Search NASA⌕ Search

SEARCH · Search NASA

Results for “simulation analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

The Large Quadrupole of Water Molecules

Many quantum mechanical calculations indicate water molecules in the gas and liquid phase have much larger quadrupole moments than any of the common site models of water for computer simulations. Here, comparisons of multipoles from quantum mechanical/molecular mechanical (QM/MM) calculations at the MP2/aug-cc-pVQZ level on a B3LYP/aug-cc-pVQZ level geometry of a waterlike cluster and from various site models show that the increased square planar quadrupole can be attributed to the p-orbital character perpendicular to the molecular plane of the highest occupied molecular orbital as well as a slight shift of negative charge toward the hydrogens. The common site models do not account for the p-orbital type electron density and fitting partial charges of TIP4P- or TIP5P-type models to the QM/MM dipole and quadrupole give unreasonable higher moments. Furthermore, six partial charge sites are necessary to account reasonably for the large quadrupole, and polarizable site models will not remedy the problem unless they account for the p-orbital in the gas phase since the QM calculations show it is present there too. On the other hand, multipole models by definition can use the correct multipoles and the electrostatic potential from the QM/MM multipoles is much closer than that from the site models to the potential from the QM/MM electron density. Finally, Monte Carlo simulations show that increasing the quadrupole in the soft-sticky dipole-quadrupole-octupole multipole model gives radial distribution functions that are in good agreement with experiment

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate Monte Carlo simulations on FCC and HCP Lennard-Jones solids at very low temperatures and high reduced densities up to 1.30

Canonical Monte Carlo simulations on face-centered cubic (FCC) and hexagonal closed packed (HCP) Lennard-Jones (LJ) solids are conducted at very low temperatures (0.10 ≤ T{sup ∗} ≤ 1.20) and high densities (0.96 ≤ ρ{sup ∗} ≤ 1.30). A simple and robust method is introduced to determine whether or not the cutoff distance used in the simulation is large enough to provide accurate thermodynamic properties, which enables us to distinguish the properties of FCC from that of HCP LJ solids with confidence, despite their close similarities. Free-energy expressions derived from the simulation results are also proposed, not only to describe the properties of those individual structures but also the FCC-liquid, FCC-vapor, and FCC-HCP solid phase equilibria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ANALYSIS OF METHODS FOR DETECTING THE PROXIMITY EFFECT IN QUASAR SPECTRA

Using numerical simulations of structure formation, we investigate several methods for determining the strength of the proximity effect in the H I Ly{alpha} forest. We analyze three high-resolution ({approx}10 kpc) redshift snapshots (z-bar=4,3, and 2.25) of a Hydro-Particle-Mesh simulation to obtain realistic absorption spectra of the H I Ly{alpha} forest. We model the proximity effect along the simulated sight lines with a simple analytical prescription based on the assumed quasar luminosity and the intensity of the cosmic UV background (UVB). We begin our analysis investigating the intrinsic biases thought to arise in the widely adopted standard technique of combining multiple lines of sight when searching for the proximity effect. We confirm the existence of these biases, albeit smaller than previously predicted with simple Monte Carlo simulations. We then concentrate on the analysis of the proximity effect along individual lines of sight. After determining its strength with a fiducial value of the UVB intensity, we construct the proximity effect strength distribution (PESD). We confirm that the PESD inferred from the simple averaging technique accurately recovers the input strength of the proximity effect at all redshifts. Moreover, the PESD closely follows the behaviors found in observed samples of quasar spectra. However, the PESD obtained from our new simulated sight lines presents some differences to that of simple Monte Carlo simulations. At all redshifts, we find a smaller dispersion of the strength parameters, the source of the corresponding smaller biases found when combining multiple lines of sight. After developing three new theoretical methods for recovering the strength of the proximity effect on individual lines of sight, we compare their accuracy to the PESD from the simple averaging technique. All our new approaches are based on the maximization of the likelihood function, albeit invoking some modifications. The new techniques presented here, in spite of their complexity, fail to recover the input proximity effect in an unbiased way, presumably due to some (unknown) higher order correlations in the spectrum. Thus, employing complex three-dimensional simulations, we provide strong evidence in favor of the PESD obtained from the simple averaging technique, as a method of estimating the UVB intensity, free of any intrinsic biases.

79 ASTRONOMY AND ASTROPHYSICS↗

Spectral Solutions of Self-adjoint Elliptic Problems with Immersed Interfaces

This paper describes a spectral representation of solutions of self-adjoint elliptic problems with immersed interfaces. The interface is assumed to be a simple non-self-intersecting closed curve that obeys some weak regularity conditions. The problem is decomposed into two problems, one with zero interface data and the other with zero exterior boundary data. The problem with zero interface data is solved by standard spectral methods. The problem with non-zero interface data is solved by introducing an interface space H{sub {Gamma}}({Omega}) and constructing an orthonormal basis of this space. This basis is constructed using a special class of orthogonal eigenfunctions analogously to the methods used for standard trace spaces by Auchmuty (SIAM J. Math. Anal. 38, 894-915, 2006). Analytical and numerical approximations of these eigenfunctions are described and some simulations are presented.

97 MATHEMATICS AND COMPUTING↗

Neoclassical equilibria as starting point for global gyrokinetic microturbulence simulations

The implementation of linearized operators describing inter- and like-species collisions in the global gyrokinetic particle-in-cell code ORB5[S. Jolliet, Comput. Phys. Commun. 177, 409 (2007)] is presented. A neoclassical axisymmetric equilibrium with self-consistent electric field can be obtained with no assumption made on the radial width of the particle trajectories. The formulation thus makes it possible to study collisional transport in regions where the neoclassical approximation breaks down such as near the magnetic axis. The numerical model is validated against both analytical results as well as other simulation codes. The effects of the poloidally asymmetric Fourier modes of the electric field are discussed, and the contribution of collisional kinetic electrons is studied. In view of subsequent gyrokinetic simulations of turbulence started from a neoclassical equilibrium, the problem of numerical noise inherent to the particle-in-cell approach is addressed. A novel algorithm for collisional gyrokinetic simulation switching between a local and a canonical Maxwellian background for, respectively, carrying out the collisional and collisionless dynamics is proposed, and its beneficial effects together with a coarse graining procedure [Y. Chen and S. E. Parker, Phys. Plasmas 14, 082301 (2007)] on noise and weight spreading reduction are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Metal nano-grids for transparent conduction in solar cells

A general procedure for predicting metal grid performance in solar cells was developed. Unlike transparent conducting oxides (TCOs) or other homogeneous films, metal grids induce more resistance in the neighbor layer. The resulting balance of transmittance, neighbor and grid resistance was explored in light of cheap lithography advances that have enabled metal nano-grid (MNG) fabrication. The patterned MNGs have junction resistances and degradation rates that are more favorable than solution-synthesized metal nanowires. Neighbor series resistance was simulated by the finite element method, although a simpler analytical model was sufficient in most cases. Finite-difference frequency-domain transmittance simulations were performed for MNGs with minimum wire width (w) of 50 nm, but deviations from aperture transmittance were small in magnitude. Depending on the process, MNGs can exhibit increased series resistance as w is decreased. However, numerous experimental reports have already achieved transmittance-MNG sheet resistance trade-offs comparable to TCOs. The transmittance, neighbor and MNG series resistances were used to parameterize a grid fill factor for a solar cell. In conclusion, this new figure of merit was used to demonstrate that although MNGs have only been employed in low efficiency solar cells, substantial gains in performance are predicted for decreased w in all high efficiency absorber technologies.

14 SOLAR ENERGY↗

Quantifying selective solvent transport under an electric field in mixed-solvent electrolytes

Electrolytes in lithium-ion batteries comprise solvent mixtures, but analysis of ion transport is always based on treating the solvents as a single-entity. We combine electrophoretic NMR (eNMR) measurements and molecular dynamics (MD) simulations to quantify electric-field-induced transport in a concentrated solution containing LiPF 6 salt dissolved in an ethylene carbonate/ethyl methyl carbonate (EC/EMC) mixture. The selective transport of EC relative to EMC is reflected in the difference between two transference numbers, defined as the fraction of current carried by cations relative to the velocity of each solvent species. This difference arises from the preferential solvation of cations by EC and its dynamic consequences. The simulations reveal the presence of a large variety of transient solvent-containing clusters which migrate at different velocities. Rigorous averaging over different solvation environments is essential for comparing simulated and measured transference numbers. Our study emphasizes the necessity of acknowledging the presence of four species in mixed-solvent electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerically optimized structures for dielectric asymmetric dual-grating laser accelerators

Optical scale dielectric structures are promising candidates to realize future compact, low cost particle accelerators, since they can sustain high acceleration gradients in the range of GeV/m. Here, we present numerical simulation results for a dielectric asymmetric dual-grating accelerator. It was found that the asymmetric dual-grating structures can efficiently modify the laser field to synchronize it with relativistic electrons, therefore increasing the average acceleration gradient by ∼10% in comparison to symmetric structures. The optimum pillar height which was determined by simulation agrees well with that estimated analytically. The effect of the initial kinetic energy of injected electrons on the acceleration gradient is also discussed. Finally, the required laser parameters were calculated analytically and a suitable laser is proposed as energy source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantitative analysis of time-resolved microwave conductivity data

Flash-photolysis time-resolved microwave conductivity (fp-TRMC) is a versatile, highly sensitive technique for studying the complex photoconductivity of solution, solid, and gas-phase samples. The purpose of this paper is to provide a standard reference work for experimentalists interested in using microwave conductivity methods to study functional electronic materials, describing how to conduct and calibrate these experiments in order to obtain quantitative results. The main focus of the paper is on calculating the calibration factor, K, which is used to connect the measured change in microwave power absorption to the conductance of the sample. We describe the standard analytical formulae that have been used in the past, and compare them to numerical simulations. This comparison shows that the most widely used analytical analysis of fp-TRMC data systematically under-estimates the transient conductivity by ~60%. We suggest a more accurate semi-empirical way of calibrating these experiments. However, we emphasize that the full numerical calculation is necessary to quantify both transient and steady-state conductance for arbitrary sample properties and geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An improved mixing model providing joint statistics of scalar and scalar dissipation

For the calculation of nonpremixed turbulent flames with thin reaction zones the joint probability density function (PDF) of the mixture fraction and its dissipation rate plays an important role. The corresponding PDF transport equation involves a mixing model for the closure of the molecular mixing term. Here, the parameterized scalar profile (PSP) mixing model is extended to provide the required joint statistics. Model predictions are validated using direct numerical simulation (DNS) data of a passive scalar mixing in a statistically homogeneous turbulent flow. Comparisons between the DNS and the model predictions are provided, which involve different initial scalar-field lengthscales. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the connection between nonmonotonic taste behavior and molecular conformation in solution: The case of rebaudioside-A

The diterpene steviol glycoside, rebaudioside A, is a natural high potency non-caloric sweetener extracted from the leaves of Stevia rebaudiana. This compound shows a parabolic change in sweet taste intensity with temperature which contrasts with the general finding for other synthetic or natural sweeteners whose sweet taste increases with temperature. The nonmonotonic taste behavior was determined by sensory analysis using large taste panels. The conformational landscape of rebaudioside A was established at a range of temperatures by means of nuclear magnetic resonance and molecular dynamics simulation. The relationship between various conformations and the observed sweetness of rebaudioside A is described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spontaneous electromagnetic fluctuations in a relativistic magnetized electron–positron plasma

Spontaneous fluctuations are a robust phenomenon of plasmas near equilibrium, which does not depend on the existence of instabilities, and their characterization provides valuable information about the role of the relativistic temperatures T∼mc{sup 2} in relativistic regimes. In this paper, we study the broadband spontaneous electromagnetic fluctuations in a relativistic and magnetized pair plasma described by Maxwell–Jüttner distribution functions, based on the fluctuation-dissipation theorem and particle-in-cell simulations. It is shown that the transverse electromagnetic fluctuations are constrained by a temperature-independent critical frequency ω{sub c}=√(Ω{sub c}{sup 2}+(ck){sup 2}), which separates the collisionless damping regime (|ω|<ω{sub c}) from the case where the waves can propagate without damping (|ω|>ω{sub c}). Further, relativistic simulations show an excellent agreement between analytical and numerical results. We expect this formalism to contribute to obtaining useful physical information about the state of relativistic plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlinear development of inertial instability in a barotropic shear

Inertial instability is investigated numerically in a two-dimensional setting in order to understand its nonlinear stage and saturation. To focus on fundamental mechanisms, a simple barotropic shear U(y)=tanh y on the f-plane is considered. The linear stability problem is first solved analytically, and the analytical solutions are used to benchmark numerical simulations. A simple scenario of the nonlinear development of the most unstable mode was recurrently observed in the case of substantial diffusivity: while reaching finite amplitude the unstable mode spreads laterally, distorting the initially vertical instability zone. This process produces strong vertical gradients which are subsequently annihilated by diffusion, making the flow barotropic again but with the shear spread over a wider region. In the course of such evolution, unexpectedly, strong negative absolute vorticity anomalies are produced. In weakly diffusive simulations, the horizontal spreading of the unstable motions and the enhancement of the anticyclonic vorticity extremum persist, but small-scale motions/instabilities render the flow considerably more complex. It is known that the barotropic component of the final state can be predicted from the conservation of momentum. Our simulations confirm the relevance of this simple prediction in the cases investigated regardless of resolution and diffusion. The baroclinic component of the final state is also analyzed and three types of structures are identified: persistent stationary stratification layers, subinertial waves trapped in the anticyclonic shear, and freely propagating inertia-gravity waves. The subinertial waves and the stratification staircase have clear signatures and can therefore help to identify the regions that have undergone inertial instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-RAY BINARY EVOLUTION ACROSS COSMIC TIME

High-redshift galaxies permit the study of the formation and evolution of X-ray binary (XRB) populations on cosmological timescales, probing a wide range of metallicities and star formation rates (SFRs). In this paper, we present results from a large-scale population synthesis study that models the XRB populations from the first galaxies of the universe until today. We use as input to our modeling the Millennium II cosmological simulation and the updated semi-analytic galaxy catalog by Guo et al. to self-consistently account for the star formation history and metallicity evolution of the universe. Our modeling, which is constrained by the observed X-ray properties of local galaxies, gives predictions about the global scaling of emission from XRB populations with properties such as SFR and stellar mass, and the evolution of these relations with redshift. Our simulations show that the X-ray luminosity density (X-ray luminosity per unit volume) from XRBs in our universe today is dominated by low-mass XRBs, and it is only at z {approx}> 2.5 that high-mass XRBs become dominant. We also find that there is a delay of {approx}1.1 Gyr between the peak of X-ray emissivity from low-mass XRBs (at z {approx} 2.1) and the peak of SFR density (at z {approx} 3.1). The peak of the X-ray luminosity from high-mass XRBs (at z {approx} 3.9) happens {approx}0.8 Gyr before the peak of the SFR density, which is due to the metallicity evolution of the universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Additive Manufactured Compact Microwave Absorbers

A high-performance, compact microwave absorber was created using Fused Deposition Modeling (FDM) 3D printing. Both a narrowband and a broadband absorber were created. The narrowband absorber was designed at 4.9 GHz, mid-band in WR-187 waveguide. The broadband absorber tried to achieve the best attenuation across the entire 3.95 to 5.85 GHz band. Two types of carbon loaded polylactic acid (PLA) plastic and one type of unloaded PLA were 3D printed with variable percentages of air to achieve different values of effective dielectric constant and loss tangent. The absorber comprised five or six rectangular pieces of these plastic materials. The thickness and fill factor values for each piece were optimized to minimize reflection through fast analytic modeling in MATLAB®. The results were then verified by HFSS® simulation as well. The stack progressed from the lowest loss and lowest dielectric constant to the highest at the shorting end. The final narrowband load had simulated return loss of 87 dB at 4.9 GHz with an analytic solution in MATLAB. The measured return loss of the 3D printed attenuator was 73 dB at 4.929 GHz. The total length of the absorber was 2.44 inches. A commercial absorber for WR-187 with return loss of 40 dB has length of 13 inches. The experiment proves that an effective and compact microwave absorber can be created using 3D printing.

36 MATERIALS SCIENCE↗

Reduction of Simulation Times for High-Q Structures using the Resonance Equation

Simulating steady state performance of high quality factor (Q) resonant RF structures is computationally difficult for structures with sizes on the order of more than a few wavelengths because of the long times (on the order of ~ 0.1 ms) required to achieve steady state in comparison with maximum time step that can be used in the simulation (typically, on the order of ~ 1 ps). This paper presents analytical and computational approaches that can be used to accelerate the simulation of the steady state performance of such structures. The basis of the proposed approach is the utilization of a larger amplitude signal at the beginning to achieve steady state earlier relative to the nominal input signal. Finally, the methodology for finding the necessary input signal is then discussed in detail, and the validity of the approach is evaluated.

43 PARTICLE ACCELERATORS↗

Performance predictions of a focused ion beam from a laser cooled and compressed atomic beam

Focused ion beams are indispensable tools in the semiconductor industry because of their ability to image and modify structures at the nanometer length scale. Here, we report on performance predictions of a new type of focused ion beam based on photo-ionization of a laser cooled and compressed atomic beam. Particle tracing simulations are performed to investigate the effects of disorder-induced heating after ionization in a large electric field. They lead to a constraint on this electric field strength which is used as input for an analytical model which predicts the minimum attainable spot size as a function of, amongst others, the flux density of the atomic beam, the temperature of this beam, and the total current. At low currents (I < 10 pA), the spot size will be limited by a combination of spherical aberration and brightness, while at higher currents, this is a combination of chromatic aberration and brightness. It is expected that a nanometer size spot is possible at a current of 1 pA. The analytical model was verified with particle tracing simulations of a complete focused ion beam setup. A genetic algorithm was used to find the optimum acceleration electric field as a function of the current. At low currents, the result agrees well with the analytical model, while at higher currents, the spot sizes found are even lower due to effects that are not taken into account in the analytical model.

43 PARTICLE ACCELERATORS↗

The alloying element dependence of the local lattice deformation and the elastic properties of Ni{sub 3}Al: A molecular dynamics simulation

Molecular dynamics (MD) together with the modified analytical embedded atom method (MAEAM) is employed to study the alloying elements (Re, Ru, Co, and Ta) dependence of the elastic properties of L1{sub 2}-Ni{sub 3}Al. The investigations indicate that the calculated elastic properties of Ni{sub 3}Al are in reasonable agreement with the previous results. The substituting formation energies of the alloying elements in Ni{sub 3}Al are calculated to determine the site preference. It is found out that Re, Ru, and Ta atoms prefer to occupy the Al sites, and the Co atom prefers to occupy the Ni site. Based on Re, Ru, and Ta substituting the 1st, 2nd, 3rd, and 4th nearest-neighbor atoms, we ascertain that the substituting manners of these alloying elements have a decisive effect on the bulk modulus and the local crystal lattice of Ni{sub 3}Al. Moreover, for Re, the bonding interaction plays a predominant role in the improvement in the bulk modulus of Ni{sub 3}Al, whereas the size effect of Ru and Ta on the improvement in the bulk modulus is more obvious. Finally, the potential reasons of which the alloying elements enhance the bulk modulus are discussed in details.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗