SEARCH · Search NASA

Results for “Compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Graphite-epoxy panel compression strength reduction due to local impact

A review of results from on-going research to investigate the effects of low-velocity impact on the compressive strength of graphite-epoxy structures is presented. Extensive tests have been conducted on sandwich beams, laminated plates and stiffened panels. Conditions for failures were investigated by impact tests on statically loaded test specimens. The effects of compression load intensity were such that lightly loaded graphite structures (such as aircraft secondary structure) were insensitive to impact damage. In more heavily loaded structures, (such as wing panels), however, appreciable reductions in compressive strength occurred. The implications of the tests for structural design are discussed by comparing panel masses for designs where ultimate strains have been reduced due to impact considerations with the masses of designs with higher ultimate strains. Finally, preliminary test data is presented to show the possibility of improvements in damage tolerance achievable by using an alternate matrix material.

Card, M. P.↗

NASA NTRS1979

Minimum-mass designs of stiffened graphite/polyimide compression panels

This study presents results from an analytic investigation to determine minimum-mass designs of stiffened Gr/Pi compression panels for a wide range of uniaxial compression loads. Four panel configurations are considered: (1) hat stiffened-laminated skin, (2) hat stiffened-honeycomb core sandwich skin, (3) blade stiffened-laminated skin and (4) blade stiffened-honeycomb core sandwich skin panels. Designs are generated by an automatic optimization computer code entitled PASCO (Panel Analysis and Sizing COde). The analysis portion of PASCO contains a generalized buckling analysis which calculates all critical modes without assuming any of them a priori. Mass-strength curves are presented for the four configurations along with specific designs generated for low, moderate and high values of compression load. A mass-strength curve for a titanium hat stiffened panel is provided for comparison. A 30% to 50% mass savings over titanium panels is shown for moderately and heavily loaded Gr/Pi panels.

Weaver, G. G., II↗

NASA NTRS1979

Effect of impact damage and holes on the compressive strength of a graphite/epoxy laminate

An experimental investigation has been conducted to determine the effect of low-velocity impact damage and unloaded circular holes on the compressive strength of a 48-ply orthotropic graphite/epoxy flat laminate. Specimens were impacted by a 1.27-cm-diameter aluminum sphere with speeds from 52 to 101 m/x to simulate momenta typical of low-velocity impact hazards that can occur in commercial aircraft service. It is shown that low-velocity impact damage can significantly degrade the static compressive strength of the laminate. Specimens that fail at axial strains above 0.008 in the undamaged condition can fail at strains as low as 0.0031 when impacted at 100 m/s. Circular holes also reduce the static compressive strength of the laminate. The failure strain decreases as the hole diameter increases.

Starnes, J. H., Jr.↗

NASA NTRS1980

Free convection in enclosures exposed to compressive heating

An experimental study of heat transfer in a vertical annulus and a three-dimensional gap used to establish the influence of compressive heating on the convective process in enclosures is presented. Test runs were made using helium gas with compressive rates of 6, 15, and 30 psi/min. Temperature and pressure histories were reduced to film coefficients based on nodal modeling of the test geometries. The data are correlated in terms of free convection parameters. The heat transfer correlations show virtually no influence of compression rate and only a slight dependence on geometry. The correlations will be applied to the design of a vented Galileo mission descent module parachuting into the Jupiter atmosphere.

Bobco, R. P.↗

NASA NTRS1980

Experimental investigation of graphite/polyimide sandwich panels in edgewise compression

The local and general buckling behavior of graphite/polyimide sandwich panels simply supported along all four edges and loaded in uniaxial edgewise compression was investigated. Material properties of adhesive and facings were determined from flatwise tension and sandwich beam flexure tests. Tensile and compressive material properties of the facings were determined at 116, R.T., and 589 K (-250, R.T., and 600 F) using the sandwich beam flexure test method. Results indicate that Gr/PI is a usable structural material for short term use at temperatures as high as 589 K (600 F). Buckling specimens were 30.5 X 33.0 cm (12 x 13 in.), had quasi-isotropic symmetric facings and a glass/polyimide honeycomb core. Core thicknesses varied and three panels of each thickness were tested in edgewise compression at room temperature to investigate failure modes and corresponding buckling formulas. Specimens 0.635 cm (0.25 in.) thick failed by overall buckling at loads close to the analytically predicted buckling load; all other panels failed by face wrinkling. Results of the winkling tests indicate that several buckling formulas were unconservative and therefore not suitable for design purposes; recommended wrinkling equations are presented.

Camarda, C. J.↗

NASA NTRS1979

TF34 engine compression system computer study

The stability of the fan and the compressor components was examined individually using linearized and time dependent, one dimensional stability analysis techniques. The stability of the fan core integrated compression system was investigated using a two dimensional compression system model. The analytical equations on which this model was based satisfied the mass, axial momentum, radial momentum, and energy conservation equations for flow through a finite control volume. The results gave an accurate simulation of the flow through the compression system. The speed lines of the components were reproduced; the points of instability were accurately predicted; the locations where the instability was initiated in the fan and the core were indicated; and the variation of the bypass ratio during flow throttling was calculated. The validity of the analytical techniques was then established by comparing these results with test data and with results obtained from the steady state cycle deck.

Hosny, W. M.↗

NASA NTRS1981

Fatigue degradation in compressively loaded composite laminates

The effect of imbedded delaminations on the compression fatigue behavior of quasi-isotropic, T300/5208, graphite/epoxy laminates was investigated. Teflon imbedments were introduced during panel layup to create delaminations. Static and constant amplitude (R=10, omega = 10 Hz) fatigue tests were conducted. S-N data and half life residual strength data were obtained. During static compression loading, the maximum deflection of the buckled delaminated region was recorded. Under compression fatigue, growth of the imbedded delamination was identified as the predominant failure mode in most of the test cases. Specimens that exhibited others failures had a single low stiffness ply above the Teflon imbedment. Delamination growth during fatigue was monitored using DIB enhanced radiography. In specimens with buried delaminations, the dye penetrant (DIB) was introduced into the delaminated region through a minute laser drilled hole, using a hypodermic needle. A low kV, microfocus, X-ray unit was mounted near the test equipment to efficiently record the cyclic growth of buried delaminations on Polaroid film.

Ramkumar, R. L.↗

NASA NTRS1982

Compression of magnetic field in a viscous boundary layer

A simple analytical illustration is provided to complement the extensive numerical results already published regarding the compression of the magnetic field that occurs when the closed convective circulation of a viscous fluid with small resistivity breaks up a broad magnetic field into isolated filaments and proceeds to compress those filaments to field strengths beyond equipartition with the convective motions. This compression may occur in the solar corona or in interstellar space but not within the sun.

Parker, E. N.↗

NASA NTRS1982

Failure characteristics of graphite-epoxy structural components loaded in compression

Failure characteristics of compressively loaded graphite-epoxy components are described. Experimental results for both strength-critical laminates and structural components with postbuckling strength are presented. Effects of low speed impact damage and circular holes on compressive strength are discussed. Delamination and shear crippling failure mechanisms that limit the performance of strength-critical laminates are described. Transverse shear and skin-stiffener separation failure mechanisms that limit the performance of components with postbuckling strength are also described. The influence of matrix properties on compressive strength improvements for impact damaged laminates is discussed. Experimental data and results from a failure analysis for strength-critical laminates with cutouts are discussed and compared with impact damage results. Typical postbuckling test results are compared with analytical predictions.

Starnes, J. H., Jr.↗

NASA NTRS1978

Study of communications data compression methods

A simple monochrome conditional replenishment system was extended to higher compression and to higher motion levels, by incorporating spatially adaptive quantizers and field repeating. Conditional replenishment combines intraframe and interframe compression, and both areas are investigated. The gain of conditional replenishment depends on the fraction of the image changing, since only changed parts of the image need to be transmitted. If the transmission rate is set so that only one fourth of the image can be transmitted in each field, greater change fractions will overload the system. A computer simulation was prepared which incorporated (1) field repeat of changes, (2) a variable change threshold, (3) frame repeat for high change, and (4) two mode, variable rate Hadamard intraframe quantizers. The field repeat gives 2:1 compression in moving areas without noticeable degradation. Variable change threshold allows some flexibility in dealing with varying change rates, but the threshold variation must be limited for acceptable performance.

Jones, H. W.↗

NASA NTRS1982

Image data compression application to imaging spectrometers

The potential of image data compression techniques to satisfy the anticipated requirements of imaging spectrometer missions is discussed. Noiseless coding, rate controlled compression, cluster compression, and error protection are addressed.

Rice, R. F.↗

NASA NTRS1982

On-board image compression

Image data compression schemes are discussed with regard to achieving maximum compression ratio. It is demonstrated that the compression ratio must be traded-off against the allowable residual distortion in the reconstructed image.

Lynch, T. J.↗

NASA NTRS1983

Failure analysis of composite laminates including biaxial compression

This report describes a continued effort on the development and application of the tensor polynomial failure criterion for composite laminate analysis. In particular, emphasis is given to the design, construction and testing of a cross-beam laminate configuration to obtain "pure' biaxial compression failure. The purpose of this test case was to provide to permit "closure' of the cubic form of the failure surface in the 1-2 compression-compression quadrant. This resulted in a revised set of interaction strength parameters and the construction of a failure surface which can be used with confidence for strength predictions, assuming a plane stress state exists. Furthermore, the problem of complex conjugate roots which can occur in some failure regions is addressed and an "engineering' interpretation is provided. Results are presented illustrating this behavior and the methodology for overcoming this problem is discussed.

Tennyson, R. C.↗

NASA NTRS1984

Effect of impact damage and open holes on the compression strength of tough resin/high strain fiber laminates

Structural damage and design-based inclusions such as cutouts can reduce significantly the strength of graphite-epoxy laminates. One composite mechanics research activity at the Langley Research Center is to assess and improve the performance of composite structures in strength are common to both tension and compression loaded laminates; however, the problem associated with compression performance is the most illusive to solve. Compression failure involves both shear crippling and delamination modes. Several graphite-epoxy material systems proposed for improved damage-tolerance were studied. Material parameters included both tough resin formulations and high strain fibers.

Williams, J. G.↗

NASA NTRS1983

Pulse compression using binary phase codes

In most MST applications pulsed radars are peak power limited and have excess average power capacity. Short pulses are required for good range resolution, but the problem of range ambiguity (signals received simultaneously from more than one altitude) sets a minimum limit on the interpulse period (IPP). Pulse compression is a technique which allows more of the transmitter average power capacity to be used without sacrificing range resolution. As the name implies, a pulse of power P and duration T is in a certain sense converted into one of power nP and duration T/n. In the frequency domain, compression involves manipulating the phases of the different frequency components of the pulse. One way to compress a pulse is via phase coding, especially binary phase coding, a technique which is particularly amenable to digital processing techniques. This method, which is used extensively in radar probing of the atmosphere and ionosphere is discussed. Barker codes, complementary and quasi-complementary code sets, and cyclic codes are addressed.

Farley, D. T.↗

NASA NTRS1984

Compression failure characteristics of + or - 45-deg-dominated laminates with a circular hole or impact damage

An investigation of the compression failure characteristics of + or - 45-deg-dominated laminates with a circular hole or impact damage was conducted. Graphite-epoxy laminates consisting of all + or - 45-deg plies and of + or - 45-deg and 90-deg plies were evaluated. Inplane shearing between the fibers and matrix (i.e., matrix shearing) was found to be the primary compression failure mechanism for an all + or - 45-deg laminate with a hole. The failure mechanism for the + or 45-deg-dominated laminates with a hole appeared to be a combination of delamination and matrix shearing. The compression failure stresses and strains for both the all + or - 45-deg laminate and the + or - 45-deg-dominated laminates were unaffected by impact damage at an energy level of 5.5 J when compared to results for undamaged control specimens. The failure stresses and strains for all laminates with impact damage at an energy level of 17.0 J or of 34.3 J were significantly lower than the corresponding data for the undamaged control specimens. The failure stresses and strains for these impact-damaged specimens were independent of the percentage of 90-deg plies in the laminate.

Shuart, M. J.↗

NASA NTRS1983

Failure characteristics of graphite-epoxy structural components loaded in compression

Starnes, J. H., Jr.↗

NASA NTRS1984

Two-dimensional compressible convection extending over multiple scale heights

The theoretical description of the dynamics of a stellar convection zone is considered, taking into account one of the most basic issues by studying compressible convection extending over multiple scale heights. A revised version of a code reported by Graham (1975) is employed. Two-dimensional simulations show that nonlinear compressible convection possesses cellular structures with strong localized downward-directed plumes and broader upflows. The horizontal flows which close the circulation within the cell satisfy an approximate Bernoulli integral along a considerable portion of the horizontal trajectory. Attention is given to details regarding the numerical methods, the properties of the numerical solutions, the overall effects of compressibility on nonlinear convection, and a comparison with anelastic modal solutions.

Hurlburt, N. E.↗