Search NASA⌕ Search

SEARCH · Search NASA

Results for “optimizer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Optimal control system design of an acid gas removal unit for an IGCC power plants with CO2 capture

Future IGCC plants with CO{sub 2} capture should be operated optimally in the face of disturbances without violating operational and environmental constraints. To achieve this goal, a systematic approach is taken in this work to design the control system of a selective, dual-stage Selexol-based acid gas removal (AGR) unit for a commercial-scale integrated gasification combined cycle (IGCC) power plant with pre-combustion CO{sub 2} capture. The control system design is performed in two stages with the objective of minimizing the auxiliary power while satisfying operational and environmental constraints in the presence of measured and unmeasured disturbances. In the first stage of the control system design, a top-down analysis is used to analyze degrees of freedom, define an operational objective, identify important disturbances and operational/environmental constraints, and select the control variables. With the degrees of freedom, the process is optimized with relation to the operational objective at nominal operation as well as under the disturbances identified. Operational and environmental constraints active at all operations are chosen as control variables. From the results of the optimization studies, self-optimizing control variables are identified for further examination. Several methods are explored in this work for the selection of these self-optimizing control variables. Modifications made to the existing methods will be discussed in this presentation. Due to the very large number of candidate sets available for control variables and due to the complexity of the underlying optimization problem, solution of this problem is computationally expensive. For reducing the computation time, parallel computing is performed using the Distributed Computing Server (DCS®) and the Parallel Computing® toolbox from Mathworks®. The second stage is a bottom-up design of the control layers used for the operation of the process. First, the regulatory control layer is designed followed by the supervisory control layer. Finally, an optimization layer is designed. In this paper, the proposed two-stage control system design approach is applied to the AGR unit for an IGCC power plant with CO{sub 2} capture. Aspen Plus Dynamics® is used to develop the dynamic AGR process model while MATLAB is used to perform the control system design and for implementation of model predictive control (MPC).

97 MATHEMATICS AND COMPUTING↗

Integrated controls design optimization

A control system (207) for optimizing a chemical looping process of a power plant includes an optimizer (420), an income algorithm (230) and a cost algorithm (225) and a chemical looping process models. The process models are used to predict the process outputs from process input variables. Some of the process in puts and output variables are related to the income of the plant; and some others are related to the cost of the plant operations. The income algorithm (230) provides an income input to the optimizer (420) based on a plurality of input parameters (215) of the power plant. The cost algorithm (225) provides a cost input to the optimizer (420) based on a plurality of output parameters (220) of the power plant. The optimizer (420) determines an optimized operating parameter solution based on at least one of the income input and the cost input, and supplies the optimized operating parameter solution to the power plant.

97 MATHEMATICS AND COMPUTING↗

Optimization study of B4C filter thickness for shifting to fast spectrum at experimental position in NRAD core

The Japan Atomic Energy Agency (JAEA) has investigated an accelerator-driven system (ADS) to transmute minor actinides (MAs) partitioned from the high level waste. In the nuclear transmutation system such as the ADS, the nuclear data validation of MA is required to reduce the uncertainty caused by the nuclear data of MA. In order to validate the nuclear data, many independent experimental data need to be mutually compared. The Idaho National Laboratory (INL) considers the measurement of fission rate ratio and sample worth with a wide spectral indices by inserting several types of thermal neutron shielding filters in the experimental position in Neutron RADiography (NRAD) which is the thermal neutron reactor. The JAEA has a plan to perform integral experiments with fission chambers in the NRAD because of the expansion of the experimental data contributing to nuclear data validation of MA. In this study, the optimization of the NRAD core configuration, the B4C filter thickness, and the experimental position design was conducted to acquire the high-accuracy and the beneficial experimental data by using MCNP 6.1 and ENDF/B-VII.1. First, by locating the experimental position as close to the center of the core as possible and concentrating the fuel around that position, the neutron flux of the optimized model could be constructed 2.5 times as much as that of the previous model. Second, the optimized B4C filter thickness was determined to be 3mm based on the comprehensive evaluation from the viewpoints of the shielding ability of low energy neutrons, the level of the total neutron flux, and the influence of fabrication accuracy of the B4C filter. Third, we constructed the experimental position model that could further reduce the influence of the low energy neutrons by adopting the aluminum dry box and the bottom filter. Moreover, the neutron energy spectrum of the tentative optimized model constructed by following the above results was compared with that of the fast neutron reactors such as the ADS and the Fast Critical Assembly (FCA). As a result, the tentative optimized model would be able to be obtained the beneficial experimental data for the verification of FCA-IX series data and the validation of MA nuclear data for accuracy improvement of ADS design. Furthermore, the adoption of the tentative optimized model would be acquired the experimental data such as fission reaction rate and sample worth with the wider spectral indices than the previous one because the tentative optimized model would be able to increase the ratio of the fast neutrons by almost completely eliminating the effect of the thermal neutrons.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental Validation of Approximate Dynamic Programming Based Optimization and Convergence on Microgrid Applications

Stochastic optimization can better address uncertainties in power system problems. However, when state space and action space become large, many existing approaches become computationally expensive and even infeasible. Approximate dynamic programming (ADP) attracts researchers’ attention as a powerful tool for solving power system optimization problems with reduced computational cost. In this paper, in light of the existing literature, we investigate how the ADP approach with post-decision value function approximation converges to the nearly optimal solution with improved computational speed and experimentally validate the performance of the approach for a microgrid energy optimization problem. The approximation error versus the number of iteration is studied for convergence analysis of the post-decision ADP. A flowchart is provided to illustrate the proposed ADP algorithm for a microgrid energy optimization problem. The performance of ADP and dynamic programming (DP) is compared in terms of optimization error and computational time. It has found that the post-decision ADP approach can achieve competitive optimality with improved computational speed compared to the traditional DP.

Das, Avijit↗

Do optimization methods in deep learning applications matter?

With advances in deep learning, exponential data growth and increasing model complexity, developing efficient optimization methods are attracting much research attention. Several implementations favor the use of Conjugate Gradient (CG) and Stochastic Gradient Descent (SGD) as being practical and elegant solutions to achieve quick convergence, however, these optimization processes also present many limitations in learning across deep learning applications. Recent research is exploring higher-order optimization functions as better approaches, but these present very complex computational challenges for practical use. Comparing first and higher-order optimization functions, in this paper, our experiments reveal that Levemberg-Marquardt (LM) significantly supersedes optimal convergence but suffers from very large processing time increasing the training complexity of both, classification and reinforcement learning problems. Our experiments compare off-the-shelf optimization functions(CG, SGD, LM and L-BFGS) in standard CIFAR, MNIST, CartPole and FlappyBird experiments.The paper presents arguments on which optimization functions to use and further, which functions would benefit from parallelization efforts to improve pretraining time and learning rate convergence.

Ozyildirim, Buse Melis↗

Heat Exchangers Circuitry Optimization using Low-GWP Refrigerants in Reversible Heat Pump Applications

Tube-fin heat exchangers (TFHX) are widely used in heat pump applications. Circuitry optimization can improve system performance. Previous optimizations focus on improving component-level performance under a specific operating condition, i.e., the TFHX either works as a condenser or an evaporator. The optimal circuitry obtained under air conditioning (AC) mode cannot guarantee optimal performance when used in heat pump (HP) mode. This study implements a bi-objective formulation to achieve optimal system performance in both AC and HP modes. An integer permutation-based Genetic Algorithm is integrated with Heat Pump Design Model (HPDM) to perform heat pump optimization. Six refrigerants, i.e., R410A, R452B, R454B, R32, D2Y60 and L41a are investigated. Case studies show that optimal heat exchangers yield 2.1%-6.1% EER improvement under AC mode and 1.9%-8.5% COP improvement under HP mode. Use of this design approach can help assure a preferable performance of reversible heat pumps during both cooling and heating mode usage.

Li, Zhenning↗

...And Eat it Too: High Read Performance in Write-Optimized HPC I/O Middleware File Formats

As HPC applications run on increasingly high process counts on larger and larger machines, both the frequency of checkpoints needed for fault tolerance and the resolution and size of Data Analysis Dumps are expected to increase proportionally. In order to maintain an acceptable ratio of time spent performing useful computation work to time spent performing I/O, write bandwidth to the underlying storage system must increase proportionally to this increase in the checkpoint and computation size. Unfortunately, popular scientific self-describing file formats such as netCDF and HDF5 are designed with a focus on portability and flexibility. Extra care and careful crafting of the output structure and API calls is required to optimize for write performance using these APIs. To provide sufficient write bandwidth to continue to support the demands of scientific applications, the HPC community has developed a number of I/O middleware layers, that structure output into write-optimized file formats. However, the obvious concern with any write optimized file format would be a corresponding penalty on reads. In the log-structured filesystem, for example, a file generated by random writes could be written efficiently, but reading the file back sequentially later would result in very poor performance. Simulation results require efficient read-back for visualization and analytics, and though most checkpoint files are never used, the efficiency of a restart is very important in the face of inevitable failures. The utility of write speed improving middleware would be greatly diminished if it sacrificed acceptable read performance. In this paper we examine the read performance of two write-optimized middleware layers on large parallel machines and compare it to reading data natively in popular file formats. The two I/O middleware layer examined in this paper are the Adaptable IO System (ADIOS), a library-based approach developed at Oak Ridge National Laboratory to provide a high-level IO API that can be used in place of netCDF or HDF5 to do much more aggressive write-behind and efficient reordering of data locations within the file; and the Parallel Log-structured Filesystem (PLFS), a stackable FUSE filesystem approach developed at Los Alamos National Laboratory that decouples concurrent writes to improve the speed of checkpoints. Since ADIOS is an I/O componentization that affords selection of different I/O methods at or during runtime, through a single API, users can have access to MPI-IO, Posix-IO, HDF5, netCDF, and staging methods. The ADIOS BP file format is a new log-file format that has a superset of the features of both HDF5 and netCDF, but is designed to be portable and flexible while being optimized for writing. PLFS, on the other hand, is mounted as a stackable filesystem on top of an existing parallel filesystem. Reads or writes to the PLFS filesystem are transparently translated into operations on per-process log files stored in the underlying parallel filesystem. Since PLFS performs this translation without application modification, users can write in HDF5, netCDF, or app-specific file formats and PLFS will store the writes in a set of efficiently written log-formatted files, while presenting the user with a logical 'flat' file on reads. Despite their different approaches, the commonality behind both of these middleware systems is that they both write to a log file format. As shown in previous publications, writes are fully optimized in both systems, sometimes resulting in 100x improvements over writing data in popular file formats. But as mentioned above, writing is only one part of the story. In this paper we examine the read performance of our middleware layers on large parallel machines and compare these to reading data either natively or from other popular file formats. We compare the reading performance in two different scenarios: (1) Reading back restarts from the same number of processors as wrote the data and (2) Reading back restart data from a different number of processors. We observe that not only can write-optimized I/O middleware be built to not penalize read speeds, but for important workloads, techniques that improve write performance can, perhaps counterintuitively, improve read speeds over reading from a contiguously organized file format. In the remainder of this paper, we investigate this further through case studies of PLFS and ADIOS on simulation checkpoint restarts.

99 GENERAL AND MISCELLANEOUS↗

Hydropower Optimization Using Artificial Neural Network Surrogate Models of a High-Fidelity Hydrodynamics and Water Quality Model

Hydropower operations optimization subject to environmental constraints is limited by challenges associated with dimensionality and spatial and temporal resolution. The need for high-fidelity hydrodynamic and water quality models within optimization schemes is driven by improved computational capabilities, increased requirements to meet specific points of compliance with greater resolution, and the need to optimize operations of not just single reservoirs but systems of reservoirs. This study describes an important advancement for computing hourly power generation schemes for a hydropower reservoir using high-fidelity models, surrogate modeling techniques, and optimization methods. The predictive power of the high-fidelity hydrodynamic and water quality model CE-QUAL-W2 is successfully emulated by an artificial neural network, then integrated into a genetic algorithm optimization approach to maximize hydropower generation subject to constraints on dam operations and water quality. This methodology is applied to a multipurpose reservoir near Nashville, Tennessee, USA. The model successfully reproduced high-fidelity reservoir information while enabling 6.8% and 6.6% increases in hydropower production value relative to actual operations for dissolved oxygen (DO) limits of 5 and 6 mg/L, respectively, while witnessing an expected decrease in power generation at more restrictive DO constraints. Exploration of simultaneous temperature and DO constraints revealed capability to address multiple water quality constraints at specified locations. Here, the reduced computational requirements of the new modeling approach demonstrated an ability to provide decision support for reservoir operations scheduling while maintaining high-fidelity hydrodynamic and water quality information as part of the optimization decision support routines.

13 HYDRO ENERGY↗

A Scalable Interior‐Point Gauss–Newton Method for PDE‐Constrained Optimization With Bound Constraints

Here, we present a scalable approach to solve a class of partial differential equation (PDE)‐constrained optimization problems with bound constraints. This approach utilizes a robust full‐space interior‐point (IP)‐Gauss–Newton optimization method. To cope with the poorly‐conditioned IP‐Gauss–Newton saddle‐point linear systems that need to be solved approximately, once per optimization step, we propose two spectrally related preconditioners. These preconditioners leverage the limited informativeness of data in regularized PDE‐constrained optimization problems. A block Gauss–Seidel preconditioner is proposed for the GMRES‐based solution of the IP‐Gauss–Newton linear systems. It is shown, for a large‐class of PDE‐ and bound‐constrained optimization problems, that the spectrum of the block Gauss–Seidel preconditioned IP‐Gauss–Newton matrix is asymptotically independent of discretization and is not impacted by the ill‐conditioning that notoriously plagues interior‐point methods. We exploit symmetry of the IP‐Gauss–Newton linear systems and propose a regularization and log‐barrier Hessian preconditioner for the preconditioned conjugate gradient (PCG)‐based solution of the equivalent IP‐Gauss–Newton–Schur complement linear systems. The eigenvalues of the block Gauss–Seidel preconditioned IP‐Gauss–Newton matrix, that are not equal to one, are identical to the eigenvalues of the regularization and log‐barrier Hessian preconditioned Schur complement matrix. The scalability of the approach is demonstrated on two example problems. The numerical solution of these optimization problems is shown to require a discretization independent number of IP‐Gauss–Newton linear solves. Furthermore, the linear systems are solved in a discretization and IP ill‐conditioning independent number of preconditioned Krylov subspace iterations. The parallel scalability of the preconditioner, achieved via algebraic multigrid component solvers when applicable, and the aforementioned algorithmic scalability permits a parallel scalable means to compute solutions of a large class of PDE‐ and bound‐constrained problems.

PDE-constrained optimization↗

The use of multi-objective optimization to improve the design process of nuclear power plant systems

Multi-objective optimization is proposed to address the problem of design optimality in the nuclear power plant design process. This is done via the creation/development of the Optimization and Preference Tool for the Improvement of Nuclear Systems (OPTIONS). This work details applications of multi-objective optimization methods (in Python 3) to two different nuclear system design problems: the flash-Rankine power conversion system (PCS) of the I 2 S-LWR and the Passive Endothermic Reaction Cooling System (PERCS) attached to a standard PWR primary system (in RELAP5). The PCS design problem is first solved for three configurations using a specific particle swarm optimization method, achieving a thermodynamic efficiency of 34.81%. A new method, the Mixed-Integer Non-dominated Sorting Genetic Algorithm (MI-NSGA), is created and then used, solving a PCS superstructure of 22 configurations and achieving an efficiency of 35.63%. Finally, the OPTIONS tool is used to optimize the PERCS, improving cost, core temperature control, and cooling longevity.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Simultaneous shape and topology optimization of inflatable soft robots

Simultaneous shape and topology optimization is used to design pressure-activated inflatable soft robots. The pressure loaded boundary is meshed conformingly and shape optimized, while the morphology of the robot is topology optimized. The design objective is to exert maximum force on an object, i.e. to produce soft “grippers”. The robot’s motion is modeled using nearly incompressible finite deformation hyperelasticity. To ensure stability of the robot, the buckling load factors obtained via linearized buckling analyses are constrained. The finite element method is used to evaluate the optimization cost and constraint functions and the adjoint method is employed to compute their sensitivities. The numerical examples produce pressure-driven soft robots with varying complexity. We also compare our simultaneous optimization results to those obtained via sequential topology and then shape optimization.

42 ENGINEERING↗

Pseudo-spectral control of a novel oscillating surge wave energy converter in regular waves for power optimization including load reduction

The aim of this study is to describe a procedure to maximize the power-to-load ratio of a novel wave energy converter (WEC) that combines an oscillating surge wave energy converter with variable structural components. The control of the power-take-off torque will be on a wave-to-wave timescale, whereas the structure will be controlled statically such that the geometry remains the same throughout the wave period. Linear hydrodynamic theory is used to calculate the upper and lower bounds for the time-averaged absorbed power and surge foundation loads while assuming that the WEC motion remains sinusoidal. Previous work using pseudo-spectral techniques to solve the optimal control problem focused solely on maximizing absorbed energy. This work extends the optimal control problem to include a measure of the surge foundation force in the optimization. The objective function includes two competing terms that force the optimizer to maximize power capture while minimizing structural loads. A penalty weight was included with the surge foundation force that allows control of the optimizer performance based on whether emphasis should be placed on power absorption or load shedding. Results from pseudo-spectral optimal control indicate that a unit reduction in time-averaged power can be accompanied by a greater reduction in surge-foundation force.

16 TIDAL AND WAVE POWER↗

Statistical Multiobjective Optimization of Thiospinel CoNi 2 S 4 Nanocrystal Synthesis via Design of Experiments

Thiospinels, such as CoNi 2 S 4 , are showing promise for numerous applications, including as catalysts for the hydrogen evolution reaction, hydrodesulfurization, and oxygen evolution and reduction reactions; however, CoNi 2 S 4 has not been synthesized as small, colloidal nanocrystals with high surface-area-to-volume ratios. Traditional optimization methods to control nanocrystal attributes such as size typically rely upon one variable at a time (OVAT) methods that are not only time and labor intensive but also lack the ability to identify higher-order interactions between experimental variables that affect target outcomes. Herein, we demonstrate that a statistical design of experiments (DoE) approach can optimize the synthesis of CoNi 2 S 4 nanocrystals, allowing for control over the responses of nanocrystal size, size distribution, and isolated yield. After implementing a 2 5–2 fractional factorial design, the statistical screening of five different experimental variables identified temperature, Co:Ni precursor ratio, Co:thiol ratio, and their higher-order interactions as the most critical factors in influencing the aforementioned responses. Second-order design with a Doehlert matrix yielded polynomial functions used to predict the reaction parameters needed to individually optimize all three responses. A multiobjective optimization, allowing for the simultaneous optimization of size, size distribution, and isolated yield, predicted the synthetic conditions needed to achieve a minimum nanocrystal size of 6.1 nm, a minimum polydispersity (σ/$\bar{d}$) of 10%, and a maximum isolated yield of 99%, with a desirability of 96%. The resulting model was experimentally verified by performing reactions under the specified conditions. Furthermore, our work illustrates the advantage of multivariate experimental design as a powerful tool for accelerating control and optimization in nanocrystal syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient wind farm layout optimization with the FLOWERS AEP model and analytic gradients

Wind farm layout optimization (WFLO) studies often aim to maximize the annual energy production (AEP) of a wind farm by choosing an arrangement of turbines that minimizes wake interactions. One way to reduce the cost of WFLO studies is by using more computationally efficient AEP models. The cost of standard AEP modeling approaches, based on the numerical integration of low-fidelity engineering wake models, scales poorly with the number of simulated discrete wind conditions. A second way to reduce cost when using a gradient-based algorithm is to supply exact gradient information instead of finite-difference estimates. However, analytical functions for the derivatives of AEP with respect to turbine positions are not always available in the conventional modeling approach. FLOWERS is a computationally inexpensive, analytical model for wind farm AEP that is specifically developed for WFLO applications. In this paper, we analyze the performance of the FLOWERS AEP model with analytic gradients in a layout optimization study compared with a reference optimization framework across three wind farm case studies. We find that the FLOWERS-based approach reduces computation time by a factor of 50–4000 and improves optimal AEP by about 0.3% with less than half of the variability in AEP across instances with randomized initial conditions. We also find the optimal layouts to be insensitive to model parameter tuning, making FLOWERS-based layout optimization a streamlined, user-friendly approach.

17 WIND ENERGY↗

A non-intrusive parallel-in-time approach for simultaneous optimization with unsteady PDEs

This paper presents a non-intrusive framework for integrating existing unsteady partial differential equation (PDE) solvers into a parallel-in-time simultaneous optimization algorithm. The time-parallelization is provided by the non-intrusive software library XBraid [Parallel multigrid in time, software available at http://llnl.gov/casc/xbraid], which applies an iterative multigrid reduction technique to the time domain of existing time-marching schemes for solving unsteady PDEs. Its general user-interface has been extended in [S. Günther, N.R. Gauger, and J.B. Schroder, A non-intrusive parallel-in-time adjoint solver with the XBraid library, Comput. Vis. Sci. 19 (2018), pp. 85–95. Available at arXiv, math.OC/1705.00663] for computing adjoint sensitivities such that gradients of output quantities with respect to design changes can be computed parallel-in-time alongside with the primal PDE solution. In this paper, the primal and adjoint XBraid iterations are embedded into a simultaneous optimization framework, namely the One-shot method. In this method, design updates towards optimality are employed after each state and adjoint update such that optimality and feasibility of the design and the PDE solution are reached simultaneously. Finally, the time-parallel optimization method is validated on an advection-dominated flow control problem which shows significant speedup over a classical time-serial optimization algorithm.

97 MATHEMATICS AND COMPUTING↗

Comparing, optimizing, and benchmarking quantum-control algorithms in a unifying programming framework

For paving the way to novel applications in quantum simulation, computation, and technology, increasingly large quantum systems have to be steered with high precision. It is a typical task amenable to numerical optimal control to turn the time course of pulses, i.e., piecewise constant control amplitudes, iteratively into an optimized shape. Here, we present a comparative study of optimal-control algorithms for a wide range of finite-dimensional applications. We focus on the most commonly used algorithms: GRAPE methods which update all controls concurrently, and Krotov-type methods which do so sequentially. Guidelines for their use are given and open research questions are pointed out. Moreover, we introduce a unifying algorithmic framework, DYNAMO (dynamic optimization platform), designed to provide the quantum-technology community with a convenient matlab-based tool set for optimal control. In addition, it gives researchers in optimal-control techniques a framework for benchmarking and comparing newly proposed algorithms with the state of the art. It allows a mix-and-match approach with various types of gradients, update and step-size methods as well as subspace choices. Open-source code including examples is made available at http://qlib.info.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Biased degenerate ground-state sampling of small Ising models with converged quantum approximate optimization algorithm

The quantum alternating operator ansatz, a generalization of the quantum approximate optimization algorithm (QAOA), is a quantum algorithm used for approximately solving combinatorial optimization problems. QAOA typically uses the transverse field mixer as the driving Hamiltonian. One of the interesting properties of the transverse field driving Hamiltonian is that it results in nonuniform sampling of degenerate ground states of optimization problems. In this study, we numerically examine the fair sampling properties of the transverse field mixer QAOA, and Grover mixer QAOA (GM-QAOA), which provides theoretical guarantees of fair sampling of degenerate optimal solutions, up to a large enough p such that the mean expectation value converges to an optimal approximation ratio of 1. This comparison is performed with high-quality heuristically computed, but not necessarily optimal, QAOA angles, which give strictly monotonically improving solution quality as p increases. These angles are computed using the Julia based numerical simulation software JuliQAOA. Fair sampling of degenerate ground states is quantified using the Shannon entropy of the ground-state amplitudes distribution. The fair sampling properties are reported on several quantum signature Hamiltonians from previous quantum annealing fair sampling studies. Small random fully connected spin glasses are shown, which exhibit exponential suppression of some degenerate ground states with transverse field mixer QAOA. The transverse field mixer QAOA simulations show that some problem instances clearly saturate the Shannon entropy of 0 with a maximally biased distribution that occurs when the learning converges to an approximation ratio of 1 while other problem instances never deviate from a maximum Shannon entropy (uniform distribution) at any p step. Published by the American Physical Society 2025

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bucket Loading Trajectory Optimization for the Automated Wheel Loader

The bucket motion of a wheel loader during the loading process is investigated in this study. The optimal bucket loading trajectory can be obtained by solving an optimal control problem with the performance criteria of the fill factor , fuel efficiency and operation cycle time . A control-oriented model for the bucket loading operation is developed. Based on the control-oriented model, the bucket loading process is formulated as an optimal control problem with physical constraints. An open-source optimization solver, OpenOCL, is used to solve this problem. The simulation results show that the proposed method is effective in generating the optimal trajectory with significantly increased energy efficiency and productivity. Furthermore, this optimal trajectory can be employed as a reference for an automated wheel loader or as a driver advisory for a human operated wheel loader.

42 ENGINEERING↗