Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Analysis of Screen Channel LAD Bubble Point Tests in Liquid Oxygen at Elevated Temperature

The purpose of this paper is to examine the key parameters that affect the bubble point pressure for screen channel Liquid Acquisition Devices in cryogenic liquid oxygen at elevated pressures and temperatures. An in depth analysis of the effect of varying temperature, pressure, and pressurization gas on bubble point is presented. Testing of a 200 x 1400 and 325 x 2300 Dutch Twill screen sample was conducted in the Cryogenics Components Lab 7 facility at the NASA Glenn Research Center in Cleveland, Ohio. Test conditions ranged from 92 to 130K and 0.138 - 1.79 MPa. Bubble point is shown to be a strong function of temperature with a secondary dependence on pressure. The pressure dependence is believed to be a function of the amount of evaporation and condensation occurring at the screen. Good agreement exists between data and theory for normally saturated liquid but the model generally under predicts the bubble point in subcooled liquid. Better correlation with the data is obtained by using the liquid temperature at the screen to determine surface tension of the fluid, as opposed to the bulk liquid temperature.

Hartwig, Jason↗

Superconductivity for CaC{sub 6} to 32 GPa hydrostatic pressure.

The dependence of the superconducting transition temperature T{sub c} of CaC{sub 6} has been determined as a function of hydrostatic pressure in both helium-loaded gas and diamond-anvil cells to 0.6 GPa and 32 GPa, respectively. Following an initial increase at the rate +0.39(1) K/GPa, T{sub c} drops abruptly from 15 to 4 K at {approx}10 GPa. Between 18 and 32 GPa, no superconducting transition is observed above 2 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced magnetic ordering in Sm metal under extreme pressure

The dependence of the magnetic ordering temperature T o of Sm metal was determined through four-point electrical resistivity measurements to pressures as high as 150 GPa. A strong increase in T o with pressure is observed above 85 GPa. In this pressure range, Sm ions alloyed in dilute concentration with superconducting Y exhibit giant Kondo pair breaking. Taken together, these results suggest that for pressures above ~85 GPa Sm is in a highly correlated electron state, like a Kondo lattice, with an unusually high value of T o . Furthermore, a detailed comparison is made with similar results obtained earlier on Nd, Tb, and Dy and their dilute magnetic alloys with superconducting Y.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observations of interplanetary Lyman-alpha with the Galileo Ultraviolet Spectrometer: Multiple scattering effects at solar maximum

The Galileo Ultravilet Spectrometer Experiment (UVS) obtained a partial celestial sphere map of interplanetary Lyman-alpha (IP L alpha) on 13-14 December 1990 during the first Earth encounter. The Galileo spacecraft was near the downwind axis of the local interstellar medium flow. These UVS measurements sampled the downwind, anti-sunward hemisphere. The data were modeled using a hot model of the interplanetary hydrogen density distribution with the goal of studying multiple scattering effects in the inner solar system. The derived ratio in the downwind direction of the observed brightness and a single scattering model brightness, both normalized to unity in the upwind direction, is 1.82 +/- 0.2. This brightness ratio requires a multiple scattering correction which is 36% larger than can be accounted for by theoretical calculations. The hot model may require: (1) a temperature perturbation of the interstellar wind velocity distribution or (2) an additional downstream source of interplanetary hydrogen. However, a more likely exlanation which affects the hot model is the latitude dependence of the radiation pressure. This dependence, based on the known solar L alpha flux latitude variation at solar maximum, causes a downwind brightness enhancement by preferential focusing of H-atoms with trajectory planes containing the solar poles. This result implies that radiation pressure near the solar poles is nearly independent of solar cycle and is insufficient to lead to a net repulsion of hydrogen atoms by the sun, as can occur near the ecliptic plane during the solar maximum. In addition, the UVS performed 13 observations of IP L alpha while in cruise between Venus and the Earth in 3 directions fixed in ecliptic coordinates.

Ajello, J. M.↗

Variation of the pressure limits of flame propagation with tube diameter for propane-air mixtures

An investigation was made of the variation of the pressure limits of flame propagation with tube diameter for quiescent propane with tube diameter for quiescent propane-air mixtures. Pressure limits were measured in glass tubes of six different inside diameters, with a precise apparatus. Critical diameters for flame propagation were calculated and the effect of pressure was determined. The critical diameters depended on the pressure to the -0.97 power for stoichiometric mixtures. The pressure dependence decreased with decreasing propane concentration. Critical diameters were related to quenching distance, flame speeds, and minimum ignition energy.

TEST APPARATUS - FLAME PROPOGATION - LFPL↗

Instrumentation development and testing of a wind turbine blade for sub-scale wake studies

Wind turbine blade aerodynamics and the resulting wake flow are complex, and wind tunnel testing of these flows can provide critical insight. The data from such tests are also valuable for validation of numerical models. For experiments using sub-scale turbines to be useful, the blade aerodynamics and wakes must exhibit the important features observed in utility-scale turbine flows. In this work, ~1 m blades designed to produce physics relevant to larger scale turbines were manufactured and affixed to an existing turbine. One of the blades was instrumented for blade surface pressure measurements. Time-dependent surface pressure measurements coupled with instantaneous measurements of the inflow with Cobra probes and the wake with particle image velocimetry allowed for characterization of the inflow, blade flow, and near wake. The results demonstrate that the instrumentation was effective in characterizing the blade loading and the flow field. For the one test case discussed in this paper, the measurements of inflow, blade loading, and wake properties facilitate understanding of the wake's behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiation pressure on fluffy submicron-sized grains

We investigate the claim that the ratio β of radiation pressure force to gravitational force on a dust grain in our solar system can substantially exceed unity for some grain sizes, provided that grain porosity is high enough. For model grains consisting of random aggregates of silicate spherules, we find that the maximum value of β is almost independent of grain porosity, but for small (<0.3 μm) grains, β actually decreases with increasing porosity. We also investigate the effect of metallic iron and amorphous carbon inclusions in the dust grains and find that while these inclusions do increase the radiation pressure cross-section, β remains below unity for grains with 3 pg of silicate material. These results affect the interpretation of the grain trajectories estimated from the Stardust mission, which were modeled assuming β values exceeding one. We find that radiation pressure effects are not large enough for particles Orion and Hylabrook captured by Stardust to be of interstellar origin given their reported impact velocities. We also consider the effects of solar radiation on transverse velocities and grain spin, and show that radiation pressure introduces both transverse velocities and equatorial spin velocities of several hundred meters per second for incoming interstellar grains at 2 au. These transverse velocities are not important for modeling trajectories, but such spin rates may result in centrifugal disruption of aggregates.

79 ASTRONOMY AND ASTROPHYSICS↗

Critical behavior of resistivity in the pressure-induced first to second order transition in Pr{sub 0.6}Ca{sub 0.4}Mn{sub 0.96}B{sub 0.04}O{sub 3} (B=Co and Cr) polycrystals

We have investigated the hydrostatic pressure (P) dependence of the resistivity on Pr{sub 0.6}Ca{sub 0.4}Mn{sub 0.96}B{sub 0.04}O{sub 3} (B = Co and Cr) polycrystals. At ambient pressure, the temperature dependence of resistivity [ρ(T)] of both the samples show a first order paramagnetic insulator-ferromagnetic metallic transition at T=T{sub IM}. The application of P on both the samples increases the T{sub IM}, reduces the resistivity, and suppresses the hysteresis width, indicating a crossover from first to second order transition. The critical pressure, where the first-second order crossover takes place, are 2.02 and 2.40 GPa for Co and Cr doped samples respectively. The critical property of both systems around second order transition is investigated using Fisher-Langer relation and Suezaki-Mori method. The estimated critical exponents are close to the three-dimensional Heisenberg model for the Co doped sample suggesting short range interaction, and the exponents for the Cr doped sample follow the mean field theory suggesting long range ferromagnetic order. Further, the application of P suppresses the high temperature resistivity by reducing high temperature polarons in the case of the Cr doped sample, but it does not happen for the Co doped sample. The application of P helps to examine the stability of polarons in the high temperature regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure and temperature induced elastic properties of Am and Cf monobismuthides

The pressure and temperature dependent mechanical properties as melting temperature, hardness and brittle nature of XBi (X = Am and Cf) are studied. The rare earth actinides pnictides showed a structural phase transition (B1–B2) at a transition pressure (P{sub T}) of 14.3 GPa (AmBi) and 10.8 GPa (CfBi). Pressure dependence of melting temperature (T{sub m}) discerns an increase inferring the hardening or stiffening of the lattice as a consequence of bond compression and bond strengthening. Suppressed T{sub M} as functions of temperature infers the weakening of the lattice results in bond weakening in XBi (X = Am, Cf). Vickers Hardness (H{sub V}), Poisson’s and Pugh ratio of XBi (X = Am and Cf) demonstrates that XBi (X = Am and Cf) is mechanically stiffened, thermally softened and brittle on applied pressure and temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoscale pressure sensors realized from suspended graphene membrane devices

We study the transport properties of graphene layers placed over ∼200 nm triangular holes via attached electrodes under applied pressure. We find that the injected current division between counter electrodes depends on pressure and can be used to realize a nanoscale pressure sensor. Estimating various potential contributions to the resistivity change of the deflected graphene membrane including piezoresistivity, changing gate capacitance, and the valley Hall effect due to the pressure-induced synthetic magnetic field, we find that the valley Hall effect yields the largest expected contribution to the longitudinal resistivity modulation for accessible device parameters. Such devices in the ballistic transport regime may enable the realization of tunable valley polarized electron sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbon Dioxide Pressure and Catalyst Quantity Dependencies in Artificial Photosynthesis of Hydrocarbon Chains on Nanostructured Co/CoO Surfaces

In this study, we investigated the influence of pressure and the quantity of Co/CoO catalyst on an artificial photosynthesis process that converts CO 2 and H 2 O into hydrocarbons (C n H 2n+2 , where n ≤ 18). The adsorption of CO 2 and H 2 O on Co/CoO surfaces proved to be pivotal in this photo-catalytic reaction. Photoexcited carbon dioxide and water molecules ((CO 2 )* and (H 2 O)*) generated by illuminating the catalyst surface led to the formation of alkene hydrocarbon molecules with carbon numbers following an approximate Poisson distribution. The optimal pressure was found to be 0.40 MPa. Pressure less than 0.40 MPa resulted in low CO 2 adsorption, impeding excitation for photosynthesis. At greater pressure, oil/wax accumulation on Co/CoO surfaces hindered CO 2 adsorption, limiting further photosynthesis reactions. The average number of carbon atoms in the hydrocarbons and hydrocarbon yield were correlated. The amount of Co/CoO was also found to affect the hydrocarbon yield. Our study contributes to the understanding of Co/CoO-catalyzed photosynthesis and suggests that an open-flow system could potentially enhance the productivity of long-chain hydrocarbons.

59 BASIC BIOLOGICAL SCIENCES↗

LDA + $U_{sc}$ calculations of phase relations in FeO

Using the LDA + $U_{sc}$ method, we present calculation phase relations of iron monoxides involving five polytypes in multiple spin-state configurations. In this work, the Hubbard parameter $\textit{U}$ is determined self-consistently simultaneously with the occupation matrix and structures at arbitrary pressures. The Hubbard parameter strongly depends on pressure, structure, and spin state. Comparison with experimental structural data indicates the LDA + $U_{sc}$ can predict structure, compression curves, phase relations, and transition pressures very well for the insulating $\textit{B}$1 and $\textit{iB}$8 states. However, it requires additional calculations using the Mermin functional that includes the electronic entropic contribution to the free energy to obtain an $\textit{nB}$8 metallic state and a consistent $\textit{iB}$8 to $\textit{nB}$8 insulator to metal transition pressure.

36 MATERIALS SCIENCE↗

Nitrogen Monitoring of West Hackberry 117 Cavern Wells

U.S. Strategic Petroleum Reserve (SPR) oil storage cavern West Hackberry 117 was tested under extended nitrogen monitoring following a successful mechanical integrity test in order to validate a newly developed hydrostatic column model to be used to differentiate between normal "tight" well behavior and small-leak behavior under nitrogen. High resolution wireline pressure and temperature data were collected during the test period and used in conjunction with the hydrostatic column model to predict the nitrogen/oil interface and the pressure along the entire fluid column from the bradenhead flange nominally at ground surface to bottom of brine pool. Results here and for other SPR caverns have shown that wells under long term nitrogen monitoring do not necessarily pressurize with a relative rate (P N2 /P brine) of 1. The theoretical relative pressure rate depends on the well configuration, pressure and the location of the nitrogen-oil interface and varies from well to well. For the case of WH117 the predicted rates were 0.73 for well A and 0.92 for well B. The measured relative pressurization rate for well B was consistent with the model prediction, while well A rate was found to be between 0.58-0.68. A number of possible reasons for the discrepancy between the model and measured rates of well A are possible. These include modeling inaccuracy, measurement inaccuracy or the possibility of the presence of a very small leak (below the latest calculated minimum detectable leak rate).

02 PETROLEUM↗

Nitrogen Monitoring of West Hackberry 117 Cavern Wells (Revision 1)

U.S. Strategic Petroleum Reserve (SPR) oil storage cavern West Hackberry 117 was tested under extended nitrogen monitoring following a successful mechanical integrity test in order to validate a newly developed hydrostatic column model to be used to differentiate between normal “tight” well behavior and small-leak behavior under nitrogen. High resolution wireline pressure and temperature data were collected during the test period and used in conjunction with the hydrostatic column model to predict the nitrogen/oil interface and the pressure along the entire fluid column from the bradenhead flange nominally at ground surface to bottom of brine pool. Results here and for other SPR caverns have shown that wells under long term nitrogen monitoring do not necessarily pressurize with a relative rate (P N2 /P brine ) of 1. The theoretical relative pressure rate depends on the well configuration, pressure and the location of the nitrogen-oil interface and varies from well to well. For the case of WH117 the predicted rates were 0.73 for well A and 0.92 for well B. The measured relative pressurization rate for well B was consistent with the model prediction, while well A rate was found to be between 0.58-0.68. A number of possible reasons for the discrepancy between the model and measured rates of well A are possible. These include modeling inaccuracy, measurement inaccuracy or the possibility of the presence of a very small leak (below the latest calculated minimum detectable leak rate).

54 ENVIRONMENTAL SCIENCES↗

Kinetics of OH + CO reaction under atmospheric conditions

A pulsed laser photolysis-pulsed laser-induced fluorescence technique is used to directly measure the temperature, pressure, and H2O concentration dependence on k1 in air. K1 is found to increase linearly with increasing pressure at pressures of not greater than 1 atm, and the pressure dependence of k1 at 299 K is the same in N2 buffer gas as in O2 buffer gas. The rate constant in the low-pressure limit and the slope of the k1 versus pressure dependence are shown to be the same at 262 K as at 299 K. The present results significantly reduce the current atmospheric model uncertainties in the temperature dependence under atmospheric conditions, in the third body efficiency of O2, and in the effect of water vapor on k1.

Hynes, A. J.↗