Search NASA⌕ Search

SEARCH · Search NASA

Results for “nuclear data validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Source Term Reduction for Advanced and Small Modular Boiling Water Reactors

The United States Department of Energy (US DOE) is currently supporting the development of various advanced and small modular reactor (SMR) designs. Several of these designs have commenced license application with the US Nuclear Regulatory Commission (US NRC). These reactors have improved safety features that may significantly reduce radiological source terms in the event of design and beyond-design basis accidents. Specifically, some reactors feature a smaller containment volume relative to the available fission product depositional surface area, which supports increased fission product retention in the containment vessel. Pressurized water reactors (PWR) and boiling water reactors (BWR) with this feature include the integral pressurized water reactor (iPWR) and the BWRX-300 design by General Electric. A prior research program supported by the US DOE quantified the source term reduction associated with light water iPWRs and developed iPWR-specific theoretical models for fission product deposition rates. This program included a sequence of research projects that started with a feasibility study, development of theoretical models that predict higher deposition rates, and finally, development of empirical data for verification and validation of the theoretical models. The current project, which is a feasibility study, is the first step in a similar program to quantify the source term reduction associated with small and advanced light water BWRs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Visualization of flow interaction in a channel flow produced by a pair of helically coiled rods

Helically coiled tubes have been considered in the design of steam generators or heat exchangers of next generation nuclear power plants. Its compactness, efficiency, and the capability to absorb thermal expansion are desirable for nuclear reactor designs. However, the complex flow generated by the helically coiled geometry can result in flow induced vibration (FIV). In order to predict the FIV, there have been efforts using Computational Fluid dynamics (CFD)4, 5 to be coupled with multi-mechanics simulations. However, it is required to validate CFD to have confidence in capturing the flow structure characteristics of the transient complex flow behavior and fluctuation. In the present study, a simplified helically coiled steam generator (HCSG) design experiment was built acquiring data for CFD validation purpose. It is not perfect representation of the multiple rods, however, the current test facility produced transient data of the flow interaction between the rods and flow fluctuations near the rods. Particle Image Velocimetry (PIV) was applied to visualize the turbulent flow in a channel with slant rods. The two dimensional turbulent flow fields were analyzed. The velocity components were defined as below. u = U + u' (1) v = V + v' (2) where u is the lateral velocity on x-axis, v is the vertical velocity on y-axis, U and V are the mean velocities, and u' and v' are the fluctuation. Reynolds number, Re, was calculated using the rod diameter, d = 15.9 mm, and the upstream approach velocity, V{sub 0} = 0.5 m/s. Re = V{sub 0} d/η (3) where η is the kinematic viscosity of water. The experiment was conducted at Re ≅ 9,000 considering the currently reasonable computing power. Flow visualization in a flow channel produced by helically coiled rods was performed using PIV. The mean velocity field and streamlines were presented in this paper. The vortical flow structures in the cavity between rods were observed. Because of the asymmetric geometry, the flow profile was skewed. Additional measurements and transient analysis will be conducted to produce benchmark data for FIV study using CFD. Also, a test facility with a 5-rod heat exchanger design is operating to produce more data as a further work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Towards Reliable Cross Sections for National Security Applications

Stockpile stewardship requires the description of weapons performance without resorting to underground nuclear testing. In the earlier tests, selected isotopes were used as detectors, and recovered after irradiation. Aspects of nuclear device performance were inferred by comparing the measured isotopic ratios to those predicted from simulations. The reaction flows that produce the final isotopic distributions proceed through regions of the nuclear chart that include unstable nuclei. Presently, improved nuclear data input is required to reanalyze prior tests and to certify the stockpile's reliability and safety. Many important cross sections are unknown, as is shown in the example of the Yttrium reaction network (Figure 1). The relevant reactions include (n,2n), (n,n'), (n,gamma), (n,p) and other charged-particle emitting reactions. The cross sections have to be calculated or inferred from indirect measurements. In both cases, reliable optical models that are valid a few nucleons away from stability are needed. The UNEDF Nuclear Reaction activities address this need by combining nuclear-structure input from UNEDF structure calculations with modern reaction theory and large-scale computational capabilities to develop microscopic nucleon-nucleus optical potentials that can be extrapolated to unstable nuclei. In addition, the reaction calculation tools and optical models developed in this context are proving valuable for planning and interpreting indirect (surrogate) measurements of the required cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Status of the framework for research in nuclear science and engineering - 25460

The Framework for Research in Nuclear Science and Engineering (FRENSIE) is a collection of packages written in C++ that are designed primarily to aid in methods development. New features are continually being added to the various packages and as a result, the Forward Adjoint Continuous Energy Monte Carlo (FACEMC) tool provided by FRENSIE continues to undergo verification and validation. While FRENSIE is not currently open source, the ultimate goal is for it to be released as such. A few of the more recent developments in FRENSIE include the addition of combinatorial geometry capabilities using ROOT, tet and hex meshing, support for thermal neutron S (α; β) data, photon Doppler broadening, electron interactions using basic analog electron physics models as well as an elastic moment-preserving model, and atomic relaxation. Preliminary verification results for much of the newly added physics models show good agreement between FACEMC and MCNP6. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of the Technical Basis of a Unified Viscoplastic Model of 316H Stainless Steel for Incorporation into ASME Division 5

This report describes the development of a unified viscoplastic model describing the deformation of 316 stainless steel. The model was developed for incorporation into Section III, Division 5 of the ASME Boiler and Pressure Vessel Code covering the design and fabrication of Class A high temperature nuclear reactor components. The current version of the Code does not provide reference inelastic models, leaving the responsibility of defining an adequate model up to either the plant owner or designer. This approach represents a substantial barrier to using the ASME design by inelastic analysis methods. As historical practice demonstrates these methods produce much more efficient designs, compared to the design by elastic analysis methods, eliminating this barrier could result in safer, more effective, and more efficient structural designs thereby lowering the cost of future advanced reactors. This report summarizes the process of gathering experimental data, calibrating the candidate inelastic model against that data, and validating the model. The report also summarizes work on a new method of calculating the sensitivities of history dependent nonlinear constitutive models that was used to calibrate the 316H model using gradient-based optimization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Experimental test plan for PWR sister rods in the high burnup spent fuel data project

The High Burnup Spent Fuel Data Project (herein referred to as the 'project'), sponsored by the US Department of Energy (DOE) Office of Nuclear Energy (NE), is focused on experimentally defining the effects of long-term storage and transportation on high burnup (HBU) pressurized water reactor (PWR) fuel (>45 gigawatt days per metric ton uranium). The goals of the project are to provide confirmatory data for model validation and potential improvement; to provide input to future dry storage cask design; to support license renewals and new licenses for Independent Spent Fuel Storage Installation facilities; and to support transportation licensing for high burnup used fuel. In support of these project goals, an instrumented TN-32B bolted-lid cask at the North Anna reactor site will be loaded with intact, HBU PWR fuel assemblies (project assemblies) having four different kinds of cladding: standard Zircaloy-4, low-tin Zircaloy-4, ZIRLO, and M5. In approximately 10 years, the instrumented cask will be opened for inspection and several fuel rods from the project assemblies will be characterized. To support the project goals, the project pulled 25 'sister rods', 9 from the project assemblies and 16 from similar HBU assemblies, for characterization. The 25 sister rods are all high burnup and cover the range of cladding alloys. The 25 sister rods were shipped to Oak Ridge National Laboratory (ORNL) in early 2016 for detailed nondestructive and destructive examination. Examinations are intended to provide baseline data on the initial physical state of the cladding and fuel prior to the loading, drying, and long-term dry storage process. Further examinations are focused on determining the effects of temperatures encountered during and following drying. Similar tests will be performed on rods taken from the project assemblies at the end of the storage period (the 'cask rods') to identify any significant changes in the fuel rods that may have occurred during the dry storage period. Additionally, some of the sister rods will be used for separate effects testing to expand the applicability of the project data to the fleet, and to address some of the data-related gaps associated with extended storage and subsequent transportation of high burnup fuel. A draft test plan is being developed that describes the experimental work to be conducted on the sister rods. This paper summarizes the draft test plan and necessary coordination activities for the multi-year experimental program to supply data relevant to the assessment of the safety of long-term storage followed by transportation of high burnup used fuel. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Interpretation of energy deposition data from historical operation of the transient test facility (TREAT)

The Transient Test Reactor (TREAT) at Idaho National Laboratory will resume operations in late 2017 after a 23 year hiatus while maintained in a cold standby state. Over that time period, computational power and simulation capabilities have increased substantially and now allow for new multiphysics modeling possibilities that were not practical or feasible for most of TREAT's operational history. Hence the return of TREAT to operational service provides a unique opportunity to apply state-of-the-art software and associated methods in the modeling and simulation of general three-dimensional steady state and kinetic behavior for reactor operation, and for coupling of the core power transient model to experiment simulations. However, measurements taken in previous operations were intended to predict power deposition in experimental samples, with little consideration of three-dimensional core power distributions. Hence, interpretation of data for the purpose of validation of modern methods can be challenging. For the research discussed herein, efforts are described for the process of proper interpretation of data from the most recent calibration experiments performed in the core, the M8 calibration series (M8-CAL). These measurements were taken between 1990 and 1993 using a set of fission wires and test fuel pins to estimate the power deposition that would be produced in fast reactor test fuel pins during the M8 experiment series. Because of the decision to place TREAT into a standby state in 1994, the M8 series of transients were never performed. However, potentially valuable information relevant for validation is available in the M8-CAL measurement data, if properly interpreted. This article describes the current state of the process of recovery of useful data from M8-CAL measurements and quantification of biases and uncertainties to potentially apply to the validation of multiphysics methods.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Online technique for detecting state of onboard fiber optic gyroscope

Although angle random walk (ARW) of fiber optic gyroscope (FOG) has been well modeled and identified before being integrated into the high-accuracy attitude control system of satellite, aging and unexpected failures can affect the performance of FOG after launch, resulting in the variation of ARW coefficient. Therefore, the ARW coefficient can be regarded as an indicator of “state of health” for FOG diagnosis in some sense. The Allan variance method can be used to estimate ARW coefficient of FOG, however, it requires a large amount of data to be stored. Moreover, the procedure of drawing slope lines for estimation is painful. To overcome the barriers, a weighted state-space model that directly models the ARW to obtain a nonlinear state-space model was established for FOG. Then, a neural extended-Kalman filter algorithm was implemented to estimate and track the variation of ARW in real time. The results of experiment show that the proposed approach is valid to detect the state of FOG. Moreover, the proposed technique effectively avoids the storage of data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Computational Fluid Dynamics Modeling of the Fuel Reactor in NETL's 50 kW th Chemical Looping Facility

The National Energy Technology Laboratory (NETL) has explored chemical looping in its 50 kW th facility using a number of oxygen carriers. In this work, the results for methane conversion in the fuel reactor with a hematite iron ore as the oxygen carrier are analyzed. The experimental results are compared to predictions using CPFD's barracuda computational fluid dynamics (CFD) code with kinetics derived from the analysis of fixed bed data. It has been found through analytical techniques from thermal gravimetric analysis data as well as the same fixed bed data that the kinetics for the methane–hematite reaction follows a nucleation and growth or Johnson–Mehl–Avrami (JMA) reaction mechanism. barracuda does not accept nucleation and growth kinetics; however, there is enough sufficient variability of the solids dependence within the software such that the nucleation and growth behavior can be mimicked. This paper presents the method to develop the pseudo-JMA kinetics for barracuda extracted from the fixed bed data and then applies these values to the fuel reactor data to compare the computational results to experimental data obtained from 50 kW th unit for validation. Lastly, a fuel reactor design for near complete conversion is proposed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Chemometrics and Experimental Design for the Quantification of Nitrate Salts in Nitric Acid: Near-Infrared Spectroscopy Absorption Analysis

Implementing remote, real-time spectroscopic monitoring of radiochemical processing streams in hot cell environments requires efficiency and simplicity. The success of optical spectroscopy for the quantification of species in chemical systems highly depends on representative training sets and suitable validation sets. Selecting a training set (i.e., calibration standards) to build multivariate regression models is both time- and resource-consuming using standard one-factor-at-a-time approaches. This study describes the use of experimental design to generate spectral training sets and a validation set for the quantification of sodium nitrate (0–1 M) and nitric acid (0.1–10 M) using the near-infrared water band centered at 1440 nm. Partial least squares regression models were built from training sets generated by both D- and I-optimal experimental designs and a one-factor-at-a-time approach. The prediction performance of each model was evaluated by comparing the bias and standard error of prediction for statistical significance. D- and I-optimal designs reduced the number of samples required to build regression models compared with one-factor-at-a-time while also improving performance. Models must be confirmed against a validation sample set when minimizing the number of samples in the training set. The D-optimal design performed the best when considering both performance and efficiency by improving predictive capability and reducing number of samples in the training set by 64% compared with the one-factor-at-a-time approach. The experimental design approach objectively selects calibration and validation spectral data sets based on statistical criterion to optimize performance and minimize resources.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Baseline process description for simulating plutonium oxide production for precalc project

Savannah River National Laboratory (SRNL) started a multi-year project, the PreCalc Project, to develop a computational simulation of a plutonium oxide (PuO 2 ) production facility with the objective to study the fundamental relationships between morphological and physicochemical properties. This report provides a detailed baseline process description to be used by SRNL personnel and collaborators to facilitate the initial design and construction of the simulation. The PreCalc Project team selected the HB-Line Plutonium Finishing Facility as the basis for a nominal baseline process since the facility is operational and significant model validation data can be obtained. The process boundary as well as process and facility design details necessary for multi-scale, multi-physics models are provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Comparison of Monte-Carlo Simulations and Data from MicroBooNE

This note presents a first comparison of data and Monte-Carlo (MC) simulation at the MicroBooNE experiment, a surface-level liquid argon time projection chamber (LArTPC) located in the Booster Neutrino Beam (BNB) at Fermi National Accelerator Laboratory. Before any analysis can be validated, it is important to ensure understanding of both the performance of the detector and the reconstruction algorithms. Comparing data with simulation can contribute to this effort.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Molecular Tagging Velocimetry Development for In-situ Measurement in High-Temperature Test Facility

The High Temperature Test Facility, HTTF, at Oregon State University (OSU) is an integral-effect test facility designed to model the behavior of a Very High Temperature Gas Reactor (VHTR) during a Depressurized Conduction Cooldown (DCC) event. It also has the ability to conduct limited investigations into the progression of a Pressurized Conduction Cooldown (PCC) event in addition to phenomena occurring during normal operations. Both of these phenomena will be studied with in-situ velocity field measurements. Experimental measurements of velocity are critical to provide proper boundary conditions to validate CFD codes, as well as developing correlations for system level codes, such as RELAP5 (http://www4vip.inl.gov/relap5/). Such data will be the first acquired in the HTTF and will introduce a diagnostic with numerous other applications to the field of nuclear thermal hydraulics. A laser-based optical diagnostic under development at The George Washington University (GWU) is presented; the technique is demonstrated with velocity data obtained in ambient temperature air, and adaptation to high-pressure, high-temperature flow is discussed.

Andre, Matthieu A.↗

ELECTRONICS UPGRADE TO THE SAVANNAH RIVER NATIONAL LABORATORY COULOMETER FOR PLUTONIUM AND NEPTUNIUM ASSAY

The Savannah River Site (SRS) has the analytical measurement capability to perform high-precision plutonium concentration measurements by controlled-potential coulometry. State-of-the-art controlled-potential coulometers were designed and fabricated by the Savannah River National Laboratory and installed in the Analytical Laboratories process control laboratory. The Analytical Laboratories uses coulometry for routine accountability measurements of and for verification of standard preparations used to calibrate other plutonium measurement systems routinely applied to process control, nuclear safety, and other accountability applications. The SRNL Coulometer has a demonstrated measurement reliability of {approx}0.05% for 10 mg samples. The system has also been applied to the characterization of neptunium standard solutions with a comparable reliability. The SRNL coulometer features: a patented current integration system; continuous electrical calibration versus Faraday's Constants and Ohm's Law; the control-potential adjustment technique for enhanced application of the Nernst Equation; a wide operating room temperature range; and a fully automated instrument control and data acquisition capability. Systems have been supplied to the International Atomic Energy Agency (IAEA), Russia, Japanese Atomic Energy Agency (JAEA) and the New Brunswick Laboratory (NBL). The most recent vintage of electronics was based on early 1990's integrated circuits. Many of the components are no longer available. At the request of the IAEA and the Department of State, SRNL has completed an electronics upgrade of their controlled-potential coulometer design. Three systems have built with the new design, one for the IAEA which was installed at SAL in May 2011, one system for Los Alamos National Laboratory, (LANL) and one for the SRS Analytical Laboratory. The LANL and SRS systems are undergoing startup testing with installation scheduled for this summer.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Assessment of current atomic scale modelling methods for the investigation of nuclear fuels under irradiation: Example of uranium dioxide

Multiscale approaches are developed to build more physically based kinetic and mechanical mesoscale models to enhance the predictive capability of fuel performance codes and increase the efficiency of the development of the safer and more innovative nuclear materials needed in the future. Atomic scale methods, and in particular electronic structure and empirical potential methods, form the basis of this multiscale approach. It is therefore essential to know the accuracy of the results computed at this scale if we want to feed them into higher scale models. We focus here on the assessment of the description of interatomic interactions in uranium dioxide using on the one hand electronic structure methods, in particular in the density functional theory (DFT) framework and on the other hand empirical potential methods. These two types of methods are complementary, the former enabling to get results from a minimal amount of input data and further insight into the electronic and magnetic properties, while the latter are irreplaceable for studies where a large number of atoms needs to be considered. We consider basic properties as well as specific ones, which are important for the description of nuclear fuel under irradiation. These are especially energies, which are the main data passed to higher scale models. We limit ourselves to uranium dioxide.

multiscale modeling↗

Evaluation of Oak Ridge National Laboratory Health Physics Research Reactor Operation Data for Criticality Accident Alarm System Benchmark Creation

Over the last few decades, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Working Group has focused on gathering critical and subcritical benchmark experiment data from different facilities around the world for inclusion in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook). The compiled data can be used by criticality safety analysts to help validate their calculation tools and cross-section libraries for a variety of applications.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

TMS 2023 - Methodology and Density of PuCl3-NaCl Mixtures

The development of molten salt reactors and their associated components demands reliable and accurate thermophysical property data for design and validation. A candidate fuel salt, PuCl3-NaCl (36 mol% PuCl3) has been synthesized and studied at the Idaho National Laboratory. This study has determined the density of PuCl3-NaCl at multiple compositions and temperatures, providing data for validation of modeling efforts and making improvements on the buoyancy method for density measurements of actinide-bearing molten salts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗