Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMMERCIAL SECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Data for Pilot-Scale Processing of Miscanthus x giganteus for Recovery of Anthocyanins Integrated with Production of Microbial Lipids and Lignin-Rich Residue

Chemical-free hydrothermal pretreatment of Miscanthus x giganteus (Mxg) at the lab scale using high liquid-to-solid ratios resulted in the recovery of anthocyanins and enhanced enzymatic digestibility of residual biomass. In this study, the process is scaled up by using a continuous hydrothermal pretreatment reactor operated at a low liquid-to-solid ratio (50 % w/w solids) as an important step towards commercialization. Anthocyanin yield was 70 % w/w at the pilot scale (50 kg of Mxg), compared to the 94 % w/w yield achieved at the lab scale (0.5 g of Mxg). The pretreated biomass was subsequently refined mechanically using a disc mill to increase the accessibility of cellulose by cellulases. Enzymatic saccharification of the pretreated and disc-milled residue yielded 238 g/L sugar concentration by operating in fed-batch mode at 50 % w/v solids content. Two strains of Rhodosporidium toruloides were evaluated for converting the hydrolysate sugars into microbial lipids, and strain Y-6987 had the highest lipid titer (11.0 g/L). Further, the residue left after enzymatic saccharification was determined to be enriched 1.7-fold in the lignin content. This lignin-rich residue has value as a feedstock for the production of sustainable aviation fuel precursors and other high-value lignin-based chemicals. Hence the proposed biorefinery based on Mxg creates an opportunity for generating revenue from multiple high-value products. As the demand for biofuels and biobased products is rising, the biorefinery products from Mxg would create a niche in the industrial sector.

Conversion↗

Sun Grant/DOE Regional Feedstock Partnership: Final Technical Report

The U.S. Department of Energy (DOE) and the Sun Grant Initiative initiated the Regional Feedstock Partnership (referred to as the Partnership) in 2007 primarily to address information gaps associated with the likelihood for realization of the sustainable and reliable production of a billion-tons of biomass annually to support the U.S. bioenergy industry by the year 2030. Publication of The Technical Feasibility of a Billion-Ton Annual Supply (Perlack et al., 2005) in 2005, with its associated yield assumptions, led to the realization that the yield goals and assumptions utilized in that analysis required careful validation. To achieve the overall goal of validating key yield assumptions, the following objectives were developed: 1. Establishment of replicated field trials across regions to determine the impact of crop residue removal (primarily corn and small grains) on future grain yields and soil health. 2. Establishment of replicated field trials of some of the most promising dedicated energy crops (herbaceous annuals and perennials, as well as woody perennials) to demonstrate the potential performance of these feedstocks across the U.S. 3. Assessment of feedstock resources to be used to estimate a sustainable national supply potential. Teams composed of representatives from Land Grant Universities, USDA ARS, DOE National Laboratories, industry, and other federal agencies were identified and assembled to address each of these objectives. For Objective 1, members of the USDA ARS’ Resilient Economic Agricultural Practices (REAP) team combined with university personnel to leverage on-going work and established new trials to determine sustainable corn residue removal rates. In addition, universities across the continental U.S. conducted surveys of published past research to define parameters for the use of cereal grain residue (primarily wheat) as a biomass feedstock. For Objective 2, and based on input from DOE, USDA, Land Grant university scientists, and others, several herbaceous and woody energy crop species were selected for new or further evaluation across wide geographic areas as cellulosic feedstock sources. Species teams were organized to assess the yield potential of candidate herbaceous feedstocks including sorghum, energycane, Miscanthus x giganteus (hereafter referred to as miscanthus), switchgrass, and mixed perennial species (primarily grasses and some legumes) on Conservation Reserve Program (CRP) land. Woody species will be critical components of the bioenergy sector; therefore, species teams were also organized for shrub willow and hybrid poplar (Populus spp.). Field trials of each species were utilized to determine yield potential across the U.S. For Objective 3, a GIS resource team was organized with representatives from each of the five Sun Grant regions. While some regional assessments were made, the multi-institutional team decided that the group from Oregon State University would utilize their PRISM ELM model to estimate national yield potential of the various species evaluated. The following are key outcomes and impacts • The Partnership demonstrated the production potential of diverse herbaceous and woody feedstocks across much of the U.S. for 5-7 consecutive growing seasons. Long-term studies such as this are not commonly possible due to limitations in funding cycles. • Long-term field trials were valuable in demonstrating the importance of agronomic management practices and genetic resources to yield of sorghum, switchgrass, miscanthus, energycane, CRP mixed perennial grasses, poplar, and willow. • National yield potential maps were developed for all species evaluated in the Partnership. • Sustainable corn stover removal rates were quantified for use by producers, harvesters, and commercial lignocellulosic biorefineries. • Data from the Partnership field trials not only validated initial Billion Ton estimates, but were instrumental in developing both the Billion Ton Update in 2011, and especially the 2016 Billion Ton Report. • The Partnership provided the opportunity to assemble and conserve a poplar germplasm collection that contains more than 20,000 clones for use in breeding programs. New clones resulting from crosses made using this germplasm collection have resulted in significantly improved cultivars that could be scaled up and deployed. • Further validation of improved yields of new varieties/cultivars of biomass sorghum, energycane, hybrid poplars, and shrub willows was produced by the Partnership. • The Partnership demonstrated the potential of energycane in northern parts of the southeastern U.S., particularly in relation to sugarcane varieties. • For certain feedstocks (e.g., CRP mixed grasses, switchgrass, willow, and poplar), production economics were ascertained through Partnership field trials. • Biomass samples collected as part of the Partnership are also being used to populate Idaho National Laboratory’s Bioenergy Feedstock Library. • Because of the size and scope of the Partnership, workforce development was a key component and outcome. Numerous undergraduate students (25), graduate students (15 MS and 8 PhD), and postdoctoral researchers (7) were trained by Partnership participants. This will help to prepare individuals for careers in the emerging fields of plant breeding, biomass production, feedstock supply logistics, and biomass conversion processes. • More than 130 scientific publications have been authored by Partnership team members. Numerous other presentations, outreach publications, book chapters, and websites have also been developed to further the continued development of the bioeconomy.

09 BIOMASS FUELS↗

Comparative life-cycle energy payback analysis of multi-junction a-SiGe and nanocrystalline/a-Si modules

Despite the publicity of nanotechnologies in high tech industries including the photovoltaic sector, their life-cycle energy use and related environmental impacts are understood only to a limited degree as their production is mostly immature. We investigated the life-cycle energy implications of amorphous silicon (a-Si) PV designs using a nanocrystalline silicon (nc-Si) bottom layer in the context of a comparative, prospective life-cycle analysis framework. Three R and D options using nc-Si bottom layer were evaluated and compared to the current triple-junction a-Si design, i.e., a-Si/a-SiGe/a-SiGe. The life-cycle energy demand to deposit nc-Si was estimated from parametric analyses of film thickness, deposition rate, precursor gas usage, and power for generating gas plasma. We found that extended deposition time and increased gas usages associated to the relatively high thickness of nc-Si lead to a larger primary energy demand for the nc-Si bottom layer designs, than the current triple-junction a-Si. Assuming an 8% conversion efficiency, the energy payback time of those R and D designs will be 0.7-0.9 years, close to that of currently commercial triple-junction a-Si design, 0.8 years. Future scenario analyses show that if nc-Si film is deposited at a higher rate (i.e., 2-3 nm/s), and at the same time the conversion efficiency reaches 10%, the energy-payback time could drop by 30%.

14 SOLAR ENERGY↗

Opinions of fisheries researchers, managers, and anglers towards recreational fishing issues: an exploratory analysis for North America

There is a need to better understand the perspectives of various recreational fishing stakeholder groups regarding key issues related to fisheries sustainability. To provide a first snapshot and to inform future human dimension studies in this area, we distributed a Web-based open-access survey to fisheries researchers, fisheries managers, and anglers in North America. Attitudes of these respondents towards issues such as overharvest, impacts of catch and release, recreational fisheries management, and research priorities for the future were assessed. We found similar opinions and perspectives by the responding recreational anglers, managers,and researchers on a number of issues, such as the perceived impact of commercial fishing contributing to fish stock declines, the perceived importance of using and promoting gear that minimizes stress and injury to individual fish when fish are to be released, and the belief that conflicts among stakeholders is growing as is the global anti-fishing movement based on animal rights thinking. Differences among responding groups included that researchers tended to be more concerned than anglers and managers with the potential of recreational angling contributing to fish stock declines. Responding anglers were also less content with their involvement in the fisheries management process than were responding managers and researchers, and these anglers also indicated a greater desire for more human dimensions research on understanding angler attitudes and behavior than was evident for responding managers and researchers. This preliminary survey revealed some variation in attitudes among recreational fisheries stakeholders. However, due to lack of random sampling, the study results cannot be extrapolated to the population level. We nevertheless conclude that improved communication and better understanding about the different perspectives among fisheries researchers, managers, and anglers and intrasectorally among different angling groups are needed, particularly when addressing contentious issues of relevance for the entire recreational fishing sector.

54 ENVIRONMENTAL SCIENCES↗

Farmer characteristics and decision-making: A model for bioenergy crop adoption

We report the commercial development of biofuels and bioproducts depends on whether renewable biomass feedstock is available while not directly competing with the production of food. Farmers are one of the most important stakeholders in the biofuel supply chain and confront a range of uncertainties while entering the bioenergy market. Their decision-making process is extremely complex and rarely purely rational. Modeling farmer behavior requires considering a wide range of individual-level factors, socio-temporal dynamics, institutional settings, and their interactions. These characteristics make agent-based modeling a suitable framework for evaluating such systems. We developed a model to simulate farmer bioenergy crop adoption behavior across a 50-county study region in Nebraska, Kansas, and Colorado. The analysis considers adoption decisions for two bioenergy feedstocks, crop residues and energy crops. We examine the influence of individual and farm characteristics, market structure, social networks, and media influence on farmer adoption decisions. Our results indicate that different factors can have varied impacts on the speed of adoption for the crop residues and energy crops. Identifying levers that have the most impact on grower adoption can inform the design of interventions both from policy and private sector standpoints with important implications for the future the bioenergy industry.

09 BIOMASS FUELS↗

Final Report: TIP-337 Home Battery System for Cybersecure Energy Efficiency and Demand Response

Many challenges related to energy use and grid participation face the residential building sector and utilities that serve our homes today. To reduce energy consumption, increase grid service participation, and improve homeowner benefits, a solution is needed that can adapt itself to each home and homeowner/occupant, that can deliver both building and grid services with reliability and high availability, that can automate these operations to minimize cost and complexity of deployment, and that can provide both home data privacy and grid cybersecurity. We hypothesize that customer-oriented home automation can mutually satisfy home occupant/owner needs, reduce energy consumption, and deliver reliable grid services. This project seeks to develop innovative technology solutions that prove this hypothesis. The Home Battery System (HBS) is a technology package comprised of connected 'smart' appliances, rooftop solar photovoltaics, a home battery, and a coordinating smart controller. This system is envisioned, developed and demonstrated by the National Renewable Energy Laboratory (NREL), Bosch, ESCRYPT and Colorado State University (CSU). It is the result of three years of research by our diverse team. NREL developed the home automation controller, and performed simulation and laboratory evaluations of the HBS. Bosch developed and delivered most of the connected appliances used in the project, and provided technical and commercialization guidance. ESCRYPT led cybersecurity analysis and developed the cybersecurity layer. CSU provided leadership on preference elicitation methodologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Expert perspectives on the wind plant of the future

Abstract Wind power technology has changed rapidly in recent years. Technology innovation, evolving power markets, and competing land and ocean uses continue to influence the design and operation of wind turbines and plants. Anticipating these trends and their impact on future facilities can inform commercial strategies and research priorities. Drawing from a recent survey of 140 of the world's foremost wind experts, we identify expectations of future wind plant design in 2035, both for onshore and offshore wind. Experts anticipate continued growth in turbine size, to 5.5 (onshore) and 17 MW (offshore), with plants located in increasingly less favorable wind and siting regimes. They expect plant sizes of 1,100 MW for fixed‐bottom and 600 MW for floating offshore wind. Experts forecast enhanced grid‐system value from wind through significant to widespread use of larger rotors, hybrid projects with batteries and hydrogen production, and more. To explain experts' perspectives on future plant design and operation, we identify five mechanisms: economies of unit, plant, and resource scale; grid‐system value economies; and production efficiencies. We characterize learning effects as a moderating influence on the strength of these mechanisms. In combination, experts predict that these design choices support levelized cost of energy reductions of 27% (onshore) and 17%–35% (floating and fixed‐bottom offshore) by 2035 compared to today, while enhancing wind energy's grid service offerings. Our findings provide a much‐needed benchmark for representing future wind technologies in power sector models and address a critical research gap by explaining the economics behind wind energy design choices.

17 WIND ENERGY↗

Opportunity Assessment for Sustainable Aviation Fuel Production from Woody Biomass via Ex Situ Catalytic Fast Pyrolysis and Refinery Hydroprocessing

Biofuels have become a promising solution to reduce emissions in hard-to-electrify transportation sectors, such as aviation. However, several biofuel conversion pathways will likely be needed to scale sustainable aviation fuel (SAF) production to meet lower carbon intensity goals when biomass feedstock availability constraints are considered. This study evaluates the future potential of the catalytic fast pyrolysis (CFP) pathway to contribute to U.S. SAF production goals as outlined in the U.S. Department of Energy’s (DOE) SAF Grand Challenge, understanding that the CFP pathway is still under development toward maturity and scaleup. National forestland resource data from the DOE’s 2023 Billion Ton Study are integrated with recent experimental results demonstrating end-to-end woody biomass conversion to SAF via CFP and hydroprocessing in a novel bioeconomy optimization framework. U.S. refinery hydroprocessing capacity is also considered with repurposing and coprocessing strategies. Results indicate that the CFP process can contribute up to 4.6 billion gallons of SAF annually by 2040, meeting 13% of the 2050 SAF Grand Challenge target while reducing the carbon intensity (CI) of the U.S. jet fuel pool by 16%. The study further explores optimal processing strategies, suggesting that colocating CFP operations with existing petroleum refineries and repurposing some U.S. hydrocracking capacity may offer significant cost advantages and enhance the commercial viability of the CFP pathway. These results underscore the CFP pathway’s potential to support the global aviation industry’s lower carbon intensity objectives while producing other renewable fuels and products.

09 BIOMASS FUELS↗

Macroeconomic Benefits of Low-Cost Reusable Launch Vehicles

The National Aeronautics and Space Administration (NASA) initiated its Reusable Launch Vehicle (RLV) Technology Program to provide information on the technical and commercial feasibility of single-stage to orbit (SSTO), fully-reusable launchers. Because RLVs would not depend on expendable hardware to achieve orbit, they could take better advantage of economies of scale than expendable launch vehicles (ELVs) that discard costly hardware on ascent. The X-33 experimental vehicle, a sub-orbital, 60%-scale prototype of Lockheed Martin's VentureStar SSTO RLV concept, is being built by Skunk Works for a 1999 first flight. If RLVs achieve prices to low-earth orbit of less than $1000 US per pound, they could hold promise for eliciting an elastic response from the launch services market. As opposed to the capture of existing market, this elastic market would represent new space-based industry businesses. These new opportunities would be created from the next tier of business concepts, such as space manufacturing and satellite servicing, that cannot earn a profit at today's launch prices but could when enabled by lower launch costs. New business creation contributes benefits to the US Government (USG) and the US economy through increases in tax revenues and employment. Assumptions about the costs and revenues of these new ventures, based on existing space-based and aeronautics sector businesses, can be used to estimate the macroeconomic benefits provided by new businesses. This paper examines these benefits and the flight prices and rates that may be required to enable these new space industries.

Shaw, Eric J.↗

Big Data Mining for Applied Energy Savings in Buildings

Residential and commercial buildings in China, India, the United States (US), United Kingdom (UK), and Italy consume 39-45% of each nation's primary energy (approximately 73% of electricity). Building energy models can be used to automatically optimize the return-on-investment for retrofits to improve a building’s energy efficiency. However, with an average of 3,000 building descriptors necessary to accurately simulate a single building, there is a market need to reduce the transaction cost for creating a simulatable model for every building in a city and calibrate the models to utility data prior to capital expenditures. Oak Ridge National Laboratory has utilized two of the world’s fastest supercomputers, assembled unique datasets, and developed innovative algorithms for big data mining to produce the Automatic detection and creation of Building Energy Models (AutoBEM) technology for urban-scale energy modeling. The project developed the world’s most accurate method for determining building footprints from satellite imagery and the world’s fastest building energy model generator. The team has also leveraged a total of eight supercomputers to analyze the best methods, metrics, and algorithms for calibrating building models to measured data within 4% of hourly electricity use; well beyond current industry standards necessary for private-sector financing. The project developed the world’s fastest buildings simulator, over 8 million simulations totaling over 200TB, and mined this data with over 130,000 parallel artificial intelligence algorithmic instances to develop the world’s best calibration algorithm in terms of accuracy, runtime, and robustness.

New, Joshua↗

Ultra-fast Boriding for Improved Energy Efficiency and Reduced Emissions in Materials Processing Industries (Final Report)

High-temperature treatment processes (such as nitriding, carburizing, and boronizing) are well-established and used widely by numerous industrial sectors to achieve superior mechanical and tribological properties on all kinds of engineering components made out of ferrous materials. Unfortunately, these traditional processes are very slow and energy intensive, and they produce large amounts of CO 2 emissions and liquid/solid wastes to deal with during and after each process run. From economic and environmental points of views, it is highly desirable to develop and implement novel surface treatment technologies that are quick, cheap, clean, and energy efficient. The main objective of this project was to develop an industrial-scale ultra-fast boriding process that realizes all of these desirable attributes. The other objectives of the project were to demonstrate the superior performance, properties, and durability of borided surfaces under relevant test conditions and to transfer optimized technology to industry for large-scale practice. Major research activities included process design, modeling, product optimization, and scale-up. This project has achieved all of its stated objectives, and the industrial-scale boriding process has been successfully transferred to industry. Specifically, all of the original tasks have been completed, and the milestones have been met by scaling up from a small proof-of-concept system (which could only handle about 0.25 kg melt) to a commercial-scale boriding unit that can handle up to 4,000 kg melt. Mechanical and tribological testing of borided test samples and industrial parts has also been carried out, and their superior performance over a broad range of test conditions has been validated. With the large-scale, ultra-fast boriding process, we could achieve thick, hard, and uniform boride layers on all kinds of steel components, even after only 5 min of treatment time. We could also attain excellent uniformity in thickness over the entire exposed surfaces — even in the very sharp corners or interior sections of odd-shaped workpieces. Boriding of numerous nonferrous materials was also demonstrated, and thick boride layers (up to 300 µm in thickness) were achieved on their outer surfaces. With the use of a large-scale boriding unit at Argonne National Laboratory, our research team has successfully treated large numbers of industrial components in a batch-to-batch operation without creating any in-house gaseous emissions or producing solid and/or liquid wastes. With the use of this large unit, our team achieved surface hardness values of 15 to 45 GPa, depending on the type of metal or alloy being treated. The thick boride layers attained on steel components consisted of FeB, Fe 2 B, and Fe 3 B phases, and their hardness values ranged from 16 to 22 GPa. Layers consisting of Fe 2 B phase alone are also possible with this process, and in the case of nonferrous materials. Overall, because of the much superior property and performance improvements in treated products, much lower energy consumption, and nearly zero environmental waste and emissions, the demonstrated boriding technology may find broad applications in many cross-cutting industries. Mechanical wear, abrasion, erosion, corrosion, and scuffing are often life-limiting factors in mechanical systems that are used in manufacturing, transportation, aerospace, agricultural, earth-moving, and mining equipment; but the machine components treated by ultra-fast boriding can effectively prevent such degradations. In this project, the ultra-fast boriding was proven to be most ideal for the treatment of iron and many other ferrous alloys, like stainless steel. We have shown through our experimental studies that our method can also be used for the treatment of many nonferrous metals and alloys. In the case of superalloys and Ni 3 Al intermetallic materials, more than a 300-µm thick boride layer can be achieved with our boriding furnace within 15 to 30 min (which results in five times the hardness of the base materials). Pre-carburized steels and nonferrous alloys can also be treated by the new boriding technique. Overall, very thick (more than a quarter millimeter) and hard surface layers produced by ultra-fast boriding are expected to have a positive impact on the performance and durability of all types of machine components that are subject to corrosive, erosive, abrasive, and adhesive wear. Since the focus of our project was primarily on the large-scale boriding of ferrous materials, in this report, we will broadly cover the results from various ferrous materials that were used in our experiments. Another transformational feature of ultra-fast boriding is that it does not create any greenhouse gas emissions or solid and/or liquid wastes to deal with during or after the treatment; hence, it is an ultra-green technology (no need for expensive waste disposal and/or treatment facilities). It may eliminate the use of natural gas and other carbon-based fuels as the primary energy source in the heat treatment industry (which is the most common practice at present), thus, minimizing the CO 2 , NO x , CO, and SO x emissions that are generated in large quantities by current heat treatment practices. The main ingredient used during boriding is borax, which is a natural mineral. Our demonstrated and scaled-up technology can now be used in a wide range of manufacturing and transportation applications. It can deliver thick and uniform boride layers of more than 200 µm in steels, if needed, over the entire exposed surfaces — even in the very sharp corners or interior sections of workpieces (which are typical of gears, tools, pipes, and other components). Beneath the distinct boride layers is an equally-thick boron diffusion layer or zone, which is comparable to the diffusion zones achieved by carburizing and nitriding processes. In the cases of traditional boriding, nitriding, and/or carburizing methods, achieving such layer thickness and case depths would have taken several hours, and these surfaces would not have achieved the same levels of hardness and other desirable properties as they do with ultra-fast boriding. Some of the key stakeholders of ultra-fast boriding technology include companies that are active in heat-treatment, thermal-diffusion, and hard-coating processes; metal-forming, machining, and other manufacturing processes; and technologies related to transportation (including original equipment manufacturers for autos), mining and oil exploration, agricultural and heavy equipment. Bodycote Thermal Processing was the cost-sharing industrial partner and licensee in this project. They also provided test components and technical and commercial information pertaining to industrial components that are most suitable for ultra-fast boriding. Bodycote also coordinated some of the field tests and metallurgical examinations. Overall, ultra-fast boriding is a transformational technology that can complement, if not replace, many of the energy- and carbon-intensive surface treatment processes that are in use today, such as conventional boriding, carburizing, nitriding, carbo-nitriding, and physical and chemical vapor deposition. In our project, the developed technology was scaled-up and proven to be an ultra-green, ultra-efficient process that can drastically reduce costs, increase productivity, and improve the performance and reliability of machine components used in cross-cutting industrial applications.

Erdemir, Ali↗

The adult literacy evaluator: An intelligent computer-aided training system for diagnosing adult illiterates

An important part of NASA's mission involves the secondary application of its technologies in the public and private sectors. One current application being developed is The Adult Literacy Evaluator, a simulation-based diagnostic tool designed to assess the operant literacy abilities of adults having difficulties in learning to read and write. Using ICAT system technology in addition to speech recognition, closed-captioned television (CCTV), live video and other state-of-the art graphics and storage capabilities, this project attempts to overcome the negative effects of adult literacy assessment by allowing the client to interact with an intelligent computer system which simulates real-life literacy activities and materials and which measures literacy performance in the actual context of its use. The specific objectives of the project are as follows: (1) To develop a simulation-based diagnostic tool to assess adults' prior knowledge about reading and writing processes in actual contexts of application; (2) to provide a profile of readers' strengths and weaknesses; and (3) to suggest instructional strategies and materials which can be used as a beginning point for remediation. In the first and developmental phase of the project, descriptions of literacy events and environments are being written and functional literacy documents analyzed for their components. Examples of literacy events and situations being considered included interactions with environmental print (e.g., billboards, street signs, commercial marquees, storefront logos, etc.), functional literacy materials (e.g., newspapers, magazines, telephone books, bills, receipts, etc.) and employment related communication (i.e., job descriptions, application forms, technical manuals, memorandums, newsletters, etc.). Each of these situations and materials is being analyzed for its literacy requirements in terms of written display (i.e., knowledge of printed forms and conventions), meaning demands (i.e., comprehension and word knowledge) and social situation. From these descriptions, scripts are being generated which define the interaction between the student, an on-screen guide and the simulated literacy environment. The proposed outcome of the Evaluator is a diagnostic profile which will present broad classifications of literacy behaviors across the major areas of metacognitive abilities, word recognition, vocabulary knowledge, comprehension and writing. From these classifications, suggestions for materials and strategies for instruction with which to begin corrective action will be made. The focus of the Literacy Evaluator will be essentially to provide an expert diagnosis and an interpretation of that assessment which then can be used by a human tutor to further design and individualize a remedial program as needed through the use of an authoring system.

Yaden, David B., Jr.↗

Retooling a Trade Association in a Challenged Industry: The Nuclear Energy Institute Story - 18503

The U.S. Nuclear industry is facing significant challenges to maintain economic competitiveness in an electricity supply sector where advances in natural gas, wind, and solar technologies are reshaping the marketplace. As clean and reliable baseload generation, nuclear still has a valuable role to play. But in order for the power of the atom to remain available for meeting the nation's energy, environmental, and national security needs, it will be imperative that industry leadership innovate and become more efficient at a pace that matches the competition. Industry leaders rely, to a large extent, on their trade association - the Nuclear Energy Institute (NEI) - to be the prime mover in championing initiatives that will enable a successful future. NEI realized that, in the face of an increasingly difficult economic situation, it must become both leaner and more forward looking - it would have to extend its reach and influence while at the same time reigning in costs to its membership. Therefore, on January 17, 2017 NEI completed a restructuring to improve member value and organizational effectiveness. This restructuring was designed in recognition that the nuclear industry is at a pivotal time, and NEI had a unique opportunity to change its trajectory and underline the importance of nuclear energy's role in the nation's critical infrastructure. NEI is now better positioned to support the existing reactor fleet, promote commercialization of advanced reactors, and drive American leadership in commercial nuclear exports and technology around the world. NEI began this restructuring in the fall of 2016 when it consolidated Government Affairs, Communications, Policy and Public Affairs under a new External Affairs function. The January 2017 action extended that effort across the remainder of the organization, ensuring that the organization is highly aligned, member-focused and results driven. The new NEI takes pride in the fact that it is comprised of talented employees who are passionate about nuclear energy and can make a difference for our membership. With this team in place, NEI looks forward to advancing the interests of the nuclear industry while contributing to a safer, cleaner and more productive world. This paper will examine the details of how this new organization was constructed, provide an overview of the National Nuclear Energy Strategy it developed to guide its efforts, examine the trials and tribulations that come along with disruptive change, and reflect on what has been accomplished in the retooled organizations first year. (authors)

99 GENERAL AND MISCELLANEOUS↗

Hamilton: Flexible, Open Source $10 Wireless Sensor System for Energy Efficient Building Operation

Sensors for improving building performance are rapidly populating the market, driven in part by the drive to reduce greenhouse gas emissions resulting from energy production as well as improve the interior environment for healthy and more productive spaces. UC Berkeley has led wireless sensor development over the past 25 years (e.g., Telos mote), with the Hamilton (named after Alexander Hamilton on the US $10 bill) as the most recent. The Hamilton sensor was designed as a low-cost high-performance sensor that is modular and interoperable. The objective of the Hamilton project was to create, evaluate and establish the technological foundations for secure and easy to deploy building energy efficiency applications utilizing pervasive, low-cost wireless sensors integrated with traditional Building Management Systems (BMS), consumer-sector building components, and powerful data analytics. The project included iterative hardware design, incorporating a high-performance database (BTrDb, http://btrdb.io/), creating and iterating the development of secure data middleware (BOSSwave, WAVE/WAVEMQ), working with and pushing the development of an open-source tiny operating system RiotOS, and implementing and improving protocols such as Thread/OpenThread and TCP/IP. The hardware benefited from careful design to drive down the cost; the design included a System-on-a-Chip (SoC), chip antenna, single crystal and five passive components. Careful design of the operating system created a low-power design to enable a long life with small batteries. The hardware included several sensors: temperature, radiant temperature, relative humidity, magnetometer, accelerometer, and light, with an optional occupancy (Passive InfraRed) sensor. The project was the basis of several applications, both internal to the research team and other researchers and professionals at other institutions. Several applications used the sensor hardware as the basis for other complex devices. Other applications used the sensors to improve building performance through interoperating with the building Heating Ventilation and Air-Conditioning (HVAC) system, such as using occupancy and/or distributed temperature sensing to reduce HVAC zone energy while still providing thermal comfort and to reduce peak loads in small commercial buildings. We demonstrated cloud-based energy analytics, implemented a schedule and a Model Predictive Controller in a small commercial building to optimize HVAC energy, occupancy and electricity price. Initial integration of these technological innovations was performed through the creation of execution containers containing the WAVE agent and various driver, proxy, or building system function logic. The research added to the understanding of efficient sensor hardware, secure middleware, time-series data management (high performance database), efficient communication protocols, and interoperating with applications and building systems. The project showed the technical effectiveness and economic feasibility of creating a low-cost, modular, and easy-to-deploy sensor. Through conversations with multiple end users, the research team discovered that many customers wanted data management and services in addition to the sensors. HamiltonIOT developed packages of sensors, border router, and data services to provide a seamless “plug-and-play” sensor deployment. Some customers were willing to pay for higher quality sensors (such as light); some customers wanted a robust enclosure (waterproof).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Final Technical Report: Renewable Energy Feasibility Study and Resources Assessment

In March 2011, the U.S. Department of Energy (DOE) awarded White Pine County, Nevada, a grant to assess the feasibility of renewable resource-related economic development activities in the area. The grant project included a public outreach and training component and was to include a demonstration project; however, the demonstration project was not completed due to lack of identification of an entity willing to locate a project in White Pine County. White Pine County completed the assessment of renewable resources and a feasibility study on the potential for a renewable energy-focused economic sector within the County. The feasibility study concluded "all resources studied were present and in sufficient quantity and quality to warrant consideration for development" and there were varying degrees of potential economic impact based on the resource type and project size. The feasibility study and its components were to be used as tools to attract potential developers and other business ventures to the local market. White Pine County also marketed the County’s resources to the renewable energy business community in an effort to develop contracts for demonstration projects. The County also worked to develop partnerships with local educational institutions, including the White Pine County School District, conducted outreach and training for the local community.

09 BIOMASS FUELS↗

Coupling a Lagrangian–Eulerian Spark-Ignition (LESI) model with LES combustion models for engine simulations

In the United States transportation sector, Light-Duty Vehicles (LDVs) are the largest energy consumers and CO 2 emitters. Electrification of LDVs is posed as a potential solution, but SI engines can still contribute to decarbonization. Car manufacturers have turned to unconventional engine operation to increase the efficiency of Spark-Ignition (SI) engines and reduce the carbon emissions of their fleets. Dilute, lean, and stratified-charge engine operation has the potential for engine efficiency improvements at the expense of increased cyclic variability and combustion instability. At such demanding engine conditions, the spark ignition event is key for flame initiation and propagation and for enhanced combustion stability. Reliable and accurate spark ignition models can help design ignition systems that reduce cyclic variability. Multiple computational spark-ignition models exist that perform well under conventional conditions, but the underlying physics needs to be expanded, for unconventional engine operation. In this paper, a hybrid Lagrangian–Eulerian Spark-Ignition (LESI) model is coupled with different turbulent flame propagation models for engine simulations. LESI relies on Lagrangian arc tracking and Eulerian energy deposition. The LESI model is coupled with the Well-Stirred Reactor (WSR), Thickened Flame Model (TFM), and g-equation model and used to simulate several cycles of a Direct-Injection Spark-Ignition (DISI) engine using a commercial Computational Fluid Dynamics (CFD) engine solver. The results showcase the successful coupling of LESI with the combustion models. Global engine metrics, such as pressure and Apparent Heat Release Rate (AHRR), for each simulation setup are compared to experimental engine results, for validation. In addition, results highlight the successful prediction of spark channel movement by comparing simulation images to experimental optical engine images. Finally, the successful coupling of LESI to combustion models, making it a usable model in the engine modeling community, is emphasized and future development details are discussed.

33 ADVANCED PROPULSION SYSTEMS↗

Mechanical and thermal behavior of additively manufactured Invar 36 using a laser hot wire hybrid DED process

Invar 36 alloy is a material of high interest in the composite tooling sector due to its low coefficient of thermal expansion. Current production of Invar 36 tooling using traditional manufacturing such as casting and forging is associated with long lead times due to a multitude of factors such as labor and component shortages, high material costs, foreign competition, and supply chain issues. An attractive alternate process is the use of an integrated 5-axis CNC hybrid Laser Hot Wire Deposition System (LHWD) for manufacturing invar molds. Here, the hybrid process provides a combination of the additive and subtractive technologies resulting in a synergistic platform for producing and repairing structures and molds. The main novelty and goal of this work is to study the properties of Invar deposited by a LHWD and to provide guidelines for the manufacture of parts using this process. In this study, the thermal expansion behavior of the manufactured specimens has been analyzed and related to its printing parameters and direction. Multiple specimens were extracted for mechanical, dilatometry and metallographic testing. A thermal IR recording of the printing process was also carried out to observe the thermal history of the produced parts to establish thermal influence on performance-property-processing relationship. The results of these tests show the advantage of LHWD technology for the manufacture of Invar alloy parts, as it presents similar thermal expansion behavior as those commercially available with minimal presence of precipitates and no macrostructural failures such as pores, cracks and lacks of fusion.

36 MATERIALS SCIENCE↗