Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum computing for simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High frequency impedance characteristics of a tunable microplasma device

Computational studies on high frequency impedance characteristics of a microplasma device are reported. While microplasma is ignited using a primary excitation signal, frequency response of plasma impedance is determined by a secondary high frequency probe signal with significantly lower voltage amplitude such that it does not influence the plasma parameters. Here, the computational model utilizing the drift–diffusion approximation is first validated by comparing with experimental data for microplasmas ignited at pressures ranging from 1 to 5 Torr. In spite of quantitative discrepancies, good overall agreement is obtained between the measured frequency response of impedance of the discharge. Comparisons are also presented for various plasma parameters including mean electron number density, sheath thickness, mean electron temperature, and collision frequency that were inferred from the impedance measurements. The computational model is then used to perform simulations of near-atmospheric pressure microplasmas with the probe signal frequency ranging from 3 to 20 GHz. The simulations demonstrate the presence of a resonance frequency at which the impedance vanishes. More importantly, it is shown that this resonant frequency can be tuned effectively by suitably modifying the operating parameters (gap size, pressure, and excitation voltage). The simulated impedance characteristics are used to determine the effective plasma inductance and capacitance using a non-linear fitting approach, thereby showing the dependence of these electrical parameters on the plasma operating conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Surface-Controlled TiO 2 Nanocrystals with Catalytically Active Single-Site Co Incorporation for the Oxygen Evolution Reaction

The design of advanced electrocatalysts is often hindered by uncertainties in identifying and controlling the active surfaces and catalytic centers within heterogeneous materials. Here we present the synthesis of single-site Co catalysts, substitutionally doped into surface-controlled TiO 2 anatase nanocrystals, aimed at enhancing the oxygen evolution reaction (OER). Grand canonical quantum mechanics calculations reveal that the kinetics of the OER, following an adsorbate evolution mechanism, is markedly influenced by the coordination environment of Co. The simulations suggest significantly higher turnover frequencies when Co is doped into the (001) surface of TiO 2 compared to the (101) surface. Consistent with the computational findings, experimental results show that Co-doped TiO 2 (Co-TiO 2 ) nanoplates with selectively exposed {001} surfaces exhibit enhanced current densities and turnover frequencies compared to Co-TiO 2 nanobipyramids with {101} surfaces. This study highlights the synergy between theoretical calculations and precision synthesis in the development of more effective catalysts.

25 ENERGY STORAGE↗
DOE OSTI2018

Influence of surface nano-patterning on the placement of InAs quantum dots

We have examined the influence of spontaneous nano-patterning on the placement of InAs quantum dots (QDs) on (Al)GaAs surfaces using an experimental-computational approach. Both atomically flat and mounded surfaces, generated via a surface instability induced by the Ehrlich- Schwoebel barrier, are employed as templates for the subsequent deposition of InAs QDs. Using height profiles from atomic-force micrographs, we simulate QD deposition with a 2D phase field model, which describes the time evolution of the InAs layer driven by a chemical potential gradient. For flat surfaces, phase-field simulations result in QD densities comparable to experimental observations. For mounded surfaces, the simulations reveal QDs preferentially positioned in regions of positive curvature (substrate valleys), e.g., at the edge of surface mounds, consistent with the anisotropic QD placement observed experimentally. We discuss the role of curvaturedriven diffusion in the spontaneous ordering of QDs, demonstrating the applicability of this mechanism to AlGaAs mounds.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Teaching Quantum Computing to High School Students

Quantum computing is a growing field at the intersection of physics and computer science. The goal of this article is to highlight a successfully trialled quantum computing course for high school students between the ages of 15 and 18 years old. This course was designed to bridge the gap between popular science articles and advanced undergraduate textbooks. Conceptual ideas in the text are reinforced with active learning techniques, such as interactive problem sets and simulation-based labs at various levels. The course is freely available for use and download under the Creative Commons “Attribution-NonCommercial-ShareAlike 4.0 International” license.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Spiky electric and magnetic field structures in flux rope experiments

Magnetic flux ropes are structures that are common in the corona of the sun and presumably all stars. They can be thought of as the building blocks of solar structures. They have been observed in Earth’s magnetotail and near Mars and Venus. When multiple flux ropes are present magnetic field line reconnection, which converts magnetic energy to other forms, can occur when they collide. The structure of multiple magnetic ropes, the interactions between multiple ropes, and their topological properties such as helicity and writhing have been studied theoretically and in laboratory experiments. In this paper, we report on spiky potential and magnetic fields associated with the ropes. We show that the potential structures are chaotic for a range of their temporal half-widths and the probability density function (PDF) of their widths resembles the statistical distribution of crumpled paper. The spatial structure of the magnetic spikes is revealed using a correlation counting method. Computer simulation suggests that the potential structures are the nonlinear end result of an instability involving relative drift between ions and electrons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

The Quantum Alternating Operator Ansatz for Satisfiability Problems

Here, we comparatively study, through large-scale numerical simulation, the performance across a large set of Quantum Alternating Operator Ansatz (QAOA) implementations for finding approximate and optimum solutions to unconstrained combinatorial optimization problems. Our survey includes over 100 different mixing unitaries, and we combine each mixer with both the standard phase separator unitary representing the objective function and a thresholded version. Our numerical tests for randomly chosen instances of the unconstrained optimization problems Max 2-SAT and Max 3-SAT reveal that the traditional transverse-field mixer with the standard phase separator performs best for problem sizes of 8 through 14 variables, while the recently introduced Grover mixer with thresholding wins at problems of size 6. This result (i) corrects earlier work suggesting that the Grover mixer is a superior mixer based only on results from problems of size 6, thus illustrating the need to push numerical simulation to larger problem sizes to more accurately predict performance; and (ii) it suggests that more complicated mixers and phase separators may not improve QAOA performance.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Symmetry dilemmas in quantum computing for chemistry: A comprehensive analysis

Symmetry adaptation, universality, and gate efficiency are central but often competing requirements in quantum algorithms for electronic structure and many-body physics. For example, fully symmetry-adapted universal operator pools typically generate long and deep quantum circuits; gate-efficient universal operator pools generally break symmetries; and gate-efficient, fully symmetry-adapted operator pools may not be universal. In this work, we analyze such symmetry dilemmas both theoretically and numerically. On the theory side, we prove that the popular, gate-efficient operator pool consisting of singlet spin-adapted singles and perfect-pairing doubles is not universal when spatial symmetry is enforced. To demonstrate the strengths and weaknesses of the three types of pools, we perform numerical simulations using an adaptive algorithm paired with operator pools that are (i) fully symmetry-adapted and universal, (ii) fully symmetry-adapted and non-universal, and (iii) breaking a single symmetry and universal. Our numerical simulations encompass three physically relevant scenarios in which the target state is (i) the global ground state, (ii) the ground state crossed by a state differing in multiple symmetry properties, and (iii) the ground state crossed by a state differing in a single symmetry property. Our results show when symmetry-breaking but universal pools can be used safely, when enforcing at least one distinguishing symmetry suffices, and when a particular symmetry must be rigorously preserved to avoid variational collapse. Together, the formal and numerical analyses provide a practical guide for designing and benchmarking symmetry-adapted operator pools that balance universality, resource requirements, and robust state targeting in quantum simulations for chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

A Bayesian Approach to Predict Solubility Parameters

Abstract Solubility is a ubiquitous phenomenon in many aspects of material science. While solubility can be determined by considering the cohesive forces in a liquid via the Hansen solubility parameters (HSP), quantitative structure–property relationship models are often used for prediction, notably due to their low computational cost. Here, gpHSP, an interpretable and versatile probabilistic approach to determining HSP, is reported. Our model is based on Gaussian processes, a Bayesian machine learning approach that provides uncertainty bounds to prediction. gpHSP achieves its flexibility by leveraging a variety of input data, such as SMILES strings, COSMOtherm simulations, and quantum chemistry calculations. gpHSP is built on experimentally determined HSP, including a general solvents set aggregated from the literature, and a polymer set experimentally characterized by this group of authors. In all sets, a high degree of agreement is obtained, surpassing well‐established machine learning methods. The general applicability of gpHSP to miscibility of organic semiconductors, drug compounds, and in general solvents is demonstrated, which can be further extended to other domains. gpHSP is a fast and accurate toolbox, which could be applied to molecular design for solution processing technologies.

Sanchez‐Lengeling, Benjamin↗
DOE OSTI2023

Integrated Quantum-Classical Protocol for the Realistic Description of Solvated Multinuclear Mixed-Valence Transition-Metal Complexes and Their Solvatochromic Properties

Linear cyanide-bridged polymetallic complexes, which undergo photoinduced metal-to-metal charge transfer, represent prototypical systems for studying long-range electron-transfer reactions and understanding the role played by specific solute–solvent interactions in modulating the excited-state dynamics. Here, to tackle this problem, while achieving a statistically meaningful description of the solvent and of its relaxation, one needs a computational approach capable of handling large polynuclear transition-metal complexes, both in their ground and excited states, as well as the ability to follow their dynamics in several environments up to nanosecond time scales. Here, we present a mixed quantum classical approach, which combines large-scale molecular dynamics (MD) simulations based on an accurate quantum mechanically derived force field (QMD-FF) and self-consistent QMD polarized point charges, with IR and UV–vis spectral calculations to model the solvation dynamics and optical properties of a cyano-bridged trinuclear mixed-valence compound (trans-[(NC) 5 Fe III (μ-CN)Ru II (pyridine) 4 (μ-NC)Fe III (CN) 5 ] 4– ). We demonstrate the reliability of the QMD-FF/MD approach in sampling the solute conformational space and capturing the local solute–solvent interactions by comparing the results with higher-level quantum mechanics/molecular mechanics (QM/MM) MD reference data. The IR spectra calculated along the classical MD trajectories in different solvents correctly predict the red shift of the CN stretching band in the aprotic medium (acetonitrile) and the subtle differences measured in water and methanol, respectively. By explicitly including the solvent molecules around the cyanide ligands and calculating the thermal averaged absorption spectra using time-dependent density functional theory calculations within the Tamm–Dancoff approximation, the experimental solvatochromic shift is quantitatively reproduced going from water to methanol, while it is overestimated for acetonitrile. This discrepancy can likely be traced back to the lack of important dispersion interactions between the solvent cyano groups and the pyridine substituents in our micro solvation model. The proposed protocol is applied to the ground state in water, methanol, and acetonitrile and can be flexibly generalized to study excited-state nonequilibrium solvation dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A parametrically programmable delay line for microwave photons

Delay lines that store quantum information are crucial for advancing quantum repeaters and hardware efficient quantum computers. Traditionally, they are realized as extended systems that support wave propagation but provide limited control over the propagating fields. Here, we introduce a parametrically addressed delay line for microwave photons that provides a high level of control over the stored pulses. By parametrically driving a three-wave mixing circuit element that is weakly hybridized with an ensemble of resonators, we engineer a spectral response that simulates that of a physical delay line, while providing fast control over the delay line’s properties. We demonstrate this novel degree of control by choosing which photon echo to emit, translating pulses in time, and even swapping two pulses, all with pulse energies on the order of a single photon. We also measure the noise added from our parametric interactions and find it is much less than one photon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

1 / ω electric-field noise in surface ion traps from correlated adsorbate dynamics

Ion traps are promising architectures for implementing quantum computers, but they suffer from excessive “anomalous” ion motional heating that limit their overall coherence and practicality for scalable quantum computing. The exact microscopic origins of anomalous heating remain an open question, but experiments point to adsorbates on trap electrodes as one likely source. Many different models of anomalous heating have been proposed, but these models have yet to pinpoint the atomistic origin of the experimentally observed 1/ω electric-field noise scaling seen in ion traps at frequencies between 0.1–10 MHz. In this work, we show that a model based on previously proposed surface-induced dipole fluctuations on adsorbates, but which also incorporates interparticle interaction dynamics through molecular dynamics simulations of up to multiple monolayers of adsorbates, gives rise to 1/ω frequency scaling at the MHz frequencies typically employed in ion traps. Overall, these results demonstrate that moderate-to-high densities of adsorbates can give rise to a set of activated motions that produce the 1/ω noise observed in ion traps and that collective adsorbate motions produce the observed noise spectra that a noninteracting model does not capture.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Decoherence in Molecular Electron Spin Qubits: Insights from Quantum Many-Body Simulations

Quantum states are described by wave functions whose phases cannot be directly measured, but which play a vital role in quantum effects such as interference and entanglement. The loss of the relative phase information, termed decoherence, arises from the interactions between a quantum system and its environment. Decoherence is perhaps the biggest obstacle on the path to reliable quantum computing. Here we show that decoherence occurs even in an isolated molecule although not all phase information is lost via a theoretical study of a central electron spin qubit interacting with nearby nuclear spins in prototypical magnetic molecules. The residual coherence, which is molecule-dependent, provides a microscopic rationalization for the nuclear spin diffusion barrier proposed to explain experiments. The contribution of nearby molecules to the decoherence has a non-trivial dependence on separation, peaking at intermediate distances. Molecules that are far away only affect the long-time behavior. Because the residual coherence is simple to calculate and correlates well with the coherence time, it can be used as a descriptor for coherence in magnetic molecules. This work will help establish design principles for enhancing coherence in molecular spin qubits and serve to motivate further theoretical work

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Ion-Optical System of an Ion Source with Energy Focusing in the Formed Beam

Ways to reduce ion beam intensity losses in a mass spectrometric ion source, which are caused by chromatic aberration of its immersion ion-optical system, are considered. These losses are rather significant in forming a beam from ions with a large energy spread. The reduction of aberration losses is especially important when ion sources are used jointly with mass analyzers with energy focusing. It is shown that these losses can be reduced significantly by using a new type of ion-optical system of the ion source, which includes achromatic elements. A special method for calculating such elements is given. Computer simulations have shown high efficiency of such elements in the ion-optical path of ion sources of mass spectrometers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

SIERRA/Aero Theory Manual - Version 5.8

SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Inference-Based Quantum Sensing

In a standard quantum sensing (QS) task one aims at estimating an unknown parameter θ, encoded into an n-qubit probe state, via measurements of the system. The success of this task hinges on the ability to correlate changes in the parameter to changes in the system response $\mathscr{R}$⁡(θ) (i.e., changes in the measurement outcomes). For simple cases the form of $\mathscr{R}$⁡(θ) is known, but the same cannot be said for realistic scenarios, as no general closed-form expression exists. Here, in this Letter, we present an inference-based scheme for QS. We show that, for a general class of unitary families of encoding, $\mathscr{R}$⁡(θ) can be fully characterized by only measuring the system response at 2⁢n+1 parameters. This allows us to infer the value of an unknown parameter given the measured response, as well as to determine the sensitivity of the scheme, which characterizes its overall performance. We show that inference error is, with high probability, smaller than δ, if one measures the system response with a number of shots that scales only as Ω⁢(log 3 ⁡(n)/δ 2 ). Furthermore, the framework presented can be broadly applied as it remains valid for arbitrary probe states and measurement schemes, and, even holds in the presence of quantum noise. We also discuss how to extend our results beyond unitary families. Finally, to showcase our method we implement it for a QS task on real quantum hardware, and in numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Mechanism for particle fractionalization and universal edge physics in quantum Hall fluids

Abstract Advancing a microscopic framework that rigorously unveils the underlying topological hallmarks of fractional quantum Hall (FQH) fluids is a prerequisite for making progress in the classification of strongly-coupled topological matter. We present a second-quantization framework that reveals an exact fusion mechanism for particle fractionalization in FQH fluids, and uncovers the fundamental structure behind the condensation of non-local operators characterizing topological order in the lowest-Landau-level. We show the first exact analytic computation of the quasielectron Berry connections leading to its fractional charge and exchange statistics, and perform Monte Carlo simulations that numerically confirm the fusion mechanism for quasiparticles. We express the sequence of (bosonic and fermionic) Laughlin second-quantized states, highlighting the lack of local condensation, and present a rigorous constructive subspace bosonization dictionary for the bulk fluid. Finally, we establish universal long-distance behavior of edge excitations by formulating a conjecture based on the DNA, or root state, of the FQH fluid.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Influence of Electronic Polarization on the Spectral Density

Accurate spectral densities are necessary for computing realistic exciton dynamics and nonlinear optical spectra of chromophores in condensed-phase environments, including multichromophore pigment–protein systems. However, due to the significant computational cost of computing spectral densities from first principles, requiring many thousands of excited-state calculations, most simulations of realistic systems rely on treating the environment as fixed-point charges. In this work, using a number of representative systems ranging from solvated chromophores to the photoactive yellow protein (PYP), we demonstrate that the quantum mechanical (QM) electronic polarization of the environment is key to obtaining accurate spectral densities and line shapes within the cumulant framework. We show that the QM environment can enhance or depress the coupling of fast chromophore degrees of freedom to the energy gap, altering the electronic–vibrational coupling and the resulting vibronic progressions in the absorption spectrum. In analyzing the physical origin of peaks in the spectral density, we identify vibrational modes that couple the electron and the hole as being particularly sensitive to the QM screening of the environment. For PYP, we reveal the need for careful determination of the appropriate QM region to obtain reliable spectral densities. Our findings suggest that the QM polarization of the environment can be crucial not just for excitation energies but also for electronic–vibrational coupling in complex systems with implications for the correct modeling of linear and nonlinear optical spectroscopy in the condensed phase as well as energy transfer in pigment–protein complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗