Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Design of Multi-Stage Solvent Extraction Process for Separation of Rare Earth Elements

Flowsheet design and stage determination for the separation of rare earth elements (REEs) using solvent extraction (SX) is a challenging task because of the chemical similarity of the REEs. Low separation factors between the elements and complex equilibrium chemistry provide unique challenges to designing an efficient flowsheet for the separation of elements. The multi-stage nature of the SX process adds further complexity, making the assessment of products for a proposed design and stage combination difficult. Therefore, to develop a SX flowsheet, it is essential to quantify the performance for various design and separation conditions. This paper attempts to address the challenge by utilizing an equilibrium and process modeling approach. Results from a bench-scale study performed on a 10 g/L rare earth salt mixture were used in studying the extraction/stripping behavior and developing equilibrium models. DEHPA with TBP as a phase modifier was used as an extractant, while hydrochloric acid was utilized as a stripping agent. The results obtained were used in developing extraction/stripping models, which were integrated into a process framework of a SX train in a Matlab/Simulink environment. The models were programmed as a function block routine and used for developing a flowsheet, which was simulated for differing separation and design conditions. To identify optimum stage combinations, a particle swarm optimization (PSO) routine was developed and implemented for each SX train. Recovery and purity of elements of interest were used as objective function criteria. The stage combination leading to the minimization of the objective function was used to identify the optimum stage combination for a series of SX trains to attempt a balance of purity and recovery. The models and optimization method were implemented to separate a feed mixture containing REEs, which indicated that 99.52 and 85.41 percent purity is achievable for Yttrium and Lanthanum separation using 8-12-3 and 10-3-5 stage combination for loading, scrubbing, and striping. The model also indicated difficult separability between neodymium, praseodymium, and cerium.

Srivastava, Vaibhav (ORCID:0000000212645987)↗

Integrands of less-supersymmetric Yang-Mills at one loop

We construct a prescriptive, bubble power-counting basis of one-loop integrands suitable for representing amplitude integrands in less-supersymmetric (1 ≤ $\mathcal{N}$ ≤ 4) Yang-Mills theory. With the exception of massless bubbles, all integrands have unambiguous, leading singularities as coefficients defined in field theory; for the massless bubbles on external legs, we find two natural choices which lead to different integrands that highlight distinct aspects of field theory. For concreteness, we give the all-multiplicity integrands for MHV amplitudes, and the split-helicity amplitude integrand for six-particle NMHV. The basis we construct is mostly pure and is divided into to separately UV- and IR-finite sectors of fixed transcendental weight, resulting in UV- and IR-finite ratio functions of n-particle helicity amplitudes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stirring and peristaltic pumping alter flow electrode particle size and morphology

Flowable carbon-based electrodes are widely studied in electrochemical systems for energy storage and water treatment. Most laboratory- and pilot-scale studies employ active mixing for slurry preparation and handling and use peristaltic pumps for slurry circulation. Magnetic stirring is the most prevalent mixing method at the laboratory scale, and the combination of magnetic mixing and peristaltic pumping is favored for convenience and compatibility with particulate suspensions. However, these methods can strongly affect particle size and morphology (and therefore cell performance). In this study, we evaluate how mixing and pumping influence particle degradation in two commonly used carbon materials: spherical carbon black (CB) beads and powdered activated carbon (AC). We performed 24 h stirring-only experiments using magnetic, orbital, and overhead stirring. Separately, we conducted 32 h circulation experiments using a commercial peristaltic pump. Particle morphology and size were analyzed using optical microscopy and laser diffraction. The initially spherical CB beads (~580 μm, 1.5 wt%) exhibit rapid and extensive breakdown under both peristaltic pumping and magnetic stirring. By comparison, AC particles (initially ~31 μm) tested at 1.5 and 15 wt% showed measurable size reductions of up to ~25 % under either stirring or pumping. In conclusion, these findings highlight the need to account for and quantify morphological changes caused by both stirring and pumping in the design and associated evaluation of flowable electrode systems.

Chemistry↗

SCR and GCR exposure ages of plagioclase grains from lunar soil

The concentrations of solar wind implanted Ar-36 in mineral grains extracted from lunar soils show that they were exposed to the solar wind on the lunar surface for an integrated time of 10E4 to 10E5 years. From the bulk soil 61501 plagioclase separates of 8 grain size ranges was prepared. The depletion of the implanted gases was achieved by etching aliquot samples of 4 grain sizes to various degrees. The experimental results pertinent to the present discussion are: The spallogenic Ne is, as in most plagioclases from lunar soils, affected by diffusive losses and of no use. The Ar-36 of solar wind origin amounts to (2030 + or - 100) x 10E-8 ccSTP/g in the 150 to 200 mm size fraction and shows that these grains were exposed to the solar wind for at least 10,000 years. The Ne-21/Ne-22 ratio of the spallogenic Ne is 0.75 + or - 0.01 and in very good agreement with the value of this ratio in a plagioclase separate from rock 76535. This rock has had a simple exposure history and its plagioclases have a chemical composition quite similar to those studied. In addition to the noble gases, the heavy particle tracks in an aliquot of the 150 to 200 mm plagioclase separate were investigated and found 92% of the grains to contain more than 10E8 tracks/sq cm. This corresponds to a mean track density of (5 + or - 1) x 10E8 tracks/sq cm. The exploration of the exposure history of the plagioclase separates from the soil 61501 do not contradict the model for the regolith dynamics but also fail to prove it.

Etique, P.↗

Combined Modeling of Acceleration, Transport, and Hydrodynamic Response in Solar Flares: The Numerical Model - 1

Acceleration and transport of high-energy particles and fluid dynamics of atmospheric plasma are interrelated aspects of solar flares, but for convenience and simplicity they were artificially separated in the past. We present here self consistently combined Fokker-Planck modeling of particles and hydrodynamic simulation of flare plasma. Energetic electrons are modeled with the Stanford unified code of acceleration, transport, and radiation, while plasma is modeled with the Naval Research Laboratory flux tube code. We calculated the collisional heating rate directly from the particle transport code, which is more accurate than those in previous studies based on approximate analytical solutions. We repeated the simulation of Mariska et al. with an injection of power law, downward-beamed electrons using the new heating rate. For this case, a -10% difference was found from their old result. We also used a more realistic spectrum of injected electrons provided by the stochastic acceleration model, which has a smooth transition from a quasi-thermal background at low energies to a non thermal tail at high energies. The inclusion of low-energy electrons results in relatively more heating in the corona (versus chromosphere) and thus a larger downward heat conduction flux. The interplay of electron heating, conduction, and radiative loss leads to stronger chromospheric evaporation than obtained in previous studies, which had a deficit in low-energy electrons due to an arbitrarily assumed low-energy cutoff. The energy and spatial distributions of energetic electrons and bremsstrahlung photons bear signatures of the changing density distribution caused by chromospheric evaporation. In particular, the density jump at the evaporation front gives rise to enhanced emission, which, in principle, can be imaged by X-ray telescopes. This model can be applied to investigate a variety of high-energy processes in solar, space, and astrophysical plasmas.

STOCHASTIC ACCELERATION MODEL↗

Trapped Positrons and Electrons in the Inner Radiation Belt According to Data of the PAMELA Experiment

Measurements of secondary-electron and secondary-positron fluxes below the geomagnetic cutoff in near-Earth space were performed by means of the PAMELA magnetic spectrometer installed on board the Resurs-DK1 satellite launched on June 15, 2006, in an elliptical orbit of inclination 70° and altitude 350 to 600 km. This spectrometer permits measuring the fluxes of electrons and positrons over a wide energy range, as well as determining their spatial distributions to a precision of about 2°. A calculation of particle trajectories in the geomagnetic field makes it possible to separate electrons and positrons originating from cosmic-ray interactions in the Earth’s magnetosphere. The spatial distributions of quasitrapped, trapped, and short-lived albedo positrons and electrons of energy above 70 MeV in the radiation belt were analyzed. The ratio of the electron-to-positron fluxes and the energy spectra of the electrons and positrons in question are indicative of different productionmechanisms for stably trapped and quasitrapped secondary particles.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dietary transfer of zinc oxide particles from algae (Scenedesmus obliquus) to daphnia (Ceriodaphnia dubia)

Highlights: • Toxicity of ZnO particles on algae and daphnia through dietary transfer was not more in 50 nm ZnO. • Contribution of ZnO {sub (total)} on toxicity was higher than ZnO {sub (ion)} through dietary transfer. • Biomagnification (BMF) ZnO particles was observed from algae to daphnia. • Uptake and accumulation particles caused significant ultra-structural damages in daphnia. The rapid increase in production and usage of ZnO particles in recent years has instigated the concerns regarding their plausible effects on the environment. Current study explores the trophic transfer potential of ZnO particles of different sizes (50, 100 nm and bulk particles) from algae (Scenedesmus obliquus) to daphnia (Ceriodaphnia dubia) and the contribution of ZnO{sub (ions)} (effect of dissolved Zn ions that remain in test medium after separation NPs) to the overall toxicity of ZnO{sub (total)} (impact of both particle and dissolved Zn ions). Toxicity and uptake of ZnO{sub (total)} and ZnO{sub (ions)} in algae were found to be dependent on the concentration and particle size. Feeding of Zn accumulated algae (517 ± 28, 354.7 ± 61 and 291 ± 20 µg/g dry wt.) post-exposure to 61 µM of ZnO{sub (total)} of 50, 100 nm and bulk ZnO particles caused a significant decrease in the survival (15–20%) of daphnia. A significant amount of Zn accumulation was observed in daphnia even after the 48 h depuration period. Biomagnification factor was found to be nearly 1 for all the sizes of ZnO particles tested. For 50 nm ZnO, the BMF was higher when compared to other two sizes, reaching the mean value of 1.06 ± 0.01 at 61 µM. Further analysis revealed that the dietary uptake of different sizes of ZnO particles caused ultra-structural damages and degradation of internal organs in daphnia.

54 ENVIRONMENTAL SCIENCES↗

Isolation and Purification of Monofunctional Methoxyphenols from Loblolly Pine Biocrude

Methoxyphenols (MPs) are valuable chemicals in liquid intermediates from pyrolysis of lignocellulosic biomass. The use of a single technique to recover a high-purity bioproduct of MPs from pyrolysis liquid is challenging. The purpose of this study is to combine distillation and chromatography techniques in sequence to recover exclusively eugenols and guaiacols as monofunctional MPs in biocrude produced from pyrolysis of loblolly pine with a nonzeolite alumina catalyst. A biocrude containing 11.0 wt% of the targeted monofunctional MPs was first distilled in two stages to recover an MP-rich fraction with 49.3 wt% concentration of MPs at a recovery efficiency of 86.9%. A flash chromatography separation using silica gel adsorbent was then used to purify the MP-enriched distillate. A final MP bioproduct with average purity of 87.3-93.1 wt% was achieved. Here, the average efficiency of the chromatography separation step varied between 73.9-82.5% depending on the silica particle size used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

{Kappa}/{pi} fluctuations at relativistic energies.

We report K/{pi} fluctuations from Au+Au collisions at {radical}s{sub NN} = 19.6, 62.4, 130, and 200 GeV using the STAR detector at the Relativistic Heavy Ion Collider. K/{pi} fluctuations in central collisions show little dependence on incident energy and are on the same order as those from NA49 at the Super Proton Synchrotron in central Pb+Pb collisions at {radical}s{sub NN} = 12.3 and 17.3 GeV. We report results for the collision centrality dependence of K/{pi} fluctuations and results for charge-separated fluctuations. We observe that the K/{pi} fluctuations scale with the charged particle multiplicity density.

43 PARTICLE ACCELERATORS↗

CJ PDFs and Impact of Nuclear Corrections on d/U

I will discuss how global QCD fits of parton distribution functions can make the somewhat separated fields of relatively low-energy hadronic physics and high-energy particle physics interact to the benefit of both. In particular, I will argue that gauge boson production at large rapidity has the highest short-term potential to constrain the theoretical nuclear corrections to DIS data on deuteron targets necessary for up/down flavor separation at large x. This in turn can reduce the PDF uncertainty on cross section calculations of heavy mass particles such as W' and Z' bosons.

Accardi, Alberto↗

Symmetry and separability of the neutron diffusion equation

Separation of variables is one of the oldest techniques for solving certain classes of partial differential equations (PDEs). As is the case with many other solution techniques for differential equations, separation of variables may be codified within the broader framework of symmetry analysis. Though the separation of variables technique is frequently used in the nuclear engineering context with various equations describing neutron transport, its connection to the symmetries of those equations has not yet been thoroughly established. It is thus the purpose of this work to establish that connection using neutron diffusion as both an initial step toward analysis of more generally applicable equations, and as a connection to previous results in related problems. Using Lie group analysis, it is found that the traditional space-time separable solution of the neutron diffusion equation (featuring a single α-eigenvalue) corresponds to time translation and flux scaling symmetries. Additional solutions of this equation are also constructed using its broader symmetry set.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Residual Nuclei Production in the reaction {sup 136}Xe+ deuterium at 500 A MeV

More than six hundred nuclei produced in the fragmentation of {sup 136}Xe projectiles at 500 A MeV on a liquid deuterium target were identified using inverse kinematics at the GSI Fragment Separator (FRS). These data are relevant for understanding of spallation reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Handling Radioactive Waste from the Proton Accelerator Facility at the Paul Scherrer Institut (PSI) - Always Surprising? - 13320

The Paul Scherrer Institut (PSI) is the largest national research centre in Switzerland. Its multidisciplinary research is dedicated to a wide field in natural science and technology as well as particle physics. In this context, PSI is operating, amongst others, a large proton accelerator facility since more than 30 years. In two cyclotrons, protons are accelerated to high speeds and then guided along roughly 100 m of beam line to three different target stations to produce secondary particles like mesons and neutrons for experiments and a separately beam line for UCN. The protons induce spallation processes in the target materials, and also at other beam loss points along the way, with emission of protons, neutrons, hydrogen, tritium, helium, heavier fragments and fission processes. In particular the produced neutrons, due to their large penetration depth, will then interact also with the surrounding materials. These interactions of radiation with matter lead to activation and partly to contamination of machine components and the surrounding infrastructures. Maintenance, operation and decommissioning of installations generate inevitably substantial amounts of radioactive operational and dismantling waste like targets, magnets, collimators, shielding (concrete, steel) and of course secondary waste. To achieve an optimal waste management strategy for interim storage or final disposal, radioactive waste has to be characterized, sorted and treated. This strategy is based on radiation protection demands, raw waste properties (size, material, etc.), and requirements to reduce the volume of waste, mainly for legal and economical reasons. In addition, the radiological limitations for transportation of the waste packages to a future disposal site have to be taken into account, as well as special regulatory demands. The characterization is a task of the waste producer. The conditioning processes and quality checks for radioactive waste packages are part of an accredited waste management process of PSI, especially of the Section Dismantling and Waste Management. Strictly proven and accepted methods needed to be developed and enhanced for safe treatment, transport, conditioning and storage. But in the field of waste from research activities, individual and new solutions have to be found in an increasingly growing administrative environment. Furthermore, a wide variety of components, with a really large inventory of radioactive nuclides, has to be handled. And there are always surprising challenges concerning the unusual materials or the nuclide inventory. In case of the operational and dismantling radioactive accelerator waste, the existing conditioning methods are in the process of a continuous enhancement - technically and administratively. The existing authorized specifications of conditioning processes have to be extended to optimize and fully describe the treatment of the inevitably occurring radioactive waste from the accelerator facility. Additional challenges are the changes with time concerning the legal and regulatory requirements - or do we have to consider it as business as usual? This paper gives an overview of the current practices in radioactive waste management and decommissioning of the existing operational accelerator waste. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Three-Particle Coincidence of the Long Range Pseudorapidity Correlation in High Energy Nucleus-Nucleus Collisions

We report the first three-particle coincidence measurement in pseudorapidity ({Delta}{eta}) between a high transverse momentum (p{sub {perpendicular}}) trigger particle and two lower p{sub {perpendicular}} associated particles within azimuth |{Delta}{phi}| < 0.7 in {radical}s{sub NN} = 200 GeV d+Au and Au+Au collisions. Charge ordering properties are exploited to separate the jetlike component and the ridge (long range {Delta}{eta} correlation). The results indicate that the correlation of ridge particles are uniform not only with respect to the trigger particle but also between themselves event by event in our measured {Delta}{eta}. In addition, the production of the ridge appears to be uncorrelated to the presence of the narrow jetlike component.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Observations of Smoke Aerosol from Biomass Burning in Mexico: Effect of Particle Aging on Radiative Forcing and Remote Sensing

We take advantage of the May 1998 biomass burning event in Southern Mexico to test the global applicability of a smoke aerosol size model developed from data observed in South America. The Mexican event is an unique opportunity to observe well-aged, residual smoke. Observations of smoke aerosol size distribution made from vertical profiles of airborne in situ measurements show an inverse relationship between concentration and particle size that suggests the aging process continues more than a week after the smoke is separated from its fire sources. The ground-based radiometer retrievals show that the column-averaged, aged, Mexican smoke particles are larger (diameter = 0.28 - 0.33 micrometers) than the mean smoke particles in South America (diameter = 0.22 - 0.30 micrometers). However, the difference (delta - 0.06 micrometer) translates into differences in backscattering coefficient of only 4-7% and an increase of direct radiative forcing of only 10%.

Remer, Lorraine A.↗

Solvent-Free Melt-Processed Cathode Mitigates Li Anode Instability in Polymer-Based Solid-State Batteries

Solvent-free manufacturing of battery components is a promising alternative to traditional slurry processing for reducing the cost and environmental impact. In this work, we used twin-screw melt extrusion to fabricate a polymer-based high voltage composite cathode. The melt-processed cathode is dense (near zero porosity) and thick (65 μm) and has high active material loading (80 wt %). The active particles are distributed uniformly throughout the melt-processed cathode, unlike the traditional slurry-cast cathode, which exhibits inhomogeneous particle distribution. In the melt-processed cathode, polymer and carbon form separate phases, whereas in the slurry-cast cathode they blend into a single phase. Due to these structural differences, the melt-processed cathode shows smooth charge–discharge profiles, while the slurry-cast cathode shows noisy charging and soft-shorting behavior. In conclusion, this work highlights that twin-screw extrusion as a scalable, solvent-free manufacturing method is advantageous in producing uniform cathodes, which mitigates anode instability.

25 ENERGY STORAGE↗

Shell splitting due to electric fields.

Drift shells of trapped particles starting from a single field line in the earth's magnetic field may become separated owing to an electric field. By using the formalism of the shell-splitting function, this separation is calculated for an arbitrary curl-free time-independent electric field satisfying E.B = 0, with no limitation on the particle's longitudinal excursion. The effect of nondipole field components is also taken into account to the lowest order.

Stern, D. P.↗

Simulation of relativistically colliding laser-generated electron flows

The plasma dynamics resulting from the simultaneous impact, of two equal, ultra-intense laser pulses, in two spatially separated spots, onto a dense target is studied via particle-in-cell simulations. The simulations show that electrons accelerated to relativistic speeds cross the target and exit at its rear surface. Most energetic electrons are bound to the rear surface by the ambipolar electric field and expand along it. Their current is closed by a return current in the target, and this current configuration generates strong surface magnetic fields. The two electron sheaths collide at the midplane between the laser impact points. The magnetic repulsion between the counter-streaming electron beams separates them along the surface normal direction, before they can thermalize through other beam instabilities. This magnetic repulsion is also the driving mechanism for the beam-Weibel (filamentation) instability, which is thought to be responsible for magnetic field growth close to the internal shocks of gamma-ray burst jets. The relative strength of this repulsion compared to the competing electrostatic interactions, which is evidenced by the simulations, suggests that the filamentation instability can be examined in an experimental setting.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗