Search NASA⌕ Search

SEARCH · Search NASA

Results for “ReACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Determination of heat conductivity and thermal diffusivity of waste glass melter feed: Extension to high temperatures

The heat conductivity ({lambda}) and the thermal diffusivity (a) of reacting glass batch, or melter feed, control the heat flux into and within the cold cap, a layer of reacting material floating on the pool of molten glass in an all-electric continuous waste glass melter. After previously estimating {lambda} of melter feed at temperatures up to 680 deg C, we focus in this work on the {lambda}(T) function at T > 680 deg C, at which the feed material becomes foamy. We used a customized experimental setup consisting of a large cylindrical crucible with an assembly of thermocouples, which monitored the evolution of the temperature field while the crucible with feed was heated at a constant rate from room temperature up to 1100°C. Approximating measured temperature profiles by polynomial functions, we used the heat transfer equation to estimate the {lambda}(T) approximation function, which we subsequently optimized using the finite-volume method combined with least-squares analysis. The heat conductivity increased as the temperature increased until the feed began to expand into foam, at which point the conductivity dropped. It began to increase again as the foam turned into a bubble-free glass melt. We discuss the implications of this behavior for the mathematical modeling of the cold cap.

36 MATERIALS SCIENCE↗

Melter Feed Reactions at T ≤ 700°C for Nuclear Waste Vitrification

To understand feed‐to‐glass conversion for the vitrification of nuclear waste, we investigated batch reactions and phase transitions in a simulated nuclear waste glass melter feed heated at 5 K/min up to 700°C using optical microscopy, scanning electron microscopy with energy‐dispersive X‐ray spectroscopy, and X‐ray diffraction. To determine the content and composition of leachable phases, we performed leaching tests; the leachates were analyzed by inductively coupled plasma atomic emission spectroscopy. By 400°C, gibbsite and sodium borates lost water and converted to amorphous phase, whereas other metallic hydroxides dehydrated to oxides. Between 400°C and 700°C, carbonates decomposed before 500°C; amorphous aluminum oxide and calcium oxide reacted with the sodium borate and formed the more durable amorphous borate phase along with intermediate crystalline products; above 500°C, quartz began to dissolve, and hematite started to convert to trevorite.

Xu, Kai↗

Determination of heat conductivity of waste glass feed and its applicability for modeling the batch-to-glass conversion

The heat conductivity of reacting melter feed affects the heat transfer and conversion process in the cold cap (the reacting feed floating on molten glass). To investigate it, we simulated the feed conditions and morphology in the cold-cap by preparing “fast-dried slurry blocks”, formed by rapidly evaporating water from feed slurry poured onto a 200°C surface. A heat conductivity meter was used to measure heat conductivity of samples cut from the fast-dried slurry blocks, samples of a cold cap retrieved from a laboratory-scale melter, and loose dry powder feed samples. Our study indicates that the heat conductivity of the feed in the cold cap is significantly higher than that of loose dry powder feed, resulting from the feed solidification during the water evaporation from the feed slurry. To assess the heat transfer at higher temperatures when feed turns into foam, we developed a theoretical model that predicts the foam heat conductivity based on morphology data from in-situ X-ray computed tomography. The implications for the mathematical modeling of the cold cap are discussed.

Hujova, Miroslava↗

Rheology of simulated radioactive waste slurry and cold cap during vitrification

During the vitrification of radioactive waste in a Joule-heated melter, aqueous melter feed slurry forms a cold cap, a reacting and melting material, which floats on the surface of the molten glass. The rheological behavior of the feed affects cold cap formation and shape, and is vital for modeling the feed-to-melt conversion process. Here, we used slurry feed simulant and fast-dried slurry solids representing the cold cap to investigate the rheological behavior of the feed as it transforms into glass. Both low-temperature and high-temperature rheometry were performed and a new scheme was applied to estimate the feed viscosity. This study shows that the conversion advances in four sequential stages that form distinct regions in the cold cap: (i) a fast-spreading boiling slurry from which water evaporates, (ii) a porous solid region (viscosity > 10 8 Pa s) containing reacting solids and molten salts, (iii) a plastic region in which glass-forming melt connects the refractory solids (~10 8 to ~10 6 Pa s), and (iv) a viscous foam layer in which the viscosity drops from ~10 5 to ~10 1 Pa s. The implications for the mathematical modeling of the cold cap are discussed.

glass melting↗

Viscosity of glass-forming melt at the bottom of high-level waste melter feed cold caps: Effects of temperature and incorporation of solid components

At the final stages of conversion of melter feed (glass batch) to molten glass, the transient glass-forming melt becomes a continuous liquid phase encapsulating dissolving solid particles and gas bubbles that produce primary foam at the bottom of the cold cap (the reacting melter feed in an electric glass melting furnace). The glass-forming melt viscosity plays a dominant role in primary foam formation, stability, and eventual collapse, thus affecting the rate of melting (the glass production rate per cold cap area). For several melter feeds designed for nuclear waste vitrification, we have traced the glass-forming melt viscosity during the final stages of feed-to-glass conversion as it changes in response to changing temperature and composition (resulting from dissolving solid particles). Starting with a relatively low values at the moment when the melt connects, melt viscosity reaches maximum within the primary foam layer and then decreases to its final melter-operating temperature value. We paid a particular attention to the cold-cap bottom—the boundary between the primary foam layer and the thermal boundary layer—where the melt viscosity affects the rate of melting predominantly through its effect on the temperature at which primary foam is collapsing.

Lee, Seung Min↗

Synthesis, Characterization, Photophysics and Photochemistry of Pyrylogen Electron Transfer Sensitizers

A series of new dicationic sensitizers that are hybrids of pyrylium salts and viologens has been synthesized. The electrochemical and photophysical properties of these "pyrylogen" sensitizers are reported in sufficient detail to allow rationale design of new photoinduced electron transfer reactions. The range of their reduction potentials (+0.37-+0.05V vs SCE) coupled with their range of singlet (48-63 kcal mol(-1)) and triplet (48-57kcalmol(-1)) energies demonstrate that they are potent oxidizing agents in both their singlet and triplet excited states, thermodynamically capable of oxidizing substrates with oxidation potentials as high as 3.1eV. The pyrylogens are synthesized in three steps from readily available starting materials in modest overall 11.4-22.3% yields. These sensitizers have the added advantages that: (1) their radical cations do not react on the CV timescale with oxygen bypassing the need to run reactions under nitrogen or argon and (2) have long wavelength absorptions between 413 and 523nm well out of the range where competitive absorbance by most substrates would cause a problem. These new sensitizers do react with water requiring special precautions to operate in a dry reaction environment.

Clennan, Edward L.↗

Development of a Spouted Bed Reactor for Chemical Looping Combustion

We have investigated a novel gas/solid contacting configuration for chemical looping combustion (CLC) with potential operating benefits. CLC configurations are typically able to achieve high fuel conversion efficiencies at the expense of high operating costs and low system reliability. The spouted fluid bed (SB) was identified as an improved reactor configuration for CLC, since it typically exhibits high heat transfer rates and offers the ability to use lower gas flows for material movement compared to bubbling beds (BB). Multiphase Flow with Interphase eXchanges (MFIX) software was used to establish a spouted fluid bed reactor design. An experimental setup was built to supplement the model. The experimental setup was also modified for testing under high temperature, reacting conditions (1073–1273 K). The setup was operated in either a spouted fluid bed or a bubbling bed regime to compare the performance attributes of each. Results for the reactor configurations are presented for CLC using a mixture of carbon monoxide and hydrogen as fuel. Compared to the bubbling bed, the spouted fluid bed reactor achieved an equivalent or better fuel conversion at a lower pressure drop over the material bed. The spouted fluid bed design represents a viable configuration to improve gas/solid contacting for efficient fuel conversion, lower energy requirements for material movement and increase operational robustness for CLC. The research laid the groundwork for future research into a multi-phase reacting flow CLC system. The system will be developed from computational fluid dynamic modeling and pilot-scale testing to expedite the development of CLC technologies.

Energy & Fuels↗

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. Here, this study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in OpenFOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

42 ENGINEERING↗

Numerical Investigation of Ammonia/n-Heptane Dual-Fuel Spray Flames Using Large Eddy Simulations

Diesel engines are extensively used in heavy-duty transportation, power generation, and marine vehicles due to their superior thermal efficiency and extended high-load operability compared to spark ignition (SI) engines. However, combustion in diesel engines is generally characterized by locally rich fuel–air mixtures and high combustion temperatures, causing significant amounts of soot and NO x emissions from these engines. Utilizing carbon-free alternative fuels and enhancing fuel efficiency represent promising strategies to mitigate greenhouse gas (GHG) and other emissions in the heavy-duty transportation sector. In this context, ammonia (NH 3 ), as a hydrogen carrier, has received significant attention as a viable substitute for hydrocarbon fuels due to its carbon-free composition, relatively high energy density, and well-established infrastructure. Many previous studies have considered combustion and emission characteristics of ammonia-hydrocarbon fuel blends in engines and simplified flames. But, detailed investigations on the effects of ammonia on the performance of hydrocarbon fuels under engine conditions are lacking. In the present study, we perform large eddy simulations (LES) of the ignition and flame processes in a constant-volume combustion reactor, where n-heptane is injected in an ammonia/air ambient mixture in a diesel-like environment. A detailed and validated reaction mechanism containing 302 species and 1981 reactions is employed. The Engine Combustion Network Spray H experimental data is used to validate the spray model under both non-reacting and reacting conditions. Dual-fuel combustion is simulated using the well-stirred reactor (WSR) approach. Results are presented for two spray cases: (1) single fuel (SF) with n-heptane injected into a mixture of air and combustion products and (2) dual-fuel (DF) with the injection of n-heptane in a mixture of air, ammonia, and combustion products. It is observed that the presence of ammonia has a significant effect on the ignition and flame development processes. With ammonia addition, both the first- and second-stage ignition delay times increase, but the effect of ammonia on the second-stage ignition is significantly more prominent. In addition, the ignition kernel size and growth rate decrease noticeably. For SF spray, the main ignition is characterized by multiple ignition kernels near the spray tip, whereas for DF spray, a single relatively small ignition kernel forms and grows slowly in the downstream direction. The flame development and the final quasi-steady flame structure are also modified due to ammonia. Here, the outcome of this research would enable a better understanding of ammonia–diesel dual-fuel spray flame behavior and guide the development of associated engine combustion strategies.

ammonia↗

High-Frequency Acoustic Mode Identification of Unstable Combustors

Abstract High frequency thermoacoustic instabilities are becoming increasingly problematic in modern combustion systems. Understanding which acoustic mode is being excited is important for understanding potential mechanisms and control approaches — for example, influence of a helical shear layer mode on the flame has profoundly different effects on the first tangential acoustic mode, than a higher order axial mode of similar frequency. Nonetheless, the modal density increases with frequency and it becomes increasingly difficult to determine which acoustic mode is self-excited, based upon frequency calculations alone. Moreover, access issues and cost usually limit the number of pressure probes that can be distributed axially and azimuthally in the combustor. This paper presents a methodology for identifying the acoustic mode by using high temperature pressure transducers flush mounted in a combustion chamber. Modal identification is demonstrated with a siren under non-reacting conditions. The siren is mounted on the chamber to excite longitudinal and azimuthal waves. Five acoustic sensors at different axial and azimuthal locations measure the pressure fluctuations simultaneously. Given the forcing frequency and the speed of sound, the pressure distribution in the combustor is reconstructed in the time domain from the measured data by using a least squares method to determine its mode shapes. In addition, the finite element method (FEM) solver is used to provide the eigenfrequencies and corresponding mode shapes. The test results demonstrate that the mode shapes from the reconstructed data and corresponding frequencies are consistent with those predicted from the FEM, which validates the methodology in this study. In addition, the methodology is extended to practical reacting cases without the siren to determine the acoustic mode shapes of naturally occurring instabilities. In these cases, the modal features have strong stochastic features, such as what appear to be stochastic variations in overall amplitude and relative amplitudes of clockwise and counterclockwise waves.

Kim, J.↗

Characterization of Heat Transfer in a Trapped-Vortex Combustor Designed for High-Temperature Material Testing

Next generation gas turbines will reduce carbon emissions by improving their cycle efficiencies and implementing hydrogen as a low-carbon fuel. The combined-cycle efficiency can be improved by increasing the combustor outlet temperature and decreasing the cooling air required for hot-section parts. Ultra-high temperature ceramic matrix composites (CMC) can survive increasingly extreme environments due to their strong mechanical properties at expected conditions. The introduction of CMCs in high-hydrogen flame environments requires testing at realistic conditions that mimic the thermochemical and fluid mechanic states in gas-turbine combustors. In this work, we describe a new experiment that has been designed to test high-temperature materials in a combustor-relevant environment. Its trapped-vortex combustor chamber design allows for high levels of fuel flexibility and wide flame stability limits. Testing of monolithic silicon carbide (SiC) samples in this environment was done to characterize the heat transfer to material samples over a wide range of operating conditions, including variations in fuel composition and thermal power. Heat flux measurements were verified in non-reacting and reacting environments after which they were benchmarked with previous literature to verify the operation of the facility with heated air. Testing in combustor-relevant conditions shows high levels of heat flux to the material samples in the combustor, particularly downstream of the anchored flame.

Richins, Porter [Pennsylvania State University , ,↗

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. This study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in Open-FOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS simulation includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

Ge, Wenjun↗

TaN metal gate etch mechanisms in BCl{sub 3}-based plasmas

TaN is a potential candidate for metal gates. BCl{sub 3}-based plasma is used to pattern metal gates because it has a high selectivity over Si substrate and capable of etching metal oxides (native oxides on metal gates and high-k dielectrics). During metal gate etch in inductively coupled plasma reactor, the authors found that the TaN metal gate profile depends on the composition of BCl{sub 3}-based plasma. Pure BCl{sub 3} results in an undercut of TaN. The undercut can be avoided by addition of 5%O{sub 2}, further increase in O{sub 2} concentration (until 10%) does not change the TaN profile. When N{sub 2} is added to BCl{sub 3} plasma, first the undercut disappears (at about 6% of N{sub 2}) and then a slope appears as N{sub 2} concentration increases further (toward 10%). It was found that the profile is controlled by a film deposited from BCl{sub 3}-based plasma. In the case of pure BCl{sub 3} plasma, the film consists of B (50%), Cl (30%), and O (20%). When 5% of O{sub 2} is added, no film is observed, but strong BO and BO{sub 2} peaks appear in the plasma emission spectra. When 5%N{sub 2} is added to the BCl{sub 3} plasma, again a film is deposited, but it contains less Cl (18%). Based on our research, the authors propose the following etch mechanism to explain the observed profile notching/footing. In pure BCl{sub 3} plasma, a B- and Cl-containing film is deposited on the sidewalls of the gate. Cl from this film will react with TaN producing an undercut. When O{sub 2} is added, no film is formed and the TaN profile is straight as B apparently reacts with O in the gas phase, forming volatile BO{sub x} species. Further increase of O{sub 2} content does not change the profile as no film is formed. When N{sub 2} is added to BCl{sub 3}, a film is formed but in this case N replaces Cl and the film becomes passivating leading to a straight TaN profile. As more N{sub 2} is added, the film passivates TaN more efficiently leading to a sloped profile.

36 MATERIALS SCIENCE↗

Interactions of chlorine plasmas with silicon chloride-coated reactor walls during and after silicon etching

The interplay between chlorine inductively coupled plasmas (ICP) and reactor walls coated with silicon etching products has been studied in situ by Auger electron spectroscopy and line-of-sight mass spectrometry using the spinning wall method. A bare silicon wafer mounted on a radio frequency powered electrode (-108 V dc self-bias) was etched in a 13.56 MHz, 400 W ICP. Etching products, along with some oxygen due to erosion of the discharge tube, deposit a Si-oxychloride layer on the plasma reactor walls, including the rotating substrate surface. Without Si-substrate bias, the layer that was previously deposited on the walls with Si-substrate bias reacts with Cl-atoms in the chlorine plasma, forming products that desorb, fragment in the plasma, stick on the spinning wall and sometimes react, and then desorb and are detected by the mass spectrometer. In addition to mass-to-charge (m/e) signals at 63, 98, 133, and 168, corresponding to SiCl{sub x} (x = 1 - 4), many Si-oxychloride fragments with m/e = 107, 177, 196, 212, 231, 247, 275, 291, 294, 307, 329, 345, 361, and 392 were also observed from what appear to be major products desorbing from the spinning wall. It is shown that the evolution of etching products is a complex 'recycling' process in which these species deposit and desorb from the walls many times, and repeatedly fragment in the plasma before being detected by the mass spectrometer. SiCl{sub 3} sticks on the walls and appears to desorb for at least milliseconds after exposure to the chlorine plasma. Notably absent are signals at m/e = 70 and 72, indicating little or no Langmuir-Hinshelwood recombination of Cl on this surface, in contrast to previous studies done in the absence of Si etching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid visible color change and physical swelling during water exposure in triethanolamine-metalcone films formed by molecular layer deposition

Molecular layer deposition (MLD) of “metalcones,” including alucone, zincone, titanicone, and others, involves self-limiting half-reactions between organic and organometallic (or metal-halide) reactants. Studies have typically focused on metal precursors reacting with ethylene glycol or glycerol to form the films' polymeric O-M-O-(CH{sub x}){sub y}-O-M-O repeat units. The authors report new MLD materials that incorporate tertiary amine groups into the organic linkage. Specifically, reacting triethanolamine (TEA) with either trimethylaluminum or titanium tetrachloride produces TEA-alucone (Al-TEA) and TEA-titanicone (Ti-TEA), respectively, and the amine group leads to unique physical and optical properties. Fourier-transform infrared (FTIR) analysis confirms that the films have prominent C-H, C-N, and M-O-C peaks, consistent with the expected bond structure. When exposed to vapors, including water, alcohol, or ammonia, the Ti-TEA films changed their visible color within minutes and increased physical thickness by >35%. The Al-TEA showed significantly less response. X-ray photoelectron spectroscopy and FTIR suggest that HCl generated during MLD coordinates to the amine forming a quaternary ammonium salt that readily binds adsorbates via hydrogen bonding. The visible color change is reversible, and ellipsometry confirms that the color change results from vapor absorption. The unique absorptive and color-changing properties of the TEA-metalcone films point to new possible applications for MLD materials in filtration, chemical absorption, and multifunctional chemical separations/sensing device systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SU-F-T-676: Measurement of Hydroxyl Radicals in Radiolized Water Systems

Purpose: Hydroxyl radicals can be produced within tissue by radiation therapy, and they are largely responsible for DNA damage and cell killing. Coumarin-3-carboxylic acid (3-CCA) and crystal violet are reported to react with hydroxyl radicals and can be used for fluorescence and absorbance measurements, respectively. This study assesses the ability of hydroxyl measurement for both 3-CCA and crystal violet in radiolized water systems in order to provide dosimetric information in radiation chemistry and radiation biology experiments. Methods: 3-CCA and crystal violet were both dissolved in phosphate buffered saline (PBS, pH 7.4) with final concentrations 0.5 mg/mL and 0.05 mg/mL. 3-CCA and control solutions (PBS only) were loaded in black bottom 96-well plates. Crystal violet and control solutions were loaded in clear bottom 96-well plates. The prepared solutions were irradiated at 2 Gy using a small animal radiation research platform. Fluorescence reading with 360 nm excitation wavelength and 485 nm emission wavelength was done for 3-CCA, and absorbance reading at wavelength 580 nm was done for crystal violet before and after radiation. Results: 3-CCA showed clear difference in fluorescence before and after radiation, which suggested hydroxyl production during radiation. However, crystal violet absorbance at 580 nm was not changed significantly by radiation. Conclusion: The overall conclusion is that 3-CCA can be used for hydroxyl measurement in radiolized water systems, while crystal violet cannot, although crystal violet is reported widely to react with hydroxyl radicals produced in Fenton reactions. Possible reasons could relate to reaction pH.

60 APPLIED LIFE SCIENCES↗

Synthesis of Porous Composite Materials via Combustion of a Mixture of Titanium, VT6 Alloy, and Amorphous Boron Powders

Self-propagating high-temperature synthesis without preheating has been realized in powder mixtures consisting of large spherical VT6 titanium alloy granules, small dendritic titanium particles, and black amorphous boron. Synthesis in a combustion wave involved a few steps: first, boron reacted with fine-particle titanium to form a boride matrix, which then reacted with molten VT6 titanium alloy granules. We have obtained a porous metal–ceramic material similar in structure to composites.

36 MATERIALS SCIENCE↗

Dependence of Mechanical Stresses in Silicon Nitride Films on the Mode of Plasma-Enhanced Chemical Vapor Deposition

Films of silicon nitride SiN{sub x}, obtained by plasma-enhanced chemical vapor deposition from the monosilane SiH{sub 4} and ammonia NH{sub 3} gases, are widely used in microelectronics and micro- and nanoelectromechanical systems. Residual mechanical stresses and film composition are important characteristics for many applications. The properties of SiN{sub x} films, particularly mechanical stresses and composition, depend largely on the conditions of production, e.g., the ratio of the reacting gas flow rates, the composition of the gas mixture, the power and frequency of the plasma generator, and the temperature and pressure during deposition. Despite the great volume of works on the subject, data regarding the dependence of the properties and composition of SiN{sub x} films on the conditions of production remain sparse. This work considers the effect the ratio of the reacting gas flow rates has on the mechanical stresses and composition of silicon nitride films SiN{sub x} obtained by plasma-enhanced chemical vapor deposition from gaseous mixtures of SiH{sub 4} monosilane and NH{sub 3} ammonia using low-frequency plasma. It is found that when the ratio of the gas flow rates of SiH{sub 4} and NH{sub 3} is raised from 0.016 to 0.25, the compressive mechanical stresses are reduced by 31%, the stoichiometric coefficient falls from 1.40 to 1.20, the refractive index rises from 1.91 to 2.08, the concentration of N–H bonds is reduced by a factor of 7.4, the concentration of Si–H bonds grows by a factor of 8.7, and the concentration of hydrogen atoms is reduced by a factor of 1.5. These results can be used for the controlled production of SiN{sub x} films with such specified characteristics as residual mechanical stresses, refractive index, stoichiometric coefficient, and the concentration of hydrogen-containing bonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗