Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct Drive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Diesel engine catalytic combustor system

A low compression turbocharged diesel engine is provided in which the turbocharger can be operated independently of the engine to power auxiliary equipment. Fuel and air are burned in a catalytic combustor to drive the turbine wheel of turbine section which is initially caused to rotate by starter motor. By opening a flapper value, compressed air from the blower section is directed to catalytic combustor when it is heated and expanded, serving to drive the turbine wheel and also to heat the catalytic element. To start, engine valve is closed, combustion is terminated in catalytic combustor, and the valve is then opened to utilize air from the blower for the air driven motor. When the engine starts, the constituents in its exhaust gas react in the catalytic element and the heat generated provides additional energy for the turbine section.

Ream, L. W.↗

Sliding dynamics of skyrmion molecular crystals

Using both atomistic and particle-based simulations, we investigate the current-driven dynamics of skyrmions on two-dimensional periodic substrates when there are multiple skyrmions per substrate minimum. At zero drive, the system forms pinned skyrmion molecular crystal states consisting of dimers, trimers, or dimer-trimer mixtures that have both positional and orientational order. On a square substrate lattice, the motion above depinning occurs via a running soliton that travels completely transverse to the applied current. This motion is generated by a torque from the Magnus force, which rotates the n-mer states perpendicular to the applied current. At higher drives, the flow becomes disordered while the Hall angle diminishes and gradually approaches the intrinsic value. In some cases, we also find directional locking where the Hall angle becomes locked to certain symmetry directions of the substrate over a range of currents. The transitions into and out of directionally locked states are accompanied by negative differential mobility in which the net velocity decreases as the drive increases. In conclusion, on a triangular substrate, we find no transverse mobility effects, but still observe directionally locked motion.

36 MATERIALS SCIENCE↗

Mechanisms underlying the active self-assembly of microtubule rings and spools

Here, active self-assembly offers a powerful route for the creation of dynamic multiscale structures that are presently inaccessible with standard microfabrication techniques. One such system uses the translation of microtubule filaments by surface-tethered kinesin to actively assemble nanocomposites with bundle, ring, and spool morphologies. Attempts to observe mechanisms involved in this active assembly system have been hampered by experimental difficulties with performing observation during buffer exchange and photodamage from fluorescent excitation. In the present work, we used a custom microfluidic device to remove these limitations and directly study ring/spool formation, including the earliest events (nucleation) that drive subsequent nanocomposite assembly. Three distinct formation events were observed: pinning, collisions, and induced curvature. Of these three, collisions accounted for the majority of event leading to ring/spool formation, while the rate of pinning was shown to be dependent on the amount of photodamage in the system. We further showed that formation mechanism directly affects the diameter and rotation direction of the resultant rings and spools. Overall, the fundamental understanding described in this work provides a foundation by which the properties of motor-driven, actively assembled nanocomposites may be tailored toward specific applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Some observational constraints on the global-scale wind systems of Mars

The present investigation is concerned with the results of a study of wind direction indicators contained in the Viking and Mariner 9 data sets. It is found that wind direction measurements from a variety of indicators, taken over several Mars years at many longitudes, exhibit a high degree of consistency and seasonal reproducibility. It is, therefore, possible to interpret most of the observations in terms of the zonally symmetric circulation of Mars. When combined with models of the atmospheric circulation, observed wind directions can be used to set loose constraints on the polar cap mass fluxes and thermal fields which drive the flows. It is pointed out that polar cap formation seems to control the wind directions at mid and high latitudes in both hemispheres during autumn and early winter.

Kahn, R.↗

Determining the Carrier-Envelope Phase of Intense Few-Cycle Laser Pulses

The electromagnetic radiation emitted by an ultrarelativistic accelerated electron is extremely sensitive to the precise shape of the field driving the electron. We show that the angular distribution of the photons emitted by an electron via multiphoton Compton scattering off an intense (I>10{sup 20} W/cm{sup 2}), few-cycle laser pulse provides a direct way of determining the carrier-envelope phase of the driving laser field. Our calculations take into account exactly the laser field, include relativistic and quantum effects and are in principle applicable to presently available and future foreseen ultrastrong laser facilities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigation of deformation mechanisms in an advanced FeCrAl alloy using in-situ SEM-EBSD testing

The deformation mechanisms associated with uniaxial tensile testing are observed by conducting tensile experiments of an FeCrAl alloy using scanning electron microscopy (SEM) coupled with electron backscattered diffraction (EBSD). Prior to the deformation, investigated alloy was consisting grain and precipitate size of ~63.0 μm and ~6.7 μm, respectively. The recorded SEM micrographs and EBSD data at increasing levels of strains revealed the complex phenomena of slip bands’ formation in the presence of surface grain morphology evolution and their (001), (110) and (111) crystallographic planes distortions. The grains with orientation (110)||tensile direction (TD) shows higher shape change; however, (001)||TD and (111)||TD oriented grains show higher lattice gradient formation. Extracted information from the EBSD indicates that the crystallographic rotations drive towards specific, fiber-like texture in relation to the loading direction. Postmortem analysis of the recorded microstructure during the tensile deformation explains the phenomena of crack formation in the hard-intermetallic particles before the ultimate tensile strength (UTS). However, after the UTS, pores were identified in the neck that resulted from extensive plastic deformation. In-depth analysis was carried out to identify the cause of cracks and pores formation phenomena during the tensile test.

36 MATERIALS SCIENCE↗

Computerized Design of Low-noise Face-milled Spiral Bevel Gears

An advanced design methodology is proposed for the face-milled spiral bevel gears with modified tooth surface geometry that provides a reduced level of noise and has a stabilized bearing contact. The approach is based on the local synthesis of the gear drive that provides the 'best' machine-tool settings. The theoretical aspects of the local synthesis approach are based on the application of a predesigned parabolic function for absorption of undesirable transmission errors caused by misalignment and the direct relations between principal curvatures and directions for mating surfaces. The meshing and contact of the gear drive is synthesized and analyzed by a computer program. The generation of gears with the proposed geometry design can be accomplished by application of existing equipment. A numerical example that illustrates the proposed theory is presented.

Litvin, Faydor L.↗

Energy Considerations of Hypothetical Space Drives

The energy requirements of hypothetical, propellant-less space drives are compared to rockets. This serves to provide introductory estimates for potential benefits and to suggest analytical approaches for further study. A "space drive" is defined as an idealized form of propulsion that converts stored potential energy directly into kinetic energy using only the interactions between the spacecraft and its surrounding space. For Earth-to-orbit, the space drive uses 3.7 times less energy. For deep space travel, energy is proportional to the square of delta-v, whereas rocket energy scales exponentially. This has the effect of rendering a space drive 150-orders-of-magnitude better than a 17,000-s Specific Impulse rocket for sending a modest 5000 kg probe to traverse 5 ly in 50 years. Indefinite levitation, which is impossible for a rocket, could conceivably require 62 MJ/kg for a space drive. Assumption sensitivities and further analysis options are offered to guide further inquires.

Millis, Marc G.↗

Mars Relay Spacecraft: A Low-Cost Approach

The next phase of Mars exploration will utilize numerous globally distributed small low-cost devices including landers penetrators microrovers and balloons. Direct-to-Earth communications links if required for these landers will drive the lander design for two reasons: a) mass and complexity needed for a steerable high-gain antenna and b) power requirements for a high-power amplifier (i.e. solar panel and battery mass). Total mass of the direct link hardware for several recent small-lander designs exceeded the mass of the scientific payload. Alternatively if communications are via a Mars-orbiting relay spacecraft resource requirements for the local UHF communication link are comparatively trivial: a simple whip antenna and less than 1 watt power. Clearly using a Mars relay spacecraft (MRS) is the preferred option if the MRS mission can be accomplished in an affordable and robust way. Our paper describes a point design for such a mission launched in the s001 or 2003 opportunity.

Mars Relay Spacecraft↗

Proton and Ion Beams Generated with Picosecond CO{sub 2} Laser Pulses

1-TW, 6-ps, circularly polarized CO{sub 2} laser pulses focused onto thin Al foils are used to drive ion acceleration. The spectra of ions and protons generated in the direction normal to the rear surface, detected with a compact magnet spectrometer with CR39, reveals a broad proton high-energy peak at {approx}1 MeV. This observation conforms to the theoretical predictions that circularly polarized laser pulses are less efficient than linearly polarized pulses in driving ion acceleration via the Target Normal Sheath Acceleration (TNSA) mechanism. Instead, there is evidence that the circularly polarized laser may provide direct ponderomotive acceleration of ions and protons. We report also the first application of the BNL proton source in nano-science. Irradiation of graphite and graphene films produced local defects and membranes for variety of applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bi-directional streaming of solar wind electrons greater than 80 eV - ISEE evidence for a closed-field structure within the driver gas of an interplanetary shock

In near time coincidence with the arrival of helium enriched plasma driving the shock wave disturbance of November 12-13, 1978, strong bi-directional streaming of solar wind electrons greater than about 80 eV was observed with Los Alamos instrumentation on ISEE 3. The streaming persisted for many hours simultaneously parallel and anti-parallel to the interplanetary magnetic field which was directed roughly perpendicular to the sun-satellite line. This example of bidirectional streaming cannot be explained by field line connection to the earth's bow shock or the outward propagating interplanetary shock which passed ISEE 3 approximately 16 hours earlier. The event is explained if the local interplanetary field was a part of a magnetic bottle rooted at the sun or a disconnected loop propagating outward.

Bame, S. J.↗

Plasmon-Assisted Direct Interfacial Charge Transfer Enables Molecular Photodissociation on Metal Surfaces

Plasmonic photocatalysis is promising for driving reactions out of equilibrium, leading to enhanced rates and selectivity, but the energy and charge transfer mechanism at the interface remains to be explored. Here, we revisit visible-light plasmon-assisted photodissociation of dimethyl disulfide molecules (S–S bond cleavage) over single-crystalline silver and copper surfaces, using density functional theory calculations and the delta self-consistent field method. We investigate different excitation mechanisms and show that the direct intramolecular excitations, as suggested earlier to explain the experimental findings, cannot address the observed catalytic bond activation. Instead, the calculated excitations mediated by the metal Fermi level agree well with the threshold energy and maximum-yield energy in experiments and suggest that the reaction follows a direct interfacial charge transfer mechanism. Furthermore, we show that the excitation energy and the charge transfer can be modulated by introducing excess charges in the systems. Here, this study thus provides a fundamental understanding of interfacial charge transfer for driving plasmonic photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Data Testing Of Pu{sup 239} CIELO Evaluation With NDaST

Within the Collaborative International Evaluated Library Organisation (CIELO) project a coordinated effort is being made amongst the different nuclear data evaluation projects, ENDF, JEFF, JENDL etc. to improve the cross sections of six of the most important isotopes, Pu{sup 239}, U{sup 235}, U{sup 238}, Fe{sup 56}, O{sup 16} and H{sup 1}. Recently developed, the Nuclear Data and Sensitivity Tool (NDaST) is an online tool (http://www.oecd-nea.org/ndast/) that allows nuclear data evaluators to get rapid feedback about the consequences of changes to nuclear data on integral experiment benchmarks that exist within the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and International Reactor Physics Evaluation (IRPhE) Project handbooks. NDaST links the thousands of nuclear data sensitivity profiles in the Database for ICSBEP (DICE) and the IRPhE Database and Analysis Tool (IDAT), with the nuclear data viewing tool JANIS. NDaST can be used to provide timely feedback to CIELO participants. Normally an evaluator changes the ENDF/B files based on differential data, and subsequently hands the new evaluation to testers who give feedback on the performance of the new evaluation in terms of accurately predicting the integral benchmark results. This process is often slow. With accurate sensitivity coefficients it is feasible to predict the results of changes to differential data without performing the direct substitution, by simply multiplying the change in cross section with the sensitivity. Furthermore, when multiple aspects of the file are changed simultaneously, the impact of each individual change can be muddled in the substitution testing. NDaST when used in conjunction with direct perturbation testing can help provide feedback as to which cross section changes are driving changes in the benchmarks. In this paper we focus on Pu{sup 239}, and comparing the NDaST predictions of CIELO files to direct substitution. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Electrohydrodynamically formed structures of carbonaceous material

A method for the electrohydrodynamic deposition of carbonaceous materials utilizing an electrohydrodynamic cell comprising two electrodes comprised of a conductive material, by first combining a solid phase comprising a carbonaceous material and a suspension medium, placing the suspension between the electrodes, applying an electric field in a first direction, varying the intensity of the electric field sufficiently to drive lateral movement, increasing the electrical field to stop the lateral transport and fix the layers in place, then removing the applied field and removing the electrodes. Among the many different possibilities contemplated, the method may advantageously utilize: varying the spacing between the electrodes; removing the buildup from one or both electrodes; placing the electrodes into different suspensions; adjusting the concentration, pH, or temperature of the suspension(s); and varying the direction, intensity or duration of the electric fields.

Aksay, Ilhan A.↗

Novel Synthesis and Atomic Level Characterization of PtSn/C Nanocatalysts for Direct Ethanol Fuel Cell Applications

The depleting amount of fossil fuels and the recent concerns about global warming have been the driving force for developing alternative and renewable energy sources such as biomass-derived liquid fuels. For applications in transportation or portable devices, direct ethanol fuel cell (DEFC) has recently attracted attention because of its non-toxicity, higher power density and renewability. The PtSn/C nanocatalyst is now considered as the most effective catalyst for the anode performance of DEFC [1]. The optimum Pt/Sn ratio and their degree of alloying, however, still remain controversial; furthermore, the catalyst preparation procedure can significantly affect the catalyst's nature and performance [2-3]. To better control the composition profile as well as the size distribution of PtSn nanoparticles, we recently focused on developing precisely defined molecular complexes as precursor materials. We expect that uniform dispersion of such molecular complexes onto catalyst supports, such as carbon black powders, and the subsequent controlled reduction processes may provide a novel route to fabricate PtSn nanoparticle catalysts with better alloying, desirable stoichiometry, a narrow particle size distribution and a better spatial distribution.

direct ethanol↗

Taxonomic and nutrient controls on phytoplankton iron quotas in the ocean

Abstract Phytoplankton iron contents (i.e., quotas) directly link biogeochemical cycles of iron and carbon and drive patterns of nutrient limitation, recycling, and export. Ocean biogeochemical models typically assume that iron quotas are either static or controlled by dissolved iron availability. We measured iron quotas in phytoplankton communities across nutrient gradients in the Pacific Ocean and found that quotas diverged significantly in taxon‐specific ways from laboratory‐derived predictions. Iron quotas varied 40‐fold across nutrient gradients, and nitrogen‐limitation allowed diatoms to accumulate fivefold more iron than co‐occurring flagellates even under low iron availability. Modeling indicates such “luxury” uptake is common in large regions of the low‐iron Pacific Ocean. Among diatoms, both pennate and centric genera accumulated luxury iron, but the cosmopolitan pennate genus Pseudo‐nitzschia maintained iron quotas 10‐fold higher than co‐occurring centric diatoms, likely due to enhanced iron storage. Biogeochemical models should account for taxonomic and macronutrient controls on phytoplankton iron quotas.

54 ENVIRONMENTAL SCIENCES↗

Time-to-Pinch Investigation of 5 kJ Mather-Type Plasma Focus Device

The Egyptian Atomic Energy Authority-Plasma focus (EAEA-PF2) has been upgraded to a 5 kJ plasma focus device. Its characteristics have been investigated at various pressures and different voltages in a 5 kJ Mather-type plasma focus device for Ar gas. Its time-to-pinch has been measured, simulated and analyzed at different operating conditions. It is observed from the results that, the time-to-pinch decreased when either the charging voltage increased or the gas pressure decreased. In addition, the time-to-pinch is estimated theoretically using Lee model RADPF5.15. A comparison between the experimental and theoretical time-to-pinch is discussed. Also, the drive factor of plasma focus is analyzed at different pressures and charging voltages. It is noticed that, the mass and current factors are affected by changing the pressure and voltage. Finally, it is observed that, the drive factor is proportional inversely to the pressure and directly to the charging voltage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗