Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Double epitaxy as a paradigm for templated growth of highly ordered three-dimensional mesophase crystals

Molecular templating and self-assembly are fundamental mechanisms for controlling the morphology of biominerals, while in synthetic two-dimensional layered materials similar levels of control over materials structure can be achieved through the epitaxial relationship with the substrate. In this study these two concepts are combined to provide an approach for the nucleation and growth of three-dimensional ordered mesophases on solid surfaces. A combined experimental and theoretical study revealed how atomic ordering of the substrate controls the structure of surfactant template and the orientation and morphology of the epitaxially grown inorganic material. Such dual epitaxial relationship between the substrate, surfactant template and inorganic mesophase gives rise to a highly ordered porous mesophase with a well-defined cubic lattice of pores. The level of control over material’s three-dimensional architecture achieved in this one-step synthesis is reminiscent to that in biomineralization.

crystal growth↗

Roadrunner

SAND2026-17073O Roadrunner software provides a comprehensive platform for simulating the mechanical behavior of crystalline materials under various loading conditions, allowing users to investigate the effects of dislocation slip hardening and damage evolution. Developed as a fork of the Multiphysics Object Oriented Simulation Environment (MOOSE) software from Idaho National Laboratory, Roadrunner is optimized for high-performance computing and can simulate large-scale problems, enabling researchers to explore complex scenarios. Its applications include material design and optimization in aerospace and automotive industries, investigation of failure mechanisms in structural materials, and development of predictive models for crystalline materials under various loading conditions. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Lim, Hojun [Sandia National Lab. (SNL-CA), Livermo↗

Precursor Derived Nanostructured Si-C-X Materials for Nuclear Applications. Final Report, October 2010 - September 2014

Polymer derived ceramic route is an attractive approach to make structural materials with unique nanostructures that have very desirable high temperature properties. Processing techniques to make a variety of needed shapes and forms (e.g. coatings, matrices for fiber reinforced composites, porous ceramics) have been developed. With appropriate high temperature processing, the precursors can be converted to nano-crystalline materials. In this collaborative project, we investigated the processing, stability and properties of nanostructured Si-C materials, derived from polymeric precursors, and their performance under conditions appropriate for nuclear energy applications. All the milestones of the project were accomplished. Some of the results are being currently analyzed and additional papers being prepared in which support from NEUP will be acknowledged. So far, eight peer-reviewed papers have been published and one invention disclosure made. In this report, we summarize the major findings of this project.

36 MATERIALS SCIENCE↗

Friction Stir Scribe Joining of Carbon Fiber Reinforced Polymer (CFRP) to Aluminum

The purpose of this project was to develop the critical process technology, models, and tools necessary to advance the Friction Stir Scribe, FSS, joining method through experimentation, validation at the laboratory scale, and integration into a production-like robotic environment. Implementation of FSS technology for joining polymer composites to metals will enable greater use of lightweight materials by providing technology capable of joining linear configurations without the use of adhesives or other third-body fasteners by creating an in-situ joint from the parent materials. As FSS technology provides the capability to join multi-material structures on robotic platforms using linear configurations, the development of this technology for use on the BIW will impact a great diversity of CFRP joints within the vehicle; thus, allowing a greater reduction in vehicle mass through more specifically designed structures. The FSS process has been developed to include integration of the FSS tool with a stationary shoulder, which has been shown to be required to achieve the desired surface quality (i.e., crown flash level). However, the targeted joint strength has not been achieved because the resulting stirred CFRP microstructure does not provide similar performance as the as-molded composite leading to low fracture strengths despite our efforts investigating various unique alternative approaches. In support of the experimental work, a process-structure model was developed and validated for the FSS joining (FSSJ) process using surrogate materials (steel and Al). The cyclic corrosion testing of the FSS joints and self-piercing riveted (SPR) joints revealed different modes of galvanic corrosion in the two types of joints. The SPR samples exhibited a greater amount of corrosion on the external surfaces. The presence of steel rivets in these joints exacerbated the situation, with the rivets getting preferentially corroded. The FSSJ samples despite exhibiting less surface corrosion, exhibited severe corrosion under the joint overlap area.

36 MATERIALS SCIENCE↗

Technical and Economic Assessment of Span-Loaded Cargo Aircraft Concepts

The benefits are assessed of span distributed loading concepts as applied to future commercial air cargo operations. A two phased program is used to perform this assessment. The first phase consists of selected parametric studies to define significant configuration, performance, and economic trends. The second phase consists of more detailed engineering design, analysis, and economic evaluations to define the technical and economic feasibility of a selected spanloader design. A conventional all-cargo aircraft of comparable technology and size is used as a comparator system. The technical feasibility is demonstrated of the spanloader concept with no new major technology efforts required to implement the system. However, certain high pay-off technologies such as winglets, airfoil design, and advanced structural materials and manufacturing techniques need refinement and definition prior to application. In addition, further structural design analysis could establish the techniques and criteria necessary to fully capitalize upon the high degree of structural commonality and simplicity inherent in the spanloader concept.

Source record↗

Potential Use of In Situ Material Composites such as Regolith/Polyethylene for Shielding Space Radiation

NASA has an extensive program for studying materials and methods for the shielding of astronauts to reduce the effects of space radiation when on the surfaces of the Moon and Mars, especially in the use of in situ materials native to the destination reducing the expense of materials transport. The most studied material from the Moon is Lunar regolith and has been shown to be as efficient as aluminum for shielding purposes (1). The addition of hydrogenous materials such as polyethylene should increase shielding effectiveness and provide mechanical properties necessary of structural materials (2). The neutron radiation shielding effectiveness of polyethylene/regolith stimulant (JSC-1A) composites were studied using confluent human fibroblast cell cultures exposed to a beam of high-energy spallation neutrons at the 30deg-left beam line (ICE house) at the Los Alamos Neutron Science Center. At this angle, the radiation spectrum mimics the energy spectrum of secondary neutrons generated in the upper atmosphere and encountered when aboard spacecraft and high-altitude aircraft. Cell samples were exposed in series either directly to the neutron beam, within a habitat created using regolith composite blocks, or behind 25 g/sq cm of loose regolith bulk material. In another experiment, cells were also exposed in series directly to the neutron beam in T-25 flasks completely filled with either media or water up to a depth of 20 cm to test shielding effectiveness versus depth and investigate the possible influence of secondary particle generation. All samples were sent directly back to JSC for sub-culturing and micronucleus analysis. This presentation is of work performed in collaboration with the NASA sponsored Center for Radiation Engineering and Science for Space Exploration (CRESSE) at Prairie View A&M.

Theriot, Corey A.↗

Structural Genomics: From Genes to Structures With Valuable Materials And Many Questions in Between

The Protein Structure Initiative (PSI), funded by the US National Institutes of Health (NIH), provides a framework for the development and systematic evaluation of methods to solve protein structures. Although the PSI and other structural genomics efforts around the world have led to the solution of many new protein structures as well as the development of new methods, methodological bottlenecks still exist and are being addressed in this 'production phase' of PSI.

59 BASIC BIOLOGICAL SCIENCES↗

Learning surface molecular structures via machine vision

Recent advances in high resolution scanning transmission electron and scanning probe microscopies have allowed researchers to perform measurements of materials structural parameters and functional properties in real space with a picometre precision. In many technologically relevant atomic and/or molecular systems, however, the information of interest is distributed spatially in a non-uniform manner and may have a complex multi-dimensional nature. One of the critical issues, therefore, lies in being able to accurately identify (‘read out’) all the individual building blocks in different atomic/molecular architectures, as well as more complex patterns that these blocks may form, on a scale of hundreds and thousands of individual atomic/molecular units. Here we employ machine vision to read and recognize complex molecular assemblies on surfaces. Specifically, we combine Markov random field model and convolutional neural networks to classify structural and rotational states of all individual building blocks in molecular assembly on the metallic surface visualized in high-resolution scanning tunneling microscopy measurements. We show how the obtained full decoding of the system allows us to directly construct a pair density function—a centerpiece in analysis of disorder-property relationship paradigm—as well as to analyze spatial correlations between multiple order parameters at the nanoscale, and elucidate reaction pathway involving molecular conformation changes. Here, the method represents a significant shift in our way of analyzing atomic and/or molecular resolved microscopic images and can be applied to variety of other microscopic measurements of structural, electronic, and magnetic orders in different condensed matter systems.

36 MATERIALS SCIENCE↗

Intrinsic electrostatic effects in nanostructured ceramics

Using atomic-level calculations with empirical potentials, we have found that electrostatic dipoles can be created at grain boundaries formed from nonpolar surfaces of fluorite-structured materials. In particular, the SIGMA5(310)/[001] symmetric tilt grain boundary reconstructs to break the symmetry in the atomic structure at the boundary, forming the dipole. This dipole results in an abrupt change in electrostatic potential across the boundary. In multilayered ceramics composed of stacks of grain boundaries, the change in electrostatic potential at the boundary results in profound electrostatic effects within the crystalline layers, the nature of which depends on the electrical boundary conditions. For open-circuit boundary conditions, layers with either high or low electrostatic potential are formed. By contrast, for short-circuit boundary conditions, electric fields can be created within each layer, the strength of which then depend on the thickness of the layers. These electrostatic effects have important consequences for the behavior of defects and dopants within these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revealing High-Temperature Reduction Dynamics of High-Entropy Alloy Nanoparticles via In Situ Transmission Electron Microscopy

Understanding the behavior of high-entropy alloy (HEA) materials under hydrogen (H 2 ) environment is of utmost importance for their promising applications in structural materials, catalysis, and energy-related reactions. Herein, the reduction behavior of oxidized FeCoNiCuPt HEA nanoparticles (NPs) in atmospheric pressure H-2 environment was investigated by in situ gas-cell transmission electron microscopy (TEM). The reduction reaction front was maintained at the external surface of the oxide. During reduction, the oxide layer expanded and transformed into porous structures where oxidized Cu was fully reduced to Cu NPs while Fe, Co, and Ni remained in the oxidized form. In situ chemical analysis showed that the expansion of the oxide layer resulted from the outward diffusion flux of all transition metals (Fe, Co, Ni, Cu). Revealing the H-2 reduction behavior of HEA NPs facilitates the development of advanced multicomponent alloys for applications targeting H 2 formation and storage, catalytic hydrogenation, and corrosion removal.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Demonstration of Wide Area Radiological Decontamination and Mitigation Technologies for Building Structures and Vehicles - 16508

Researchers at the U.S. Environmental Protection Agency in collaboration with the Department of Homeland Security conducted the 'Wide-Area Urban Radiological Contaminant, Mitigation, and Clean-Up Technology Demonstration' in Columbus, Ohio on June 22-25, 2015. EPA's National Homeland Security Research Center (NHSRC) demonstrated five wide-area radiological decontamination technologies (including strippable coatings, gels, and chemical foam technologies) on an urban building. Decontamination technologies were applied to remove the contaminants from the building's surfaces by physical, chemical, or other methods, which in practice could reduce radiation exposure level. In addition, NHSRC teamed with the Department of Homeland Security (DHS) to demonstrate several radiological contaminant mitigation technologies including building and vehicle wash technologies, as well as several approaches to contain wash water and radioactive particles. 'Radiological contaminant mitigation' technologies are measures taken to reduce adverse impacts of radiological contamination on people and the environment, and facilitate such purposes as restoration of first responder services and critical infrastructure. Radiological contaminant mitigation technologies are designed for containing and removing radiological contamination on the surface in the first hours or days following a radiological event (early phase response). Such technologies include 'radiological particle containment', which is design to prevent the spread of particles which might result from vehicle or foot traffic. Radiological particle containment technologies are applicable for early phase response to contain the radionuclides and to reduce radiation dose to responders and the public. Mitigation also includes 'gross decontamination' technologies, which perform a type of decontamination that is conducted with the goal of reducing contamination levels. This reduction may not meet final cleanup levels, but may be useful to mitigate some public hazard or contain contamination. The purpose of the demonstrations was to educate potential end-users and stakeholders of this technology about a 'Toolbox of Options' for radiological decontamination, as well as radiological contaminant mitigation. Both demonstrations were conducted using a 75-year old brick building and the surrounding area (including parking lots) in Columbus, OH. No radioactive contaminants were applied during either demonstration, as the objective was to duplicate and implement realistic operational conditions for these technologies. Surrogate contaminants such as particle tracers were used in several demonstrations. The decontamination technologies were used in a scaled-up setting with application to the building. Contaminant mitigation technologies were demonstrated on the building as well as on vehicles. Example technology application techniques/accessories included an articulating boom lift, repelling boatswain chair, stand-alone surface material structures, high-volume foam applicators, fire truck foam applicator, a vehicle wash tent for vehicles, particle tracers to simulate radiological contaminants, and high- and low-technology liquid containment approaches. Results and stakeholder observations from the demonstration are now publically in a report entitled 'Technical Report for the Demonstration of Radiological Decontamination and Mitigation Technologies for Building Structures and Vehicles' available at http://www.epa.gov/hsresearch Example information that was obtained included decontamination rate, contaminant mitigation and containment capacity, user friendliness of each technology, the required utilities (electric, water, etc.) for each technology, skill of worker required, and the cost. The condition (color, texture, integrity, etc.) of each building material present on the structure along with all structural components such as gutters, windows, doors, etc. were carefully examined and documented. All demonstrations were open to individuals, organizations, and local, state, federal, tribal, and international governments who may be involved with implementing or planning radiological incident response. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synchrotron based transient x-ray absorption spectroscopy for emerging solid-state energy materials

The rational design of cutting-edge materials for an efficient solar energy conversion process is a challenging task, which demands a fundamental understanding of the mechanisms operative during the photoinduced physical and chemical reactions. In response to these issues, progress in the field has steered attention toward the use of time-resolved spectroscopic techniques to resolve the multiple intermediate species involved in these photoinduced reactions. Thanks to the advent of pump–probe technique, which leads to the development of various time-resolved spectroscopic methods, significant progress has been made in understanding the photophysical and photochemical properties (e.g., excited state dynamics, charge transfer mechanism, charge separation dynamics, etc.) of energy materials. Synchrotron-based x-ray transient absorption (XTA) spectroscopy is one of the most important time-resolved techniques to unravel the direct correlation of the material structure with their photophysical properties owing to its unique capability in directly observing electronic and structural evolution simultaneously. As a result, the aim of this work is to provide a systematic overview of the recent progress in using XTA for capturing the structural dynamics associated with excited state and charge separation dynamics in emerging solid-state energy materials.

14 SOLAR ENERGY↗

Mechanical properties and permeability of hydrogen isotopes through CrNi35WTiAl alloy, containing radiogenic helium

The long-term contact of structural materials (SM) with tritium-containing media makes their properties in terms of kinetic permeability of hydrogen isotopes change. This change is the consequence of the defect formation in SM due to the result of {sup 3}He build-up generated by the radioactive decay of tritium dissolved in SM. This paper presents the experimental results concerning the permeability of hydrogen isotopes through CrNi35WTiAl alloy containing {sup 3}He and the impact of the presence of {sup 3}He and H on its mechanical properties. Tensile tests of cylindrical samples containing various concentrations of {sup 3}He (90, 230 and 560 appm) have been performed in inert and hydrogen atmospheres. The build-up of {sup 3}He has been made using the 'helium trick' technique. The maximal decrease in the plastic characteristics of the CrNi35WTiAl alloy occurs in samples with the highest {sup 3}He (560 appm) content at 873 K. The permeability of deuterium through the CrNi35WTiAl alloy in the initial state and that with 560 appm of {sup 3}He content was explored. The presence of this {sup 3}He concentration has shown an increase in deuterium permeability, evidently due to structural changes in the material under the impact of radiogenic helium.

36 MATERIALS SCIENCE↗

Li{sub x}Co{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} electrode materials: Electrochemical and structural studies

Graphical abstract: Evolution of the c{sub hex.}/a{sub hex.} ratio with x in LiCo{sub 1−2x}Mn{sub x}Ni{sub x}O{sub 2} solid solution showing that less Li/Ni disorder is observed for x < 0.4. Highlights: ► LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} is a member of the LiCo{sub 1−2x}Ni{sub x}Mn{sub x}O{sub 2} solid solution. ► Structural refinement of this cathode material shows no Li/Ni disorder. ► The rhombohedral symmetry was preserved upon lithium removal. ► The discharge capacity reached more than 140 mAh/g at 2C rate and 160 mAh/g at 1C. -- Abstract: LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} layered oxide in a member of the LiCo{sub 1−2x}Ni{sub x}Mn{sub x}O{sub 2} solid solution between LiCoO{sub 2} and LiNi{sub 0.5}Mn{sub 0.5}O{sub 2}. Compositions from this solid solution have attracted much attention and have been extensively studied as promising cathode candidates to replace the most popular LiCoO{sub 2} cathode material used in the commercial lithium-ion batteries (LiBs). LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} positive electrode material was prepared via the combustion method followed by a thermal treatment at 900 °C for 12 h. This material was characterized by a high homogeneity and a granular shape. The Rietveld refinement evidenced that the structure of this compound exhibits no Ni/Li disorder revealing that the LiCo{sub 1−2x}Ni{sub x}Mn{sub x}O{sub 2} system presents the ideal structure for LiBs application when x < 0.4. The electrochemical performances of the LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} sample were measured at different current rates in the 2.7–4.5 V potential range. Its discharge capacity reached 178, 161 and 145 mAhg{sup −1} at C/20, 1C and 2C, respectively. Structural changes in LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} upon delithiation were studied using ex situ X-ray diffraction. A continuous solid solution with a rhombohedral symmetry was detected in the whole composition range. This structural stability during the cycling combined with the obtained electrochemical features make this material convenient for the LiBs applications.

36 MATERIALS SCIENCE↗

First-principles study of mechanical properties of zirconium alloys and hydrides

Zirconium alloys have been extensively used as fuel cladding materials in nuclear light water reactors (LWRs) due to their favorable mechanical properties, corrosion resistance, low thermal neutron capture cross section and criticality. Because the main functions of these structural materials are to maintain the integrity of UO{sub 2} fuel rods and prevent the release of fission products into the biosphere, a detailed knowledge of their structural stability is of critical importance to ensure the safe operation of nuclear reactors, and the safety of storage, transportation or disposition of used nuclear fuel assemblies. While the Zr-H phase diagram has been known since the 1950's and has remained largely unchanged, the structures, formation mechanisms, and stability of Zr-hydride phases in pure α-Zr or Zr alloys matrices have been subjects of much debate over the last few decades. The formation of hydride phases in the Zr matrix has been linked in previous studies to the degradation of mechanical properties of Zr/Zr-alloys materials. Therefore, an accurate knowledge of the interplay between the structures, stability and mechanical properties of Zr/Zr-alloys and Zr hydrides is of paramount significance to ensure materials reliability during their in- service lifetime. Despite few first-principles studies have investigated the mechanical stability of Zr hydrides polymorphs proposed so far, no ab initio studies have been carried out, to the best of our knowledge, on the mechanical properties of modern nuclear-grade zirconium alloys such as Zircaloy-4 (Zry-4; 1.2-1.7% Sn), Zirconium low oxidation alloy (ZIRLO; 0.7-1.0% Sn and ∼1.0% Nb), or M5 alloy (0.8-1.2% Nb). Therefore, it is important to carry out a series of first-principles calculations systematically to investigate the structure-property relationship of zirconium hydrides and zirconium alloys, that can help explain differences in elastic properties between high-purity zirconium and nuclear-grade zirconium alloys. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Designer Metal–Organic Frameworks for Size–Exclusion–Based Hydrocarbon Separations: Progress and Challenges

The separation of hydrocarbons is of primary importance in the petrochemical industry but remains a challenging process. Hydrocarbon separations have traditionally relied predominantly on costly and energy intensive heat-driven procedures such as low temperature distillations. Adsorptive separation based on porous solids represents an alternative technology that is potentially more energy efficient for the separation of some hydrocarbons. Great efforts have been made recently not only on the development of adsorbents with optimal separation performance but also towards the subsequent implementation of adsorption-based separation technology. Emerging as a relatively new class of multifunctional porous materials, metal-organic frameworks hold substantial promise as adsorbents for highly efficient separation of hydrocarbons. This is because of their exceptional and intrinsic porosity tunability which enables size-exclusion based separations that render the highest possible separation selectivity. In this review, we highlight the recent advances in the development of MOFs for separation of selected groups of hydrocarbons, including methane/C2 hydrocarbons, normal alkanes, alkane isomers, alkane/alkene/alkyne, and C8 alkylaromatics, with a particular focus on separations based on size-exclusion mechanism. Insights into tailor-made structures, material design strategies, and structure-property relations will be elucidated. In addition, the existing challenges and possible future directions of this important research field will be discussed.

36 MATERIALS SCIENCE↗

Mapping 3D grain and precipitate structure during in situ mechanical testing of open-cell metal foam using micro-computed tomography and high-energy X-ray diffraction microscopy

Open-cell metal foams are ultra-low-density cellular metals with complex hierarchical structures that span bulk, cell, ligament, and sub-ligament scales and give rise to desirable properties such as high strength-to-weight ratio and excellent energy absorption. Although literature suggests that intrinsic material structures at sub-ligament length scales (e.g., grains and precipitates) play an important role in mechanical behavior of open-cell metal foams, there are very few experimental measurements of such structures in three dimensions and for meaningful volumes of foam. This study seeks to map and track the three-dimensional (3D) grain and precipitate structures of an intact volume of open-cell aluminum foam by advancing microstructural characterization techniques that leverage X-ray micro-computed tomography (μCT) and far-field high-energy X-ray diffraction microscopy (FF-HEDM). A 6%-relative-density aluminum foam sample was mechanically tested in compression while μCT and FF-HEDM measurements were collected at interrupted loading states at beamline 1-ID of the Advanced Photon Source. Further, a new scanning strategy and reconstruction algorithm were established to enable characterization of a foam volume with diameter approximately four times wider than the nominal width of the X-ray beam. The result is a set of maps that detail both the 3D grain and precipitate structures throughout the foam volume at successive strain steps. A novel grain tracking procedure was developed to track individual grains within the foam volume by accounting for the large rigid-body motions that individual ligaments can undergo during mechanical loading. The ability to track grains and precipitate structures in three dimensions throughout large bulk deformation of ultra-low-density polycrystalline materials enables new possibilities for validating numerical models and investigating local failure mechanisms. Furthermore, the methods and procedures developed in this study could be applied to other ultra-low-density structures, such as additively manufactured lattices.

36 MATERIALS SCIENCE↗

Thermal-stress-free fasteners for joining orthotropic materials

Hot structures fabricated from orthotropic materials are an attractive design option for future high speed vehicles. Joining subassemblies of these materials with standard cylindrical fasteners can lead to loose joints or highly stressed joints due to thermal stress. A method has been developed to eliminate thermal stresses and maintain a tight joint by shaping the fastener and mating hole. This method allows both materials (fastener and structure), with different coefficients of thermal expansion (CTEs) in each of the three material directions, to expand freely with temperature yet remain in contact. For the assumptions made in the analysis, the joint will remain snug, yet free of thermal stress at any temperature. Finite element analysis was used to verify several thermal-stress-free fasteners and to show that conical fasteners, which are thermal-stress-free for isotropic materials, can reduce thermal stresses for transversely isotropic materials compared to a cylindrical fastener. Equations for thermal-stress-free shapes are presented and typical fastener shapes are shown.

Blosser, M. L.↗