Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Short-Lived Electron Excitations in FeTe{sub 1 –x}Se{sub x} as Revealed by Microwave Absorption

The Fe{sub 1 +y}Te{sub 1 –x}Se{sub x} single crystals with the various Se/Te ratios were studied by the microwave absorption and direct current resistivity measurements. The comparison of the microwave absorption data and the resistivity versus temperature made it possible to separate the contributions of two types of spin fluctuations. One of them is due to the anisotropic magnetic (nematic) fluctuations. It is observed over the wide temperature range from ~30 to 150 or 200 K. In FeSe it has the maximum close to the structural transition temperature. Another MWA anomaly is located in the narrow temperature range above the superconducting transition. It is likely due to the antiferromagnetic fluctuations. Annealing of a sample at the temperature around 300°C in the oxygen atmosphere made it possible to exclude the effect of excess iron on the observed anomalies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of double-beta decay with the NEMO-3 detector

The double-beta-decay experiment NEMO-3 has been taking data since February 2003. The aim of this experiment is to search for neutrinoless (0 {nu}{beta}{beta}) decay and investigate two neutrino doublebeta decay in seven different isotopically enriched samples ({sup 100}Mo, {sup 82}Se, {sup 48}Ca, {sup 96}Zr, {sup 116}Cd, {sup 130}Te, and {sup 150}Nd). After analysis of the data corresponding to 3.75 yr, no evidence for 0 {nu}{beta}{beta} decay in the 100Mo and 82Se samples was found. The half-life limits at the 90% C.L. are 1.1 Multiplication-Sign 10{sup 24} and 3.6 Multiplication-Sign 10{sup 23} yr, respectively. Additionally for 0 {nu}{beta}{beta} decay the following limits at the 90% C.L. were obtained, >1.3 Multiplication-Sign 10{sup 22} yr for {sup 48}Ca, >9.2 Multiplication-Sign 10{sup 21} yr for {sup 96}Zr, and >1.8 Multiplication-Sign 10{sup 22} yr for 150Nd. The 2 {nu}{beta}{beta} decay half-life values were precisely measured for all investigated isotopes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photoneutron reactions in astrophysics

Among key problems in nuclear astrophysics, that of obtaining deeper insight into the mechanism of synthesis of chemical elements is of paramount importance. The majority of heavy elements existing in nature are produced in stars via radiative neutron capture in so-called s- and r processes, which are, respectively, slow and fast, in relation to competing β{sup −}-decay processes. At the same time, we know 35 neutron-deficient so-called bypassed p-nuclei that lie between {sup 74}Se and {sup 196}Hg and which cannot originate from the aforementioned s- and r-processes. Their production is possible in (γ, n), (γ, p), or (γ, α) photonuclear reactions. In view of this, data on photoneutron reactions play an important role in predicting and describing processes leading to the production of p-nuclei. Interest in determining cross sections for photoneutron reactions in the threshold energy region, which is of particular importance for astrophysics, has grown substantially in recent years. The use of modern sources of quasimonoenergetic photons obtained in processes of inverse Compton laser-radiation scattering on relativistic electronsmakes it possible to reveal rather interesting special features of respective cross sections, manifestations of pygmy E1 and M1 resonances, or the production of nuclei in isomeric states, on one hand, and to revisit the problem of systematic discrepancies between data on reaction cross sections from experiments of different types, on the other hand. Data obtained on the basis of our new experimental-theoretical approach to evaluating cross sections for partial photoneutron reactions are invoked in considering these problems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Role of (n,2n) reactions in transmutation of long-lived fission products

The conditions under which (n,γ) and (n,2n) reactions can help or hinder each other in neutron transmutation of long-lived fission products (LLFPs) are considered. Isotopic and elemental transmutation for the main long-lived fission products, {sup 79}Se, {sup 93}Zr, {sup 99}Tc, {sup 107}Pd, {sup 126}Sn, {sup 129}I, and {sup 135}Cs, are considered. The effect of (n,2n) reactions on the equilibrium amount of nuclei of the transmuted isotope and the neutron consumption required for the isotope processing is estimated. The aim of the study is to estimate the influence of (n,2n) reactions on efficiency of neutron LLFP transmutation. The code TIME26 and the libraries of evaluated nuclear data ABBN-93, JEF-PC, and JANIS system are applied. The following results are obtained: (1) The effect of (n,2n) reactions on the minimum number of neutrons required for transmutation and the equilibrium amount of LLFP nuclei is estimated. (2) It is demonstrated that, for three LLFP isotopes ({sup 126}Sn, {sup 129}I, and {sup 135}Cs), (n,γ) and (n,2n) reactions are partners facilitating neutron transmutation. The strongest effect of (n,2n) reaction is found for {sup 126}Sn transmutation (reduction of the neutron consumption by 49% and the equilibrium amount of nuclei by 19%).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modern status of photonuclear data

The reliability of experimental cross sections obtained for (γ, 1n), (γ, 2n), and (γ, 3n) partial photoneutron reactions using beams of quasimonoenergetic annihilation photons and bremsstrahlung is analyzed by employing data for a large number of medium-heavy and heavy nuclei, including those of {sup 63,65}Cu, {sup 80}Se, {sup 90,91,94}Zr, {sup 115}In, {sup 112−124}Sn, {sup 133}Cs, {sup 138}Ba, {sup 159}Tb, {sup 181}Ta, {sup 186−192}Os, {sup 197}Au, {sup 208}Pb, and {sup 209}Bi. The ratios of the cross sections of definite partial reactions to the cross section of the neutron-yield reaction, F{sub i} = σ(γ, in)/σ(γ, xn), are used as criteria of experimental-data reliability. By definition, positive values of these ratios should not exceed the upper limits of 1.00, 0.50, 0.33,... for i = 1, 2, 3,..., respectively. For many nuclei, unreliable values of the above ratios were found to correlate clearly in various photon-energy regions F{sub i} with physically forbidden negative values of cross sections of partial reactions. On this basis, one can conclude that correspondent experimental data are unreliable. Significant systematic uncertainties of the methods used to determine photoneutron multiplicity are shown to be the main reason for this. New partial-reaction cross sections that satisfy the above data-reliability criteria were evaluated within an experimental–theoretical method [σ{sup eval}(γ, in) = F{sub i}{sup theor} (γ, in) × σ{sup expt}(γ, xn)] by employing the ratios F{sub i}{sup theor} (γ, in) calculated on the basis of a combined photonuclear-reaction model. It was obtained that cross sections evaluated in this way deviate substantially from the results of many experiments performed via neutron-multiplicity sorting, but, at the same time, agree with the results of alternative activation experiments. Prospects of employing methods that would provide, without recourse to photoneutron-multiplicity sorting, reliable data on cross sections of partial photoneutron reactions are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structure of cadmium selen-telluride alloy films grown by the thermal-screen method under highly nonequilibrium conditions

The results of technological experiments and structural investigations of films of CdSe{sub x}Te{sub 1-x} alloys synthesized by the thermal-screen method on heated and cooled substrates (under highly nonequilibrium conditions) are presented. It is shown that the synthesis of the entire range of compositions of alloy films with the structure from epitaxial to amorphous is possible from the mechanical mixture of CdSe and CdTe powders of the same composition under highly nonequilibrium conditions. The electron diffraction patterns and the microphotographs of film surfaces are reported.

36 MATERIALS SCIENCE↗

Electrical properties of In{sub 2}Se{sub 3} single crystals and photosensitivity of Al/In{sub 2}Se{sub 3} Schottky barriers

In{sub 2}Se{sub 3} single crystals {approx}40 mm long and 14 mm in diameter were grown by the Bridgman method. The composition of grown single crystals and their crystal structure were determined. The conductivity ({sigma}) and Hall constant (R) of grown single crystals were measured and the first Schottky barriers Al/n-In{sub 2}Se{sub 3} were fabricated. Rectification and photovoltaic effect were detected in the new structures. Based on the study of the photosensitivity spectra of Al/n-In{sub 2}Se{sub 3} structures, the nature of the interband transitions and band gap of In{sub 2}Se{sub 3} crystals were determined. It was concluded that the new structures can be applied to develop broadband photoconverters of optical radiation.

36 MATERIALS SCIENCE↗

Formation of three-dimensional ZnSe-based semiconductor nanostructures

Nanostructures consisting of a 10-nm-thick sacrificial layer of ZnMgSSe and a 20-nm-thick stressed bilayer of ZnSSe/ZnSe were grown by molecular-beam epitaxy on GaAs substrates. Upon removal of the sacrificial layer by selective etching, multiwall ZnSSe/ZnSe microtubes were formed.

36 MATERIALS SCIENCE↗

Electrical properties of hybrid (ferromagnetic metal)-(layered semiconductor) Ni/p-GaSe structures

Two-barrier Ni/n-Ga2Se3/p-GaSe structures with nanoscale Ni-alloy grains caused by reactions at the 'metal-layered semiconductor' interface were formed after growing Ni layers on the p-GaSe (0001) surface. Current-voltage and capacitance-voltage characteristics of hybrid structures were studied in the temperature range of 220-350 K. The dependence of the impedance spectra on the bias voltage was studied at various temperatures. The frequency dependences of the impedance at high frequencies (f = 10{sup 6} Hz) are discussed in terms of the phenomena of spin injection and extraction in structures with an ultrathin spin-selective Ni/n-Ga{sub 2}Se{sub 3} barrier and the effects of spin diffusion and relaxation in the semiconductor substrate. The room-temperature phenomena of the Coulomb blockade and negative differential capacitance were detected. These phenomena are explained based on an analysis of transport processes in a narrow region near the 'ferromagnetic metal-semiconductor' interface, where nanoscale grains are arranged.

36 MATERIALS SCIENCE↗

Exciton binding energy in semiconductor quantum dots

In the adiabatic approximation in the context of the modified effective mass approach, in which the reduced exciton effective mass {mu} = {mu}(a) is a function of the radius a of the semiconductor quantum dot, an expression for the exciton binding energy E{sub ex}(a) in the quantum dot is derived. It is found that, in the CdSe and CdS quantum dots with the radii a comparable to the Bohr exciton radii a{sub ex}, the exciton binding energy E{sub ex}(a) is substantially (respectively, 7.4 and 4.5 times) higher than the exciton binding energy in the CdSe and CdS single crystals.

36 MATERIALS SCIENCE↗

Specific features of the luminescence and conductivity of zinc selenide on exposure to X-ray and optical excitation

The set of experimental data on the X-ray-excited luminescence and X-ray induced conductivity of ZnSe are compared to the data on the photoluminescence and photoconductivity. It is experimentally established that the current-voltage characteristics and the kinetics of phosphorescence and current relaxation depend on the type of excitation. It is found that the external electric field influences the intensity and shape of bands in the luminescence spectra. It is shown that the character of excitation defines the kinetics of recombination, charge carrier trapping, and conductivity in wide-gap semiconductors.

36 MATERIALS SCIENCE↗

Evolution of exciton states near the percolation threshold in two-phase systems with II-VI semiconductor quantum dots

From studies of two-phase systems (borosilicate matrices containing ZnSe or CdS quantum dots), it was found that the systems exhibit a specific feature associated with the percolation phase transition of charge carriers (excitons). The transition manifests itself as radical changes in the optical spectra of both ZnSe and CdS quantum dot systems and by fluctuations of the emission band intensities near the percolation threshold. These effects are due to microscopic fluctuations of the density of quantum dots. The average spacing between quantum dots is calculated taking into account their finite dimensions and the volume fraction occupied by the quantum dots at the percolation threshold. It is shown that clustering of quantum dots occurs via tunneling of charge carriers between the dots. A physical mechanism responsible for the percolation threshold for charge carriers is suggested. In the mechanism, the permittivity mismatch of the materials of the matrix and quantum dots plays an important role in delocalization of charge carriers (excitons): due to the mismatch, 'a dielectric trap' is formed at the external surface of the interface between the matrix and a quantum dot and, thus, surface exciton states are formed there. The critical concentrations of quantum dots are determined, such that the spatial overlapping of such surface states provides the percolation transition in both systems.

36 MATERIALS SCIENCE↗

Two-electron tin centers arising in glassy chalcogenides of arsenic due to nuclear reactions

Impurity {sup 119m}Sn atoms arising as a result of radioactive decay of parent {sup 119mm}Sn atoms in the structure of the glasses As{sub 2}S{sub 3}, As{sub 2}Se{sub 3}, and As{sub 2}Te{sub 3} are part of the glass composition in the form of structural units corresponding to tetravalent tin. The impurity {sup 119m}Sn atoms formed as a result of radioactive decay of {sup 119}Sb atoms in the structure of the As{sub 2}S{sub 3} and As{sub 2}Se{sub 3} glasses are localized at the arsenic sites and play the role of two-electron centers with a negative correlation energy. For the As{sub 2}Te{sub 3} glass, similarly formed {sup 119m}Sn atoms are electrically inactive. The greatest part of the daughter {sup 119m}Sn atoms arising after radioactive decay of parent {sup 119m}Te atoms are located at the chalcogen sites and are electrically inactive in the As{sub 2}S{sub 3}, As{sub 2}Se{sub 3}, and As{sub 2}Te{sub 3} glasses. A significant recoil energy of daughter atoms in the case of the {sup 119m}Te radioactive decay brings about the appearance of the {sup 119m}Sn displaced atoms.

36 MATERIALS SCIENCE↗

Features of the charge transfer in structures based on thin layers of bismuth-modified arsenic triselenide

The influence of the amount of introduced bismuth impurity on the charge transport and accumulation in amorphous As{sub 2}Se{sub 3} layers has been studied. A relation between the relaxation transport processes and the change in the internal structure of the material under study has been found. The physical parameters characterizing the electronic processes (contact capacitance, density of localized states responsible for the charge accumulation in the contact region, charge constant of the contact region, and charge-carrier mobility) have been determined in the arsenic triselenide layers. The mechanisms of the effects observed are discussed.

36 MATERIALS SCIENCE↗

Optical properties of thin GaSe/n-Si(111) films

Morphological and optical studies (ellipsometry and reflectance spectroscopy in the ranges 400-750 nm and 1.4-25 {mu}m) of thin GaSe films fabricated by thermal evaporation on the n-Si (111) single-crystal substrates are reported. The film thickness was 15-60 nm. It is established that, in the initial stage of growth, the growth of GaSe on the n-Si (111) substrates occurs via formation of islands (three-dimensional growth). It is shown that, as the thickness increases, the physical parameters of the film change and the films approach single crystals in crystalline and energy band structure. For films with a thickness of 60 nm, the reflectance band peak is attributed to indirect optical transitions enhanced by reflection from the film-substrate interface. From the results of optical studies, quantum effects in the surface region of the thin films are conjectured.

36 MATERIALS SCIENCE↗

Charge neutrality level and electronic properties of GaSe under pressure

Calculations of lattice parameters and electron band spectra of GaSe have been carried out from the first principles. The dependence of these parameters on hydrostatic compression as high as 5 GPa and on homogeneous biaxial tensile and compressive stresses (from -3 to 3 GPa) in the basal plane of the unit cell is considered. The calculations adequately reproduce the experimental features of the major interband transitions in GaSe under a hydrostatic pressure and, in the absence of experimental data, predict the dependence of structural and electronic properties of GaSe under the effect of a biaxial stress. On the basis of calculated band spectra, the energy position of the local charge neutrality level CNL, E{sub v} + 0.8 eV, has been determined and electronic properties of the as-grown material and energy diagrams for interphase boundaries in GaSe have been analyzed.

36 MATERIALS SCIENCE↗