Search NASA⌕ Search

SEARCH · Search NASA

Results for “mean squared error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Effects of Resolution and Spectral Nudging in Simulation the Effects of Wintertime Atmospheric River Landfalls in the Western US

Landfalling atmospheric rivers (ARs) play a crucial role in the climate of the US Pacific coast region as they are frequently related with heavy precipitation and flash flooding events. Thus, the capability of climate models to accurately simulate AR landfalls and their key hydrologic effects is an important practical concern for WUS, from flood forecasting to future water resources projections. In order to examine the effects of model configuration, including the resolution and spectral nudging, in simulating the climatology of key weather events in the conterminous US, a NASA team has performed a hindcast experiment using the GEOS5 global and the NU-WRF regional models for Nov 1999 - Oct 2010. This study examines the skill of these hindcasts, with different models and their configurations, in simulating key footprints of landfalling ARs in the WUS region. Using an AR-landfall chronology based on the vertically-integrated water vapor flux calculated from the MERRA2 reanalysis, we have analyzed the observed and simulated precipitation and temperature anomalies associated with wintertime AR landfalls along the US Pacific coast. Model skill is measured using metrics including regional means, a skill score based on correlations and mean-square errors, and Taylor diagrams in four WUS Bukovsky regions. Results show that the AR-related anomalies of precipitation is more reliable than of surface temperatures. Model skill also varies according to regions. The AR temperature anomalies are well simulated in most of the WUS region except PNW. For precipitation, simulations with finer spatial resolution tend to generate larger spatial variability and agree better with the PRISM data in most regions. Such a resolution dependence of spatial variability is not found for temperatures; e.g., the MERRA2 reanalysis often outperforms, with similar spatial variability and higher pattern correlations with the PRISM data, finer-resolution NU-WRF runs in simulating temperature variations within subregions. Results from this study will be summarized to assist future (regional) climate experiments for climate change impact assessments and developing adaptationmitigation strategies, the key elements of the National Climate Assessment.

Simulation↗

The SMAP Level-4 ECO Product - Phase 1: Improving Vegetation Simulations Through Observation-Driven Parameter Estimation

Simulations of hydrological fields as well as water, energy and carbon fluxes from the land surface to the atmosphere are crucial for a wide range of applications, including agricultural advisories, forecasts of (short-term) atmospheric behavior and seasonal weather predictions including forecasts of extreme events, such as heatwaves or droughts. The NASA Soil Moisture Active Passive (SMAP) mission Level-4 (L4) Eco-Hydrology (ECO) project aims to improve modeled estimates of the terrestrial water, energy and carbon fluxes and states by developing a fully-coupled hydrology-vegetation data assimilation (DA) algorithm. The DA system is developed for the NASA Goddard Earth Observing System version 5 (GEOS-5) Catchment-CN land surface model, which combines land hydrology components of the GEOS-5 Catchment model with dynamic vegetation components of the Community Land Model version 4. Catchment-CN fully couples the terrestrial water, energy and carbon cycles, allowing feedbacks from the land hydrology to the biosphere and vice versa. For SMAP L4 ECO a calibration of the Catchment-CN vegetation parameterization against observations of the fraction of absorbed photosynthetically active radiation (FPAR) from the Moderate Resolution Imaging Spectroradiometer (MODIS) is implemented to improve the model's standalone skill. Next, the DA algorithm used to produce the SMAP L4 soil moisture product is adapted to Catchment-CN to assimilate SMAP brightness temperatures and inform the model's land hydrology component. The DA system is further extended to assimilate MODIS FPAR observations in order to constrain the model's dynamic vegetation component. In this presentation, we demonstrate that the Catchment-CN parameter calibration leads to more realistic vegetation simulations and reduces the root mean squared error between modeled and observed vegetation states across the model's various plant functional types. We also show that the assimilation of SMAP observations is able to improve the average correlation, bias and unbiased RMSE between the modeled surface and root zone soil moisture estimates, and ground observations from the SMAP core validation sites.

Kolassa, J.↗

Evaluation of SMAP Downscaled Brightness Temperature Using SMAPEx-4/5 Airborne Observations

The Soil Moisture Active and Passive (SMAP) mission, launched by the National Aeronautics and Space Administration (NASA) on 31st January 2015, was designed to provide global soil moisture every 2 to 3 days at 9 km resolution by downscaling SMAP passive microwave observations obtained at 36 km resolution using active microwave observations at 3 km resolution, and then retrieving soil moisture from the resulting 9 km brightness temperature product. This study evaluated the SMAP Active/Passive (AP) downscaling algorithm together with other resolution enhancement techniques. Airborne passive microwave observations acquired at 1 km resolution over the Murrumbidgee River catchment in south-eastern Australia during the fourth and fifth Soil Moisture Active Passive Experiments (SMAPEx-4/5) were used as reference data. The SMAPEx-4/5 data were collected in May and September 2015, respectively, and aggregated to 9 km for direct comparison with a number of available resolution-enhanced brightness temperature estimates. The results show that the SMAP AP downscaled brightness temperature had a correlation coefficient (R) of 0.84 and Root-Mean-Squared Error (RMSE) of ~10 K, while SMAP Enhanced, Nearest Neighbour, Weighted Average, and the Smoothing Filter-based Modulation (SFIM) brightness temperature estimates had somewhat better performance (RMSEs of ~7 K and an R exceeding 0.9). Although the SFIM had the lowest unbiased RMSE of ~6 K, the effect of cloud cover on Ka-band observations limits data availability.

downscaled brightness temperature↗

Assessment of Soil Moisture Retrievals Using SMAP and ELBARA-III Measurements in a Tibetan Meadow Ecosystem

This study presents results evaluating retrievals of liquid water content for both thawed and frozen soils based on simultaneous SMAP and ELBARA-III measurements in a Tibetan meadow ecosystem. A good agreement is found between time series of the SMAP and ELBARA-III T(sub B(sup P)) measurements (R≥0.87). Differences noted between the two data sets are linked to distinct liquid water content variations found in the specific footprints, and the SMAP measurements are better explained by the in-situ liquid water content. Furthermore, the in-situ liquid water content shows better agreements with both SMAP and ELBARA-III measured T(sub B(sup P)) at horizontal polarization in the cold season, while the measurements at vertical polarization are more consistently varying with the liquid water content for the warm season. With the implementation of new vegetation and surface roughness parameterizations, the dynamics of in-situ liquid water content are better reproduced by corresponding retrievals for both thawed and frozen soils, leading to the reduction of the unbiased root mean-square error (ubRMSE) by more than 31 % in comparison to these retrievals using SMAP default parameterizations. Notably, the single channel algorithm configured with the new parameterizations using SMAP measured vertical polarization during the ascending overpass provides the best liquid water content retrievals with an ubRMSE of 0.035 cu m -cu m that outperforms the SMAP mission specification.

L-band microwave radiometry↗

The NASA Eulerian Snow on Sea Ice Model (NESOSIM) v1.0: initial model development and analysis

The NASA Eulerian Snow On Sea Ice Model (NESOSIM) is a new, open-source snow budget model that is currentlyconfigured to produce daily estimates of the depth and density of snow on sea ice across the Arctic Ocean throughthe accumulation season. NESOSIM has been developed in a three-dimensional Eulerian framework and includes two(vertical) snow layers and several simple parameterizations (accumulation, wind packing, advection_divergence, blowingsnow lost to leads) to represent key sources and sinks of snow on sea ice. The model is forced with daily inputs of snowfall and near-surface winds (from reanalyses), sea ice concentration (from satellite passive microwave data) and sea ice drift (from satellite feature tracking) during the accumulation season (August through April). In this study, we present the NESOSIM formulation, calibration efforts, sensitivity studies and validation efforts across an Arctic Ocean domain (100 km horizontal resolution). The simulated snow depth and density are calibrated with in situ data collected on drifting ice stations during the 1980s. NESOSIM shows strong agreement with the in situ seasonal cycles of snow depth and density, and shows good (moderate) agreement with the regional snow depth (density) distributions. NESOSIM is run for a contemporary period (2000 to 2015), with the results showing strong sensitivity to the reanalysis derived snowfall forcing data, with the Modern-Era Retrospective analysis for Research and Applications (MERRA) and the Japanese Meteorological Agency 55-year reanalysis (JRA-55) forced snow depths generally higher than ERA-Interim,and the Arctic System Reanalysis (ASR) generally lower. We also generate and force NESOSIM with a consensus "median" daily snowfall dataset from these reanalyses.The results are compared against snow depth estimates derived from NASA's Operation IceBridge (OIB) snow radar data from 2009 to 2015, showing moderate_strong correlations and root mean squared errors of 10 cm depending on the OIB snow depth product analyzed, similar to the comparisons between OIB snow depths and the commonly used modified Warren snow depth climatology. Potential improvements to this initial NESOSIM formulation are discussed in the hopes of improving the accuracy and reliability of these simulated snow depths and densities.

Petty, Alek A.↗

Updated MISR Over-Water Research Aerosol Retrieval Algorithm - Part 2: A Multi-Angle Aerosol Retrieval Algorithm for Shallow, Turbid, Oligotrophic, and Eutrophic Waters

Coastal waters serve as transport pathways to the ocean for all agricultural and other runoff from terrestrial sources, and many are the sites for upwelling of nutrient rich, deep water; they are also some of the most biologically productive on Earth. Estimating the impact coastal waters have on the global carbon budget requires relating satellite-based remote-sensing retrievals of biological productivity (e.g., chlorophyll alpha concentration) to in situ measurements taken in near-surface waters. The Multi-angle Imaging SpectroRadiometer (MISR) can uniquely constrain the "atmospheric correction" needed to derive ocean color from remote-sensing imagers. Here, we retrieve aerosol amount and type from MISR over all types of water. The primary limitation is an upper bound on aerosol optical depth (AOD), as the algorithm must be able to distinguish the surface. This updated MISR research aerosol retrieval algorithm (RA) also assumes that light reflection by the underlying ocean surface is Lambertian. The RA computes the ocean surface reflectance (R (sub rs)) analytically for a given AOD, aerosol optical model, and wind speed. We provide retrieval examples over shallow, turbid, and eutrophic waters and introduce a productivity and turbidity index (PTI), calculated from retrieved spectral R (sub rs), that distinguished water types (similar to the the normalized difference vegetation index, NDVI, over land). We also validate the new algorithm by comparing spectral AOD and Angstrom exponent (ANG) results with 2419 collocated AErosol RObotic NETwork (AERONET) observations. For AERONET 558 nanometer-interpolated AOD less than 1.0, the root-mean square error (RMSE) is 0.04 and linear correlation coefficient is 0.95. For the 502 cloud-free MISR and AERONET collocations with an AERONET AOD greater than 0.20, the ANG RMSE is 0.25 and r is 0.89. Although MISR RA AOD retrieval quality does not appear to be substantially impacted by the presence of turbid water, the MISR-RA-retrieved Angstrom exponent seems to suffer from increased uncertainty under such conditions. MISR supplements current ocean color sources in regions where sunglint precludes retrievals from single-view-angle instruments. MISR atmospheric correction should also be more robust than that derived from single-view instruments such as the Moderate Resolution Imaging Spectroradiometer (MODIS). This is especially true in regions of shallow, turbid, and eutrophic waters, locations where biological productivity can be high, and single-view-angle retrieval algorithms struggle to separate atmospheric from oceanic features.

Satellite Remote Sensing↗

Remote Sensing Based Yield Monitoring: Application to Winter Wheat in United States and Ukraine

Accurate and timely crop yield forecasts are critical for making informed agricultural policies and investments, as well as increasing market efficiency and stability. Earth observation data from space can contribute to agricultural monitoring, including crop yield assessment and forecasting. In this study, we present a new crop yield model based on the Difference Vegetation Index (DVI) extracted from Moderate Resolution Imaging Spectroradiometer (MODIS) data at 1 km resolution and the un-mixing of DVI at coarse resolution to a pure wheat signal (100 percent of wheat within the pixel). The model was applied to estimate the national and subnational winter wheat yield in the United States and Ukraine from 2001 to 2017. The model at the subnational level shows very good performance for both countries with a coefficient of determination higher than 0.7 and a root mean square error (RMSE) of lower than 0.6 t/ha (tonnes per hectare) (15-18 percent). At the national level for the United States (US) and Ukraine the model provides a strong coefficient of determination of 0.81 and 0.86, respectively, which demonstrates good performance at this scale. The model was also able to capture low winter wheat yields during years with extreme weather events, for example 2002 in US and 2003 in Ukraine. The RMSE of the model for the US at the national scale is 0.11 t/ha (3.7 percent) while for Ukraine it is 0.27 t/ha (8.4 percent).

DVI↗

Remote Sensing Based Yield Monitoring: Application to Winter Wheat in United States and Ukraine

Accurate and timely crop yield forecasts are critical for making informed agricultural policies and investments, as well as increasing market efficiency and stability. Earth observation data from space can contribute to agricultural monitoring, including crop yield assessment and forecasting. In this study, we present a new crop yield model based on the Difference Vegetation Index (DVI) extracted from Moderate Resolution Imaging Spectroradiometer (MODIS) data at 1 km resolution and the un-mixing of DVI at coarse resolution to a pure wheat signal (100% of wheat within the pixel). The model was applied to estimate the national and subnational winter wheat yield in the United States and Ukraine from 2001 to 2017. The model at the subnational level shows very good performance for both countries with a coefficient of determination higher than 0.7 and a root mean square error (RMSE) of lower than 0.6 t/ha (15–18%). At the national level for the United States (US) and Ukraine the model provides a strong coefficient of determination of 0.81 and 0.86, respectively, which demonstrates good performance at this scale. The model was also able to capture low winter wheat yields during years with extreme weather events, for example 2002 in US and 2003 in Ukraine. The RMSE of the model for the US at the national scale is 0.11 t/ha (3.7%) while for Ukraine it is 0.27 t/ha (8.4%).

remote sensing↗

Assimilation of Satellite-Based Snow Cover and Freeze/Thaw Observations Over the High Mountain Asia

Toward qualifying hydrologic changes in the High Mountain Asia (HMA) region, this study explores the use of a hyper-resolution (1 km) land data assimilation (DA)framework developed within the NASA Land Information System using the Noah Multi-parameterization Land Surface Model (Noah-MP) forced by the meteorological boundary conditions from Modern-Era Retrospective analysis for Research and Applications, Version 2 data. Two different sets of DA experiments are conducted:(1) the assimilation of a satellite-derived snow cover map (MOD10A1) and (2) the assimilation of the NASA MEaSUREs landscape freeze/thaw product from 2007 to 2008. The performance of the snow cover assimilation is evaluated via comparisons with available remote sensing-based snow water equivalent product and ground-based snow depth measurements. For example, in the comparison against ground-based snow depth measurements, the majority of the stations (13 of 14) show slightly improved goodness-of-fit statistics as a result of the snow DA, but only four are statistically significant. In addition, comparisons to the satellite-based land surface temperature products (MOD11A1 and MYD11A1) show that freeze/thaw DA yields improvements (at certain grid cells) of up to 0.58 K in the root-mean-square error (RMSE) and 0.77K in the absolute bias (relative to model-only simulations). In the comparison against three ground-based soil temperature measurements along the Himalayas, the bias and the RMSE in the 0-10 cm soil temperature are reduced (on average) by 10 and 7%,respectively. The improvements in the top layer of soil estimates also propagate through the deeper soil layers, where the bias and the RMSE in the 10-40 cm soil temperature are reduced (on average) by 9 and 6%, respectively. However, no statistically significant skill differences are observed for the freeze/thaw DA system in the comparisons against ground-based surface temperature measurements at mid-to-low altitude. Therefore, the two proposed DA schemes show the potential of improving the predictability of snow mass, surface temperature, and soil temperature states across HMA, but more ground-based measurements are still required, especially at high-altitudes, in order to document a more statistically significant improvement as a result of the two DA schemes.

High Mountain Asia↗

Estimating Alpine Snow Depth by Combining Multi-Frequency Passive Radiance Observations with Ensemble Snowpack Modeling

This paper presents a physically-based snow depth retrieval algorithm adapted for deep mountainous snowpack and airborne multifrequency (10.7, 18.7, 37.0 and 89.0 GHz) passive microwave (PM) radiance observations from a single flight. The algorithm employs a single forecast-analysis cycle of a traditional sequential assimilation scheme. It uses an ensemble of multi-layer snowpack model runs to resolve snow microstructure and melt-refreeze crusts, andmicrowave radiative transfer models to relate snow properties to microwave measurements.Snow depth was retrieved at a 120 m spatial resolution over three 1 km2 Intensive Study Area (ISA) within the Rabbit Ears Meso-Cell Study Area (MSA) from the NASA Cold Land Processes Experiment (CLPX) in Colorado (United States) for one date in February 2003. When evaluated against in situ observations, root mean square error (RMSE) of the snow depth from the assimilation was 13.3 cm for areas with low (<5 %) forest cover, which was a reduction of 48 % in the RMSE compared with the modeled snow depth when the PM observations were not assimilated; indicating a ~5% relative error of the posterior snow depth with respect to the average snow depth (200 cm) measured at these pixels. For pixels with forest cover ranging from 5-15% and 15-30%, results were improved (R2 increased from 0.65 to 0.71 and from 0 to 0.38, respectively) by introducing a forest radiative transfer model during the assimilation.

Airborne Multifrequency↗

Multibaseline TanDEM-X Mangrove Height Estimation: The Selection of the Vertical Wavenumber

We generated a large-scale mangrove forest height map using multiple TanDEM-X (TDX) interferometric synthetic aperture radar (InSAR) acquisitions with various spatial baselines in order to improve the height estimation accuracy across a wide range of forest heights. The forest height inversion using InSAR data is strongly dependent upon the vertical wavenumber (i.e., perpendicular baseline). First, we investigated the role of the vertical wavenumber in forest height inversion from InSAR data using the sensitivity of the interferometric (volume) coherence to forest height. We used corrected but lower resolution and accuracy Shuttle Radar Topography Mission (SRTM) mangrove height maps as a priori information over Akanda and Pongara National Parks in Gabon to estimate lower and upper boundaries of the vertical wavenumber over test sites from the measured coherence-to-height sensitivity. Only TDX acquisitions within the boundaries of the vertical wavenumber were selected and combined for multibaseline mangrove height inversion. Mangrove forest height was obtained with multibaseline TDX acquisitions and was validated against the reference height derived from field measurement data providing improvements in multibaseline inversion over existing height estimates (i.e., SRTM height) and single-baseline inversions (multibaseline inversion: r(exp 2) = 0.98, root mean square error (RMSE) of 2.73 m; SRTM height: r(exp 2) = 0.86, RMSE = 7.21 m; single-baseline inversions: r(exp 2) = 0.08-0.97, RMSE = 3.86-11.10 m). As a result, to accurately estimate forest heights over a wide range (3-60 m), multibaseline InSAR acquisitions (at least three different baselines) are needed to exclude biases associated with the vertical wavenumber in forest height inversion.

vertical wavenumber.↗

Deriving High-Resolution Reservoir Bathymetry from ICESat-2 Prototype Photon-Counting Lidar and Landsat Imagery

Knowledge of reservoir bathymetry is essential for many studies on terrestrial hydrological and biogeochemical processes. However, there are currently no cost-effective approaches to derive reservoir bathymetry at the global scale. This study explores the potential of generating high-resolution global bathymetry using elevation data collected by the 532-nm Advanced Topographic Laser Altimeter System (ATLAS) onboard the Ice, Cloud, and Land Elevation Satellite (ICESat-2). The novel algorithm was developed and tested using the ICESat-2 airborne prototype, the Multiple Altimeter Beam Experimental Lidar (MABEL), with Landsat-based water classifications (from 1982 to 2017). MABEL photon elevations were paired with Landsat water occurrence percentiles to establish the elevation-area (E-A) relationship, which in turn was applied to the percentile image to obtain partial bathymetry over the historic dynamic range of reservoir area. The bathymetry for the central area was projected to achieve the full bathymetry. The bathymetry image was then embedded onto the digital elevation model (DEM). Results were validated over Lake Mead against survey data. Results over four transects show coefficient of determination (R²) values from 0.82 to 0.99 and root-mean-square error (RMSE) values from 1.18 to 2.36 m. In addition, the E-A and elevation-storage (E-S) curves have RMSEs of 1.56 m and 0.08 km³, respectively. Over the entire dynamic reservoir area, the derived bathymetry agrees very well with independent survey data, except for within the highest and lowest percentile bands. With abundant overpassing tracks and high spatial resolution, the newly launched ICESat-2 should enable the derivation of bathymetry over an unprecedented number of reservoirs.

Yao Li↗

Winter Wheat Yield Assessment from Landsat 8 and Sentinel-2 Data: Incorporating Surface Reflectance, Through Phenological Fitting, into Regression Yield Models

A combination of Landsat 8 and Sentinel-2 offers a high frequency of observations (3–5 days) at moderate spatial resolution (10–30 m), which is essential for crop yield studies. Existing methods traditionally apply vegetation indices (VIs) that incorporate surface reflectances (SRs) in two or more spectral bands into a single variable, and rarely address the incorporation of SRs into empirical regression models of crop yield. In this work, we address these issues by normalizing satellite data (both VIs and SRs) derived from NASA’s Harmonized Landsat Sentinel-2 (HLS) product, through a phenological fitting. We apply a quadratic function to fit VIs or SRs against accumulated growing degree days (AGDDs), which affects the rate of crop development. The derived phenological metrics for VIs and SRs, namely peak, area under curve (AUC), and fitting coefficients from a quadratic function, were used to build empirical regression winter wheat models at a regional scale in Ukraine for three years, 2016–2018. The best results were achieved for the model with near infrared (NIR) and red spectral bands and derived AUC, constant, linear, and quadratic coefficients of the quadratic model. The best model yielded a root mean square error (RMSE) of 0.201 t/ha (5.4%) and coefficient of determination R2 = 0.73 on cross-validation.

phenological fitting↗

Comprehensive Assessment of Models and Events Using Library Tools (CAMEL) Framework: Time Series Comparisons

The Comprehensive Assessment of Models and Events using Library Tools (CAMEL) framework leverages existing Community Coordinated Modeling Center services: Run on Request post processing tools that generate model time series outputs and the new Community Coordinated Modeling Center Metadata Registry that describes simulation runs using Space Physics Archive Search and Extract metadata. The new CAMEL visualization tool compares the modeled time series with observational data and computes a suite of skill scores such as Prediction Efficiency, Root Mean Square Error, and Symmetric Signed Percentage Bias. Model data pairs used for skill calculations are obtained considering a user selected maximum difference between the time of observation and the nearest model output. The system renders available data for all locations and time periods selected using interactive visualizations that allow the user to zoom, pan, and pick data values along traces. Skill scores are reported for each selected event or aggregated over all events for all participating model runs. Separately, scores are reported for all locations (satellites or stations) and for each location individually. We are building on past experiences with model data comparisons of magnetosphere and ionosphere model outputs from GEM2008, GEMCEDAR Electrodynamics Thermosphere Ionosphere, and the SWPC Operational Space Weather Model challenges. The CAMEL visualization tool is demonstrated using three validation studies: (a) Wang Sheeley Arge heliosphere simulations compared against OMNI solar wind data, (b) ground magnetic perturbations from several magnetosphere and ionosphere electrodynamics models as observed by magnetometers, and (c) electron fluxes from several ring current simulations compared to Radiation Belt Storm Probes Helium Oxygen Proton Electron instrument measurements, integrated over different energy ranges.

Rastätter, Lutz↗

Statistical Study on Multispacecraft Widespread Solar Energetic Particle Events During Solar Cycle 24

We conduct a statistical study on the large three-spacecraft widespread solar energetic particle (SEP) events. Longitudinal distributions of the peak intensities, onset delays, and relation between the SEP intensity, coronal mass ejection (CME) shock speed, width, and the kinetic energy of the CME have been investigated. We apply a Gaussian fit to obtain the SEP intensity Io and distribution width and a forward-modeling fit to determine the true shock speed and true CME width. We found a good correction between and connection angel to the flare site and Io and the kinetic energy of the CME. By including the true chock speed and true CME widths, we reduce root-mean-square errors on the predicted SEP intensity by ~41% for protons compared to Richards et al.'s (2014, https://doi.org/10.1007/s11207-014-0524-8) prediction. The improved correction between the CME kinetic energy and SEP intensity provides strong evidence for the CME-shock acceleration theory of SEPs. In addition, we found that electron and proton release time delays (DTs) relative to Type II radio bursts increase with connection angles. The average electron (proton) DT is ~14 (32) min for strongly anisotropic events and ~2.5 (4.4) hr for weakly anisotropic events. Poor magnetic connectivity and large scattering effects are two main reasons to cause large delays.

Xie, H.↗

Optimization of a Remote Sensing Energy Balance Method over Different Canopy Applied at Global Scale

Parameterization methods which calculate turbulent heat and water fluxes with thermal remote sensing data were evaluated in the revised remote sensing surface energy balance system (SEBS) model (Chen et al., 2013). The model calculates sensible heat (H) based on the Monin-Obukhov similarity theory (MOST) and determines latent heat (LE) as the residual of energy balance. We examined the uncertainties of H and LE in the SEBS model due to five key parameters at the local station point scale. Observations at 27 flux towers located in seven land cover types (needle-leaf forest, broad leaf forest, shrub, savanna, grassland, cropland, and sparsely vegetated land) and an artificial intelligence particle swarm optimization (PSO) algorithm was combined to calibrate the five parameters (leaf drag coefficient, leaf heat transfer coefficients, roughness length for soil, and two parameters for ground heat calculation) in the SEBS model. The root-mean-square error at the site scale was reduced by 9 W/sq.m for H, and 92 W/sq.m for LE, and their correlation coefficients were increased by 0.07 (H) and 0.11 (LE) after using the calibrated parameters. The updated model validation was further conducted globally for the remotely sensed evapotranspiration (ET) calculations. Overestimation of SEBS global ET was significantly improved by using the optimized values of the parameters. The results suggested PSO was able to consistently locate the global optimum of the SEBS model, and appears to be capable of solving the ET model optimization problem.

Chen, Xuelong↗

Evaluation and Validation of a High Spatial Resolution Satellite Soil Moisture Product over the Continental United States

The soil moisture (SM) data retrieved from the Soil Moisture Active and Passive (SMAP) satellite are available at a 9 km grid spacing since April 2015. This product can provide valuable information for research and applications in hydrology and other related fields. However, the resolution may be too coarse for applications at catchment or field scale. In this study, an established downscaling methodology, which had a major modification regarding its application on the SMAP 33 km domain, was implemented to develop a 1 km soil moisture product based on the SMAP 9 km data. The algorithm proposed here is based on the thermal inertia principle and developed by modeling the relationship between surface temperature difference and SM for different Normalized Difference Vegetation Index (NDVI) classes. The model functions were established and tuned using data from the NASA’s Land Information System (LIS) North America Land Data Assimilation System (NLDAS) and remotely sensed VISible/InfRared (VIS/IR) reflectance data from Long Term Data Record (LTDR) AVHRR (Advanced Very High Resolution Radiometer) for the growing season months of April-September 1981–2018. These were then implemented using the MODIS (Moderate Resolution Imaging Spectroradiometer) data over the Continental United States (CONUS) domain. Validation activities were carried out using in situ measurements distributed through the International Soil Moisture Network (ISMN). The validation results computed using the 1 km SM data showed that the R2, unbiased RMSE (root mean square error) and bias were improved relative to the 9 km SMAP product by 0.045, 0.018m3/m3 and 0.001m3/m3, respectively. The 1 km SM also exhibited a strong time-series autocorrelation. Further accuracy assessment analyses indicated that precipitation might contribute to the uncertainties in both the 9 km SMAP and 1 km downscaled SMAP SM products.

SMAP↗

Modelling climate change impacts on maize yields under low nitrogen input conditions in sub‐Saharan Africa

Smallholder farmers in sub‐Saharan Africa (SSA) currently grow rainfed maize with limited inputs including fertilizer. Climate change may exacerbate current production constraints. Crop models can help quantify the potential impact of climate change on maize yields, but a comprehensive multimodel assessment of simulation accuracy and uncertainty in these low‐input systems is currently lacking. We evaluated the impact of varying [CO2], temperature and rainfall conditions on maize yield, for different nitrogen (N) inputs (0, 80, 160 kg N/ha) for five environments in SSA, including cool subhumid Ethiopia, cool semi‐arid Rwanda, hot subhumid Ghana and hot semi‐arid Mali and Benin using an ensemble of 25 maize models. Models were calibrated with measured grain yield, plant biomass, plant N, leaf area index, harvest index and in‐season soil water content from 2‐year experiments in each country to assess their ability to simulate observed yield. Simulated responses to climate change factors were explored and compared between models. Calibrated models reproduced measured grain yield variations well with average relative root mean square error of 26%, although uncertainty in model prediction was substantial (CV = 28%). Model ensembles gave greater accuracy than any model taken at random. Nitrogen fertilization controlled the response to variations in [CO2], temperature and rainfall. Without N fertilizer input, maize (i) benefited less from an increase in atmospheric [CO2], (ii) was less affected by higher temperature or decreasing rainfall and (iii) was more affected by increased rainfall because N leaching was more critical. The model inter-comparison revealed that simulation of daily soil N supply and N leaching plays a crucial role in simulating climate change impacts for low-input systems. Climate change and N input interactions have strong implications for the design of robust adaptation practices across SSA, because the impact of climate change will be modified if farmers intensify maize production with more mineral fertilizer.

Crop simulation model↗