Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model Inference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Simultaneous inference of the compressibility and inelastic response of tantalum under extreme loading

We study the deformation of tantalum under extreme loading conditions. Experimental velocity data are drawn from both ramp loading experiments on Sandia’s Z-machine and gas gun compression experiments. The drive conditions enable the study of materials under pressures greater than 100 GPa. We provide a detailed forward model of the experiments including a model of the magnetic drive for the Z-machine. Utilizing these experiments, we simultaneously infer several different types of physically motivated parameters describing equation of state, plasticity, and anelasticity via the computational device of Bayesian model calibration. Characteristics of the resulting calculated posterior distributions illustrate relationships among the parameters of interest via the degree of cross correlation. The calibrated velocity traces display good agreement with the experiments up to experimental uncertainty as well as improvement over previous calibrations. Examining the Z-shots and gun-shots together and separately reveals a trade-off between accuracy and transferability across different experimental conditions. Implications for model calibration, limitations from model form, and suggestions for improvements are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Variation-Resilient FeFET-Based In-Memory Computing Leveraging Probabilistic Deep Learning

Reliability issues stemming from device level nonidealities of nonvolatile emerging technologies like ferroelectric field-effect transistors (FeFETs), especially at scaled dimensions, cause substantial degradation in the accuracy of in-memory crossbar-based AI systems. Here, in this work, we present a variation-aware design technique to characterize the device level variations and to mitigate their impact on hardware accuracy employing a Bayesian neural network (BNN) approach. An effective conductance variation model is derived from the experimental measurements of cycle-to-cycle (C2C) and device-to-device (D2D) variations performed on FeFET devices fabricated using 28 nm high-k metal gate technology. The variations were found to be a function of different conductance states within the given programming range, which sharply contrasts earlier efforts where a fixed variation dispersion was considered for all conductance values. Such variation characteristics formulated for three different device sizes at different read voltages were provided as prior variation information to the BNN to yield a more exact and reliable inference. Near-ideal accuracy for shallow networks (MLP5 and LeNet models) on the MNIST dataset and limited accuracy decline by ~3.8%–16.1% for deeper AlexNet models on CIFAR10 dataset under a wide range of variations corresponding to different device sizes and read voltages, demonstrates the efficacy of our proposed device-algorithm co-design technique.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Computing Nonlinear Power Spectra Across Dynamical Dark Energy Model Space with Neural ODEs

I show how to compute the nonlinear power spectrum across the entire $w(z)$ dynamical dark energy model space. Using synthetic ΛCDM data, I train a neural ordinary differential equation (ODE) to infer the evolution of the nonlinear matter power spectrum as a function of the background expansion and mean matter density across ∼9 Gyr of cosmic evolution. After training, the model generalises to any dynamical dark energy model parameterised by $w(z)$. With little optimisation, the neural ODE is accurate to within 4% up to $k = 5\, h\, {\mathrm Mpc}^{−1}$. Unlike simulation rescaling methods, neural ODEs naturally extend to summary statistics beyond the power spectrum that are sensitive to the growth history.

cosmology↗
DOE OSTI2017

Predictive coarse-graining

We propose a data-driven, coarse-graining formulation in the context of equilibrium statistical mechanics. In contrast to existing techniques which are based on a fine-to-coarse map, we adopt the opposite strategy by prescribing a probabilistic coarse-to-fine map. This corresponds to a directed probabilistic model where the coarse variables play the role of latent generators of the fine scale (all-atom) data. From an information-theoretic perspective, the framework proposed provides an improvement upon the relative entropy method and is capable of quantifying the uncertainty due to the information loss that unavoidably takes place during the coarse-graining process. Furthermore, it can be readily extended to a fully Bayesian model where various sources of uncertainties are reflected in the posterior of the model parameters. The latter can be used to produce not only point estimates of fine-scale reconstructions or macroscopic observables, but more importantly, predictive posterior distributions on these quantities. Predictive posterior distributions reflect the confidence of the model as a function of the amount of data and the level of coarse-graining. The issues of model complexity and model selection are seamlessly addressed by employing a hierarchical prior that favors the discovery of sparse solutions, revealing the most prominent features in the coarse-grained model. A flexible and parallelizable Monte Carlo – Expectation–Maximization (MC-EM) scheme is proposed for carrying out inference and learning tasks. A comparative assessment of the proposed methodology is presented for a lattice spin system and the SPC/E water model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

A curated benchmark for cofolding models on kinase conformational states

Abstract Protein kinases are critical drug targets, requiring therapeutics that can modulate their active and inactive conformational states. While cofolding models can generate global folds directly from kinase sequences and ligand SMILES strings, these models have not yet been tested on their ability to recover ligand-induced-fit conformational states of the kinase proteins. Here, we introduce KinConfBench, a curated benchmark of 2225 high-quality human kinase chains to evaluate the ability of four state-of-the-art cofolding models—Boltz-2, Chai-1, Protenix, and RoseTTAFold-All-Atom—to recover both canonical and rare conformational states. We show that geometric success metrics of a ligand pose in the active site do not correlate strongly with the correct kinase conformational state, motivating a new set of dynamical benchmarks for assessing cofolding models. While all four cofolding models achieve ~60–80% prediction accuracy for kinase conformational classification, they exhibit severe mode collapse when performing multiple inferences, show negligible structural diversity in sampling induced-fit motions, and display a prevalent “apo-drift” in which most cofolding models predominantly predict the kinase to be in its ligand-free state. Our results highlight that capturing ligand-induced protein conformational diversity, not just geometric fit, is critical for next-generation structure-based drug discovery.

Sun, Kunyang↗
DOE OSTI2022

Hybrid Recurrent Neural Network Modeling for Traffic Delay Prediction at Signalized Intersections Along an Urban Arterial

This paper studies the traffic delay prediction modeling for multiple signalized intersections along the Ala Moana Boulevard and Nimitz Highway in Hawaii. Several machine learning (ML) based approaches have been studied in the literature, and most of them focused on prediction accuracy rather than the end use of real-time control and implementation. These ML models tend to be very complex and non-linear in nature, making it challenging to achieve fast inferences and are computationally heavy for real-time signal control implementation. As such, in this paper, a simple yet accurate hybrid modeling method is proposed to predict traffic delay one-step ahead with the model made suitable for real-time implementation to control traffic flow. Since real-time road-side measurements are recorded in unstructured form, the paper also discusses other issues related to data extraction and the pre-processing process. Finally, a simple signal control loop is developed to demonstrate the proposed modeling approach, which has shown advantages in model accuracy and computation efficiency compared against several existing modeling methods.

42 ENGINEERING↗
DOE OSTI2016

STELLAR ATMOSPHERES, ATMOSPHERIC EXTENSION, AND FUNDAMENTAL PARAMETERS: WEIGHING STARS USING THE STELLAR MASS INDEX

One of the great challenges of understanding stars is measuring their masses. The best methods for measuring stellar masses include binary interaction, asteroseismology, and stellar evolution models, but these methods are not ideal for red giant and supergiant stars. In this work, we propose a novel method for inferring stellar masses of evolved red giant and supergiant stars using interferometric and spectrophotometric observations combined with spherical model stellar atmospheres to measure what we call the stellar mass index, defined as the ratio between the stellar radius and mass. The method is based on the correlation between different measurements of angular diameter, used as a proxy for atmospheric extension, and fundamental stellar parameters. For a given star, spectrophotometry measures the Rosseland angular diameter while interferometric observations generally probe a larger limb-darkened angular diameter. The ratio of these two angular diameters is proportional to the relative extension of the stellar atmosphere, which is strongly correlated to the star’s effective temperature, radius, and mass. We show that these correlations are strong and can lead to precise measurements of stellar masses.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Deep Learning Based Superconducting Radio-Frequency Cavity Fault Classification at Jefferson Laboratory

This work investigates the efficacy of deep learning (DL) for classifying C100 superconducting radio-frequency (SRF) cavity faults in the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab. CEBAF is a large, high-power continuous wave recirculating linac that utilizes 418 SRF cavities to accelerate electrons up to 12 GeV. Recent upgrades to CEBAF include installation of 11 new cryomodules (88 cavities) equipped with a low-level RF system that records RF time-series data from each cavity at the onset of an RF failure. Typically, subject matter experts (SME) analyze this data to determine the fault type and identify the cavity of origin. This information is subsequently utilized to identify failure trends and to implement corrective measures on the offending cavity. Manual inspection of large-scale, time-series data, generated by frequent system failures is tedious and time consuming, and thereby motivates the use of machine learning (ML) to automate the task. This study extends work on a previously developed system based on traditional ML methods (Tennant and Carpenter and Powers and Shabalina Solopova and Vidyaratne and Iftekharuddin, Phys. Rev. Accel. Beams, 2020, 23, 114601), and investigates the effectiveness of deep learning approaches. The transition to a DL model is driven by the goal of developing a system with sufficiently fast inference that it could be used to predict a fault event and take actionable information before the onset (on the order of a few hundred milliseconds). Because features are learned, rather than explicitly computed, DL offers a potential advantage over traditional ML. Specifically, two seminal DL architecture types are explored: deep recurrent neural networks (RNN) and deep convolutional neural networks (CNN). We provide a detailed analysis on the performance of individual models using an RF waveform dataset built from past operational runs of CEBAF. In particular, the performance of RNN models incorporating long short-term memory (LSTM) are analyzed along with the CNN performance. Furthermore, comparing these DL models with a state-of-the-art fault ML model shows that DL architectures obtain similar performance for cavity identification, do not perform quite as well for fault classification, but provide an advantage in inference speed.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Extracting a mixing parameter from 2D radiographic imaging of variable-density turbulent flow

We extract a suitably averaged fluctuating density from the two-dimensional radiographic image of a flow. The X-ray attenuation is given by the Beer–Lambert law which exponentially damps the incident beam intensity by a factor proportional to the density, opacity and thickness of the target. By making reasonable assumptions for the mean density, opacity and effective thickness of the target flow, we estimate the density fluctuation contribution to the attenuation. The extracted density fluctuations averaged across the thickness of the flow in the direction of the beam may be used to form the density–specific-volume correlation $b$. In a statistical description of variable-density turbulence, $b$ quantifies the degree of mixedness. The ability to extract a measure of mixedness from experimental data would be a powerful tool that could be used in the validation of mix models. The scheme proposed is tested for DNS data computed for variable density buoyancy-driven mixing. We quantify the deficits in the extracted value of $b$ due to target thickness, Atwood number and modeled signal noise. This analysis justifies using the proposed scheme to infer the mix parameter from thin targets at moderate to low Atwood numbers. Furthermore, to illustrate how the scheme might be used in a practical problem, we demonstrate its application to a radiographic image of counter-shear flow obtained from experiments at the National Ignition Facility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Spatially resolved X-ray emission measurements of the residual velocity during the stagnation phase of inertial confinement fusion implosion experiments

A technique for measuring residual motion during the stagnation phase of an indirectly driven inertial confinement experiment has been implemented. This method infers a velocity from spatially and temporally resolved images of the X-ray emission from two orthogonal lines of sight. This work investigates the accuracy of recovering spatially resolved velocities from the X-ray emission data. A detailed analytical and numerical modeling of the X-ray emission measurement shows that the accuracy of this method increases as the displacement that results from a residual velocity increase. For the typical experimental configuration, signal-to-noise ratios, and duration of X-ray emission, it is estimated that the fractional error in the inferred velocity rises above 50% as the velocity of emission falls below 24 μm/ns. By inputting measured parameters into this model, error estimates of the residual velocity as inferred from the X-ray emission measurements are now able to be generated for experimental data. Details of this analysis are presented for an implosion experiment conducted with an unintentional radiation flux asymmetry. The analysis shows a bright localized region of emission that moves through the larger emitting volume at a relatively higher velocity towards the location of the imposed flux deficit. This technique allows for the possibility of spatially resolving velocity flows within the so-called central hot spot of an implosion. This information would help to refine our interpretation of the thermal temperature inferred from the neutron time of flight detectors and the effect of localized hydrodynamic instabilities during the stagnation phase. Across several experiments, along a single line of sight, the average difference in magnitude and direction of the measured residual velocity as inferred from the X-ray and neutron time of flight detectors was found to be ∼13 μm/ns and ∼14°, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Fiats: Functional inference and training for surrogates

Fiats provides a platform for research on the training and deployment of neural-network surrogate models for computational science. Fiats also supports exploring, advancing, and combining functional, object-oriented, and parallel programming patterns in Fortran 2023. As such, the Fiats name has dual expansions: “Functional Inference And Training for Surrogates” or “Fortran Inference And Training for Science.” Fiats inference and training procedures are pure and therefore satisfy a language constraint imposed on procedure invocations inside Fortran’s parallel loop construct: do concurrent. Furthermore, the Fiats training procedures are built around a do concurrent parallel reduction. Several compilers can automatically parallelize do concurrent on Central Processing Units (CPUs) or Graphics Processing Units (GPUs). Fiats thus aims to achieve performance portability through standard language mechanisms.

Rouson, Damian [Lawrence Berkeley National Laborat↗
DOE OSTI2022

Uncertainty quantification for Bayesian active learning in rupture life prediction of ferritic steels

Abstract Three probabilistic methodologies are developed for predicting the long-term creep rupture life of 9–12 wt%Cr ferritic-martensitic steels using their chemical and processing parameters. The framework developed in this research strives to simultaneously make efficient inference along with associated risk, i.e., the uncertainty of estimation. The study highlights the limitations of applying probabilistic machine learning to model creep life and provides suggestions as to how this might be alleviated to make an efficient and accurate model with the evaluation of epistemic uncertainty of each prediction. Based on extensive experimentation, Gaussian Process Regression yielded more accurate inference ( $$Pearson\;correlation\;coefficent> 0.95$$ P e a r s o n c o r r e l a t i o n c o e f f i c e n t > 0.95 for the holdout test set) in addition to meaningful uncertainty estimate (i.e., coverage ranges from 94 to 98% for the test set) as compared to quantile regression and natural gradient boosting algorithm. Furthermore, the possibility of an active learning framework to iteratively explore the material space intelligently was demonstrated by simulating the experimental data collection process. This framework can be subsequently deployed to improve model performance or to explore new alloy domains with minimal experimental effort.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2016

Galactoseismology and the local density of dark matter

Here, we model vertical breathing mode perturbations in the Milky Way's stellar disc and study their effects on estimates of the local dark matter density, surface density, and vertical force. Evidence for these perturbations, which involve compression and expansion of the Galactic disc perpendicular to its midplane, come from the SEGUE, RAVE, and LAMOST surveys. We show that their existence may lead to systematic errors of $10\%$ or greater in the vertical force $K_z(z)$ at $|z|=1.1\,{\rm kpc}$. These errors translate to $\gtrsim 25\%$ errors in estimates of the local dark matter density. Using different mono-abundant subpopulations as tracers offers a way out: if the inferences from all tracers in the Gaia era agree, then the dark matter determination will be robust. Disagreement in the inferences from different tracers will signal the breakdown of the unperturbed model and perhaps provide the means for determining the nature of the perturbation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

An Efficient Bayesian Approach to Learning Droplet Collision Kernels: Proof of Concept Using “Cloudy,” a New n -Moment Bulk Microphysics Scheme

The small-scale microphysical processes governing the formation of precipitation particles cannot be resolved explicitly by cloud resolving and climate models. Instead, they are represented by microphysics schemes that are based on a combination of theoretical knowledge, statistical assumptions, and fitting to data (“tuning”). Historically, tuning was done in an ad hoc fashion, leading to parameter choices that are not explainable or repeatable. Recent work has treated it as an inverse problem that can be solved by Bayesian inference. The posterior distribution of the parameters given the data—the solution of Bayesian inference—is found through computationally expensive sampling methods, which require over $\mathcal{O}$(10 5 ) evaluations of the forward model; this is prohibitive for many models. We present a proof of concept of Bayesian learning applied to a new bulk microphysics scheme named “Cloudy,” using the recently developed Calibrate-Emulate-Sample (CES) algorithm. Cloudy models collision-coalescence and collisional breakup of cloud droplets with an adjustable number of prognostic moments and with easily modifiable assumptions for the cloud droplet mass distribution and the collision kernel. The CES algorithm uses machine learning tools to accelerate Bayesian inference by reducing the number of forward evaluations needed to $\mathcal{O}$(10 2 ). It also exhibits a smoothing effect when forward evaluations are polluted by noise. In a suite of perfect-model experiments, we show that CES enables computationally efficient Bayesian inference of parameters in Cloudy from noisy observations of moments of the droplet mass distribution. In an additional imperfect-model experiment, a collision kernel parameter is successfully learned from output generated by a Lagrangian particle-based microphysics model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Onset of magma ocean solidification on Mars inferred from Mn-Cr chronometry

The mantle of Mars probably differentiated through the crystallization of a magma ocean during the first tens of million years (Ma) of Solar System evolution. However, the exact timescale of large-scale silicate differentiation of the martian mantle is debated, and in particular, it remains unclear when differentiation commenced. In this paper, we applied the short-lived 53 Mn- 53 Cr system to martian meteorites in order to date the onset of large-scale mantle differentiation on Mars. The new Cr isotope data demonstrate that martian meteorites exhibit no resolvable radiogenic 53 Cr variations, and instead have a uniform +20.2±1.2 (95% conf.) parts-per-million excess in 53 Cr/ 52 Cr relative to the terrestrial mantle. The investigated groups of martian meteorites are lithologically varied and derive from diverse mantle sources that probably had variable Mn/Cr. Hence, the lack of 53 Cr variability among martian meteorites demonstrates that silicate differentiation on Mars occurred after the extinction of 53 Mn. Provided that the sources of the martian meteorites have Mn/Cr variations that are typical of the terrestrial planets, this result implies that the onset of large-scale silicate differentiation must have occurred later than 20±5 Ma after Solar System formation. The onset of silicate differentiation on Mars inferred here is significantly later than time estimates for segregation of the martian core which conservatively occurred within <10 Ma after Solar System formation. Thus, the new Mn-Cr data imply that there was a small, but resolvable, time gap of at least 5 Ma between core formation and magma ocean solidification on Mars. If the age of core segregation is taken at face value, our results imply that the martian magma ocean remained mostly molten over several Ma. This inferred longevity of the magma ocean is inconsistent with thermal models predicting rapid (<1 Ma) solidification of the martian magma ocean. Although there is currently no unique solution to this conundrum, our results can potentially be explained by a protracted history of impact bombardment that delayed differentiation in a shallow magma ocean on Mars, or perhaps more readily, by the presence of an early and dense atmosphere that acted as an insulator and prevented the magma ocean from cooling quickly.

58 GEOSCIENCES↗
DOE OSTI2021

A crystal plasticity finite element model embedding strain-rate sensitivities inherent to deformation mechanisms: Application to alloy AZ31

We report the fundamental power-law relationship representing the flow rule in crystal visco-plasticity ensures uniqueness in the selection of slip systems accommodating imposed plastic strain-rates. The power-law relationship also introduces an artificially high strain-rate sensitivity in crystal plasticity simulations, unless a high value of the power-law exponent is used. However, the use of high values for the exponent is limited by numerical tractability. This paper presents a numerical method implemented in a crystal plasticity finite element (CPFE) model for embedding any value of the power-law exponent reflecting the true material strain-rate sensitivity. Importantly, the method does not increase computation time involved in the simulations. The enhanced CPFE model is used to interpret and predict a complex strain-rate sensitive response and microstructural evolution of AZ31 Mg alloy. Measured values of strain-rate sensitivity for slip and twinning modes are used in the simulations. Calculations show that the model successfully captures the phenomena pertaining to the effect of changing applied strain-rate on the mechanical response including flow stress and evolution of texture and twinning for a broad range of strain-rates ranging from 10 -3 s -1 to 10 3 s -1 and loading orientations in tension and compression. It is shown that such predictions are a consequence of not only relative amounts of slip and twinning activities driven by a set of accurately characterized hardening law parameters but also values of the strain-rate sensitivities inherent to individual deformation mechanisms. Besides, the model validates the measured strain-rate dependency of deformation mechanisms while accurately reproducing the mechanical data. Hence, the model can be used to verify and further refine or infer measured strain-rate sensitivity per deformation mechanism by reproducing experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Localization of deformation in fluid-saturated sandstone

Herein we discuss a laboratory study of inelastic deformation and localization was conducted to evaluate microseismicity and fracture in fluid-saturated rock. Plane strain compression experiments were performed on oil- and water-saturated Berea sandstone under dry, drained, undrained, and quasi-unjacketed conditions. Parameters associated with the elastic and inelastic material response were accurately measured and used in a constitutive model to predict localization of deformation under the drained and undrained conditions. Acoustic emission (AE) activity was recorded and the onset of inelastic response in fluid-saturated rock, similar to dry rock, coincided with an increase in AE rate. Fracture initiation and propagation were successfully monitored by AE locations. Clustering of AE events and the start of inhomogeneous deformation inferred from displacement measurements are shown to be well correlated with the model prediction of the onset of localized deformation under various rock-fluid interaction conditions.

42 ENGINEERING↗
DOE OSTI2022

Point Defects Control Guest Molecule Diffusion in the 1D Pores of Zn(tbip)

Molecular diffusion plays a critical role in metal-organic frameworks (MOFs) within the application of kinetic chemical separations. We carefully study in this work the unexpected role of point defects for short-chain alkanes diffusing in Zn(tbip), an MOF with rigid one-dimensional (1D) channels. Inside a defect-free Zn(tbip), guest molecules are expected to follow single-file diffusion along 1D channels. It has been found previously by Heinke et al. that these parallel 1D channels are connected for molecular diffusion. Our density functional theory (DFT) calculations suggest that linker vacancy defects could arise under experimentally relevant conditions by removing a pair of linkers. Further climbing-image nudged elastic band (cNEB) DFT calculations indicate that hopping of short-chain alkanes between adjacent 1D channels over defect windows can occur at moderate temperatures. In addition to providing insights into connected adjacent 1D channels in Zn(tbip), Heinke et al. also inferred that most 1D pores are blocked from a microkinetic model. Additionally, we explored the influence of hydrolyzed linker created by the formation of linker removal inside 1D pores. Our DFT calculations show that the linkers can effectively block the pores and the linker diffusion in 1D channels is slow. Our results, for the first time, offer a mechanistic explanation of the unexpected molecular diffusion behavior in this MOF with 1D channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗