Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data reduction methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Real-Time Active Cosmic Neutron Background Reduction Methods

Neutron counting using large arrays of pressurized 3He proportional counters from an aerial system or in a maritime environment suffers from the background counts from the primary cosmic neutrons and secondary neutrons caused by cosmic ray-induced mechanisms like spallation and charge-exchange reaction. This paper reports the work performed at the Remote Sensing Laboratory–Andrews (RSL-A) and results obtained when using two different methods to reduce the cosmic neutron background in real time. Both methods used shielding materials with a high concentration (up to 30% by weight) of neutron-absorbing materials, such as natural boron, to remove the low-energy neutron flux from the cosmic background as the first step of the background reduction process. Our first method was to design, prototype, and test an up-looking plastic scintillator (BC-400, manufactured by Saint Gobain Corporation) to tag the cosmic neutrons and then create a logic pulse of a fixed time duration (~120 μs) to block the data taken by the neutron counter (pressurized 3He tubes running in a proportional counter mode). The second method examined the time correlation between the arrival of two successive neutron signals to the counting array and calculated the excess of variance (Feynman variance Y2F)1 in the neutron count distribution from Poisson distribution. The dilution of this variance from cosmic background values ideally would signal the presence of man-made neutrons.2 The first method has been technically successful in tagging the neutrons in the cosmic-ray flux and preventing them from being counted in the 3He tube array by electronic veto—field measurement work shows the efficiency of the electronic veto counter to be about 87%. The second method has successfully derived an empirical relationship between the percentile non-cosmic component in a neutron flux and the Y2F of the measured neutron count distribution. By using shielding materials alone, approximately 55% of the neutron flux from man-made sources like 252Cf or Am-Be was removed.

Neutron counting, cosmic background, ship effect, ↗

Determination of propulsion-system-induced forces and moments of a Mach 3 cruise aircraft

During the joint NASA/USAF flight research program with the YF-12 airplane, the Dutch roll damping was found to be much less during automatic inlet operation than during fixed inlet operation at Mach numbers greater than 2.5 and with the yaw stability augmentation system off. It was concluded that the significant reduction in Dutch roll damping was due to the forces and moments induced by the variable-geometry features of the inlet. Two stability-derivative extraction techniques were applied to the flight data; the recently developed Newton-Raphson technique and the time vector method. These techniques made it possible to determine the forces and moments generated by spike and bypass door movement.

Gilyard, G. B.↗

Automatic welding of stainless steel tubing

The use of automatic welding for making girth welds in stainless steel tubing was investigated as well as the reduction in fabrication costs resulting from the elimination of radiographic inspection. Test methodology, materials, and techniques are discussed, and data sheets for individual tests are included. Process variables studied include welding amperes, revolutions per minute, and shielding gas flow. Strip chart recordings, as a definitive method of insuring weld quality, are studied. Test results, determined by both radiographic and visual inspection, are presented and indicate that once optimum welding procedures for specific sizes of tubing are established, and the welding machine operations are certified, then the automatic tube welding process produces good quality welds repeatedly, with a high degree of reliability. Revised specifications for welding tubing using the automatic process and weld visual inspection requirements at the Kennedy Space Center are enumerated.

Clautice, W. E.↗

Internal performance characteristics of short convergent-divergent exhaust nozzles designed by the method of characteristics

Internal performance data on a short exhaust nozzle designed by the method of characteristics were obtained over a range of pressure ratios from 1.5 to 22. The peak thrust coefficient was not affected by a shortened divergent section, but it occurred at lower pressure ratios due to reduction in expansion ratio. This nozzle contour based on characteristics solution gave higher thrust coefficients than a conical convergent-divergent nozzle of equivalent length. Abrupt-inlet sections permitted a reduction in nozzle length without a thrust-coefficient reduction.

Krull, H George↗

Separating Physics and Dynamics Grids for Improved Computational Efficiency in Spectral Element Earth System Models

Previous studies have shown that atmospheric models with a spectral element grid can benefit from putting physics calculations on a relatively coarse finite volume grid. Here we demonstrate an alternative high-order, element-based mapping approach used to implement a quasi-equal-area, finite volume physics grid in E3SM. Unlike similar methods, the new method in E3SM requires topology data purely local to each spectral element, which trivially allows for regional mesh refinement. Simulations with physics grids defined by 2 × 2, 3 × 3, and 4 × 4 divisions of each element are shown to verify that the alternative physics grid does not qualitatively alter the model solution. The model performance is substantially affected by the reduction of physics columns when using the 2 × 2 grid, which can increase the throughput of physics calculations by roughly 60%–120% depending on whether the computational resources are configured to maximize throughput or efficiency. A pair of regionally refined cases are also shown to highlight the refinement capability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New Techniques for High-Contrast Imaging with ADI: The ACORNS-ADI SEEDS Data Reduction Pipeline

We describe Algorithms for Calibration, Optimized Registration, and Nulling the Star in Angular Differential Imaging (ACORNS-ADI), a new, parallelized software package to reduce high-contrast imaging data, and its application to data from the Strategic Exploration of Exoplanets and Disks (SEEDS) survey. We implement seyeral new algorithms, includbg a method to centroid saturated images, a trimmed mean for combining an image sequence that reduces noise by up to approx 20%, and a robust and computationally fast method to compute the sensitivitv of a high-contrast obsen-ation everywhere on the field-of-view without introducing artificial sources. We also include a description of image processing steps to remove electronic artifacts specific to Hawaii2-RG detectors like the one used for SEEDS, and a detailed analysis of the Locally Optimized Combination of Images (LOCI) algorithm commonly used to reduce high-contrast imaging data. ACORNS-ADI is efficient and open-source, and includes several optional features which may improve performance on data from other instruments. ACORNS-ADI is freely available for download at www.github.com/t-brandt/acorns_-adi under a BSD license

Brandt, Timothy D.↗

MULTILEVEL ACCELERATION OF STOCHASTIC COLLOCATION METHODS FOR PDE WITH RANDOM INPUT DATA

Stochastic Collocation (SC) methods for stochastic partial differential equa- tions (SPDEs) suffer from the curse of dimensionality, whereby increases in the stochastic dimension cause an explosion of computational effort. To combat these challenges, multilevel approximation methods seek to decrease computational complexity by balancing spatial and stochastic discretization errors. As a form of variance reduction, multilevel techniques have been successfully applied to Monte Carlo (MC) methods, but may be extended to accelerate other methods for SPDEs in which the stochastic and spatial degrees of freedom are de- coupled. This article presents general convergence and computational complexity analysis of a multilevel method for SPDEs, demonstrating its advantages with regard to standard, single level approximation. The numerical results will highlight conditions under which multilevel sparse grid SC is preferable to the more traditional MC and SC approaches.

Webster, Clayton G↗

SU-E-T-395: Multi-GPU-Based VMAT Treatment Plan Optimization Using a Column-Generation Approach

Purpose: GPU has been employed to speed up VMAT optimizations from hours to minutes. However, its limited memory capacity makes it difficult to handle cases with a huge dose-deposition-coefficient (DDC) matrix, e.g. those with a large target size, multiple arcs, small beam angle intervals and/or small beamlet size. We propose multi-GPU-based VMAT optimization to solve this memory issue to make GPU-based VMAT more practical for clinical use. Methods: Our column-generation-based method generates apertures sequentially by iteratively searching for an optimal feasible aperture (referred as pricing problem, PP) and optimizing aperture intensities (referred as master problem, MP). The PP requires access to the large DDC matrix, which is implemented on a multi-GPU system. Each GPU stores a DDC sub-matrix corresponding to one fraction of beam angles and is only responsible for calculation related to those angles. Broadcast and parallel reduction schemes are adopted for inter-GPU data transfer. MP is a relatively small-scale problem and is implemented on one GPU. One headand- neck cancer case was used for test. Three different strategies for VMAT optimization on single GPU were also implemented for comparison: (S1) truncating DDC matrix to ignore its small value entries for optimization; (S2) transferring DDC matrix part by part to GPU during optimizations whenever needed; (S3) moving DDC matrix related calculation onto CPU. Results: Our multi-GPU-based implementation reaches a good plan within 1 minute. Although S1 was 10 seconds faster than our method, the obtained plan quality is worse. Both S2 and S3 handle the full DDC matrix and hence yield the same plan as in our method. However, the computation time is longer, namely 4 minutes and 30 minutes, respectively. Conclusion: Our multi-GPU-based VMAT optimization can effectively solve the limited memory issue with good plan quality and high efficiency, making GPUbased ultra-fast VMAT planning practical for real clinical use.

60 APPLIED LIFE SCIENCES↗

Progressive cone beam CT dose control in image-guided radiation therapy

Purpose: Cone beam CT (CBCT) in image-guided radiotherapy (IGRT) offers a tremendous advantage for treatment guidance. The associated imaging dose is a clinical concern. One unique feature of CBCT-based IGRT is that the same patient is repeatedly scanned during a treatment course, and the contents of CBCT images at different fractions are similar. The authors propose a progressive dose control (PDC) scheme to utilize this temporal correlation for imaging dose reduction. Methods: A dynamic CBCT scan protocol, as opposed to the static one in the current clinical practice, is proposed to gradually reduce the imaging dose in each treatment fraction. The CBCT image from each fraction is processed by a prior-image based nonlocal means (PINLM) module to enhance its quality. The increasing amount of prior information from previous CBCT images prevents degradation of image quality due to the reduced imaging dose. Two proof-of-principle experiments have been conducted using measured phantom data and Monte Carlo simulated patient data with deformation. Results: In the measured phantom case, utilizing a prior image acquired at 0.4 mAs, PINLM is able to improve the image quality of a CBCT acquired at 0.2 mAs by reducing the noise level from 34.95 to 12.45 HU. In the synthetic patient case, acceptable image quality is maintained at four consecutive fractions with gradually decreasing exposure levels of 0.4, 0.1, 0.07, and 0.05 mAs. When compared with the standard low-dose protocol of 0.4 mAs for each fraction, an overall imaging dose reduction of more than 60% is achieved. Conclusions: PINLM-PDC is able to reduce CBCT imaging dose in IGRT utilizing the temporal correlations among the sequence of CBCT images while maintaining the quality.

61 RADIATION PROTECTION AND DOSIMETRY↗

Ionization potential and electron affinity for six common explosive compounds by DFT, MP2, and CBS-QB3

The vertical and adiabatic ionization potential (IP V and IP A ) and vertical electron affinity (EA V ) for six explosives (RDX, HMX, TNT, PETN, HMTD, and TATP) have been studied by ab initio computational methods. The IPV was calculated using MP2 and CBS-QB3 while the IP A was calculated with B3LYP, CAM-B3LYP, ω B97XD, B2PLYP, and MP2. RDX and TNT IP A ’s were also reported using CBS -QB3. Excluding results by CBS-QB3, B3LYP and B2PLYPD provided superior and more consistent results for calculating the IP. The EA V were calculated using the same methods however B3LYP performed the worst in this case with MP2 and B2PLYPD predicting values closest to those made by CBS-QB3, which was used a reference due to lacking experimental data. Basis set effects were evaluated using 6- 31+G(d,p), 6-311+G(d,p), and 6-311+(3df,2p) for both IP and EA. 6-31+G(d,p) gave satisfactory results for calculating both IP however 6-311+G(3df,2p) had improved results in calculating the EA. The four nitro containing compounds had exothermic reduction potentials while the peroxides were unfavorable. Additionally, it was seen that RDX, HMX, TATP and HMTD were unstable in their reduced forms. Results are aimed to assist detection and screening methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monotonic Gaussian Process for Physics-Constrained Machine Learning With Materials Science Applications

Physics-constrained machine learning is emerging as an important topic in the field of machine learning for physics. One of the most significant advantages of incorporating physics constraints into machine learning methods is that the resulting model requires significantly less data to train. By incorporating physical rules into the machine learning formulation itself, the predictions are expected to be physically plausible. Gaussian process (GP) is perhaps one of the most common methods in machine learning for small datasets. In this paper, we investigate the possibility of constraining a GP formulation with monotonicity on three different material datasets, where one experimental and two computational datasets are used. The monotonic GP is compared against the regular GP, where a significant reduction in the posterior variance is observed. The monotonic GP is strictly monotonic in the interpolation regime, but in the extrapolation regime, the monotonic effect starts fading away as one goes beyond the training dataset. Imposing monotonicity on the GP comes at a small accuracy cost, compared to the regular GP. The monotonic GP is perhaps most useful in applications where data are scarce and noisy, and monotonicity is supported by strong physical evidence.

36 MATERIALS SCIENCE↗

Reconstruction of jointly sparse vectors via manifold optimization

In this paper, we consider the challenge of reconstructing jointly sparse vectors from linear measurements. Firstly, we show that by utilizing the rank of the output data matrix we can reduce the problem to a full column rank case. This result reveals a reduction in the computational complexity of the original problem and enables a simple implementation of joint sparse recovery algorithms for full-rank setting. Secondly, we propose a new method for joint sparse recovery in the form of a non-convex optimization problem on a non-compact Stiefel manifold. In our numerical experiments our method outperforms the commonly used l 2,1 minimization in the sense that much fewer measurements are required for accurate sparse reconstructions. Here, we postulate this approach possesses the desirable rank aware property, that is, being able to take advantage of the rank of the unknown matrix to improve the recovery.

97 MATHEMATICS AND COMPUTING↗

NEW APPROACHES TO PHOTOMETRIC REDSHIFT PREDICTION VIA GAUSSIAN PROCESS REGRESSION IN THE SLOAN DIGITAL SKY SURVEY

Expanding upon the work of Way and Srivastava we demonstrate how the use of training sets of comparable size continue to make Gaussian process regression (GPR) a competitive approach to that of neural networks and other least-squares fitting methods. This is possible via new large-size matrix inversion techniques developed for Gaussian processes (GPs) that do not require that the kernel matrix be sparse. This development, combined with a neural-network kernel function appears to give superior results for this problem. Our best-fit results for the Sloan Digital Sky Survey (SDSS) Main Galaxy Sample using u, g, r, i, z filters gives an rms error of 0.0201 while our results for the same filters in the luminous red galaxy sample yield 0.0220. We also demonstrate that there appears to be a minimum number of training-set galaxies needed to obtain the optimal fit when using our GPR rank-reduction methods. We find that morphological information included with many photometric surveys appears, for the most part, to make the photometric redshift evaluation slightly worse rather than better. This would indicate that most morphological information simply adds noise from the GP point of view in the data used herein. In addition, we show that cross-match catalog results involving combinations of the Two Micron All Sky Survey, SDSS, and Galaxy Evolution Explorer have to be evaluated in the context of the resulting cross-match magnitude and redshift distribution. Otherwise one may be misled into overly optimistic conclusions.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis and Benchmarking of feature reduction for classification under computational constraints

Abstract Machine learning is most often expensive in terms of computational and memory costs due to training with large volumes of data. Current computational limitations of many computing systems motivate us to investigate practical approaches, such as feature selection and reduction, to reduce the time and memory costs while not sacrificing the accuracy of classification algorithms. In this work, we carefully review, analyze, and identify the feature reduction methods that have low costs/overheads in terms of time and memory. Then, we evaluate the identified reduction methods in terms of their impact on the accuracy, precision, time, and memory costs of traditional classification algorithms. Specifically, we focus on the least resource intensive feature reduction methods that are available in Scikit-Learn library. Since our goal is to identify the best performing low-cost reduction methods, we do not consider complex expensive reduction algorithms in this study. In our evaluation, we find that at quadratic-scale feature reduction, the classification algorithms achieve the best trade-off among competitive performance metrics. Results show that the overall training times are reduced 61%, the model sizes are reduced 6×, and accuracy scores increase 25% compared to the baselines on average with quadratic scale reduction.

97 MATHEMATICS AND COMPUTING↗

Efficient Uncertainty Quantification in Stochastic Economic Dispatch

Stochastic economic dispatch models usually address uncertainties in forecasts of renewable generation output by considering a finite number of realizations drawn from a stochastic process model, typically via Monte Carlo sampling. Accurate evaluations of expectations or higher order moments for quantities of interest, e.g., generating cost, can require a prohibitively large number of samples. We propose an alternative to Monte Carlo sampling based on polynomial chaos expansions. These representations enable efficient and accurate propagation of uncertainties in model parameters, using sparse quadrature methods. Furthermore, we use Karhunen-Loève expansions for efficient representation of uncertain renewable energy generation that follows geographical and temporal correlations derived from historical data at each wind farm. Considering expected production cost, we show that the proposed approach can yield several orders of magnitude reduction in computational cost for solving stochastic economic dispatch relative to Monte Carlo sampling, for a given target error threshold.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Metal artifact reduction strategies for improved attenuation correction in hybrid PET/CT imaging

Metallic implants are known to generate bright and dark streaking artifacts in x-ray computed tomography (CT) images, which in turn propagate to corresponding functional positron emission tomography (PET) images during the CT-based attenuation correction procedure commonly used on hybrid clinical PET/CT scanners. Therefore, visual artifacts and overestimation and/or underestimation of the tracer uptake in regions adjacent to metallic implants are likely to occur and as such, inaccurate quantification of the tracer uptake and potential erroneous clinical interpretation of PET images is expected. Accurate quantification of PET data requires metal artifact reduction (MAR) of the CT images prior to the application of the CT-based attenuation correction procedure. In this review, the origins of metallic artifacts and their impact on clinical PET/CT imaging are discussed. Moreover, a brief overview of proposed MAR methods and their advantages and drawbacks is presented. Although most of the presented MAR methods are mainly developed for diagnostic CT imaging, their potential application in PET/CT imaging is highlighted. The challenges associated with comparative evaluation of these methods in a clinical environment in the absence of a gold standard are also discussed.

07 ISOTOPE AND RADIATION SOURCES↗

XPCA - R Implementation

Principal component analysis (PCA) is arguably the most popular tool in multivariate exploratory data analysis. We consider the question of how to handle heterogeneous variables that include continuous, binary, and ordinal. In the probabilistic interpretation of low-rank PCA, the data has a normal multivariate distribution and, therefore, normal marginal distributions for each column. If some marginals are continuous but not normal, the semiparametric copula-based principal component analysis (COCA) method is an alternative to PCA that combines a Gaussian copula with nonparametric marginals. If some marginals are discrete or semi-continuous, we present a new extended PCA (XPCA) method that also uses a Gaussian copula and nonparametric marginals and accounts for discrete variables in the likelihood calculation by integrating over appropriate intervals. Like PCA, the factors produced by XPCA can be used to find latent structure in data, build predictive models, and perform dimensionality reduction. We implement the new model, XPCA, and its ancestors PCA and COCA in both R and Python. This software provides implementations of XPCA, COCA, and probabilistic PCA in both R and Python. XPCA is written in arXiv report https://arxiv.org/abs/1808.07510. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525. SAND2019-10591 M

Kincher-Winoto, Kina↗

XPCA -Python Implementation

Principal component analysis (PCA) is arguably the most popular tool in multivariate exploratory data analysis. We consider the question of how to handle heterogeneous variables that include continuous, binary, and ordinal. In the probabilistic interpretation of low-rank PCA, the data has a normal multivariate distribution and, therefore, normal marginal distributions for each column. If some marginals are continuous but not normal, the semiparametric copula-based principal component analysis (COCA) method is an alternative to PCA that combines a Gaussian copula with nonparametric marginals. If some marginals are discrete or semi-continuous, we present a new extended PCA (XPCA) method that also uses a Gaussian copula and nonparametric marginals and accounts for discrete variables in the likelihood calculation by integrating over appropriate intervals. Like PCA, the factors produced by XPCA can be used to find latent structure in data, build predictive models, and perform dimensionality reduction. We implement the new model, XPCA, and its ancestors PCA and COCA in both R and Python. This software provides implementations of XPCA, COCA, and probabilistic PCA in both R and Python. XPCA is written in arXiv report https://arxiv.org/abs/1808.07510. SAND2019-10591 M Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Kincher-Winoto, Kina↗