Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Nonstoichiometric BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} multiferroic ceramics with ultrahigh electrical resistivity

BiFeO{sub 3}, BiFe{sub 0.9}Ti{sub 0.1}O{sub 3}, and BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} ceramics of relatively high perovskite phase content were prepared for a comparison study. While both BiFe{sub 0.9}Ti{sub 0.1}O{sub 3} and BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} exhibit similarly improved weak ferromagnetism over BiFeO{sub 3}, there exists a major difference in the x-ray diffraction patterns of BiFe{sub 0.9}Ti{sub 0.1}O{sub 3} and BiFe{sub 0.9}Ti{sub 0.05}O{sub 3}, and the leakage current of BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} is decreased by five orders of magnitude from that of BiFe{sub 0.9}Ti{sub 0.1}O{sub 3}. With an ultrahigh electrical resistivity, over 1x10{sup 14} {Omega} cm, BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} ceramic displays an especially low dielectric loss, 0.015 at 100 Hz, a remanent polarization P{sub r} of 0.23 {mu}C/cm{sup 2} and a remanent magnetization M{sub r} of 0.13 emu/g at room temperature. It is proposed that the Fe-deficiency in BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} decreases the amount of Fe{sup 2+} and leads to the ultrahigh electrical resistivity. Nonstoichiometric compositions should receive more attention for developing high quality BiFeO{sub 3} multiferroic materials.

36 MATERIALS SCIENCE↗

Inducing multiple functionalities in ZnS nanoparticles by doping Ni{sup +2} ions

Graphical abstract: Figure shows spherical ZnS nanoparticle (light red) containing Ni as dopant ions (light green inside) exhibiting both optical (straight lines) as well as magnetic (elliptical field lines) activities simultaneously. Highlights: ► A simple method has been adopted to synthesize Ni{sup +2} doped ZnS nanoparticles. ► The enhancing and quenching of the PL intensity depended upon ‘purity of the phase’. ► The change in packing of the molecules in ZnS NPs directly depended on concentration of dopant. ► Magnetic and optical properties were found to be dopant dependent (e.g. Ni{sup +2} ions). ► Proper choice of solvent for synthesis shows a marked effect on magnetism. - Abstract: In this study, we propose that it is possible to induce multiple functionalities such as optical activity, electrical conductance and magnetism in single ZnS/Ni nanoparticles and exploit the same by only changing the external stimuli such as magnetic field, wavelength of light, electric field etc. Such type of material finds great significance in the field of electronics as well as in bioimaging. For the purpose, we have synthesized cubic ZnS:Ni{sup 2+} nanoparticles (NPs) using a simple wet-chemical method. Synthesized ZnS:Ni{sup 2+} NPs had been characterized by X-ray diffraction pattern (XRD) and energy dispersive X-ray (EDX) analysis. The amounts of Ni and Zn in the material were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Morphology of the NPs is studied by transmission electron microscopy (TEM). Optical studies are carried out using UV–visible (UV–Vis) and Photoluminescence (PL) spectroscopies. Quantum efficiency of the material was also computed. The enhancement and quenching of the PL intensity are correlated with the ‘purity of the phase’. It is observed that change in packing of the molecules of the host material directly depended on concentration of dopant ion. The thermal study of the material was carried out using differential scanning calorimetry (DSC) to support the earlier proposition. Magnetic hysteresis behavior was studied using vibrating sample magnetometer (VSM). An interesting phenomenon of defect-induced magnetism was observed, which was enhanced on doping with Ni{sup +2}.

36 MATERIALS SCIENCE↗

Synthesis and Characterization, Thermal Stability and Magnetic Properties of Metallic Glass Free Layer of Magnetic Tunnel Junctions

Ferromagnetic CoFeSiB and NiFeSiB metallic glasses were produced to study the thermal and magnetic properties of glassy alloys which show the good performance for free layers in the Magnetic tunnel junctions (MTJs). The characters of amorphous materials are compared with crystalline materials composed of CoFe and NiFe. X-ray diffraction pattern was used to confirm the amorphous and crystalline state of melt-spun ribbons. The thermal stability and crystallization processes were investigated by differential scanning calorimeter (DSC). The thermal properties of amorphous alloys represent by the parameters; glass transition temperature (>580 deg. K), crystallization temperature (<830 deg. K), the large supercooled liquid region ({delta}T = Tx-Tg), the reduced glass transition temperature (Trg = Tg/Tm). The alloys exhibit the soft magnet properties of high saturated magnetization (Ms), low coercive force (Hc) and high effective permeability ({mu}e) represented to the hyeteresis loops. The magnetic characters for all alloys are measured by vibrating sample magnetometer (VSM). Amorphous ferromagnetic free layers in MTJs have a lower Ms and a higher anisotropy constant than crystalline layers. The experimental results explain how the metallic glass for free layer performs better than crystal. The good combination of thermal and magnetic properties in the amorphous material indicates the possibility of application as the glassy magnetic material.

36 MATERIALS SCIENCE↗

Field evolution of the magnetic structures in Er{sub 2}Ti{sub 2}O{sub 7} through the critical point

We have measured neutron-diffraction patterns in a single-crystal sample of the pyrochlore compound Er{sub 2}Ti{sub 2}O{sub 7} in the antiferromagnetic phase (T=0.3 K), as a function of the magnetic field, up to 6 T, applied along the [110] direction. We determine all the characteristics of the magnetic structure throughout the critical point at H{sub c}=2 T. As a main result, all Er moments align along the field at H{sub c} and their values reach a minimum. Using a four-sublattice self-consistent calculation, we show that the evolution of the magnetic structure and the value of the critical field are rather well reproduced using the same anisotropic exchange tensor as that accounting for the local paramagnetic susceptibility. In contrast, an isotropic exchange tensor does not yield the correct moment variations through the critical point. The model also accounts semiquantitatively for other experimental data obtained in previous works, such as the field dependence of the heat capacity, energy of the dispersionless inelastic modes and transition temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure–volume Equation of State of FeAu and FePt

X-ray diffraction patterns of FeAu and FePt have been measured at pressures up to {approx}55 GPa with good signal-to-noise ratio and high resolution using synchrotron radiation. Rietveld analysis has been performed. The structure of FeAu is cubic in space group Fm{bar 3}m with a lattice parameter a = 3.9634 {+-} 0.0012 {angstrom}. A third-order Birch-Murnaghan equation of state fit to the experimental data yields V{sub 0} = 62.26 {+-} 0.05 {angstrom}{sup 3}, with a B{sub 0} of 180.6 {+-} 4.7 GPa and B'{sub 0} = 3.5 {+-} 0.3. The structure of FePt is tetragonal in space group P4/mmm with lattice parameters a = b = 2.6748 {+-} 0.0005 {angstrom} and c = 3.7375 {+-} 0.0008 {angstrom}. A third-order Birch-Murnaghan equation of state fit to the experimental data yields V{sub 0} = 26.74 {+-} 0.01 {angstrom}{sup 3}, with a B{sub 0} of 264.1 {+-} 9.8 GPa and B'{sub 0} = 5.0 {+-} 0.7.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of intensive milling in the processing of barium ferrite/magnetite/iron hybrid magnetic nano-composites via partial reduction of barium ferrite

In this research a mixture of barium ferrite and graphite was milled for different periods of time and then heat treated at different temperatures. The effects of milling time and heat treatment temperature on the phase composition, thermal behavior, morphology and magnetic properties of the samples have been investigated using X-ray diffraction, differential thermal analysis, high resolution transmission electron microscopy and vibrating sample magnetometer techniques, respectively. X-ray diffraction results revealed that BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} nanocomposites form after a 20 h milling due to the partial reduction of BaFe{sub 12}O{sub 19}. High resolution transmission electron microscope images of a 40 h milled sample showed agglomerated structure consisting of nanoparticles with a mean particle size of 30 nm. Thermal analysis of the samples via differential thermal analysis indicated that for un-milled samples, heat treatment up to 900 °C did not result in α-Fe formation, while for a 20 h milled sample heat treatment at 700 °C resulted in reduction process progress to the formation of α-Fe. Wustite was disappeared in an X-ray diffraction pattern of a heat treated sample at 850 °C, by increasing the milling time from 20 to 40 h. By increasing the milling time, the structure of heat treated samples becomes magnetically softer due to an increase in saturation magnetization and a decrease in coercivity. Saturation magnetization and coercivity of a sample milled for 20 h and heat treated at 850 °C were 126.3 emu/g and 149.5 Oe which by increasing the milling time to 40 h, alter to 169.1 emu/g and 24.3 Oe, respectively. High coercivity values of milled and heat treated samples were attributed to the nano-scale formed iron particles. - Graphical abstract: Display Omitted - Highlights: • Barium ferrite and graphite were treated mechano-thermally. • Increasing milling time increases reduction progress after heat treatment. • Composites including iron nano-crystals forms by milling and heat treatment. • Shorter milling time results in higher H{sub C} of the milled and heat treated samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synchrotron X-ray powder diffraction and convergent beam electron diffraction studies on the cubic phase of MgV{sub 2}O{sub 4} spinel

The A V{sub 2}O{sub 4} (A=Mg{sup 2+}, Zn{sup 2+}, Cd{sup 2+}) spinels are three-dimensional spin-1 frustrated systems with orbital degree of freedom, which have been known to possess intriguing orbital states causing releases of spin frustration at low temperatures. We have performed synchrotron X-ray and convergent beam electron diffraction measurements for one of these vanadates, MgV{sub 2}O{sub 4} in order to clarify its crystal structure in the high temperature cubic phase, which is regarded as an important starting point for understanding the details of the low temperature phase. We have successfully observed that the [001] zone axis convergent beam electron diffraction pattern exhibits 4mm symmetry, suggesting the space group of Fd3{sup ¯}m in the cubic MgV{sub 2}O{sub 4}. It has also been demonstrated that the crystal structure of the cubic MgV{sub 2}O{sub 4} contains VO{sub 6} octahedra elongated along the threefold rotation axis. Based on our results, we discuss the orbital states of MgV{sub 2}O{sub 4} as well as the other spinel vanadates. - Graphical abstract: Precise geometry of the VO{sub 6} octahedra in the cubic phase of MgV{sub 2}O{sub 4} spinel determined with the synchrotron powder XRD data. - Highlights: • We examined the crystal structure of the cubic phase of MgV{sub 2}O{sub 4} spinel. • We prepared the single crystal and powdered sample of MgV{sub 2}O{sub 4} with high quality. • The result of the CBED measurement agrees with the space group of Fd3{sup ¯}m in the phase. • The cubic phase has VO{sub 6} octahedra elongated along the threefold rotation axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and dielectric properties of a rare earth double perovskite oxide Ba{sub 2}CeTaO{sub 6}

Highlights: {yields} A single phase Ba{sub 2}CeTaO{sub 6} (BCT) having monoclinic structure is synthesized. {yields} Impedance spectroscopy is applied to investigate the ac electrical properties of BCT. {yields} Complex impedance plane plots show grain contribution for BCT. {yields} The frequency dependent conductivity spectra follow the power law. -- Abstract: A rare earth double perovskite oxide barium cerium tantalate, Ba{sub 2}CeTaO{sub 6} (BCT) is synthesized by solid-state reaction. The X-ray diffraction pattern of the sample at room temperature (25 {sup o}C) shows monoclinic structure, with the lattice parameters, a = 9.78 A, b = 9.02 A and c = 4.27 A and {beta} = 93.8{sup o}. A scanning electron micrograph shows the formation of grains with average size {approx} 2 {mu}m. Impedance spectroscopy is applied to investigate the ac electrical properties of BCT in a temperature range from 303 to 673 K and in a frequency range from 100 Hz to 1 MHz. Complex-impedance-plane plots show grain contribution for BCT. The frequency-dependent electrical data are analyzed in the framework of the conductivity and modulus formalisms. The frequency-dependent conductivity spectra follow a power law. The conductivity at 110 Hz varies from 3.5 x 10{sup -7} S m{sup -1} to 1.2 x 10{sup -2} S m{sup -1} with increasing temperature from 303 to 673 K, respectively. The scaling behaviour of M'' and Z'' suggest that the relaxation describes the same mechanism at various temperatures.

36 MATERIALS SCIENCE↗

Longitudinal spin Seebeck effect in Nd{sub 2}BiFe{sub 5−x}Ga{sub x}O{sub 12} prepared on gadolinium gallium garnet (001) by metal organic decomposition method

Nd{sub 2}BiFe{sub 5−x}Ga{sub x}O{sub 12} thin films with the Ga composition x = 0, 0.5, and 1.0 are prepared on (001) oriented gadolinium gallium garnet substrates by a metal organic decomposition method. Only (001) peaks are observed in x-ray diffraction patterns for all the films, suggesting that the highly oriented Nd{sub 2}BiFe{sub 5−x}Ga{sub x}O{sub 12} thin films were formed. Increasing Ga composition, the saturation magnetization decreases, and the perpendicular easy axis is enhanced due to the decrease of the shape anisotropy. Longitudinal spin Seebeck effects (LSSEs) in Nd{sub 2}BiFe{sub 5−x}Ga{sub x}O{sub 12} thin films with a Pt layer of 10 nm in thickness were investigated. Magnetic field dependence of the thermoelectric voltage caused by the LSSE in Nd{sub 2}BiFe{sub 5−x}Ga{sub x}O{sub 12} films indicates the hysteresis loop with the small coercivity reflecting the magnetization curve. The decrease of LSSE voltage in Nd{sub 2}BiFe{sub 5−x}Ga{sub x}O{sub 12} is clearly observed with the decrease of Fe composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alternating current magnetic susceptibility and heat dissipation by Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} nanoparticles for hyperthermia treatment

Mn-Zn ferrite, Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} nanoparticles encapsulated in amorphous SiO{sub 2} were prepared using our original wet chemical method. X-ray diffraction patterns confirmed that the diameters of these particles were within 7–30 nm. Magnetization measurements for various sample compositions revealed that the saturation magnetization (M{sub s}) of 7 nm particles was maximum for the x = 0.2 sample. AC magnetic susceptibility measurements were performed for Mn{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} (x = 0.2) samples with 13–30 nm particles. The peak of the imaginary part of the magnetic susceptibility χ″ shifted to higher temperatures as the particle size increased. An AC field was found to cause the increase in temperature, with the 18 nm particles exhibiting the highest temperature increase, as expected. In addition, in vitro experiments were carried out to study the hyperthermia effects of Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (x = 0.2, 18 nm) particles on human cancer cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure dependent electrical properties of Ni-Mg-Cu nano ferrites

Nano ferrites with the general chemical formula Ni{sub 0.5}Mg{sub x}Cu{sub 1-x} Fe{sub 2}O{sub 4} were synthesized by chemical route. They were characterized by x-ray diffraction by powder method. The diffraction patterns confirm the formation of single phase ferrites. The particle size is calculated by Scherrer formula which varies between 20nm to 60nm. DC resistivity was measured as a function of composition from room temperature to 700{sup o} C by two probe method. These ferrites show higher resistivity than those synthesized by ceramic method, due to control over composition and morphology. This leads to the elimination of domain wall resonance so that the materials can work at higher frequencies. AC resistivity was measured as a function of frequency at room temperature. Dielectric dispersion obeys Maxwell - Wagner model, in accordance with Koop’s phenomenological theory. The variation of loss angle follows the variation of ac resistivity with frequency and composition. The change in ac conductivity with frequency obeys the power law σ{sub a} = B.ω{sup n}. Such a behavior suggests that conductivity is due to polarons in all the samples.

36 MATERIALS SCIENCE↗

Fabrication and characterization of pristine and annealed Ga doped ZnO thin films using sputtering

ZnO is a wide-band gap, transparent, polar semiconductor with unparalleled optoelectronic, piezoelectric, thermal and transport properties, which make it the material of choice for a wide range of applications such as blue/UV optoelectronics, energy conversion, transparent electronics, spintronic, plasmonic and sensor devices. We report, three sets of Ga doped Zinc Oxide (GZO) were fabricated in different sputtering power (100 watt, 200 watt and 300 watt). Thereafter films were annealed in nitrogen ambient for 30 minutes at 400° C. From the optical absorption spectroscopy it was found that pristine films are showing a 75% transmittance in the visible region of light and it increases after the annealing. However, for 300 W grown sample opposite trend has been achieved for the post annealed sample. X-ray diffraction pattern of all the pristine and annealed films showed a preferable growth orientation at (002) phase. Some other weak peaks were also appeared in different angle which indicates that films are polycrystalline in nature. XRD data also reveals that crystallite size increases with sputtering power up to 200 W and thereafter it decreases with the deposition power. It also noted that the crystallite size of the annealed film increases with compare to the non annealed films. At room temperature an enhancement in electrical properties of Ga doped ZnO thin films was noted for the annealed ZnO films except for the film deposited at 300 watt. More significantly, it was found that annealed thin films showed the resistivity in the range of 10{sup −3} ∼ 10{sup −4} ohm-cm. Such a high optical transmittance and conducting zinc-oxide thin film can be used as a window layer in solar cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Angular-Dependent Vortex Pinning Properties of YBa{sub 2}Cu{sub 3}O{sub 7−δ}/Y{sub 2}O{sub 3} Quasi-Multilayers

A series of quasi-multilayers of YBa{sub 2}Cu{sub 3}O{sub 7−δ} (YBCO)/Y{sub 2}O{sub 3} specifically 70 × (m YBCO/n Y{sub 2}O{sub 3}) were prepared on SrTiO{sub 3} single crystal using pulsed-laser deposition (PLD) with a controlled deposition pulses of m = 40 and n = 2, 5, and 10 for YBCO and Y{sub 2}O{sub 3}, respectively. The x-ray diffraction patterns indicate that all the present quasi-multilayers exhibit good c-axis orientation. The angular dependence of critical current density (J{sub c}) on applied magnetic field directions are systemically measured to study the anisotropic vortex pinning performances for those quasi-multilayers. It is revealed that compared with the pure YBCO films, the quasi-multilayers with n = 2, i.e., a proper constituent pulse of Y{sub 2}O{sub 3}, exhibits the enhanced vortex pinning abilities in all angles between c-axis orientation and the applied magnetic field direction. As well, such a quasi-multilayer film (n = 2) shows the higher lift factor J{sub c}(Θ)/ J{sub c}(90°) and much better vortex pinning properties at high fields and high temperatures, showing promising potential for coated conductor application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Brillouin function characteristics for La-Co substituted barium hexaferrites

La-Co substituted barium hexaferrites with the chemical formula of Ba{sub 1−x}La{sub x}Fe{sub 12−x}Co{sub x}O{sub 19} (x = 0.0, 0.1, 0.3, and 0.5), prepared by a conventional ceramic method, were systematically investigated by Raman spectra, X-ray photoelectron spectroscopy, Rietveld refinement of X-ray diffraction patterns, and vibrating sample magnetometer. The result manifests that all the compounds are crystallized in magnetoplumbite hexagonal structure. Trivalent cobalt ions prevailingly occupy the 2a, 4f{sub 1}, and 12k sites. According to Néel model of collinear-spin ferrimagnetism, the molecular-field coefficients ω{sub bf2}, ω{sub kf1}, ω{sub af1}, ω{sub kf2}, and ω{sub bk} of La-Co substituted barium hexaferrites have been calculated using the nonlinear fitting method, and the magnetic moment of five sublattices (2a, 2b, 4f{sub 1}, 4f{sub 2}, and 12k) versus temperature T has been also investigated. The fitting results are coincided well with the experimental data. Moreover, with the increase of La-Co substitution amount x, the molecular-field coefficients ω{sub bf2} and ω{sub af1} decrease constantly, while the molecular-field coefficients ω{sub kf1}, ω{sub kf2}, and ω{sub bk} show a slight change.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of structural and electrical properties of La{sub 0.7}(Ba{sub 1-x}Ca{sub x}){sub 0.3}MnO{sub 3} compounds by sol-gel method

In this paper, we explored structural and electrical properties of La{sub 0.7}(Ba{sub 1-x}Ca{sub x}){sub 0.3}MnO{sub 3} (x = 0; 0.03; and 0.05) compounds. The general structure of perovskite manganites is AMnO{sub 3} (A= trivalent rare earth with divalent ion-doped). Average A-site cation size, external pressure, and the variance of the cation size σ{sup 2} are one of many factors that affected to magneto-transport properties of manganites as reported by others. In this work we focus only on the electrical properties in La{sub 0.7}Ba{sub 0.3}MnO{sub 3} Ca-doped compound which may influence crystal structure resulting resistivity phenomena under magnetic field influence. All samples were synthesized by sol-gel method from which fine powders were obtained. The X-ray powder diffraction pattern of powder materials shows that all samples are fully crystalline with a rhombohedral structure. Rietveld refinement shows that the presence of calcium has changed some crystal structural parameters such lattice parameter, Mn–O bond length, and Mn–O–Mn angles. The electrical resistivity of all synthesized materials investigated by four point probe method using Cryogenic Magnet in the temperature range of 50-300 K under influence a magnetic field shows resistivity temperature dependent. In fact presence of calcium has reduced the resistivity. It might occure because it has made an enhancement in the mobility of hopping electrons. The magnetic external field causes the resistivity decreased for all samples because host spin align by delocalizing the charge carries so electron itinerant through the lattice suggested by other authors. Both calcium dopant concentration and the applied external magnetic field shows strong correlation in reduction of resistivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic spin and valence states of Fe in CaIrO{sub 3} - type silicate post-perovskite in the earth's lowestmost mantle.

The electronic spin and valence states of Fe in post-perovskite ((Mg{sub 0.75}Fe{sub 0.25})SiO{sub 3}) have been investigated by synchrotron X-ray diffraction, Moessbauer and X-ray emission spectroscopy at 142 GPa and 300 K. Rietveld refinement of the X-ray diffraction patterns revealed that our sample was dominated by CaIrO{sub 3}-type post-perovskite. Combined Moessbauer and X-ray emission results show that Fe in post-perovskite is predominantly Fe{sup 2+} (70%) in the intermediate-spin state with extremely high quadrupole splitting of 3.77(25) mm/s. The remaining 30% Fe can be assigned to two sites. Compared with recent studies, our results indicate that the intermediate-spin Fe{sup 2+} is stabilized in CaIrO{sub 3}-type post-perovskite over a wide range of Fe content, whereas the low-spin Fe{sup 3+} is more dominant in the 2 x 1 kinked post-perovskite structure. The characterization of these structural and compositional effects on the spin and valence states of Fe in post-perovskite can help in understanding the geochemical and geophysical behavior of the core-mantle region.

58 GEOSCIENCES↗

Magnetic properties and local microstructures in Zn-doped YMnO{sub 3}

The hole doping effect on the magnetic properties of multiferroic YMn{sub 1−x}Zn{sub x}O{sub 3} was studied through investigating the local microstructures. Polycrystalline YMn{sub 1−x}Zn{sub x}O{sub 3} samples with x ranging from 0 to 0.22 are synthesized by solid-state reaction method. The x-ray diffraction patterns reveal that YMn{sub 1−x}Zn{sub x}O{sub 3} samples with low Zn{sup 2+} doping concentration (x < 0.1) maintain single phase which show hexagonal structure with space group of P6{sub 3}cm. The temperature dependence of magnetization presents that the magnetic moment at low temperature and the FM transition temperature increase with increasing the doping concentration of Zn{sup 2+}. Meanwhile, ferromagnetism induced by Zn{sup 2+} doping is found to become stronger. EXAFS analysis reveals the in-plane Mn-O{sub P} bond length decreases while the out-of-plane Mn-O{sub A} bond length keeps almost constant. The weak FM order is ascribed to order-to-disorder effect resulting from the diluted exchange interaction among Mn{sup 3+} ions and double-exchange interaction between the mixed valence-state of Mn{sup 3+} and Mn{sup 4+} by hole doping of Zn{sup 2+}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of nitride films of Ti, Cr, and W deposited by reactive magnetron sputtering

Nitride films of Ti, Cr, and W were deposited using reactive magnetron sputtering from metal targets in argon and nitrogen plasma. TiN films with (200) orientation were achieved on silicon (100) at the substrate temperature of 500 and 600 °C. The films were polycrystalline at lower temperature. An amorphous interface layer was observed between the TiN film and Si wafer deposited at 600 °C. TiN film deposited at 600 °C showed the nitrogen to Ti ratio to be near unity, but films deposited at lower temperature were nitrogen deficient. CrN film with (200) orientation and good stoichiometry was achieved at 600 °C on Si(111) wafer but the film deposited at 500 °C showed cubic CrN and hexagonal Cr{sub 2}N phases with smaller grain size and amorphous back ground in the x-ray diffraction pattern. An amorphous interface layer was not observed in the cubic CrN film on Si(111) deposited at 600 °C. Nitride film of tungsten deposited at 600 °C on Si(100) wafer was nitrogen deficient, contained both cubic W{sub 2}N and hexagonal WN phases with smaller grain size. Nitride films of tungsten deposited at 500 °C were nonstoichiometric and contained cubic W{sub 2}N and unreacted W phases. There was no amorphous phase formed along the interface for the tungsten nitride film deposited at 600 °C on the Si wafer. Thermal conductivity and interface thermal conductance of all the nitride films of Ti, Cr, and W were determined by transient thermoreflectance technique. The thermal conductivity of the films as function of deposition temperature, microstructure, nitrogen stoichiometry and amorphous interaction layer at the interface was determined. Tungsten nitride film containing both cubic and hexagonal phases was found to exhibit much higher thermal conductivity and interface thermal conductance. The amorphous interface layer was found to reduce effective thermal conductivity of TiN and CrN films.

36 MATERIALS SCIENCE↗