Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

The effect of He plasma treatment on properties of organosilicate glass low-k films

The effect of low-pressure He plasma on properties of nanoporous organosilicate glasses low-k films with 24% and 33% open porosity is studied. The influence of ions, VUV radiation, and metastable atoms are extracted separately using a special experimental system designed for this purpose. The low-k films treated in He plasma were exposed to O or H atoms in the downstream of high-pressure O{sub 2} or H{sub 2} rf discharge. The changes in chemical composition and structure occurring in low-k films were measured before and after all treatments. The loss probabilities of oxygen and hydrogen atoms on the low-k film surface were measured for both treated and pristine films. It is shown that the film pretreatment in He plasma leads to the noticeable densification of the top surface layer up to complete sealing all the films studied. The sealing layer prevents O atoms from deep penetration to the film bulk and carbon extraction. The sealing mechanism related to the joint impact of low-energy ions and VUV photons with metastable atoms in He plasma is discussed in detail.

36 MATERIALS SCIENCE↗

Anisotropy and shear-velocity heterogeneities in the upper mantle

Long-period surface waves are used to map lateral heterogeneities of velocity and anisotropy in the upper mantle. The dispersion curves are expanded in spherical harmonics up to degree 6 and inverted to find the depth structure. The data are corrected for the effect of surface layers and both Love and Rayleigh waves are used. Shear wave velocity and shear polarization anisotropy can be resolved down to a depth of about 450 km. The shear wave velocity distribution to 200 km depth correlates with surface tectonics, except in a few anomalous regions. Below that depth the correlation vanishes. Cold subducted material shows up weakly at 350 km as fast S-wave anomalies. In the transition region a large scale pattern appears with fast mantle in the South-Atlantic. S-anisotropy at 200 km can resolve uprising or downwelling currents under some ridges and subduction zones. The Pacific shows a NW-SE fabric.

Nataf, H.-C.↗

Surface Design and Engineering Toward Wear-Resistant, Self-Lubricant Diamond Films and Coatings

This chapter describes three studies on the surface design, surface engineering, and tribology of chemical-vapor-deposited (CVD) diamond films and coatings toward wear-resistant, self-lubricating diamond films and coatings. Friction mechanisms and solid lubrication mechanisms of CVD diamond are stated. Effects of an amorphous hydrogenated carbon on CVD diamond, an amorphous, nondiamond carbon surface layer formed on CVD diamond by carbon and nitrogen ion implantation, and a materials combination of cubic boron nitride and CVD diamond on the adhesion, friction, and wear behaviors of CVD diamond in ultrahigh vacuum are described. How surface modification and the selected materials couple improved the tribological functionality of coatings, giving low coefficient of friction and good wear resistance, is explained.

Miyoshi, Kazuhisa↗

Astrobiological Journeys to and from the South Polar Sea of Enceladus - Bidirectional Interactions with the Saturn Magnetosphere

The spectacularly cryovolcanic moon Enceladus is a major source of plasma for the Saturn magnetosphere via ionization of the ejected molecular species and ice grains. Field-aligned plasma flows from the Enceladus environment visibly impact the moon's magnetic footpoint in Saturn's polar auroral region, while water group and other ions from the moon emissions diffuse radially throughout the magnetosphere and may be the dominant source of oxygen for Titan's oxygen-poor upper atmosphere. But the moon-magnetosphere interaction is bidirectional in the sense that the moon surface is globally exposed to constant irradiation by the returning magnetospheric ions and by energetic electrons from the field-aligned and radially diffusing populations. The returning ion source operates both on global scales of the magnetosphere and locally for highly reactive species produced in the ejecta plume. All of these sources likely combine to produce a highly oxidized global surface layer. Since plasma electrons and ions are cooled by interaction with neutral gas and E-ring ice grains from Enceladus, the moon emissions have a governing effect on the seed populations of energetic particles that irradiate the surface. The proposed subsurface polar sea and transient crustal overturn in the south polar region could bring the polar surface oxidants into contact with hydrocarbons and ammonia to make oxidation product gases contributing to the cryovolcanic jets, a process first proposed by Cooper et al. (Plan. Sp. Sci., 2009). As has been previously suggested for Europa, the 'oxidants could contribute to enhanced astrobiological potential of Enceladus, perhaps even higher than for Europa where organic hydrocarbons have not yet been directly detected. Unlike Europa, Enceladus shows no sign of an oxygen-dominated exosphere that could otherwise be indicative of extreme surface and interior oxidation inhibiting the detectable survival and evolution of complex organics.

Cooper, John F.↗

The Strata-l Experiment on Microgravity Regolith Segregation

The Strata-1 experiment studies the segregation of small-body regolith through long-duration exposure of simulant materials to the microgravity environment on the International Space Station (ISS). Many asteroids feature low bulk densities, which implies high values of porosity and a mechanical structure composed of loosely bound particles, (i.e. the "rubble pile" model), a prime example of a granular medium. Even the higher-density, mechanically coherent asteroids feature a significant surface layer of loose regolith. These bodies will evolve in response to very small perturbations such as micrometeoroid impacts, planetary flybys, and the YORP effect. A detailed understanding of asteroid mechanical evolution is needed in order to predict the surface characteristics of as-of-yet unvisited bodies, to understand the larger context of samples from sample return missions, and to mitigate risks for both manned and unmanned missions to asteroidal bodies. Due to observation of rocky regions on asteorids such as Eros and Itokawa, it has been hypothesized that grain size distribution with depth on an asteroid may be inhomogeneous: specifically, that large boulders have been mobilized to the surface. In terrestrial environments, this size-dependent sorting to the surface of the sample is called the Brazil Nut Effect. The microgravity and acceleration environment on the ISS is similar that of a small asteroid. Thus, Strata-1 investigates size segregation of regolith in an environment analogous to that of small bodies. Strata-1 consists of four regolith simulants in evacuated tubes, as shown in Figure 1 (Top and Middle). The simulants are (1) a crushed and sieved ordinary chondrite meteorite to simulate an asteroidal surface, (2) a carbonaceous chondrite simulant with a mixture of fine and course particles, and two simplified silicate glass simulants; (3) one with angular and (4) another with spherical particles. These materials were chosen to span a range of granular complexity. The materials were sorted into three size species pre-launch, and maintained during launch and return by a device called the Entrapulator. The hypothesis under test is that the particles that constitute a granular medium in a micro-gravity environment, subjected to a known vibration environemnt, will segregate in accordance to modeled predictions. Strata-1 is currently operating on ISS, with cameras capturing images of simulant motion throughout the one year mission. Vibration data is recorded and downlinked, and the simulants will be analyzed after return to Earth.

Fries, M.↗

On the location and stability of charge in SiO{sub 2}/SiN{sub x} dielectric double layers used for silicon surface passivation

Dielectric double layers of thermal silicon dioxide–chemical vapour deposition (CVD) silicon nitride are found to produce excellent passivation of silicon surfaces by combining a chemical reduction of surface defect states, with a field effect reduction of carriers at the surface due to charge in the dielectrics. The charge present in such double-layers has previously been attributed to be characteristic of the interface between the two. However, experimental evidence shows this is indirect and inconclusive. This manuscript reports direct measurements that show the charge lies within 10 nm of the interface between passivating double layers of thermal silicon dioxide–plasma CVD silicon nitride. In addition, the passivation efficiency of oxide-nitride layers, deposited using optimised conditions, was found to be largely unaffected by extra charge subsequently added to the film. The passivation efficiency of textured surfaces or those produced using non-optimised deposition conditions is found to be highly dependent on the field effect component provided by extra deposited charge. Using such extra field effect component, surface recombination velocities <2 cm/s have been obtained on single oxide and oxide/nitride double layers. The extra deposited charge was found to have good long term stability when the dielectric films are submitted to a chemical treatment. By contrast, poor stability of the deposited charge was observed when subjected to ultraviolet radiation. These results point to the importance of the interface between dielectrics when considering how to optimise the charge present in passivating dielectric films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Dose of Nitrogen-Ion Implantation on the Concentration of Point Defects Introduced into GaAs Layers

Secondary-ion mass spectrometry and Rutherford proton backscattering have been used to measure the concentration profiles of nitrogen atoms and examine the defect structure of epitaxial GaAs layers implanted with 250-keV N{sup +} ions at doses of 5 × 10{sup 14}–5 × 10{sup 16} cm{sup –2}. It was found that no amorphization of the layers being implanted occurs at doses exceeding the calculated amorphization threshold, a concentration of point defects that is formed is substantially lower than the calculated value, and a characteristic specific feature of the defect concentration profiles is the high defect concentration in the surface layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Magnetic Properties Of Aggregate Polycrystalline Diamond: Implications For Carbonado Petrogenesis

Carbonados are a type of diamond, which are made up of many aggregrates of small crystalline diamonds or microdiamonds. The term "carbonado" comes from the Portuguese word carbonated. They are only found in sedimentary deposits in the Central African Republic (CAR) and the Bahia Province of Brazil. They were once the source of the world's supply of industrial diamonds. Their origin is uncertain but several mutually exclusive hypotheses have been proposed. This theories are: (1) extraterrestrial, that is they formed from the dust cloud of original solar nebulae; (2) produced by the high temperatures and pressures of the Earth's mantle; (3) or as the result of an extra-terrestrial impact into a carbon rich layer of sediment. Our study was done to further the understanding of their origin. We measured the magnetic properties on some twenty samples from the CAR. An earlier study was done on whole samples of carbonados and the "common" or kimberlitic diamond. Our work differed in that we started at the surface and subsequently removed the surface layers (by days of acid immersion) into the interior; measuring the magnetic properties at each interval. This procedure permits us to monitor the distribution of magnetic substances within the samples. Our results showed that the magnetic carriers are distributed on the surface including the open pores and that the carbonado interior is essentially non-magnetic. This result suggests that the initial formation environment was deficient in magnetic particles. Such a situation could indicate that their formation was the result of an extra-terrestrial body impacting carbon-rich sediment. Obviously, more work will be required on isotopic and chemical analyses before a more detailed ori-in can be determined.

Kleteschka, Gunther↗

Electro-carburization of mild steel through two-step reaction in molten-salt electrolyte

The rapid carburization of mild steel is demonstrated via the electrochemical deposition of solid carbon, followed by thermochemical iron-carbon (Fe-C) reaction using a molten lithium-potassium carbonate (LiKCO 3 ) salt electrolyte and carbon dioxide as the carbon source. Depth-dependent microstructural and compositional changes in the steel are shown to be controlled by the applied cell voltage and reaction temperatures. Reaction temperatures above the Fe-C eutectoid temperature promote faster carburization due to carbon dissolution into austenite. The carbon deposition rate is regulated by the applied cell voltage: At - 2.4 V, carbon deposition occurs much faster than its diffusion into the steel, resulting in the accumulation of a carbon-rich layer exceeding 1 mm, which does not diffuse into the steel. In contrast, at - 1.8 V, all deposited carbon effectively diffuses into the steel, leaving a minimal external deposit. In both cases, carbon ingress forms a carbide-rich surface layer and precipitates additional carbides along the grain boundaries within the steel electrode. This method offers a potential approach to increase the carbon content of mild or low-carbon steel feedstocks, such as scrap or direct reduced iron, for industrial applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical edge effect induced photocurrent overestimation in low-light organic photovoltaics

In many literatures, the short-circuit current (J SC ) of indoor organic photovoltaics is overestimated, leading to severely wrong device performance evaluation and analysis. In this work, based on the equivalent circuit model, we demonstrate that electrical edge effect is sensitive to both transverse surface resistance and light intensity. At low light intensity, the electrical edge effect could lead to J SC being significantly overestimated, i.e., by 100% and even more. We show that for a PM6:Y6 device capped with a MoOX layer, when measured under 0.01 sun, the usually overlooked interface doping mechanism would lead to J SC and PCE overestimation by 51% and 15%, respectively. Besides, we show that the magnitude of J SC overestimation drastically increases with high photoactive-layer surface roughness. This work emphasized the significant electrical edge effect on J SC evaluations for low-light solar cells and is conducive to understanding the intrinsic mechanism of edge effect, promoting a healthier development of organic photovoltaics.

14 SOLAR ENERGY↗

In situ transmission electron microscopy observation of ZnO polar and non-polar surfaces structure evolution under electron beam irradiation

In this paper, using in situ transmission electron microscopy, we investigated the dynamic reconstruction and evolution of ZnO polar and non-polar surfaces under high-energy electron beam irradiation. Electron beam radiolysis creates oxygen vacancies and a Zn rich (0001) surface. Positive polar charges at the (0001) surface expel loosely bonded Zn ions to diffuse away from the (0001) polar surface. As a result, mass loss was observed around the (0001) surface. Dehydration by the electron beam breaks the charge balance on the ( 000 1 ¯ ) polar surface. The negative charges on the ( 000 1 ¯ ) surface suppress the radiolysis effect and further absorb Zn ions to the surface to neutral the polar charges. The ideal stacking sequences of Zn ions in hexagonal ZnO structure can be considered as ABAB… along its c axis, while the absorbed individual Zn ion on the ( 000 1 ¯ ) surface occupies the C site to form three bonds with surface O ions beneath, instead of one bond in the ideal structure. With more Zn ion absorption and surface oxidization, new nanocrystals grow up from the ( 000 1 ¯ ) polar surface. Finally, new nanocrystals nucleated at the ( 01 1 ¯ 0 ) non-polar surface are driven by the electric field of the polar charges as well, for the Zn ions were always observed to absorb on the negatively charged [ 000 1 ¯ ] end of the newly formed ( 01 1 ¯ 0 ) surface layer.

74 ATOMIC AND MOLECULAR PHYSICS↗

An impact-induced terrestrial atmosphere and iron-water reactions during accretion of the Earth

Shock wave data and theoretical calculations were used to derive models of an impact-generated terrestrial atmosphere during accretion of the Earth. The models showed that impacts of infalling planetesimals not only provided the entire budget of terrestrial water but also led to a continuous depletion of near-surface layers of water-bearing minerals of their structural water. This resulted in a final atmospheric water reservoir comparable to the present day total water budget of the Earth. The interaction of metallic iron with free water at the surface of the accreting Earth is considered. We carried out model calcualtions simulating these processes during accretion. It is assumed that these processes are the prime source of the terrestrial FeO component of silicates and oxides. It is demonstrated that the iron-water reaction would result in the absence of atmospheric/hydrospheric water, if homogeneous accretion is assumed. In order to obtain the necessary amount of terrestrial water, slightly heterogeneous accretion with initially 36 wt% iron planetesimals, as compared with a homogeneous value of 34 wt% is required.

Lange, M. A.↗

Near-Edge X-ray Absorption Fine Structure Imaging of Spherical and Flat Counterfaces of Ultrananocrystalline Diamond Tribological Contacts: A Correlation of Surface Chemistry and Friction

A recently installed synchrotron radiation near-edge X-ray absorption fine structure (NEXAFS) full field imaging electron spectrometer was used to spatially resolve the chemical changes of both counterfaces from an ultra-nanocrystalline diamond (UNCD) tribological contact. A silicon flat and Si{sub 3}N{sub 4} sphere were both coated with UNCD, and employed to form two wear tracks on the flat in a linear reciprocating tribometer. The first wear track was produced using a new, unconditioned sphere whose surface was thus conditioned during this first experiment. This led to faster run-in and lower friction when producing a second wear track using the conditioned sphere. The large depth of field of the magnetically guided NEXAFS imaging detector enabled rapid, large area spectromicroscopic imaging of both the spherical and flat surfaces. Laterally resolved NEXAFS data from the tribological contact area revealed that both substrates had an as-grown surface layer that contained a higher fraction of sp{sup 2}-bonded carbon and oxygen which was mechanically removed. Unlike the flat, the film on the sphere showed evidence of having graphitic character, both before and after sliding. These results show that the graphitic character of the sphere is not solely responsible for low friction and short run-in. Rather, conditioning the sphere, likely by removing asperities and passivating dangling bonds, leads to lower friction with less chemical modification of the substrate in subsequent tests. The new NEXAFS imaging spectroscopy detector enabled a more complete understanding of the tribological phenomena by imaging, for the first time, the surface chemistry of the spherical counterface which had been in continual contact during wear track formation.

36 MATERIALS SCIENCE↗

Atomic-scale observation of structural and electronic orders in the layered compound α-RuCl 3

A pseudospin-1/2 Mott phase on a honeycomb lattice is proposed to host the celebrated two-dimensional Kitaev model which has an elusive quantum spin liquid ground state, and fascinating physics relevant to the development of future templates towards topological quantum bits. Here we report a comprehensive, atomically resolved real-space study by scanning transmission electron and scanning tunnelling microscopies on a novel layered material displaying Kitaev physics, -RuCl3. Our local crystallography analysis reveals considerable variations in the geometry of the ligand sublattice in thin films of -RuCl3 that opens a way to realization of a spatially inhomogeneous magnetic ground state at the nanometre length scale. Using scanning tunnelling techniques, we observe the electronic energy gap of 0.25 eV and intra-unit cell symmetry breaking of charge distribution in individual -RuCl3 surface layer. The corresponding charge-ordered pattern has a fine structure associated with two different types of charge disproportionation at Cl-terminated surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Solution Chemistry on the Dechlorination of 1,2,3-Trichloropropane by Zero-Valent Zinc

The reactivity of zerovalent zinc (ZVZ) toward 1,2,3-trichloropropane (TCP) was evaluated under a variety of solution conditions, including deionized water, groundwater, and artificial groundwater, over a pH range of about 6.5-12. In deionized water, first-order rate constants for TCP disappearance (kobs) exhibit a broad minimum between pH 8 and 10, with increasing kobs observed at lower and higher pH. The similarity between this trend and zinc oxide (ZnO) solubility behavior suggests pH related changes to the ZnO surface layer strongly influence ZVZ reactivity. Values of kobs measured in acidic groundwater are similar to those measured in DI water, whereas values measured in alkaline groundwater are much smaller (>1 order of magnitude at pH values >10). Characterization of the surfaces of ZVZ exposed to deionized water, acidic groundwater, and alkaline groundwater suggests that the slower rates obtained in alkaline groundwater are related to the presence of a morphologically distinct surface film that passivates the ZVZ surface. TCP degradation rates in artificial groundwater containing individual solutes present in groundwater suggest that silicate anions contribute to the formation of this passivating film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Modification of Nickel Foams by a Slurry Aluminizing Process

A novel slurry-based process for aluminizing nickel foams while improving the mechanical properties and conserving the excellent ductility is reported. Cellular unalloyed nickel foams with 92% porosity and uniform pore size and distribution were used as a starting material. Several slurries of different compositions were examined to investigate the possibility of developing an aluminide-nickel intermetallic coating on a Ni foam without considerably degrading the original ductile properties of the foam. The process temperature was varying from 400 to 850 deg. C and the process holding time was ranging between 2h to 6h. Scanning electron microscopy with an energy dispersive X-ray spectrometry and X-Ray diffraction were applied to assess the effectiveness of the aluminizing process and determine both the optimum parameters of the procedure (slurry composition, holding temperature and time) and the concentration profiles across the coating cross-section. The mechanical behavior of the aluminized Ni-foams was evaluated by the conduction of micro-tension tests. The resulting Ni-foams after aluminization retain the pore structure of original Ni-foams and present a thick outer surface layer which consists of a range of aluminide phases. The mechanical properties of the Ni-foams aluminized in low process temperature were insignificantly affected.

36 MATERIALS SCIENCE↗

Structural features and high quasi-static strain rate sensitivity of Au{sub 49}Cu{sub 26.9}Ag{sub 5.5}Pd{sub 2.3}Si{sub 16.3} bulk metallic glass

Here we report on the formation of a crystalline Au-based solid solution surface layer on solidification, which is responsible for yellow color of the Au-based bulk metallic glass (BMG) samples. The structure of the BMG alloy was studied by X-ray diffractometry, scanning electron microscopy, and transmission electron microscopy. The deformation behavior of these Au-based BMG samples on heating was studied at temperatures above T{sub g} at different strain rates.

36 MATERIALS SCIENCE↗

Formation of Microcracks in a Heterogeneous Solid (Sandstone) under the Influence of Friction

The growth rate and size of microcracks, formed in the surface layer of a heterogeneous natural solid (sandstone) under friction were studied via triboluminescence. It was discovered that destruction of the crystal lattice of plagioclase and quartz, composing sandstones, induces triboluminescence signals. Each s-ignal corresponds to a microcrack, whose surface contains electronically excited free radicals ≡Si–O{sup –} and Fe{sup 3+} ions. The size and growth rate of microcracks were assessed by means of analysis of the rate and duration of the buildup of these signals. The growth rate of microcracks turned out to be less than the elastic wave velocity (~700 m/s) and varied from ∼380 to ∼650 m/s. The size of microcracks varied from ∼4 to ∼7 μm. It was assumed that the variation in the size and growth rate of microcracks were caused by differences in value of the barriers, upon breaking which the microcracks appear.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗