distribution together suggest the Au@SiO2 catalyst demonstrates higher activity through beneficial in-pore orientation, both reducing competitive adsorption and promoting a single, lower activation energy mechanistic pathway.

benzyl alcohol oxidation, catalysis, confinement↗