Search NASA⌕ Search

SEARCH · Search NASA

Results for “High order method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

On the Routh approximation technique and least squares errors

A new method for calculating the coefficients of the numerator polynomial of the direct Routh approximation method (DRAM) using the least square error criterion is formulated. The necessary conditions have been obtained in terms of algebraic equations. The method is useful for low frequency as well as high frequency reduced-order models.

Aburdene, M. F.↗

Transonic rotor noise: Theoretical and experimental comparisons

Two complementary methods of describing the high speed rotor noise problem are discussed. The first method uses the second order transonic potential equation to define and characterize the nature of the aerodynamic and acoustic fields and to explain the appearance of radiating shock waves. The second employs the Ffowcs Williams and Hawkings equation to successfully calculate the acoustic far field. Good agreement between theoretical and experimental waveforms is shown for transonic hover tip Mach numbers from 0.8 to 0.9.

Schmitz, F. H.↗

Input current shaped ac-to-dc converters

Input current shaping techniques for ac-to-dc converters were investigated. Input frequencies much higher than normal, up to 20 kHz were emphasized. Several methods of shaping the input current waveform in ac-to-dc converters were reviewed. The simplest method is the LC filter following the rectifier. The next simplest method is the resistor emulation approach in which the inductor size is determined by the converter switching frequency and not by the line input frequency. Other methods require complicated switch drive algorithms to construct the input current waveshape. For a high-frequency line input, on the order of 20 kHz, the simple LC cannot be discarded so peremptorily, since the inductor size can be compared with that for the resistor emulation method. In fact, since a dc regulator will normally be required after the filter anyway, the total component count is almost the same as for the resistor emulation method, in which the filter is effectively incorporated into the regulator.

Source record↗

Edge-restraint deformation processing of aluminides and other powders

The novel, 'edge-restraint rolling' method has been developed in order to facilitate the thickness reduction of brittle, high strength alloys to the degree of thin plates or sheets, by first hot-compacting the prealloyed powders into billets and conducting the thickness reduction in a series of reheats and roll passes. Attention is presently given to the cases of equiatomic aluminide FeAl, (Ni,Fe)3Al, and an Al-Fe alloy. The flat-rolled products thus obtained may lead to the development of components not otherwise formable for powerplant and other aerospace applications.

Bhattacharyya, S.↗

A recursive approach to the equations of motion for the maneuvering and control of flexible multi-body systems

Interest lies in a mathematical formulation capable of accommodating the problem of maneuvering a space structure consisting of a chain of articulated flexible substructures. Simultaneously, any perturbations from the 'rigid body' maneuvering and any elastic vibration must be suppressed. The equations of motion for flexible bodies undergoing rigid body motions and elastic vibrations can be obtained conveniently by means of Lagrange's equations in terms of quasi-coordinates. The advantage of this approach is that it yields equations in terms of body axes, which are the same axes that are used to express the control forces and torques. The equations of motion are nonlinear hybrid differential quations. The partial differential equations can be discretized (in space) by means of the finite element method or the classical Rayleigh-Ritz method. The result is a set of nonlinear ordinary differential equations of high order. The nonlinearity can be traced to the rigid body motions and the high order to the elastic vibration. Elastic motions tend to be small when compared with rigid body motions.

Kwak, Moon K.↗

Towards large eddy and direct simulation of complex turbulent flows

Recent advances in the methodology for direct numerical simulation of turbulent flows and some of the current applications are reviewed. It is argued that high-order finite difference schemes yield solutions with comparable accuracy to the spectral methods with the same number of degrees of freedom. The effects of random inflow conditions on the downstream evolution of turbulence are discussed.

Moin, Parviz↗

Two-Stage Reduction Of Dynamical Models

No longer necessary to solve eigenvalue problems of high order. Component-mode projection-and-assembly model-reduction (COMPARE) method provides approximation of dynamics of vibrations of complicated, multiple flexible bodies by use of mathematical models of reduced order. Incorporates component-mode synthesis (CMS) method and enhanced projection-and-assembly (EP&A) method, described in "Enhanced Method of Reduction of Dynamical Models" (NPO-18402), providing for somewhat simplified two-stage process in which order of applicable mathematical models reduced. Reduced-order models used to design algorithms of control systems to suppress vibrations or otherwise control structure.

Lee, Allan Y.↗

Airfoil shape optimization using sensitivity analysis on viscous flow equations

An aerodynamic shape optimization method has previously been developed by the authors using the Euler equations and has been applied to supersonic-hypersonic nozzle designs. This method has also included a flowfield extrapolation (or flow prediction) method based on the Taylor series expansion of an existing CFD solution. The present paper reports on the extension of this method to the thin-layer Navier-Stokes equations in order to account for the viscous effects. Also, to test the method under highly nonlinear conditions, it has been applied to the transonic flows. Initially, the success of the flow prediction method is tested. Then, the overall method is demonstrated by optimizing the shapes of two supercritical transonic airfoils at zero angle of attack. The first one is shape optimized to achieve a minimum drag while obtaining a lift above a specified value. Whereas, the second one is shape optimized for a maximum lift while attaining a drag below a specified value. The results of these two cases indicate that the present method can produce successfully optimized aerodynamic shapes.

Eleshaky, Mohamed E.↗

Statistical Mechanics and Dynamics of the Outer Solar System.I. The Jupiter/Saturn Zone

We report on numerical simulations designed to understand how the solar system evolved through a winnowing of planetesimals accreeted from the early solar nebula. This sorting process is driven by the energy and angular momentum and continues to the present day. We reconsider the existence and importance of stable niches in the Jupiter/Saturn Zone using greatly improved numerical techniques based on high-order optimized multi-step integration schemes coupled to roundoff error minimizing methods.

numerical simulations planetesimals planet formati↗

Direct Simulation of Flow over A Wall-Mounted Hump

Simulating separated flows at high Reynolds numbers using Reynolds Averaged Navier-Stokes (RANS) modeled equations remains a challenge in aeronautics. The main hindrance to progress stems from the lack of extended de- tailed data pertinent to the root cause of failure of RANS models, as well as the little progress in RANS modeling innovations in the past several decades. The goal of the current effort is to generate data for separated flow at a Reynolds numbers where conventional models are challenged. We use Direct Numerical Simulations to model turbulent flow over the wall-mounted hump configuration to investigate the physics of flow separation and boundary layer recovery, as well as provide data relevant to the modeling community. A chord-based Reynolds number of Re(sub c) = 47,500 is considered with a turbulent inflow profile of Re(sub θ) = 1,400 (θ /c = 3%). We use FDL3DI, a code that solves the compressible Navier-Stokes equations using high-order compact-difference scheme and filter, with the standard re- cycling/rescaling method of generating turbulent boundary layers as inflow to the computational domain. Two differ- ent configurations of the upper-wall are analyzed for two sets of boundary conditions (slip and no-slip). The results are compared with the available higher Re(sub c) (= 936,000, Re(sub θ) = 7,200, θ /c = 0.77%) experiment for major flow features. The simulated lower Rec allows for DNS-like mesh resolutions, and adequately wide spans. The results from these simulations show earlier separation and delayed reattachment compared to Re(sub c) = 936,000, and significantly higher skin friction in the forebody of the hump. We also find that the upper-wall shape and boundary condition influence pressure distribution over the hump, whereas skin friction is only influenced by the boundary condition.

Wall-Mounted↗

First-Order Reversal Curve Probing of Spatially Resolved Polarization Dynamics in Ferroelectric Nanocapacitors

Spatially resolved polarization switching in ferroelectric nanocapacitors was studied on the sub-25 nm scale using the first-order reversal curve (FORC) method. The chosen capacitor geometry allows both a high-veracity observation of the ferroelastic domain structure and the mapping of polarization switching in a uniform field, synergistically combining microstructural observations and probing of uniform-field polarization responses as relevant to device operation. A classical Kolmogorov-Avrami-Ishibashi model has been adapted to the voltage domain and the individual switching dynamics of the FORC response curves are well approximated by the adapted model. The comparison with microstructures suggests a strong spatial variability of the switching dynamics inside the nanocapacitors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Method and apparatus for recirculation with control of synchrotron radiation

A method for controlling beam quality degradation from ISR and CSR and stabilizing the microbunching instability (.mu.BI) in a high brightness electron beam. The method includes providing a super-periodic second order achromat line with each super period being individually linearly achromatic and isochronous, setting individual superperiod tunes to rational fractions of an integer (such as 4.sup.th or 6.sup.th integers), setting individual bend angles to be as small as practical to reduce driving terms due to dispersion and dispersive angle, and setting bend radii as large enough to suppress ISR but not negatively affect the radial dependence of CSR. The method includes setting the structure of the individual superperiods to minimize bend plane beam envelope values in the dipoles to reduce betatron response to a CSR event at a dispersed location, increasing beam angular divergence, and creating dispersion nodes in the dipoles to similarly reduce response to CSR events, and limit R.sub.56 modulation in order to mitigate .mu.BI.

42 ENGINEERING↗

Multigrid Algorithms with Projection and Prolongation over Elements of the Phase Space for K-Eigenvalue Transport Problems

This paper describes new multilevel acceleration methods for solving the multigroup neu- tron transport eigenvalue problems. These multilevel algorithms use different projection and prolongation operators in the phase space. The Nonlinear Diffusion Acceleration (NDA) method with multiple grids in energy is formulated with the prolongation oper- ator based on multiplication iterative correction and linear-in-energy mapping. Another multilevel NDA method uses the projection operator with coarsening in energy between the high-order transport and low-order NDA equations. The third algorithm is formu- lated with the partial-current based CMFD low-order equations and applies projection operators in space and energy. The numerical results are presented.

Cornejo, Luke↗

Parallel 3D Finite Element Particle-in-Cell Simulations with Pic3P

SLAC's Advanced Computations Department (ACD) has developed the parallel 3D Finite Element electromagnetic Particle-In-Cell code Pic3P. Designed for simulations of beam-cavity interactions dominated by space charge effects, Pic3P solves the complete set of Maxwell-Lorentz equations self-consistently and includes space-charge, retardation and boundary effects from first principles. Higher-order Finite Element methods with adaptive refinement on conformal unstructured meshes lead to highly efficient use of computational resources. Massively parallel processing with dynamic load balancing enables large-scale modeling of photoinjectors with unprecedented accuracy, aiding the design and operation of next-generation accelerator facilities. Applications include the LCLS RF gun and the BNL polarized SRF gun.

43 PARTICLE ACCELERATORS↗

A viscous vortex lattice method for analysis of cross-flow propellers and turbines

Marine hydrokinetic turbines are a promising source of renewable energy, but the costs of existing cross-flow turbine designs are too high. In order to develop new designs with reduced costs, there exists a need for a low-order computational model that is simultaneously fast, accurate, and robust. In this report we present a novel theoretical model for the analysis of cross-flow propellers and turbines based on the vortex lattice method (VLM). In order to overcome the limitation that the VLM ignores viscous effects (such as trailing-edge flow separation), we present a novel method to account for viscous-thickness-load coupling (VTLC). In order to overcome the difficulty that wake passages cause the VLM to be unstable, we present the panel-averaged induced velocity for the influence of wake vortices on the blades. Herein, we describe our model and provide verification versus RANS CFD. Results show that our VLM + VTLC model predictions are three times more accurate than prior low-order models (i.e. three times lower root mean square error to high-fidelity RANS results) yet 10,000 times faster than RANS over a wide range of operating conditions.

16 TIDAL AND WAVE POWER↗

Direct/Alternating Current Electrochemical Method for Removing and Recovering Heavy Metal from Water Using Graphene Oxide Electrode

Treatment of heavy-metal pollution in both point-of-use water and industrial wastewater is critical in protecting human health and the environment. Current methods for heavy-metal treatment in both sources have limitations. For point-of-use water, current methods usually suffer from limited capacity and difficulties in spontaneously removing multiple heavy metals. For industrial wastewater, current methods greatly reduce the value of heavy metal by precipitating them as sludge which requires further treatment. Here we developed an electrochemical method that can treat both low-concentration and high-concentration heavy-metal pollution using either direct current (DC) or alternating current (AC) electrodeposition with graphene-oxide-modified carbon felt electrode (CF-GO). The graphene oxide provides a high density of surface functional groups to assist the electrodeposition. The electrodeposition method showed 2 orders of magnitude higher capacity (>29 g heavy metal for 1 g of graphene oxide) compared with traditional adsorption methods. For low levels of heavy-metal pollution in point-of-use water, DC electrodeposition with a CF-GO electrode can reduce single heavy-metal ion pollution (Cu, Cd, and Pb) as well as multiple ion mixtures to below safe water drinking levels. This method can tolerate a much wider range of heavy-metal pollution in point-of-use water than traditional adsorption methods. For high-level pollution in industrial wastewater, AC electrodeposition can recover >99.9% heavy-metal ions. Finally, by tuning the AC frequency and voltage, the electrodeposition method can further selectively recover Cu, Cd, and Pb separately, which adds values to the heavy-metal removal process.

36 MATERIALS SCIENCE↗

Dynamic Snap-Through of Thin-Walled Structures by a Reduced Order Method

The goal of this investigation is to further develop nonlinear modal numerical simulation methods for application to geometrically nonlinear response of structures exposed to combined high intensity random pressure fluctuations and thermal loadings. The study is conducted on a flat aluminum beam, which permits a comparison of results obtained by a reduced-order analysis with those obtained from a numerically intensive simulation in physical degrees-of-freedom. A uniformly distributed thermal loading is first applied to investigate the dynamic instability associated with thermal buckling. A uniformly distributed random loading is added to investigate the combined thermal-acoustic response. In the latter case, three types of response characteristics are considered, namely: (i) small amplitude vibration around one of the two stable buckling equilibrium positions, (ii) intermittent snap-through response between the two equilibrium positions, and (iii) persistent snap-through response between the two equilibrium positions. For the reduced order analysis, four categories of modal basis functions are identified including those having symmetric transverse (ST), anti-symmetric transverse (AT), symmetric in-plane (SI), and anti-symmetric in-plane (AI) displacements. The effect of basis selection on the quality of results is investigated for the dynamic thermal buckling and combined thermal-acoustic response. It is found that despite symmetric geometry, loading, and boundary conditions, the AT and SI modes must be included in the basis as they participate in the snap-through behavior.

Przekop, Adam↗

Dynamic Snap-Through of Thermally Buckled Structures by a Reduced Order Method

The goal of this investigation is to further develop nonlinear modal numerical simulation methods for application to geometrically nonlinear response of structures exposed to combined high intensity random pressure fluctuations and thermal loadings. The study is conducted on a flat aluminum beam, which permits a comparison of results obtained by a reduced-order analysis with those obtained from a numerically intensive simulation in physical degrees-of-freedom. A uniformly distributed thermal loading is first applied to investigate the dynamic instability associated with thermal buckling. A uniformly distributed random loading is added to investigate the combined thermal-acoustic response. In the latter case, three types of response characteristics are considered, namely: (i) small amplitude vibration around one of the two stable buckling equilibrium positions, (ii) intermittent snap-through response between the two equilibrium positions, and (iii) persistent snap-through response between the two equilibrium positions. For the reduced-order analysis, four categories of modal basis functions are identified including those having symmetric transverse, anti-symmetric transverse, symmetric in-plane, and anti-symmetric in-plane displacements. The effect of basis selection on the quality of results is investigated for the dynamic thermal buckling and combined thermal-acoustic response. It is found that despite symmetric geometry, loading, and boundary conditions, the anti-symmetric transverse and symmetric in-plane modes must be included in the basis as they participate in the snap-through behavior.

Przekop, Adam↗