Search NASA⌕ Search

SEARCH · Search NASA

Results for “PASSIVATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Surface donor states distribution post SiN passivation of AlGaN/GaN heterostructures

In this paper, we present a physics based analytical model to describe the effect of SiN passivation on two-dimensional electron gas density and surface barrier height in AlGaN/GaN heterostructures. The model is based on an extraction technique to calculate surface donor density and surface donor level at the SiN/AlGaN interface. The model is in good agreement with the experimental results and promises to become a useful tool in advanced design and characterization of GaN based heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of CZTSSe photovoltaic device with an atomic layer-deposited passivation layer

We describe a CZTSSe (Cu{sub 2}ZnSn(S{sub 1−x},Se{sub x}){sub 4}) photovoltaic (PV) device with an ALD (atomic layer deposition) coated buffer dielectric layer for CZTSSe surface passivation. An ALD buffer layer, such as TiO{sub 2}, can be applied in order to reduce the interface recombination and improve the device's open-circuit voltage. Detailed characterization data including current-voltage, admittance spectroscopy, and capacitance profiling are presented in order to compare the performance of PV devices with and without the ALD layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal stability and in situ SiN passivation of InAlN/GaN high electron mobility heterostructures

We investigate the thermal stability of nearly lattice-matched InAlN layers under metal organic vapor phase epitaxy conditions for temperatures >800 °C and show that they are not fully stable. In particular, InAlN top layers undergo degradation during high temperature annealing due to a surface related process, which causes the loss of crystal quality. This strongly impacts the transport properties of InAlN/GaN HEMT heterostructures; in particular, the mobility is significantly reduced. However, we demonstrate that high thermal stability can be achieved by capping with a GaN layer as thin as 0.5 nm. Those findings enabled us to realize in situ passivated HEMT heterostructures with state of the art transport properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A crystalline oxide passivation for Al{sub 2}O{sub 3}/AlGaN/GaN

In situ X-ray photoelectron spectroscopy and low energy electron diffraction are performed to study the formation of a crystalline oxide on the AlGaN surface. The oxidation of the AlGaN surface is prepared by annealing and remote N{sub 2} + O{sub 2} plasma pretreatments resulting in a stable crystalline oxide. The impact of the oxide on the interface state density is studied by capacitance voltage (C-V) measurements. It is found that a remote plasma exposure at 550 °C shows the smallest frequency dispersion. Crystalline oxide formation may provide a novel passivation method for high quality AlGaN/GaN devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Air-stable short-wave infrared PbS colloidal quantum dot photoconductors passivated with Al{sub 2}O{sub 3} atomic layer deposition

A PbS colloidal quantum dot photoconductor with Al{sub 2}O{sub 3} atomic layer deposition (ALD) passivation for air-stable operation is presented. Two different types of inorganic ligands for the quantum dots, S{sup 2−} and OH{sup −}, are investigated. PbS/S{sup 2−} photoconductors with a cut-off wavelength up to 2.4 μm are obtained, and a responsivity up to 50 A/W at 1550 nm is reported. The corresponding specific detectivity is ∼3.4 × 10{sup 8} Jones at 230 K. The 3-dB bandwidth of the PbS/S{sup 2−} and PbS/OH{sup −} photodetectors is 40 Hz and 11 Hz, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Passivation effects in B doped self-assembled Si nanocrystals

Doping of semiconductor nanocrystals has enabled their widespread technological application in optoelectronics and micro/nano-electronics. In this work, boron-doped self-assembled silicon nanocrystal samples have been grown and characterised using Electron Spin Resonance and photoluminescence spectroscopy. The passivation effects of boron on the interface dangling bonds have been investigated. Addition of boron dopants is found to compensate the active dangling bonds at the interface, and this is confirmed by an increase in photoluminescence intensity. Further addition of dopants is found to reduce the photoluminescence intensity by decreasing the minority carrier lifetime as a result of the increased number of non-radiative processes.

36 MATERIALS SCIENCE↗

Defect state passivation at III-V oxide interfaces for complementary metal–oxide–semiconductor devices

The paper describes the reasons for the greater difficulty in the passivation of interface defects of III–V semiconductors like GaAs. These include the more complex reconstructions of the starting surface which already possess defect configurations, the possibility of injecting As antisites into the substrate which give rise to gap states, and the need to avoid As-As bonds and As dangling bonds which give rise to gap states. The nature of likely defect configurations in terms of their electronic structure is described. The benefits of diffusion barriers and surface nitridation are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Metal insulator semiconductor solar cell devices based on a Cu{sub 2}O substrate utilizing h-BN as an insulating and passivating layer

We demonstrate cuprous oxide (Cu{sub 2}O) based metal insulator semiconductor Schottky (MIS-Schottky) solar cells with efficiency exceeding 3%. A unique direct growth technique is employed in the fabrication, and hexagonal boron nitride (h-BN) serves simultaneously as a passivation and insulation layer on the active Cu{sub 2}O layer. The devices are the most efficient of any Cu{sub 2}O based MIS-Schottky solar cells reported to date.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved performance in GaInNAs solar cells by hydrogen passivation

The effect of UV-activated hydrogenation on the performance of GaInNAs solar cells is presented. A proof-of-principle investigation was performed on non-optimum GaInNAs cells, which allowed a clearer investigation of the role of passivation on the intrinsic nitrogen-related defects in these materials. Upon optimized hydrogenation of GaInNAs, a significant reduction in the presence of defect and impurity based luminescence is observed as compared to that of unpassivated reference material. This improvement in the optical properties is directly transferred to an improved performance in solar cell operation, with a more than two-fold improvement in the external quantum efficiency and short circuit current density upon hydrogenation. Temperature dependent photovoltaic measurements indicate a strong contribution of carrier localization and detrapping processes, with non-radiative processes dominating in the reference materials, and evidence for additional strong radiative losses in the hydrogenated solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the role of spatial position of bridged oxygen atoms as surface passivants on the ground-state gap and photo-absorption spectrum of silicon nano-crystals

Silicon nano-crystals (NCs) are potential candidates for enhancing and tuning optical properties of silicon for optoelectronic and photo-voltaic applications. Due to the high surface-to-volume ratio, however, optical properties of NC result from the interplay of quantum confinement and surface effects. In this work, we show that both the spatial position of surface terminants and their relative positions have strong effects on NC properties as well. This is accomplished by investigating the ground-state HOMO-LUMO band-gap, the photo-absorption spectra, and the localization and overlap of HOMO and LUMO orbital densities for prototype ∼1.2 nm Si{sub 32–x}H{sub 42–2x}O{sub x} hydrogenated silicon NC with bridged oxygen atoms as surface terminations. It is demonstrated that the surface passivation geometry significantly alters the localization center and thus the overlap of frontier molecular orbitals, which correspondingly modifies the electronic and optical properties of NC.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nitride passivation of the interface between high-k dielectrics and SiGe

In-situ direct ammonia (NH{sub 3}) plasma nitridation has been used to passivate the Al{sub 2}O{sub 3}/SiGe interfaces with Si nitride and oxynitride. X-ray photoelectron spectroscopy of the buried Al{sub 2}O{sub 3}/SiGe interface shows that NH{sub 3} plasma pre-treatment should be performed at high temperatures (300 °C) to fully prevent Ge nitride and oxynitride formation at the interface and Ge out-diffusion into the oxide. C-V and I-V spectroscopy results show a lower density of interface traps and smaller gate leakage for samples with plasma nitridation at 300 °C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Precise parameterization of the recombination velocity at passivated phosphorus doped surfaces

We investigate the surface recombination velocity S{sub p} at the silicon-dielectric interface of phosphorus-doped surfaces for two industrially relevant passivation schemes for crystalline silicon solar cells. A broad range of surface dopant concentrations together with a high accuracy of evaluating the latter is achieved by incremental back-etching of the surface. The analysis of lifetime measurements and the simulation of the surface recombination consistently apply a set of well accepted models, namely, the Auger recombination by Richter et al. [Phys. Rev. B 86, 1–14 (2012)], the carrier mobility by Klaassen [Solid-State Electron. 35, 953–959 (1992); 35, 961–967 (1992)], the intrinsic carrier concentration for undoped silicon by Altermatt et al. [J. Appl. Phys. 93, 1598–1604 (2003)], and the band-gap narrowing by Schenk [J. Appl. Phys. 84, 3684–3695 (1998)]. The results show an increased S{sub p} at textured in respect to planar surfaces. The obtained parameterizations are applicable in modern simulation tools such as EDNA [K. R. McIntosh and P. P. Altermatt, in Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, Hawaii, USA (2010), pp. 1–6], PC1Dmod [Haug et al., Sol. Energy Mater. Sol. Cells 131, 30–36 (2014)], and Sentaurus Device [Synopsys, Sentaurus TCAD, Zürich, Switzerland] as well as in the analytical solution under the assumption of local charge neutrality by Cuevas et al. [IEEE Trans. Electron Devices 40, 1181–1183 (1993)].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High temperature and low pressure chemical vapor deposition of silicon nitride on AlGaN: Band offsets and passivation studies

In this work, we employed X-ray photoelectron spectroscopy to determine the band offsets and interface Fermi level at the heterojunction formed by stoichiometric silicon nitride deposited on Al{sub x}Ga{sub 1-x}N (of varying Al composition “x”) via low pressure chemical vapor deposition. Silicon nitride is found to form a type II staggered band alignment with AlGaN for all Al compositions (0 ≤ x ≤ 1) and present an electron barrier into AlGaN even at higher Al compositions, where E{sub g}(AlGaN) > E{sub g}(Si{sub 3}N{sub 4}). Further, no band bending is observed in AlGaN for x ≤ 0.6 and a reduced band bending (by ∼1 eV in comparison to that at free surface) is observed for x > 0.6. The Fermi level in silicon nitride is found to be at 3 eV with respect to its valence band, which is likely due to silicon (≡Si{sup 0/−1}) dangling bonds. The presence of band bending for x > 0.6 is seen as a likely consequence of Fermi level alignment at Si{sub 3}N{sub 4}/AlGaN hetero-interface and not due to interface states. Photoelectron spectroscopy results are corroborated by current-voltage-temperature and capacitance-voltage measurements. A shift in the interface Fermi level (before band bending at equilibrium) from the conduction band in Si{sub 3}N{sub 4}/n-GaN to the valence band in Si{sub 3}N{sub 4}/p-GaN is observed, which strongly indicates a reduction in mid-gap interface states. Hence, stoichiometric silicon nitride is found to be a feasible passivation and dielectric insulation material for AlGaN at any composition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, characterization and properties of L-arginine-passivated silver nanocolloids

We investigate the effect of L-arginine-surface passivation on localised surface plasmon resonance (LSPR), size and stability of colloidal Silver Nanoparticles (AgNPs) synthesized by chemical reduction method. The surface Plasmon resonance absorption peak of AgNPs shows blue shift with the increase in L-arginine concentration. Transmission electron microscopy (TEM) analysis confirmed that the average size of AgNPs reduces from 10 nm to 6 nm as the concentration of L-Arginine increased from 1 to 5 mM. The X-ray diffraction study (XRD) confirmed the formation face-centred cubic (fcc) structured AgNPs. FT-IR studies revealed strong bonding between L-arginine functional groups and AgNPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface defect passivation of MoS{sub 2} by sulfur, selenium, and tellurium

Few-layer MoS{sub 2} field-effect transistors often show an n-type conduction behavior due to the presence of high-density sulfur vacancies. Here, we investigated the possibility of surface defect passivation of MoS{sub 2} by sulfur treatment in (NH{sub 4}){sub 2}S solution or coating with an ultrathin layer of selenium or tellurium. It was found that all three elements investigated are able to induce a p-doping effect through suppressing the residual electron concentration by an amount exceeding 0.5 × 10{sup 12 }cm{sup −2} in few-layer MoS{sub 2}. Among them, the sulfur-treatment exhibits the most superior thermal stability that survives thermal annealing at temperatures ≥120 °C for at least 10 h. Tellurium exhibits the strongest p-doping effect due to electron trapping by physisorption-induced gap states near the valence band edge. On the other hand, selenium is highly volatile on MoS{sub 2}; it evaporates and desorbs easily due to Joule heating during electrical measurements in vacuum. The results of first-principles calculations support the experimental observations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Trap state passivation improved hot-carrier instability by zirconium-doping in hafnium oxide in a nanoscale n-metal-oxide semiconductor-field effect transistors with high-k/metal gate

This work investigates the effect on hot carrier degradation (HCD) of doping zirconium into the hafnium oxide high-k layer in the nanoscale high-k/metal gate n-channel metal-oxide-semiconductor field-effect-transistors. Previous n-metal-oxide semiconductor-field effect transistor studies demonstrated that zirconium-doped hafnium oxide reduces charge trapping and improves positive bias temperature instability. In this work, a clear reduction in HCD is observed with zirconium-doped hafnium oxide because channel hot electron (CHE) trapping in pre-existing high-k bulk defects is the main degradation mechanism. However, this reduced HCD became ineffective at ultra-low temperature, since CHE traps in the deeper bulk defects at ultra-low temperature, while zirconium-doping only passivates shallow bulk defects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improving positive and negative bias illumination stress stability in parylene passivated IGZO transistors

The impact of a parylene top-coating layer on the illumination and bias stress instabilities of indium-gallium-zinc oxide thin-film transistors (TFTs) is presented and discussed. The parylene coating substantially reduces the threshold voltage shift caused by continuous application of a gate bias and light exposure. The operational stability improves by 75%, and the light induced instability is reduced by 35%. The operational stability is quantified by fitting the threshold voltage shift with a stretched exponential model. Storage time as long as 7 months does not cause any measurable degradation on the electrical performance. It is proposed that parylene plays not only the role of an encapsulation layer but also of a defect passivation on the top semiconductor surface. It is also reported that depletion-mode TFTs are less sensitive to light induced instabilities. This is attributed to a defect neutralization process in the presence of free electrons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of nitrogen passivation on interface composition and physical stress in SiO 2 /SiC(4H) structures

Here, the electron density and physical stress at the thermally oxidized SiC/SiO 2 interface, and their change with nitrogen incorporation, were observed using x-ray reflectivity, Raman scattering, and a novel stress determination technique. There is no evidence for residual carbon species at the SiO 2 /SiC. Instead, a ~1 nm thick low electron density layer is formed at this interface, consistent with interfacial suboxides (SiO x , 0.3 < x < 2), along with high interfacial stress. Nitrogen passivation, a known process to improve the interface state density and electronic properties, eliminates the low density component and simultaneously releases the interface stress. On the basis of these findings, a new chemical interaction model is proposed to explain the effect of the nitrogen, and a guideline, stress managing together with elemental control of the dielectric/SiC interface, is suggested to achieve high quality gate stack on SiC.

36 MATERIALS SCIENCE↗