Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Modeling of Nonlocal Electron Conduction for Inertial Confinement Fusion

In this report Chenhall presents a new Monte Carlo (MC) transport method developed as part of his PhD thesis work funded via fellowship by Sandia National Laboratories. The model is used to simulate the electron thermal transport within inertial confinement fusion (ICF) type problems. The new model aims to improve upon the currently used implicit Schurtz, Nicolai, and Busquet (iSNB) method, in particular by using finite particle ranges in comparison to the exponential solution of a diffusion method and by improved higher order angular modeling. The new method is being developed using the 1D LILAC and 2D DRACO codes developed by the Rochester Laboratory for Laser Energetics. The model is compared to iSNB for several ICF type problems: Omega shot 60303 a shock timing experiment, Omega shot 68951 a cryo target implosion and a NIF phase plate polar direct drive design. Overall, the MC method performs at least as well as the iSNB method and appears to indicate a lower predicted preheat ahead of the shock fronts. However, the difference in overall results between iSNB and MC transport is small for the choice of test problems and further simulations will need to be run to fully understand the difference between the models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A gradient-based deep neural network model for simulating multiphase flow in porous media

We report simulation of multiphase flow in porous media is crucial for the effective management of subsurface energy and environment-related activities. The numerical simulators used for modeling such processes rely on spatial and temporal discretization of the governing mass and energy balance partial-differential equations (PDEs) into algebraic systems via finite-difference/volume/element methods. These simulators usually require dedicated software development and maintenance, and suffer low efficiency from a runtime and memory standpoint for problems with multi-scale heterogeneity, coupled-physics processes or fluids with complex phase behavior. Therefore, developing cost-effective, data-driven models can become a practical choice, and in this work, we choose deep learning approaches as they can handle high dimensional data and accurately predict state variables with strong nonlinearity. In this paper, we describe a gradient-based deep neural network (GDNN) constrained by the physics related to multiphase flow in porous media. We tackle the nonlinearity of flow in porous media induced by rock heterogeneity, fluid properties, and fluid-rock interactions by decomposing the nonlinear PDEs into a dictionary of elementary differential operators. We use a combination of operators to handle rock spatial heterogeneity and fluid flow by advection. Since the augmented differential operators are inherently related to the physics of fluid flow, we treat them as first principles prior knowledge to regularize the GDNN training. We use the example of pressure management at geologic CO 2 storage sites, where CO 2 is injected in saline aquifers and brine is produced, and apply GDNN to construct a predictive model that is trained with physics-based simulation data and emulates the physics process. We demonstrate that GDNN can effectively predict the nonlinear patterns of subsurface responses, including the temporal and spatial evolution of the pressure and saturation plumes. We also successfully extend the GDNN to convolutional neural network (CNN), namely gradient-based CNN (GCNN), and validate its capability to improve the prediction accuracy. GDNN has great potential to tackle challenging problems that are governed by highly nonlinear physics and enable the development of data-driven models with higher fidelity.

42 ENGINEERING↗

Laser refractive tomography of phase objects

The principles are outlined of laser refractive tomography - a method for reconstructing the values of the refractive index in the cross sections of phase objects, which involves the use of three-dimensional refractive images (3D refractograms) of structured laser radiation. A simulation algorithm is realised and examples are provided of characteristic 3D refractograms obtained by solving the direct problem of refraction of structured radiation. A method was developed for reconstructing the values of refractive index under conditions of strong refraction, which is based on the visualisation of ray trajectories inside an optically inhomogeneous medium. A classification is made of possible approaches to the solution of the inverse problem of refraction based on the visualisation of ray trajectories. Examples are given of cross section reconstruction and quantitative diagnostics of phase objects. (laser imaging)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Amplified charge and discharge rates in phase change materials for energy storage using spatially-enhanced thermal conductivity

Composites made with high thermal conductivity meshes embedded in phase change materials (PCMs) increase charge/discharge rates of latent heat energy storage systems. Here we study the benefits of spatially-dependent enhancements to thermal conductivity on the charge/discharge rates of PCMs in both one-dimensional Cartesian and one-dimensional cylindrical coordinates. Our nondimensionalized quasi-steady (Stefan number ≲ 0.1) solution indicates that the average charge (discharge) rate in a spatially-enhanced PCM outperforms the uniformly-enhanced case by maximizing the enhancement near the heat source and therein reducing the time averaged thermal resistance to melting (solidifying). Relative to a uniformly-enhanced thermal conductivity, the optimal charge/discharge rate enhancement is a modest 12% in one-dimensional Cartesian coordinates but as high as 140% in one-dimensional cylindrical coordinates. Our analytical solutions are a design guide for graded mesh structures that can be realized by advanced fabrication techniques such as additive manufacturing and applied in applications ranging from telecommunications to buildings, where PCMs are employed to harness rapidly varying energy sources.

25 ENERGY STORAGE↗

Feedback in the problem of distinguishing between two nonorthogonal coherent states

Feedback is proposed for distinguishing between two weak coherent states with phases differing by {approx}{pi}. The mutual nonorthogonality of such states gives rise to a discrimination error, which can be reduced by using feedback. An optical quantum channel is discussed where the input is classical information encoded in two weak coherent states. For a channel with feedback, the discrimination error probability is calculated, and the mutual entropy that quantifies the fidelity between input and output is evaluated. We find that the use of a feedback loop in a quantum communication channel can increase the mutual entropy when canonical position or photon number is measured.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Assessment of the hydromechanical higher-order MPM for the simulation of geotechnical problems

The Material Point Method (MPM) has been increasingly used to simulate large strain deformations. Linear interpolation functions are commonly used to perform the spatial integration. It is well-known that the discontinuities in the interpolation function derivatives induce shock-like artifacts known as ‘cell-crossing’ error. These errors compound with volumetric locking errors when used with hydromechanical formulations for porous media, where different velocity fields are used for each phase. The capabilities of higher-order MPM frameworks have not been explored for real-scale geotechnical problems. As such, this paper aims to assess, validate, and further discuss a higher-order B-spline MPM (BS-MPM) framework. First, the BS-MPM framework is verified against the large-strain oedometer consolidation problem. Second, the framework is validated against a real-scale slope failure experiment triggered by pore water pressure recharge. Landslide features that are captured using the higher-order framework are specifically highlighted, and results (e.g., pore water pressure and deformation) are validated with field measurements. A generally convergent numerical solution is observed when using cubic interpolation functions. Third, a footing penetration problem is simulated using the multi-patch BS-MPM. Trends are examined with respect to penetration velocity and variation in hydraulic conductivity. The BS-MPM framework ultimately presents a stabilized numerical solution that captures plausible hydromechanical interaction trends important in geotechnical engineering applications.

36 MATERIALS SCIENCE↗

GrainGNN: A dynamic graph neural network for predicting 3D grain microstructure

We propose GrainGNN, a surrogate model for the evolution of polycrystalline grain structure under rapid solidification conditions in metal additive manufacturing. High fidelity simulations of solidification microstructures are typically performed using multicomponent partial differential equations (PDEs) with moving interfaces. The inherent randomness of the PDE initial conditions (grain seeds) necessitates ensemble simulations to predict microstructure statistics, e.g., grain size, aspect ratio, and crystallographic orientation. Here, currently such ensemble simulations are prohibitively expensive and surrogates are necessary.In GrainGNN, we use a dynamic graph to represent interface motion and topological changes due to grain coarsening. We use a reduced representation of the microstructure using hand-crafted features; we combine pattern finding and altering graph algorithms with two neural networks, a classifier (for topological changes) and a regressor (for interface motion). Both networks have an encoder-decoder architecture; the encoder has a multi-layer transformer long-short-term-memory architecture; the decoder is a single layer perceptron.We evaluate GrainGNN by comparing it to high-fidelity phase field simulations for in-distribution and out-of-distribution grain configurations for solidification under laser power bed fusion conditions. GrainGNN results in 80%–90% pointwise accuracy; and nearly identical distributions of scalar quantities of interest (QoI) between phase field and GrainGNN simulations compared using Kolmogorov-Smirnov test. GrainGNN's inference speedup (PyTorch on single x86 CPU) over a high-fidelity phase field simulation (CUDA on a single NVIDIA A100 GPU) is 150×–2000× for 100-initial grain problem. Further, using GrainGNN, we model the formation of 11,600 grains in 220 seconds on a single CPU core.

36 MATERIALS SCIENCE↗

Third Bose fugacity coefficient in one dimension, as a function of asymptotic quantities

In one of the very few exact quantum mechanical calculations of fugacity coefficients, [L.R. Dodd, A.M. Gibbs. J. Math. Phys. 15 (1974) 41] obtained b{sub 2} and b{sub 3} for a one dimensional Bose gas, subject to repulsive delta-function interactions, by direct integration of the wave functions. For b{sub 2}, we have shown [A. Amaya-Tapia, S.Y. Larsen, M. Lassaut. Mol. Phys. 103 (2005) 1301-1306. < (arXiv:physics/0405150)>] that Dodd and Gibbs' result can be obtained from a phase shift formalism, if one also includes the contribution of oscillating terms, usually contributing only in one dimension. Now, we develop an exact expression for b{sub 3}-b{sub 3}{sup 0} (where b{sub 3}{sup 0} is the free particle fugacity coefficient) in terms of sums and differences of three-body eigenphase shifts. Further, we show that if we obtain these eigenphase shifts in a Distorted-Born approximation, then, to first order, we reproduce the leading low temperature behaviour, obtained from an expansion of the twofold integral of Dodd and Gibbs. The contributions of the oscillating terms cancel. The formalism that we propose is not limited to one dimension, but seeks to provide a general method to obtain virial coefficients, fugacity coefficients, in terms of asymptotic quantities. The exact one dimensional results allow us to confirm the validity of our approach in this domain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct numerical simulation of reactor two-phase flows enabled by high-performance computing

Nuclear reactor two-phase flows remain a great engineering challenge, where the high-resolution two-phase flow database which can inform practical model development is still sparse due to the extreme reactor operation conditions and measurement difficulties. Owing to the rapid growth of computing power, the direct numerical simulation (DNS) is enjoying a renewed interest in investigating the related flow problems. A combination between DNS and an interface tracking method can provide a unique opportunity to study two-phase flows based on first principles calculations. More importantly, state-of-the-art high-performance computing (HPC) facilities are helping unlock this great potential. This paper reviews the recent research progress of two-phase flow DNS related to reactor applications. The progress in large-scale bubbly flow DNS has been focused not only on the sheer size of those simulations in terms of resolved Reynolds number, but also on the associated advanced modeling and analysis techniques. Specifically, the current areas of active research include modeling of sub-cooled boiling, bubble coalescence, as well as the advanced post-processing toolkit for bubbly flow simulations in reactor geometries. A novel bubble tracking method has been developed to track the evolution of bubbles in two-phase bubbly flow. Also, spectral analysis of DNS database in different geometries has been performed to investigate the modulation of the energy spectrum slope due to bubble-induced turbulence. In addition, the single-and two-phase analysis results are presented for turbulent flows within the pressurized water reactor (PWR) core geometries. The related simulations are possible to carry out only with the world leading HPC platforms. Furthermore, these simulations are allowing more complex turbulence model development and validation for use in 3D multiphase computational fluid dynamics (M-CFD) codes.

97 MATHEMATICS AND COMPUTING↗

Diffusion, atomic transport, and ordering in Al-Zr alloys: FCC and liquid phases

Additive manufacturing of materials with controlled microstructure demands knowledge of atomic scale properties near the solid-liquid transition state. Many of these properties are not affordable by experimental techniques and computer modeling is the possible solution to the problem. In this paper, we present the results of an extended atomistic study of intrinsic atomic transport due to vacancy diffusion in FCC and L12 solid phases and diffusion in the liquid phase of Al-Zr alloys. A deceleration of the overall self-diffusion was observed when Zr was added to Al. The effect was stronger in the solid and weaker in the liquid. Additionally, the effect was strongly temperature dependent in the solid phases, but not in the liquid. Atomic transport was chemically biased: transport of Zr atoms was significantly slower than that of Al atoms, and this bias effect was stronger in the solid phases. The overall diffusion and chemical ordering processes in the liquid state were five to six orders in magnitude faster than in the solid. Chemical short-range order parameters in the liquid saturated at values close to those in the ordered L12 structure of Al3Zr. Chemical and structural ordering in the solid phases was negligible over the modeled microsecond time scale. Here, the results are discussed in view of optimizing additive manufacturing parameters for the controlled formation of metastable L1 2 precipitates.

36 MATERIALS SCIENCE↗

Numerical modeling of coupled fluid flow and thermal and reactive biogeochemical transport in porous and fractured media

Subsurface contamination problems of metals and radionuclides are ubiquitous. Metals and radionuclides may exist in the solute phase or may be bound to soil particles and interstitial portions of the geologic matrix. Accurate tools to reliably predict the migration and transformation of these metals and radionuclides in the subsurface environment enhance the ability of environmental scientists, engineers, and decision makers to analyze their impact and to evaluate the efficacy of alternative remediation techniques prior to incurring expense in the field. A mechanistic-based numerical model could provide such a tool. This paper communicates the development and verification of a mechanistically coupled fluid-flow thermal-reactive biogeochemical-transport model where both fast and slow reactions occur in porous and fractured media. Theoretical bases, numerical implementations, and numerical experiments using the model are described. A definition of the "rates" of fast/equilibrium reactions is presented to come up with a consistent set of governing equations. Two example problems are presented. The first one is a reactive transport problem which elucidates the non-isothermal effects on heterogeneous reactions. It also demonstrates that the rates of fast/equilibrium reactions are not necessarily greater than that of slow/kinetic reactions in the context of reactive transport. The second example focuses on a complicated but realistic advective-dispersive-reactive transport problem. This example exemplifies the need for innovative numerical algorithms to solve problems involving stiff geochemical reactions. It also demonstrates that rates of all fast/equilibrium reactions are finite and definite. Furthermore, it is noted that a species-versus-time curve cannot be used to characterize the rate of homogeneous fast/equilibrium reaction in a reactive transport system even if one and only one such reaction is responsible for the production of this species.

54 ENVIRONMENTAL SCIENCES↗

Deep learning interfacial momentum closures in coarse-mesh CFD two-phase flow simulation using validation data

Multiphase flow phenomena have been widely observed in the industrial applications while it remains a challenging yet unsolved problems. Three-dimensional computational fluid dynamics (CFD) approaches resolve the flow fields on a finer special and temporal scales which can complement the dedicated experimental study. However, closures have to be introduced to reflect the underlying physics in multiphase flow. Among them, the interfacial forces, including drag, lift, turbulent dispersion and wall lubrication forces, play in important role on the bubble’s distribution and migration in liquid-vapor two-phase flow. Development of those closures traditionally rely on the experimental data and analytical derivation with simplified assumptions which usually cannot deliver a universal solution across wide range of flow conditions. In this paper, a data-driven approach, named as Feature Similarity Measurement (FSM), is developed and applied to improve the simulation capability of two-phase flow with coarse-mesh CFD approach. Interfacial momentum transfer in adiabatic bubbly flow serves as the focus of the present study. Both a mature and a simplified set of interfacial closures are taken as the low fidelity data. Experimental data and fine mesh CFD simulations results are adopted as high-fidelity data. Qualitative and quantitative analysis are performed in this paper which reveals that FSM can substantially improve the prediction of coarse mesh CFD model regardless of the choice of interfacial closures and it provides scalability and consistency across discontinuous flow regimes. Furthermore, it demonstrates that data-driven method can aid the multiphase flow modeling by exploring the connections between local physical features and simulation errors.

97 MATHEMATICS AND COMPUTING↗

Coordinate space proton-deuteron scattering calculations including Coulomb force effects

We present a practical method to solve the proton-deuteron scattering problem at energies above the three-body breakup threshold, in which we treat three-body integral equations in coordinate space accommodating long-range proton-proton Coulomb interactions. The method is examined for phase shift parameters and then applied to calculations of differential cross sections in elastic and breakup reactions, analyzing powers, etc., with a realistic nucleon-nucleon force and three-nucleon forces. The effects of the Coulomb force and the three-nucleon forces on these observables are discussed in comparison with experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Theory of the formation of P4{sub 1}32(P4{sub 3}32)-phase spinels

A group-theoretical, thermodynamic, and structural study of the formation of P4{sub 1}32(P4{sub 3}32) spinel modification has been performed. In particular, the occurrence of unique hyper-kagome atomic order is analyzed. The critical order parameter inducing a phase transition is established. It is shown that the calculated structure of the low-symmetry P4{sub 1}32(P4{sub 3}32) phase is formed as a result of displacements of atoms of all types and due to the cation and anion ordering. The problem of the occurrence of unique hyper-kagome atomic order in the structures of P4{sub 1}32(P4{sub 3}32) spinel modifications is considered theoretically. It is proven within the Landau theory of phase transitions that the P4{sub 1}32(P4{sub 3}32) phase can be formed from the high-symmetry Fd3m phase with an ideal spinel structure only as a result of first-order phase transition. Therefore, the formation of hyper-kagome sublattice in the P4{sub 1}32(P4{sub 3}32) phase is accompanied by a significant transformation of the spinel structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluctuations destroying long-range order in SU(2) Yang-Mills theory

We study lattice SU(2) Yang-Mills theory with dimension d{>=}4. The model can be expressed as a (d-1)-dimensional O(4) nonlinear {sigma} model in a d-dimensional heat bath. As is well known, the nonlinear {sigma} model alone shows a phase transition. If the quark confinement is a consequence of the absence of a phase transition for the Yang-Mills theory, then the fluctuations of the heat bath must destroy the long-range order of the nonlinear {sigma} model. In order to clarify whether this is true, we replace the fluctuations of the heat bath with Gaussian random variables, and obtain a Langevin equation which yields the effective action of the nonlinear {sigma} model by analyzing the Fokker-Planck equation. It turns out that the fluctuations indeed destroy the long-range order of the nonlinear {sigma} model within a mean-field approximation estimating a critical point, whereas for the corresponding U(1) gauge theory, the phase transition to the massless phase remains against the fluctuations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Self-consistent extension of random-phase approximation enlarged beyond particle-hole configurations

We present a new extension of the random-phase approximation method: the quasiboson approximation is avoided and correlations are included in the ground state without resorting to renormalized operators or renormalized matrix elements; the configuration space is enlarged by considering also elementary excitations corresponding to the annihilation of a particle (hole) and the creation of another particle (hole) on the correlated ground state, together with the particle-hole ones. Two new and relevant advantages of this method with respect to the existing extensions of random-phase approximation are highlighted: (i) the energy weighted sum rules are completely satisfied; (ii) the problem of the existence of nonphysical states in the spectrum, related to the inclusion of particle-particle and hole-hole configurations, is solved: a way to unambiguously disentangle physical from nonphysical states in the excitation spectrum is presented. The method is applied here to a three-level Lipkin model where its quality can be judged by comparing with the exact results. Both advantages (i) and (ii) shall lead to feasible future applications of this extended RPA to several realistic cases.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Low-energy p-d scattering and {sup 3}He in pionless effective field theory

We calculate low-energy proton-deuteron scattering in the framework of pionless effective field theory. In the quartet channel, we calculate the elastic scattering phase shift up to next-to-next-to-leading order in the power counting. In the doublet channel, we perform a next-to-leading-order calculation. We obtain good agreement with the available phase-shift analyses down to the scattering threshold. The phase shifts in the region of nonperturbative Coulomb interactions are calculated by using an optimized integration mesh. Moreover, the Coulomb contribution to the {sup 3}He-{sup 3}H binding energy difference is evaluated in first-order perturbation theory. We comment on the implications of our results for the power counting of subleading three-body forces.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Comparison of Three Ways to Measure Time-Dependent Densities With Quantum Simulators

Quantum algorithms are touted as a way around some classically intractable problems such as the simulation of quantum mechanics. At the end of all quantum algorithms is a quantum measurement whereby classical data is extracted and utilized. In fact, many of the modern hybrid-classical approaches are essentially quantum measurements of states with short quantum circuit descriptions. Here, we compare and examine three methods of extracting the time-dependent one-particle probability density from a quantum simulation: direct Z -measurement, Bayesian phase estimation, and harmonic inversion. We have tested these methods in the context of the potential inversion problem of time-dependent density functional theory. Our test results suggest that direct measurement is the preferable method. We also highlight areas where the other two methods may be useful and report on tests using Rigetti's quantum virtual device. This study provides a starting point for imminent applications of quantum computing.

Yang, Jun↗