Search NASA⌕ Search

SEARCH · Search NASA

Results for “High current density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Resonant tunneling diodes as sources for millimeter and submillimeter wavelengths

High-quality Resonant Tunneling Diodes have been fabricated and tested as sources for millimeter and submillimeter wavelengths. The devices have shown excellent I-V characteristics with peak-to-valley current ratios as high as 6:1 and current densities in the range of 50-150 kA/cm(exp 2) at 300 K. Used as local oscillators, the diodes are capable of state of the art output power delivered by AlGaAs-based tunneling devices. As harmonic multipliers, a frequency of 320 GHz has been achieved by quintupling the fundamental oscillation of a klystron source.

Vanbesien, O.↗

Fabrication of Microstripline Wiring for Large Format Transition Edge Sensor Arrays

We have developed a process to integrate microstripline wiring with transition edge sensors (TES). The process includes additional layers for metal-etch stop and dielectric adhesion to enable recovery of parameters achieved in non-microstrip pixel designs. We report on device parameters in close-packed TES arrays achieved with the microstrip process including R(sub n), G, and T(sub c) uniformity. Further, we investigate limits of this method of producing high-density, microstrip wiring including critical current to determine the ultimate scalability of TES arrays with two layers of wiring.

Chervenak, James A.↗

Electron Beam Emission from a Diamond-Amplifier Cathode

The diamond amplifier (DA) is a new device for generating high-current, high-brightness electron beams. Our transmission-mode tests show that, with single-crystal, high-purity diamonds, the peak current density is greater than 400 mA/mm{sup 2}, while its average density can be more than 100 mA/mm{sup 2}. The gain of the primary electrons easily exceeds 200, and is independent of their density within the practical range of DA applications. We observed the electron emission. The maximum emission gain measured was 40, and the bunch charge was 50 pC/0.5 mm{sup 2}. There was a 35% probability of the emission of an electron from the hydrogenated surface in our tests. We identified a mechanism of slow charging of the diamond due to thermal ionization of surface states that cancels the applied field within it. We also demonstrated that a hydrogenated diamond is extremely robust.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrochemical materials including solid and liquid phases

Electrochemical devices, and associated materials and methods, are generally described. In some embodiments, an electrochemical device comprises an electroactive material. The electroactive material may comprise an alloy having a solid phase and a liquid phase that co-exist with each other. As a result, such a composite electrode may have, in some cases, the mechanical softness to permit both high energy densities and an improved current density as compared to, for example, a substantially pure metal electrode.

Chiang, Yet-Ming↗

Interactions between X-ray induced transient defects and pre-existing damage precursors in DKDP crystals

Large-aperture laser systems, currently designed to achieve high energy densities at the target location (exceeding {approx} 10{sup 11} J/m{sup 3}), will enable studies of the physics of matter and radiation under extreme conditions. As a result, their optical components, such as the frequency conversion crystals (KDP/DKDP), may be exposed to X-rays and other ionizing radiation. This in turn may lead to a change in the damage performance of these materials as they may be affected by radiation-induced effects by either forming new damage initiation centers or interacting with the pre-existing damage initiating defects (so-called damage precursors). We present an experimental study on the laser-induced bulk damage performance at 355-nm of DKDP crystals following X-ray irradiation at room temperature. Results indicate that the damage performance of the material is affected by exposure to X-rays. We attribute this behavior to a change in the physical properties of the precursors which, in turn, affect their individual damage threshold.

42 ENGINEERING↗

LOCA and LOFA Safety Margin Analysis for U-10Mo Monolithic LEU Fuel Conversion of the MURR{sup R} Reactor

The University of Missouri Research Reactor (MURR{sup R}) is a multi-disciplinary research and education facility providing a broad range of analytical and irradiation services to the research community and the commercial sector. The source of neutrons for the experimental facilities of MURR{sup R} is a compact 10 MW core fueled with highly-enriched uranium (HEU) fuel. The continued presence of HEU fuel in civilian installations such as research and test reactors poses a threat to national and international security. Therefore, most research and test reactors, both domestic and international, have started a program of conversion to the use of low-enriched uranium (LEU) fuel. MURR{sup R} is one of five U.S. high-performance research and test reactors (USHPRRs) that are actively collaborating with the U.S. National Nuclear Security Agency (NNSA) Office of Material Management and Minimization (M3) to develop a suitable LEU fuel replacement for the currently required HEU fuel. A new type of high-density LEU fuel based on an alloy of uranium and molybdenum is currently undergoing qualification testing, and is expected to allow the conversion of all USHPRRs. As a part of the LEU conversion of MURR{sup R}, an analysis of core behavior under a set of accident conditions for a core fueled with an LEU monolithic alloy of uranium and 10 wt% molybdenum (U-10Mo) has been conducted. This paper presents the newest results for the loss-of-coolant accidents (LOCAs) and loss-of-flow accidents (LOFAs). Other classes of accidents have also been investigated but were not included here. Namely, reactivity insertion accidents (RIAs), fuel failure during operations accidents (FFAs), and fuel handling accidents (FHAs)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Ion beam enhancement in magnetically insulated ion diodes for high-intensity pulsed ion beam generation in non-relativistic mode

High-intensity pulsed ion beam (HIPIB) with ion current density above Child-Langmuir limit is achieved by extracting ion beam from anode plasma of ion diodes with suppressing electron flow under magnetic field insulation. It was theoretically estimated that with increasing the magnetic field, a maximal value of ion current density may reach nearly 3 times that of Child-Langmuir limit in a non-relativistic mode and close to 6 times in a highly relativistic mode. In this study, the behavior of ion beam enhancement by magnetic insulation is systematically investigated in three types of magnetically insulated ion diodes (MIDs) with passive anode, taking into account the anode plasma generation process on the anode surface. A maximal enhancement factor higher than 6 over the Child-Langmuir limit can be obtained in the non-relativistic mode with accelerating voltage of 200–300 kV. The MIDs differ in two anode plasma formation mechanisms, i.e., surface flashover of a dielectric coating on the anode and explosive emission of electrons from the anode, as well as in two insulation modes of external-magnetic field and self-magnetic field with either non-closed or closed drift of electrons in the anode-cathode (A-K) gap, respectively. Combined with ion current density measurement, energy density characterization is employed to resolve the spatial distribution of energy density before focusing for exploring the ion beam generation process. Consistent results are obtained on three types of MIDs concerning control of neutralizing electron flows for the space charge of ions where the high ion beam enhancement is determined by effective electron neutralization in the A-K gap, while the HIPIB composition of different ion species downstream from the diode may be considerably affected by the ion beam neutralization during propagation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nano-enhanced solid-state hydrogen storage: Balancing discovery and pragmatism for future energy solutions

Nanomaterials have revolutionized the battery industry by enhancing energy storage capacities and charging speeds, and their application in hydrogen (H 2 ) storage likewise holds strong potential, though with distinct challenges and mechanisms. H 2 is a crucial future zero-carbon energy vector given its high gravimetric energy density, which far exceeds that of liquid hydrocarbons. However, its low volumetric energy density in gaseous form currently requires storage under high pressure or at low temperature. This review critically examines the current and prospective landscapes of solid-state H 2 storage technologies, with a focus on pragmatic integration of advanced materials such as metal-organic frameworks (MOFs), magnesium-based hybrids, and novel sorbents into future energy networks. These materials, enhanced by nanotechnology, could significantly improve the efficiency and capacity of H 2 storage systems by optimizing H 2 adsorption at the nanoscale and improving the kinetics of H 2 uptake and release. We discuss various H 2 storage mechanisms—physisorption, chemisorption, and the Kubas interaction—analyzing their impact on the energy efficiency and scalability of storage solutions. The review also addresses the potential of “smart MOFs”, single-atom catalyst-doped metal hydrides, MXenes and entropy-driven alloys to enhance the performance and broaden the application range of H 2 storage systems, stressing the need for innovative materials and system integration to satisfy future energy demands. High-throughput screening, combined with machine learning algorithms, is noted as a promising approach to identify patterns and predict the behavior of novel materials under various conditions, significantly reducing the time and cost associated with experimental trials. In closing, we discuss the increasing involvement of various companies in solid-state H 2 storage, particularly in prototype vehicles, from a techno-economic perspective. In conclusion, this forward-looking perspective underscores the necessity for ongoing material innovation and system optimization to meet the stringent energy demands and ambitious sustainability targets increasingly in demand.

25 ENERGY STORAGE↗

From Microparticles to Nanowires and Back: Radical Transformations in Plated Li Metal Morphology Revealed via in Situ Scanning Electron Microscopy

We report that Li metal is the preferred anode material for all-solid-state Li batteries. However, a stable plating and stripping of Li metal at the anode–solid electrolyte interface remains a significant challenge particularly at practically feasible current densities. This problem usually relates to high and/or inhomogeneous Li-electrode–electrolyte interfacial impedance and formation and growth of high-aspect-ratio dendritic Li deposits at the electrode–electrolyte interface, which eventually shunt the battery. To better understand details of Li metal plating, we use operando electron microscopy and Auger spectroscopy to probe nucleation, growth, and stripping of Li metal during cycling of a model solid-state Li battery as a function of current density and oxygen pressure. We find a linear correlation between the nucleation density of Li clusters and the charging rate in an ultrahigh vacuum, which agrees with a classical nucleation and growth model. Moreover, the trace amount of oxidizing gas (≈10 –6 Pa of O 2 ) promotes the Li growth in a form of nanowires due to a fine balance between the ion current density and a growth rate of a thin lithium-oxide shell on the surface of the metallic Li. Interestingly, increasing the partial pressure of O 2 to 10 –5 Pa resumes Li plating in a form of 3D particles. In conclusion, our results demonstrate the importance of trace amounts of preexisting or ambient oxidizing species on lithiation processes in solid-state batteries.

25 ENERGY STORAGE↗

Enhanced diamagnetic perturbations and electric currents observed downstream of the high power helicon

The high power helicon (HPH) is capable of producing a high density plasma (10{sup 17}-10{sup 18} m{sup -3}) and directed ion energies greater than 20 eV that continue to increase tens of centimeters downstream of the thruster. In order to understand the coupling mechanism between the helicon antenna and the plasma outside the immediate source region, measurements were made in the plasma plume downstream from the thruster of the propagating wave magnetic field and the perturbation of the axial bulk field using a type 'R' helicon antenna. This magnetic field perturbation ({Delta}B) peaks at more than 15 G in strength downstream of the plasma source, and is 3-5 times larger than those previously reported from HPH. Taking the curl of this measured magnetic perturbation and assuming azimuthal symmetry suggests that this magnetic field is generated by a (predominantly) azimuthal current ring with a current density on the order of tens of kA m{sup -2}. At this current density the diamagnetic field is intense enough to cancel out the B{sub 0} axial magnetic field near the source region. The presence of the diamagnetic current is important as it demonstrates modification of the vacuum fields well beyond the source region and signifies the presence of a high density, collimated plasma stream. This diamagnetic current also modifies the propagation of the helicon wave, which facilitates a better understanding of coupling between the helicon wave and the resultant plasma acceleration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Current Flow and Pair Creation at Low Altitude in Rotation-Powered Pulsars' Force-Free Magnetospheres: Space Charge Limited Flow

We report the results of an investigation of particle acceleration and electron-positron plasma generation at low altitude in the polar magnetic flux tubes of rotation-powered pulsars, when the stellar surface is free to emit whatever charges and currents are demanded by the force-free magnetosphere. We apply a new 1D hybrid plasma simulation code to the dynamical problem, using Particle-in-Cell methods for the dynamics of the charged particles, including a determination of the collective electrostatic fluctuations in the plasma, combined with a Monte Carlo treatment of the high-energy gamma-rays that mediate the formation of the electron-positron pairs.We assume the electric current flowing through the pair creation zone is fixed by the much higher inductance magnetosphere, and adopt the results of force-free magnetosphere models to provide the currents which must be carried by the accelerator. The models are spatially one dimensional, and designed to explore the physics, although of practical relevance to young, high-voltage pulsars. We observe novel behaviour (a) When the current density j is less than the Goldreich-Julian value (0 < j/j(sub GJ) < 1), space charge limited acceleration of the current carrying beam is mild, with the full Goldreich-Julian charge density comprising the charge densities of the beam and a cloud of electrically trapped particles with the same sign of charge as the beam. The voltage drops are of the order of mc(sup 2)/e, and pair creation is absent. (b) When the current density exceeds the Goldreich-Julian value (j/j(sub GJ) > 1), the system develops high voltage drops (TV or greater), causing emission of curvature gamma-rays and intense bursts of pair creation. The bursts exhibit limit cycle behaviour, with characteristic time-scales somewhat longer than the relativistic fly-by time over distances comparable to the polar cap diameter (microseconds). (c) In return current regions, where j/j(sub GJ) < 0, the system develops similar bursts of pair creation. These discharges are similar to those encountered in previous calculations by Timokhin of pair creation when the surface has a high work function and cannot freely emit charge. In cases (b) and (c), the intermittently generated pairs allow the system to simultaneously carry the magnetospherically prescribed currents and adjust the charge density and average electric field to force-free conditions. We also elucidate the conditions for pair creating beam flow to be steady (stationary with small fluctuations in the rotating frame), finding that such steady flows can occupy only a small fraction of the current density parameter space exhibited by the force-free magnetospheric model. The generic polar flow dynamics and pair creation are strongly time dependent. The model has an essential difference from almost all previous quantitative studies, in that we sought the accelerating voltage (with pair creation, when the voltage drops are sufficiently large; without, when they are small) as a function of the applied current.

Timokhin, A. N.↗

Excitation of plasma waves by nonlinear currents induced by a high-frequency electromagnetic pulse

Excitation of plasma waves by nonlinear currents induced by a high-frequency electromagnetic pulse is analyzed within the kinetic approach. It is shown that the most efficient source of plasma waves is the nonlinear current arising due to the gradient of the energy density of the high-frequency field. Generation of plasma waves by the drag current is usually less efficient but not negligibly small at relatively high frequencies of electron–ion collisions. The influence of electron collisions on the excitation of plasma waves by pulses of different duration is described quantitatively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High temperature superconductor materials and applications

Research on processing methods leading to a significant enhancement in the critical current densities (Jc) and the critical temperature (Tc) of high temperature superconducting in thin bulk and thin film forms. The fabrication of important devices for NASA unique applications (sensors) is investigated.

Doane, George B., III.↗

Unusually high critical current of clean P-doped BaFe{sub 2}As{sub 2} single crystalline thin film

Microstructurally clean, isovalently P-doped BaFe{sub 2}As{sub 2} (Ba-122) single crystalline thin films have been prepared on MgO (001) substrates by molecular beam epitaxy. These films show a superconducting transition temperature (T{sub c}) of over 30 K although P content is around 0.22, which is lower than the optimal one for single crystals (i.e., 0.33). The enhanced T{sub c} at this doping level is attributed to the in-plane tensile strain. The strained film shows high transport self-field critical current densities (J{sub c}) of over 6 MA/cm{sup 2} at 4.2 K, which are among the highest for Fe based superconductors (FeSCs). In-field J{sub c} exceeds 0.1 MA/cm{sup 2} at μ{sub 0}H=35 T for H‖ab and μ{sub 0}H=18 T for H‖c at 4.2 K, respectively, in spite of moderate upper critical fields compared to other FeSCs with similar T{sub c}. Structural investigations reveal no defects or misoriented grains pointing to strong pinning centers. We relate this unexpected high J{sub c} to a strong enhancement of the vortex core energy at optimal T{sub c}, driven by in-plane strain and doping. These unusually high J{sub c} make P-doped Ba-122 very favorable for high-field magnet applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Free electron terahertz wave radiation source with two-section periodical waveguide structures

We analyze a free electron terahertz wave radiation source with two-section periodical waveguide structure (PWS), where the first section (section-I) is used to pre-modulate the electron beam and the second section (section-II) is for terahertz wave generation. By means of theoretical analysis and numerical simulations, we demonstrate that the starting current density of the beam-wave interaction in section-II can be significantly reduced provided that the operation frequency is the harmonic of electron beam's pre-modulation frequency. This kind of source can generate relatively high power terahertz wave radiation but only need moderate beam current density. And it may have great potential application in developing the compact and high power terahertz wave radiation source.

07 ISOTOPE AND RADIATION SOURCES↗

Fully Printed High-Frequency Phased-Array Antenna on Flexible Substrate

To address the issues of flexible electronics needed for surface-to-surface, surface-to-orbit, and back-to-Earth communications necessary for manned exploration of the Moon, Mars, and beyond, a room-temperature printing process has been developed to create active, phased-array antennas (PAAs) on a flexible Kapton substrate. Field effect transistors (FETs) based on carbon nanotubes (CNTs), with many unique physical properties, were successfully proven feasible for phased-array antenna systems. The carrier mobility of an individual CNT is estimated to be at least 100,000 sq cm/V(dot)s. The CNT network in solution has carrier mobility as high as 46,770 sq cm/V(dot)s, and has a large current-density carrying capacity of approx. 1,000 mA/sq cm , which corresponds to a high carrying power of over 2,000 mW/ sq cm. Such high carrier mobility, and large current carrying capacity, allows the achievement of high-speed (>100 GHz), high-power, flexible electronic circuits that can be monolithically integrated on NASA s active phasedarray antennas for various applications, such as pressurized rovers, pressurized habitats, and spacesuits, as well as for locating beacon towers for lunar surface navigation, which will likely be performed at S-band and attached to a mobile astronaut. A fully printed 2-bit 2-element phasedarray antenna (PAA) working at 5.6 GHz, incorporating the CNT FETs as phase shifters, is demonstrated. The PAA is printed out at room temperature on 100-mm thick Kapton substrate. Four CNT FETs are printed together with microstrip time delay lines to function as a 2-bit phase shifter. The FET switch exhibits a switching speed of 0.2 ns, and works well for a 5.6-GHz RF signal. The operating frequency is measured to be 5.6 GHz, versus the state-of-the-art flexible FET operating frequency of 52 MHz. The source-drain current density is measured to be over 1,000 mA/sq cm, while the conventional organic FETs, and single carbon nanotube-based FETs, are typically in the mA to mA/sq cm range. The switching voltage used is 1.8 V, while the state-of-the-art flexible FET has a gate voltage around 50 V. The gate voltage can effectively control the source-drain current with an ON-OFF ratio of over 1,000 obtained at a low Vds bias of 1.8 V. The azimuth steering angles of PAA are measured at 0deg, -14.5deg, -30deg, and 48.6deg. The measured far-field patterns agree well with simulation results. The efficiency of the 2-bit 2-element PAA is measured to be 39 percent, including the loss of transmission line, FET switch, and coupling loss of RF probes. With further optimization, the efficiency is expected to be around 50-60 percent.

Chen, Yihong↗

Double-sided Tl{sub 2}Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10} thin films based high temperature superconducting filter operating above 100 K

A high temperature superconducting (HTS) filter on double-sided Tl{sub 2}Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10} (Tl-2223) thin films is designed in this letter. High-quality double-sided Tl-2223 thin films are prepared on 10 × 10 × 0.5 mm{sup 3} LaAlO{sub 3} (001) substrate. The critical temperatures T{sub c} of the films are 120 ± 1 K and the critical current densities J{sub c} are 3–4 MA/cm{sup 2} at 77 K for both sides. X-ray diffraction θ-2θ scans and rotational ϕ-scans prove that the films are strongly textured with the c axis perpendicular to the substrate surface. A 3-pole band-pass filter is then fabricated on the Tl-2223 thin films with 4% relative bandwidth and a center frequency of 4.0 GHz. At 77 K, 100 K, and 102 K, the insertion loss in the passband is 0.088 dB, 0.21 dB, and 0.27 dB, respectively. These performances show that the proposed HTS filter is satisfying even when the operating temperature is above 100 K, which makes it possible to work in outer space without cryogenic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxygen Vacancies Enriched Bi Based Catalysts for Enhancing Electrocatalytic CO2 Reduction to Formate

The practical application of CO2 conversion through electrochemical reduction is still hindered by the lack of high performance and cost-effective catalysts. It is thus imperative to explore feasible strategies for scalable fabrication of catalysts for CO2 reduction to targeting products with high efficiency. Herein, for the first time, a hybrid of BiOx encapsulated in carbon thin layer is developed as high active electrocatalyst for CO2 conversion, which is synthesized by pyrolysis using Bi MOF as precursor and sacrificial template. The carbon layer overcoating BiOx catalyst exhibits superior performance for CO2 reduction to formate, achieving a maximum Faradaic efficiency of 89.3 % and a maximum current density of 37.8 mA cm-2. It is found that the as-prepared BiOx catalyst is enriched with oxygen vacancies stabilized by the encapsulating carbon layer. Both the carbon layer and oxygen vacancies improve the charge transfer of the catalyst, in favor of the high formate current density. The defects of oxygen vacancies play a vital role in CO2 adsorption and activation and thereby further enhancing the electrocatalytic ability for formate production.

oxygen vacancy, bismuth, carbon coating, CO2 elect↗