Search NASA⌕ Search

SEARCH · Search NASA

Results for “Panelized”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Unveiling shared genetic regulators of plant architectural and biomass yield traits in the Sorghum Association Panel

Abstract Sorghum is emerging as an ideal genetic model for designing high-biomass bioenergy crops. Biomass yield, a complex trait influenced by various plant architectural characteristics, is typically regulated by numerous genes. This study aimed to dissect the genetic regulators underlying 14 plant architectural traits and 10 biomass yield traits in the Sorghum Association Panel across two growing seasons. We identified 321 associated loci through genome-wide association studies (GWAS), involving 234 264 single nucleotide polymorphisms (SNPs). These loci include genes with known associations to biomass traits, such as maturity, dwarfing (Dw), and leafbladeless1, as well as several uncharacterized loci not previously linked to these traits. We also identified 22 pleiotropic loci associated with variation in multiple phenotypes. Three of these loci, located on chromosomes 3 (S03_15463061), 6 (S06_42790178; Dw2), and 9 (S09_57005346; Dw1), exerted significant and consistent effects on multiple traits across both growing seasons. Additionally, we identified three genomic hotspots on chromosomes 6, 7, and 9, each containing multiple SNPs associated with variation in plant architecture and biomass yield traits. Chromosome-wise correlation analyses revealed multiple blocks of positively associated SNPs located near or within the same genomic regions. Finally, genome-wide correlation-based network analysis showed that loci associated with flowering, plant height, leaf traits, plant density, and tiller number per plant were highly interconnected with other genetic loci influencing plant architectural and biomass yield traits. The pyramiding of favorable alleles related to these traits holds promise for enhancing the future development of bioenergy sorghum crops.

Singh, Anuradha (ORCID:0000000197149095)↗
DOE OSTI2022

Quantitative Resistance Loci to Southern Rust Mapped in a Temperate Maize Diversity Panel

Southern rust is a severe foliar disease of maize (Zea mays) resulting from infection with the obligate biotrophic fungus Puccinia polysora. This disease reduces photosynthetic productivity, which in turn reduces yields, with the greatest yield losses (up to 50%) associated with earlier onset infections. P. polysora urediniospores overwinter only in tropical and subtropical regions but cause outbreaks when environmental conditions favor initial infection. Increased temperatures and humidity during the growing season combined with an increased frequency of moderate winters are likely to increase the frequency of severe southern rust outbreaks in the U.S. Corn Belt. In summer 2020, a severe outbreak of southern rust was observed in eastern Nebraska, United States. We scored a replicated maize association panel planted in Lincoln, NE for disease severity and found that disease incidence and severity showed significant variation among maize genotypes. Genome-wide association studies identified four loci associated with significant quantitative variation in disease severity. These loci were associated with candidate genes with plausible links to quantitative disease resistance. A transcriptome-wide association study identified additional genes associated with disease severity. Together, these results indicate that substantial diversity in resistance to southern rust exists among current temperate-adapted maize germplasm, including several candidate loci that may explain the observed variation in resistance to southern rust. [Formula: see text] Copyright © 2022 The Author(s). This is an open access article distributed under the CC BY 4.0 International license .

Plant Sciences↗
DOE OSTI2018

Quantifying Year-to-Year Variations in Solar Panel Soiling from PV Energy-Production Data

We present a method for quantifying solar panel soiling loss from PV energy-production data and show how it can be used to quantify year-to-year variations in soiling loss. Cleaning events are automatically detected, eliminating the need for precipitation data or assumptions about cleaning. The method also calculates the reduction of energy yield due to soiling, not just a soiling rate. We apply the method annually and also to multi-year datasets. We find significant year-to-year variation in soiling loss, a result with important implications for site planning and financing. The method presented here can leverage existing datasets of daily energy yield to quantify annual and total soiling risk without the need for new hardware and serves as a supplement to standard plant planning practices.

14 SOLAR ENERGY↗
DOE OSTI2019

Biomass yield in a genetically diverse Miscanthus sinensis germplasm panel evaluated at five locations revealed individuals with exceptional potential

Abstract To breed improved biomass cultivars of Miscanthus ×giganteus, it will be necessary to select the highest‐yielding and best‐adapted genotypes of its parental species, Miscanthus sinensis and Miscanthus sacchariflorus . We phenotyped a diverse clonally propagated panel of 569 M. sinensis and nine natural diploid M . × giganteus at one subtropical (Zhuji, China) and five temperate locations (Sapporo, Japan; Leamington, Ontario, Canada; Fort Collins, CO; Urbana, IL; and Chuncheon, Korea) for dry biomass yield and 14 yield‐component traits, in trials grown for 3 years. Notably, dry biomass yield of four Miscanthus accessions exceeded 80 Mg/ha in Zhuji, China, approaching the highest observed for any land plant. Additionally, six M. sinensis in Sapporo, Japan and one in Leamington, Canada also yielded more than the triploid M . × giganteus ‘1993‐1780’ control, with values exceeding 20 Mg/ha. Diploid M . × giganteus was the best‐yielding group at the northern sites. Genotype‐by‐environment interactions were modest among the five northern trial sites but large between Zhuji, and the northern sites. M. sinensis accessions typically yielded best at trial sites with latitudes similar to collection sites, although broad adaptation was observed for accessions from southern Japan. Genotypic heritabilities for third year yields ranged from 0.71 to 0.88 within locations. Compressed circumference was the best predictor of yield. These results establish a baseline of data for initiating selection to improve biomass yield of M. sinensis and M . × giganteus in a diverse set of relevant geographies.

09 BIOMASS FUELS↗
DOE OSTI2023

Biomass yield in a genetically diverse Miscanthus sacchariflorus germplasm panel phenotyped at five locations in Asia, North America, and Europe

Abstract Miscanthus is a high‐yielding bioenergy crop that is broadly adapted to temperate and tropical environments. Commercial cultivation of Miscanthus is predominantly limited to a single sterile triploid clone of Miscanthus × giganteus , a hybrid between Miscanthus sacchariflorus and M. sinensis. To expand the genetic base of M. × giganteus , the substantial diversity within its progenitor species should be used for cultivar improvement and diversification. Here, we phenotyped a diversity panel of 605 M. sacchariflorus from six previously described genetic groups and 27 M. × giganteus genotypes for dry biomass yield and 16 yield‐component traits, in field trials grown over 3 years at one subtropical location (Zhuji, China) and four temperate locations (Foulum, Denmark; Sapporo, Japan; Urbana, Illinois; and Chuncheon, South Korea). There was considerable diversity in yield and yield‐component traits among and within genetic groups of M. sacchariflorus , and across the five locations. Biomass yield of M. sacchariflorus ranged from 0.003 to 34.0 Mg ha −1 in year 3. Variation among the genetic groups was typically greater than within, so selection of genetic group should be an important first step for breeding with M. sacchariflorus . The Yangtze 2x genetic group (=ssp. lutarioriparius ) of M. sacchariflorus had the tallest and thickest culms at all locations tested. Notably, the Yangtze 2x genetic group's exceptional culm length and yield potential were driven primarily by a large number of nodes (>29 nodes culm −1 average over all locations), which was consistent with the especially late flowering of this group. The S Japan 4x, the N China/Korea/Russia 4x, and the N China 2x genetic groups were also promising genetic resources for biomass yield, culm length, and culm thickness, especially for temperate environments. Culm length was the best indicator of yield potential in M. sacchariflorus . These results will inform breeders' selection of M. sacchariflorus genotypes for population improvement and adaptation to target production environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Surrogate Modeling for Capacity Planning of Charging Station Equipped With Photovoltaic Panel and Hydropneumatic Energy Storage

Due to the promising potential for environmental sustainability, there has been a significant increase of electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEV) in the market. To support this increasing demand for EVs and PHEVs, challenges related to capacity planning and investment costs of public charging infrastructure must be addressed. Hence, in this paper, a capacity planning problem for charging stations is developed and aims to balance the current capital investment costs and future operational revenue. The charging station is assumed to be equipped with the solar photovoltaic (PV) panel and an energy storage system, which could be electric battery or recently invented hydropneumatic energy storage (ground-level integrated diverse energy storage (GLIDES)) system. A co-optimization model that minimizes investment and operation cost is established to determine optimal solution while considering capacity planning and following operations. EV mobility is modeled as an Erlang-loss system. Meanwhile, stochastic programming is adopted to capture uncertainties from solar radiation and charging demand of EV fleet. To provide a more general and computationally efficient model, main configuration parameters are sampled in design space and then fixed in solving the co-optimization model. Sampled parameters include EV charging slots number, PV area, capacity of energy storage system, and daily mean EV arrival number. Based on the sampled parameter combinations and its responses, black-box mappings are then constructed using surrogate models, which could provide insights for charging station placement in different practical situations. The effectiveness of the proposed surrogate modeling approach is demonstrated in numerical experiments. Here, the results indicate better profit advantage of GLIDES over battery system with the increased power capacity

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Variation in morpho-physiological and metabolic responses to low nitrogen stress across the sorghum association panel

Abstract Background Access to biologically available nitrogen is a key constraint on plant growth in both natural and agricultural settings. Variation in tolerance to nitrogen deficit stress and productivity in nitrogen limited conditions exists both within and between plant species. However, our understanding of changes in different phenotypes under long term low nitrogen stress and their impact on important agronomic traits, such as yield, is still limited. Results Here we quantified variation in the metabolic, physiological, and morphological responses of a sorghum association panel assembled to represent global genetic diversity to long term, nitrogen deficit stress and the relationship of these responses to grain yield under both conditions. Grain yield exhibits substantial genotype by environment interaction while many other morphological and physiological traits exhibited consistent responses to nitrogen stress across the population. Large scale nontargeted metabolic profiling for a subset of lines in both conditions identified a range of metabolic responses to long term nitrogen deficit stress. Several metabolites were associated with yield under high and low nitrogen conditions. Conclusion Our results highlight that grain yield in sorghum, unlike many morpho-physiological traits, exhibits substantial variability of genotype specific responses to long term low severity nitrogen deficit stress. Metabolic response to long term nitrogen stress shown higher proportion of variability explained by genotype specific responses than did morpho-pysiological traits and several metabolites were correlated with yield. This suggest, that it might be possible to build predictive models using metabolite abundance to estimate which sorghum genotypes will exhibit greater or lesser decreases in yield in response to nitrogen deficit, however further research needs to be done to evaluate such model.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

RAD-seq genotypes for a Miscanthus sacchariflorus diversity panel

Restriction site-associated DNA sequencing (RAD-seq) data from 643 Miscanthus accessions from a diversity panel, including 613 Miscanthus sacchariflorus, three M. sinensis, and 27 M. xgiganteus. DNA was digested with PstI and MspI, and single-end Illumina sequencing was performed adjacent to the PstI site. Variant and genotype calling was performed with TASSEL-GBSv2, using the Miscanthus sinensis v7.1 reference genome from Phytozome 12 (https://phytozome.jgi.doe.gov). Additional ploidy-aware genotype calling was performed by polyRAD v1.1.

biomass↗
DOE OSTI2024

Characterization of wood fiber insulation for the development of wood fiber-insulated panels (WIPs) for use in building envelope

Wood fiber insulation (WFI) was studied as an eco-friendly alternative for fossil-based building insulation, focusing on its use in new wood fiber-insulated panels (WIPs). Rigid WFI boards with densities of 110, 140, and 180 kg/m³, including a 140 kg/m³ variant without paraffin wax, were evaluated. Key properties investigated included porosity, water vapor transmission, liquid water adsorption, and thermal conductivity. The porosity ranged between 85 and 92%, primarily influenced by density. Water vapor permeability ranged from 65 to 90 ng·s-1m-1Pa-1, while liquid water absorption was between 2.5 and 20% by volume, influenced by both wax and density. The thermal conductivity coefficient ranged from 0.038 to 0.055 W/(m·K). Bond strength tests with WFI (140 kg/m³ with wax) laminated to various materials using structural adhesives showed tensile perpendicular-to-grain strengths of 10 to 16 kPa and shear strengths of 60 to 90 kPa, with failure only occurring within the WFI. It was concluded that WFI is a promising material for novel WIPs, offering competitive hygrothermal properties and compatibility with structural adhesives. However, its bio-based nature suggests variability and complexity, necessitating further rigorous testing in various climates and in more complex assemblies.

Materials Science↗
DOE OSTI2026

Do solar panels contain PFAS?

The presence and potential leaching of PFAS (Per- and Polyfluoroalkyl Substances) from solar panels are increasingly mentioned in news articles, raising public concerns. Such concerns may slow the adoption of photovoltaic (PV) technology, despite its central role in the renewable energy sector. The limited transparency from manufacturers about fluorinated materials used in PV modules, along with the scarcity of publicly available testing data, contributes to uncertainty and speculation. This perspective aims to clarify the current state of PFAS presence in solar PV. Although certain fluoropolymers are used in PV manufacturing, the scientific consensus on their toxicity indicates they should not be classified as PFAS. Portraying fluoropolymers as toxic PFAS unnecessarily amplifies concerns and unfairly undermines the perceived environmental sustainability of PV technology.

environmental impact↗
DOE OSTI2019

Weekly Update - Flat Panel Detector Procurement

The Neutron Imaging (NI) project has procured a Flat Panel Detector (FPD), which will allow multimodal imaging and high-quality CT imaging of dense objects. The FPD will provide a test bed for new scintillator formulations as well as new imaging techniques designed to improve the spatial resolution with which dense objects can be imaged.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

2020 Review Panel Workshop on Energy Intensity Indicators: Summary Findings and Meeting Notes

On January 28-29, 2020, the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), in coordination with Pacific Northwest National Laboratory (PNNL), sponsored an expert workshop focused on energy intensity indicators. The intent of the workshop was to support a comprehensive review of the EERE Energy Intensity Indicators (EII), a national system of indicators used to track changes in the energy intensity of economic sectors. One goal of the workshop was to gather input from a panel of experts who have experience and knowledge related to the EII methodological approach and key data sources used to calculate indicators for each of the end-use sectors of the economy—transportation, residential, commercial, industrial, and electricity. The current EERE EII methodology is documented in a 2017 PNNL report, A Comprehensive System of Energy Intensity Indicators for the U.S.: Methods, Data and Key Trends, which is available online. The workshop also included a presentation by Dr. Beng Ang, who discussed the Log Mean Divisia index (LMDI) approach to decomposition analysis, which was followed by a discussion concerning the methodological approaches that could be applied to future EII efforts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Corrosion Control in Carbon Fiber Reinforced Plastic (CFRP) Composite-Aluminum Closure Panel Hem Joints

This project targeted the implementation of CFRP/Al closure panels as a drop-in replacement for all-aluminum closures used in automobile production today. The project focused on the development of corrosion fundamentals involving CFRP materials and the use of those materials in mixed-material joints. Numerous studies were completed to benchmark current materials and test mixed metal joints. Good correlation was found between outdoor exposures and laboratory cyclic corrosion testing. The insights from the corrosion testing fundamentals and benchmarking phases informed the development of low-cure adhesive and electrocoats and conductive primers for the CFRP. Adhesive and electrocoat materials were successfully developed meeting low-cure targets for bake (150C/10min). These materials were scaled-up and used to produce 5 prototype liftgates to further evaluate CFRP/Al joints in a full-scale part. The lower cure materials enabled mitigation of CTE mismatch and reduced the required bake temperature, resulting in reduced part distortion. Corrosion testing of the liftgates revealed unexpected increases in corrosion relative to the standard bake materials. While rigorous evaluation of the parts was not possible due to numerous complexities associated with prototype testing, the results provided significant insights into the material behavior of CFRP/Al joints. Key learnings from the project included a better understanding of the system complexity (interplay of substrate/primer conductivity, production of full-scale prototypes), advances in coating/adhesive design for low-cure applications involving CFRP, and advancement of corrosion test protocols for CFRP.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reduction of CO 2 Emissions Through Lightweight Body Panels (Project Final Report)

Lightweight construction is an integral part of Volkswagen’s overall strategy of reducing CO 2 emissions. Due to its low cost, steel is the most commonly used material for automotive exterior body panels today. Unfortunately, steel has a high density, resulting in a relatively low specific strength. Glass fiber based sheet molding compounds (SMC) provide high properties in combination with lower density. The high specific strength of SMC offers an enormous lightweight potential. To unlock the full potential of SMC materials in combination with cutting edge manufacturing processes, Volkswagen Group of America worked together with IACMI (Institute for Advanced Composites Manufacturing Innovation) and the academic partners: University of Tennessee Knoxville, Purdue University and Michigan State University; as well as the industry partners: Ashland, IDI, Owens Corning and Continental Structural Plastics. Leveraging the expertise of all project partners, reaching over the entire supply chain the project demonstrated the potential of these materials. This report will highlight the major steps in the development process on the way to technology readiness for SMC using the example of the Volkswagen Atlas Liftgate. Over the 36-month period of the project, the work focused on three R&D areas: material development, design and simulation, and development of the manufacturing process. Material selection included alternative fibers and resin systems, and accounted for material availability, properties, and cost-efficiency. The work undertaken in the field of design and simulation has pushed the envelope of short fiber reinforced thermoset molding compound process simulation. Design iterations were virtually tested, while the final design was used to validate the simulation software against physical parts. Manufacturing development used cutting-edge technology, while experts along the supply chain were working together to ensure the best possible results. In the final stage of the project, liftgates were molded, trimmed, bonded, painted and assembled before exhaustive testing. The result is an e-coat (electrophoretic dip coating) capable Class-A SMC liftgate, which is ready for high-volume production, and can be used as a technology demonstrator. The prototypes manufactured in the scope of this work have exhibited a mass reduction for the Volkswagen Atlas liftgate of up to 35% compared to the series production steel version, without a degradation of the functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-efficiency High-energy Photon Radiography Panels [Slides]

Demonstrate a developmental path towards production of efficient radiography panel for high energy radiography while keeping the production cost reasonable. Fulfill some needs identified in the research thrust GOR 2/K/b "Diagnostics systems".

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

Mask Free OLED Fabrication Process for Non-Tunable and Tunable White OLED Panels

In this program we demonstrated a method for mask free fabrication of OLEDs. Conventional OLEDs use at least 2 shadowmasks during the fabrication process to define the deposition pattern for the organic layers and for the cathode layer. Although effective, the use of masks requires mask handling and mask change equipment which increases the cost of the OLED deposition system. New sets of masks are required for every new product design, and the mask sets require frequent cleaning as organic material builds up on the masks over time and can be a source of particle defects resulting in yield loss. The method investigated in this program uses laser removal of organic material to pattern the organic layers and define a moisture impermeable seal region. This method is digital and can be applied to any new panel design, avoiding the costs of new masks sets and associated yield loss. In addition, we developed a platform technology for producing white color tunable or dim-to-warm white OLEDs and demonstrated patterning of tunable white OLEDs using the low-cost mask free fabrication process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Design Investigation of a Scalable Fast Neutron Radiography Panel

Advances in flat-panel radiography device design have increased the use of radiation imaging as a nondestructive evaluation tool. Neutron radiography offers many advantages compared to photon-based radiography.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗