Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Soil moisture estimation using tomographic ground penetrating radar in a MCMC–Bayesian framework

In this paper, we focus on a hydrogeological inverse problem specifically targeting monitoring soil moisture variations using tomographic ground penetrating radar (GPR) travel time data. Technical challenges exist in the inversion of GPR tomographic data for handling non-uniqueness, nonlinearity and high-dimensionality of unknowns. We have developed a new method for estimating soil moisture fields from crosshole GPR data. It uses a pilot-point method to provide a low-dimensional representation of the relative dielectric permittivity field of the soil, which is the primary object of inference: the field can be converted to soil moisture using a petrophysical model. We integrate a multi-chain Markov chain Monte Carlo (MCMC)–Bayesian inversion framework with the pilot point concept, a curved-ray GPR travel time model, and a sequential Gaussian simulation algorithm, for estimating the dielectric permittivity at pilot point locations distributed within the tomogram, as well as the corresponding geostatistical parameters (i.e., spatial correlation range). We infer the dielectric permittivity as a probability density function, thus capturing the uncertainty in the inference. The multi-chain MCMC enables addressing high-dimensional inverse problems as required in the inversion setup. The method is scalable in terms of number of chains and processors, and is useful for computationally demanding Bayesian model calibration in scientific and engineering problems. The proposed inversion approach can successfully approximate the posterior density distributions of the pilot points, and capture the true values. The computational efficiency, accuracy, and convergence behaviors of the inversion approach were also systematically evaluated, by comparing the inversion results obtained with different levels of noises in the observations, increased observational data, as well as increased number of pilot points.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Localization of a radioactive source in an urban environment using Bayesian Metropolis methods [Bayesian Metropolis methods for source localization in an urban environment]

Here, we present a method for localizing an unknown source of radiation in an urban environment using a distributed detector network. This method employs statistical parameter estimation techniques, relying on an approximation for the response of a detector to the source based on a simplified model of the underlying transport phenomena, combined with a Metropolis-type sampler that is modified to propagate the effect of fixed epistemic uncertainties in the material macroscopic cross sections of objects in the scene. We apply this technique to data collected during a measurement campaign conducted in a realistic analog for an urban scene using a network of six mobile detectors. Our initial results are able to localize the source to within approximately 8 m over a scene of size 300 m 200 m in two independent trials with 30 min count times, including a characterization of the uncertainty associated with the poorly known macroscopic cross sections of objects in the scene. In these measurements, the nearest detectors were between 20 m to 30 m from the source, and recorded count rates between approximately 3 and 13 times background. A few detectors had line-of-sight to the source, while the majority were obscured by objects present in the scene. After extending our model to account for the orientation of the detectors and correcting for anomalies in the measurement data we were able to further improve the localization accuracy to approximately 2 m in both trials.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Uncertainty Analysis of Simulations of the Turn-of-the-Century Drought in the Western United States

Here, we perform the first uncertainty quantification analysis of the turn-of-the-century drought in the western United States using a large perturbed-parameter ensemble of the Community Atmosphere Model version 4.0 (CAM4). We develop several metrics to characterize the aridity bias, spatial extent, and tropical forcing of the drought and use statistical models to ascertain that the modeled drought was mainly sensitive to CAM4 parameters related to deep convection and clouds. Deep convection parameters account for over half the variance across the drought metrics. We employ observed estimates of these drought metrics to infer probability distributions of the model parameters that lead to a better agreement with observations, thereby providing guidance on how to improve the simulation of drought in CAM4. We find that in some cases, the suggested parameter values that improve the simulation of one drought characteristic would degrade the simulation of another, suggesting that there is a complex relationship between the model parameters and drought in the western United States. We also demonstrate reductions in the uncertainty of the drought metrics of up to 30% by constraining with observations of all metrics. Additionally, we demonstrate for the first time that improvements to the simulation of the spatial extent of the turn-of-the-century drought also lead to improvements in the spatial extent of the Australian Millennium drought, suggesting that physics of drought as encoded by the model parameters may be generalizable.

58 GEOSCIENCES↗
DOE OSTI2020

Global evidence for the acclimation of ecosystem photosynthesis to light

Photosynthesis responds quickly to changes in light, increasing with incoming photosynthetic photon flux density (PPFD) until the leaves become light saturated. This instantaneous response to PPFD, which is widely studied and incorporated into models of photosynthesis, is overlaid on non-instantaneous photosynthetic changes resulting from the acclimation of plants to average PPFD over intermediate timescales of a week to months ($\overline{PPFD}$). Such photosynthetic light acclimation is not typically incorporated into models, due to the lack of observational constraints. In this work, we use eddy covariance observations from globally distributed and automated sensor networks, along with photosynthesis estimates from nine terrestrial biosphere models (TBMs), to quantify and assess photosynthetic acclimation to light in natural environments. We also use recent theoretical developments to incorporate light acclimation in a TBM. Our results show widespread light acclimation of ecosystem photosynthesis. On average, a 1 μmol m -2 s -1 increase in $\overline{PPFD}_{10}$ (ten-day average PPFD) leads to a 0.031 ± 0.013 μmol C m -2 s -1 increase in the maximum photosynthetic assimilation rate (A max ), with croplands having stronger acclimation rates than grasslands and forests. Our analysis shows that the TBMs examined either neglect or substantially underestimate light acclimation. By updating a TBM to include photosynthetic acclimation, successfully reproducing the $\overline{PPFD}_{10}$-A max relationship, we provide a robust method for the incorporation of photosynthetic light acclimation in future models.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Modeling of the spray-induced wall stress acting on the ignition assistance device

This research introduces a novel wall-stress model called the Spray-Induced Wall Stress (SIWS) model, which considers the effects of spray-wall impingement and the resulting formation of wall stress within the Lagrangian spray modeling framework. The primary objective of this paper is to provide a mathematical description of the fundamental physics underlying the model. Subsequently, the proposed model is validated using existing experimental data. Here, the remainder of the study focuses on the practical application of the model to an ignition assistance device. Specifically, this device is installed in a compression ignition engine and designed to enhance ignition in aviation-fueled high-altitude aircraft propulsion systems. The research sheds light on the mechanical impulse caused by the high-speed impact of the spray jet, leading to the accumulation of mechanical stress on the rigid body of the ignition assistance device. Previous studies on fluid-structure interaction have only considered the interaction between the gas phase and the solid wall. However, the SIWS model incorporates the additional impact of the impinging liquid spray jet. Consequently, the simulated stress distribution on the ignition assistance device can be estimated by considering both the gas-phase-induced term and the spray-induced term simultaneously.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Rates and delay times of type Ia supernovae in the Dark Energy Survey

We use a sample of 809 photometrically classified Type Ia supernovae (SNe Ia) discovered by the Dark Energy Survey (DES) along with 40 415 field galaxies to calculate the rate of SNe Ia per galaxy in the redshift range 0.2 < z < 0.6. We recover the known correlation between SN Ia rate and galaxy stellar mass across a broad range of scales 8.5 ≤ log (M*/M ⊙ ) ≤ 11.25. We find that the SN Ia rate increases with stellar mass as a power law with index 0.63 ± 0.02, which is consistent with the previous work. We use an empirical model of stellar mass assembly to estimate the average star formation histories (SFHs) of galaxies across the stellar mass range of our measurement. Combining the modelled SFHs with the SN Ia rates to estimate constraints on the SN Ia delay time distribution (DTD), we find that the data are fit well by a power-law DTD with slope index β = –1.13 ± 0.05 and normalization A = 2.11 ± 0.05 × 10 –13 SNe M ⊙ –1 yr –1 , which corresponds to an overall SN Ia production efficiency N Ia /M * = 0.9 $^{+4.0}_{–0.7}$ × 10 –3 SNe M$^{–1}_{⊙}$. Upon splitting the SN sample by properties of the light curves, we find a strong dependence on DTD slope with the SN decline rate, with slower-declining SNe exhibiting a steeper DTD slope. We interpret this as a result of a relationship between intrinsic luminosity and progenitor age, and explore the implications of the result in the context of SN Ia progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Momentum power spectrum of SDSS galaxies by massE cosmic ruler: 2.1×improvement in measure of growth rate

ABSTRACT Peculiar motion of galaxies probes the structure growth in the universe. In this study, we employ the galaxy stellar mass-binding energy (massE) relation with only two nuisance parameters to build the largest peculiar-velocity (PV) catalogue to date, consisting of 229 890 ellipticals from the main galaxy sample (MGS) of the Sloan Digital Sky Survey (SDSS). We quantify the distribution of the massE-based distances in individual narrow redshift bins (dz = 0.005), and then estimate the PV of each galaxy based on its offset from the Gaussian mean of the distribution. As demonstrated with the Uchuu-SDSS mock data, the derived PV and momentum power spectra are insensitive to accurate calibration of the massE relation itself, enabling measurements out to a redshift of 0.2, well beyond the current limit of z = 0.1 using other galaxy scaling laws. We then measure the momentum power spectrum and demonstrate that it remains almost unchanged if varying significantly the redshift bin size within which the distance is measured, as well as the intercept and slope of the massE relation, respectively. By fitting the spectra using the perturbation theory model with four free parameters, fσ8 is constrained to fσ8 = 0.459$^{+0.068}_{-0.069}$ over Δz = 0.02–0.2, 0.416$^{+0.074}_{-0.076}$ over Δz = 0.02–0.1, and 0.526$^{+0.133}_{-0.148}$ over Δz = 0.1–0.2. The error of fσ8 is 2.1 times smaller than that by the redshift space distortion (RSD) of the same sample. A Fisher matrix forecast illustrates that the constraint on fσ8 from the massE-based PV can potentially exceed that from the stage-IV RSD in late universe (z<0.5).

Shi, Yong (ORCID:0000000286146275)↗
DOE OSTI2025

Search for electroweak-scale dijet resonances using trigger-level analysis with the ATLAS detector in 132 fb −1 of 𝑝⁢𝑝 collisions at $\sqrt{𝑠}$ = 13 TeV

This article reports on a search for dijet resonances using 132 fb −1 of 𝑝⁢𝑝 collision data recorded at $\sqrt{𝑠}$ = 13 TeV by the ATLAS detector at the Large Hadron Collider. The search is performed solely on jets reconstructed within the ATLAS trigger to overcome bandwidth limitations imposed on conventional single-jet triggers, which would otherwise reject data from decays of sub-TeV dijet resonances. Collision events with two jets satisfying transverse momentum thresholds of 𝑝 T ≥ 85 GeV and jet rapidity separation of |𝑦*| <0.6 are analysed for dijet resonances with invariant masses from 375 to 1800 GeV. A data-driven background estimate is used to model the dijet mass distribution from multijet processes. No significant excess above the expected background is observed. Upper limits are set at 95% confidence level on coupling values for a benchmark leptophobic axial-vector 𝑍′ model and on the production cross section for a new resonance contributing a Gaussian-distributed line-shape to the dijet mass distribution.

hadron colliders↗
DOE OSTI2024

Data-driven reevaluation of f t values in superallowed β decays

We present a comprehensive reevaluation of the ft values in superallowed nuclear β decays crucial for the precise determination of V ud and low-energy tests of the electroweak standard model. It consists of the first, fully data-driven analysis of the nuclear β decay form factor, that utilizes isospin relations to connect the nuclear charged weak distribution to the measurable charge distributions. This prescription supersedes previous shell-model estimations, and allows for a rigorous quantification of theory uncertainties in f which is absent in the existing literature. Furthermore, our new evaluation shows an overall downward shift of the central values of f at the level of 0.01%.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Electron-Phonon Systems on a Universal Quantum Computer

We present an algorithm that extends existing quantum algorithms for simulating fermion systems in quantum chemistry and condensed matter physics to include bosons in general and phonons in particular. We introduce a qubit representation for the low-energy subspace of phonons which allows an efficient simulation of the evolution operator of the electron-phonon systems. As a consequence of the Nyquist-Shannon sampling theorem, the phonons are represented with exponential accuracy on a discretized Hilbert space with a size that increases linearly with the cutoff of the maximum phonon number. The additional number of qubits required by the presence of phonons scales linearly with the size of the system. The additional circuit depth is constant for systems with finite-range electron-phonon and phonon-phonon interactions and linear for long-range electron-phonon interactions. Our algorithm for a Holstein polaron problem was implemented on an Atos quantum learning machine quantum simulator employing the quantum phase estimation method. The energy and the phonon number distribution of the polaron state agree with exact diagonalization results for weak, intermediate, and strong electron-phonon coupling regimes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

scraps: An open-source Python-based analysis package for analyzing and plotting superconducting resonator data

We present "scraps" (SuperConducting Analysis and Plotting Software), a Python package designed to aid in the analysis and visualization of large amounts of superconducting resonator data, specifically complex transmission as a function of frequency, acquired at many different temperatures and driving powers. The package includes a least-squares fitting engine as well as a Monte-Carlo Markov Chain sampler for sampling the posterior distribution given priors, marginalizing over nuisance parameters, and estimating covariances. A set of plotting tools for generating publication-quality figures is also provided in the package. Lastly, we discuss the functionality of the software and provide some examples of its utility on data collected from a niobium-nitride coplanar waveguide resonator fabricated at Argonne National Laboratory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Joint Chance Constraints in AC Optimal Power Flow: Improving Bounds through Learning

This paper considers distribution systems with a high penetration of distributed, renewable generation and addresses the problem of incorporating the associated uncertainty into the optimal operation of these networks. Joint chance constraints, which satisfy multiple constraints simultaneously with a prescribed probability, are one way to incorporate uncertainty across sets of constraints, leading to a chance-constrained optimal power flow problem. Departing from the computationally-heavy scenario-based approaches or approximations that transform the joint constraint into conservative deterministic constraints, this paper develops a scalable, data-driven approach which learns operational trends in a power network, eliminates zero-probability events (e.g., inactive constraints), and accurately and efficiently approximates bounds on the joint chance constraint iteratively. In particular, the proposed framework improves upon the classic methods based on the union bound (or Boole's inequality) by generating a much less conservative set of single chance constraints that also guarantees the satisfaction of the original joint constraint. The proposed framework is evaluated numerically using the IEEE 37-node test feeder, focusing on the problem of voltage regulation in distribution grids.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2016

Probabilistic distributions of pinhole defects in atomic layer deposited films on polymeric substrates

Pinhole defects in atomic layer deposition (ALD) coatings were measured in an area of 30 cm{sup 2} in an ALD reactor, and these defects were represented by a probabilistic cluster model instead of a single defect density value with number of defects over area. With the probabilistic cluster model, the pinhole defects were simulated over a manufacturing scale surface area of ∼1 m{sup 2}. Large-area pinhole defect simulations were used to develop an improved and enhanced design method for ALD-based devices. A flexible thermal ground plane (FTGP) device requiring ALD hermetic coatings was used as an example. Using a single defect density value, it was determined that for an application with operation temperatures higher than 60 °C, the FTGP device would not be possible. The new probabilistic cluster model shows that up to 40.3% of the FTGP would be acceptable. With this new approach the manufacturing yield of ALD-enabled or other thin film based devices with different design configurations can be determined. It is important to guide process optimization and control and design for manufacturability.

42 ENGINEERING↗
DOE OSTI2016

Determination of the direction to a source of antineutrinos via inverse beta decay in Double Chooz

To determine the direction to a source of neutrinos (and antineutrinos) is an important problem for the physics of supernovae and of the Earth. The direction to a source of antineutrinos can be estimated through the reaction of inverse beta decay. We show that the reactor neutrino experiment Double Chooz has unique capabilities to study antineutrino signal from point-like sources. Contemporary experimental data on antineutrino directionality is given. A rigorous mathematical approach for neutrino direction studies has been developed. Exact expressions for the precision of the simple mean estimator of neutrinos’ direction for normal and exponential distributions for a finite sample and for the limiting case of many events have been obtained.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Constraining the $\overline{K}$N coupled channel dynamics using femtoscopic correlations at the LHC

The interaction of K – with protons is characterised by the presence of several coupled channels, systems like $\overline{K}$ 0 n and πΣ with a similar mass and the same quantum numbers as the K – p state. The strengths of these couplings to the K – p system are of crucial importance for the understanding of the nature of the Λ(1405) resonance and of the attractive K – p strong interaction. In this article, we present measurements of the K – p correlation functions in relative momentum space obtained in pp collisions at $\sqrt{s}$=13 Te, in p–Pb collisions at $\sqrt{s_{NN}}$= 5.02 Te, and (semi)peripheral Pb–Pb collisions at $\sqrt{s_{NN}}$= 5.02 Te. The emitting source size, composed of a core radius anchored to the K + p correlation and of a resonance halo specific to each particle pair, varies between 1 and 2 fm in these collision systems. The strength and the effects of the $\overline{K}$ 0 n and πΣ inelastic channels on the measured K – p correlation function are investigated in the different colliding systems by comparing the data with state-of-the-art models of chiral potentials. A novel approach to determine the conversion weights ω, necessary to quantify the amount of produced inelastic channels in the correlation function, is presented. In this method, particle yields are estimated from thermal model predictions, and their kinematic distribution from blast-wave fits to measured data. The comparison of chiral potentials to the measured K – p interaction indicates that, while the πΣ –K – p dynamics is well reproduced by the model, the coupling to the $\overline{K}$ 0 n channel in the model is currently underestimated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Peer-to-Peer Energy Management System for Distributed Microgrid Coordination [SWR-21-92]

Resiliency is one of the key challenges in today's power system. Natural disasters and cyber-attacks both can limit communications between microgrids and the central management system. Thus, having a Distributed Microgrid Coordination (DMC) algorithm can improve the system resiliency, which enables the microgrids to operate without communication with the central management system. Peer-to-Peer Energy Management System for Distributed Microgrid Coordination adopts a primal-dual approach, where each microgrid controller keeps a local estimate of the dual variables. The estimate is updated with local measurements and peer-to-peer communication, leading to a fully distributed algorithm. While the DMC is developed for microgrid coordination, it can be used for general distributed control purpose.

Li, Yashen↗